I used to sync my local directories via smb4k plus synkron to the server. It works like a charm including kernel 2.6.38.BUT with 2.6.39 it doesn't. /var/log/messages says:
Code:
May 25 18:37:01 linux-yg22 sudo: AW : TTY=unknown ; PWD=/etc/samba ; USER=root ; COMMAND=/usr/bin/smb4k_mount -s -t cifs -o
[code]....
In my case, it occurs intermittently when trying to connect using putty's command line client 'plink.exe' to a linux machine using ssh. For some testing purposes, a linux server is setup with 8K virtual ip addresses and the testing scripts will connect to these ip addresses through ssh using plink.exe. There will be concurrently 25 ssh sessions launched to the server. While it works for sometimes, it throws 'server unexpectedly closed network connection' error intermittently. If the same ip address is tried again manually, it works. While the ssh server is accepting connections, this error is thrown sometimes and unable to find out the reason from the logs. It is not that the ssh connection is completely blocked. It gives this error message while connecting to some of the virtual ip addresses but works some times.
The hosts.deny, sshd_config are tuned to allow the connections, allow more sessions etc.
Is there any way I can install an older version of kde like the on on suselinux 10.1 because the newer desktops are very unstable on my computers. stuff closes, stuff freezes temperarly, fortunetly nothing perminent has happened yet but its been threating to abolish my computer. Ive had other cases like this end up making me reinstall my operating system and Id really like to just fix the problem before it happens. page down is overrun with this horribly lagging scroll.buttons look like there clicking occasionally and again it closes programs and has logged me out once already.
View 9 Replies View RelatedI can make a connection to the vpn server, the connection starts, but nothing happens! My IP address remains the same as previous! There is nothing added to my Knetworkmanager, I'm a beginner I should use a pcf file for my vpn connection. I use it properly, I'm sure because the connection starts and an icon is added to my panel and remains until I disconnect.
I checked it via ifconfig -a, the last part (which is for vpn) is:
Code:
tun0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:141.213.169.76 P-t-P:141.213.169.76 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1390 Metric:1
RX packets:4 errors:0 dropped:0 overruns:0 frame:0
The computer and system in question is the laptop from my description and openSUSE 11.3 with a different kernel from this repository :[URL]..free to move this thread if it should reside in the beta/prerelease forums section. The IMHO relevant information about my hardware and system is shown below.
The kernel I'm using :
Code:
grzes@opensuse:~> Linux opensuse.local 2.6.37.2-1-desktop #1 SMP PREEMPT 2011-02-25 19:59:41 +0100 i686 i686 i386 GNU/Linux
The hardware and drivers I'm using :
Code:
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
[Code]...
I am trying to Setup citrix ICA client 9 on Ubuntu 9.04 Server. I installed it very easily and I am not getting any lib error also. But when I try to connect to the citrix server, it fails with a pop up saying "Error in Network Connection Network or Dialup connection may be preventing ......" This is driving me crazy from 3 days. My project is to check the feasiblity of a Linux desktop
View 1 Replies View RelatedI installed WordPress 3.x on my localhost/Apache server, but I can neither install plugins nor update anything.This happens with both the stable WP3.0 version and the 3.1 beta. When I try to search the Plugin Directory from the WP dashboard, I get this message: An Unexpected HTTP Error occurred during the API request.When I run an update, I get a page asking for the login credentials for the ftp user ("To perform the requested action, WordPress needs to access your web server. Please enter your FTP credentials to proceed. If you do not remember your credentials, you should contact your web host."). Since I'm part of the 'ftp' group on the system, I enter my system login information, click Proceed -- and get a blank page that does nothing.
I've gone to YaST, and I see that the system ftp user has a 6-character password (which may or may not be mine). I'm afraid to change it and risk screwing up other ftp-related functions. I'm running openSUSE 11.3, and am obsessive about updating. I will note that I have an old 2WIRE router that often requires me (including Zypper repos) to enter IP addresses instead of DNS-based URLs to successfully download stuff. Not sure if this is related, but just in case...
Since a few days ago, I have too much problems to connect.When I try to connect to Internet with Firefox, the following message is printed out (, most of the times):Code:Unable to connect Firefox can't establish a connection to the server at URL...
View 9 Replies View RelatedI setup a debian home server some time ago and have successfully setup samba so my windows machines can access them and upload/download data off it.I have setup opensuse on this desktop and after allowing smb through the firewall I now seem to have read only access to the smb shares.I am using the same username and password as I do on my windows machine, so in theory smb server should see my username and password and allow me read/write, like it does in win7. Is this correct?
Having just thought about it I think samba is just a tool to get shares working between linux/windows and macos.Is samba even the best tool for linux - linux sharing? how do I get read/write access to my shares in opensuse?or do I use another program to see my shares?I'm a bit new to this linux- linux sharing so I apologies.
On my linux machine, I've enforced a password expiry policy every 45 days. So, today when I tried to ssh to the host, I get the typical "WARNING: Your password has expired". Fine, no big deal. But when I enter my new password and confirm, instead of giving me a login prompt, it tells me passwd all auth tokens updated successfully, then next line, "Connection to <host> closed". I can re-ssh back into that host and all is well from here, but it's a nuisance having to go through the extra step. Is this something in the /etc/ssh/sshd_config somewhere or perhaps a PAM config issue?
View 2 Replies View RelatedI'm using Ubuntu 6.06 and Apache.I connect to the machine via FTP. It seems as if the connection times out every few seconds. If I u/l a file it will take 15 seconds to connect. Once that connection is open I can u/l more files instantly. If I wait a few seconds it closes, then I have to wait another 15 seconds for it to reopen. Any ideas how to make it not time out so frequently?
View 9 Replies View RelatedOpenSuse 11.4 Asus Netbook 1000H Following other members in the forums I have installed Opensuse 11.4 on the Netbook. In the early days Ubuntu Netbook Remix worked well for me. But this has been discarded, and the "one size fits all" Ubuntu had become slow and cumbersome. So..... onto my post. Opensuse is working well. The install went beautifully.
It detected the Wireless Internet and I am able to get on line. I also need to share the Internet connection to a desktop. This is done via a small network switch. Thus far I cannot do this. I tried to use ifup to configure a static ip but this busted my Wireless configuration. I went back to knetwork manager. Then I tried to set up the wired network using knetwork manager and under IPV4 "share" the connection. But this blanks out any possiblity of a static address and substitutes dhcp. My desktop cannot ping the this dhcp address. Ubuntu had this thing called Firestarter? - from memory. This configured the system to sharing the network.
guide me to connect the SLED 11 SP1 to KEVIN.org (This is the name of my domain I created) Wich i created on windows server 2008.
View 9 Replies View RelatedI am running opensuse with LAMP, and this is my first time setting up this type of server (usually am a windows junkie) My problem i am having is that I am unable to view my website from outside the local network. I have setup my router for a dynamic dns and forwarded all the ports through the router and the local firewall. I ran the apache setup through YAST2 and everything seems fine locally but when i attempt to access it elsewhere its not connecting. computechsolutions.dyndns.biz is the dynamic dns address i have setup through my router.
View 2 Replies View Relatedi just slammed ubuntu 11.04 onto a spare server i had and im having a real issue with remote desktopping from my Win7 computer, ive checked the settings for the remote desktop server on 11.04 and all seem fine, i go to connect to it using tightVNC from my win7 machine, ask's for password, fill that out then click connect, and as soon as i hit connect it connects for about 1 second, then says there was an error contacting the server, i checked 11.04 and it then says that i can only connect via local host and not the IP address anymore.
View 5 Replies View RelatedI'm just installed OpenSuse 11.3 (64) on a 30gb SSD, hoping to get virtualbox 4.0 running to virtualize an instance of Windows 7.I went through some pain with my Nvidia video card and actually getting vb to install, but through lots of searching and tinkering got here.I created a vm in the vb control panel, but when I go to start it I get:
Code:
Failed to open a session for the virtual machine Win7Main.
The virtual machine 'Win7Main' has terminated unexpectedly during startup with exit code 1.
[code]....
Currently I am looking at the following way to solve my problem that uses more than 3GB RAM on 32-bit Ubuntu.
[url]
For various reasons, I am trying to downgrade server kernel to desktop kernel. Can anyone given me some ideas?
I have a system running openSUSE 11.2 with Desktop and XEN kernel, as well as Windows 7 (not by choice though...). I have noticed a strange time issue, with Windows 7 and the desktop kernel the time is correct (like for example now: 1:32 PM) but in the XEN kernel it is ahead several hours (6:32 PM). If it was an issue between openSUSE and windows then I would think that it is a problem with the system clock but I don't know what would cause a time issue between kernels like that.
View 6 Replies View Relateddifferences between Kernel Default and Kernel Desktop? I've found some past threads like this link and this other link, and some other google info, which suggest the only difference would be the io scheduler. Also, I see the default grub choice is "Desktop" and not "Default", so I take this as a suggestion to prefer one over the other.
However, my broadcom 4312 wireless only works on the "default" and not on the "desktop" kernel, so I guess there must be other differences. I just want to evaluate which one is the less long-term risk option to go.
im on node1 when i type the command ssh node2@ip the terminal hangs up a bit then an error message stating that connection timeout but here is a thing: i cant ping to node2
but i can terminate the ping manually using ctrl+c when i terminate the ping usual message appears stating 10 packets transmitted, 100% loss
ps: when i go to node3 and ssh to node2 it works fine and also i can ping from node3 to node2 very fine. and the firewalls are down at all nodes -all wired connection over a switch
default in openSUSE 11.2 we have installed kernel-desktop. This kernel is optimized for the desktop.
What is the name of kernel optimized for server machine? In my case Firebird database + Apache + PHP?
where i can edit the network connection in LXDE desktop? i dont found this option.
View 2 Replies View RelatedI've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
View 4 Replies View RelatedI deleted the firewall files "K09SuSEfirewall2_init", "K01SuSEfirewall2_setup", "S11SuSEfirewall2_setup" and "S01SuSEfirewall2_init" from "/etc/rc.d/rc5.d" in order to disable the firewall when rebooting.
As a consequence all network services are not working. I can't connect to any other machine nor to the internet.
I rebuilt the symbolic files based on the ones for runlevel 3, but still no network services are available.
Any suggestions how to make it work again? I'm using Suse 11.3.
Im new in this world of linux and suse. I have just installed the opensuse 11.2 in a Dell Inspiron 5160. Such laptop has a BCM4306 Wireless LAN controller. When I tried to configure a wlan connection, I found that the firmware was not installed. After looking in different forums, I installed the firmware b43. Now, my wlan card is abled to find the wireless of my router.
I have tried to configure a connection with YAST as well as with Network Manager, but both cases failled. Specifically, when I use Network manager, Im able to see in the applet my connection, how strong is the signal, but I see a yellow symbol (in one forum, such a box is shown with a green symbol).
I have check many time all about the secutity, encryption, and so one and all seems to be correct. But when I open the mozila firefox or the konqueror browser, no chance to surffer in internet. Now Im just a step to become crazy. The drivers are ok, the information about the router and the keys are ok, but in such a way, I am still harmloss.
I installed OpenSuSE 11.3. The only "extra" package I put in after the install was VirtualBox-ose. The firewall is disabled. I gave the machine a static IP address. I can get to the Internet from the machine. I enabled sshd to start on boot with "chkconfig sshd on" and also verified the service is running on the machine. I can ssh user@localhost from the machine as well.
When I try to connect to SSH from another machine, I get a connection refused. I verify that the firewall is down. I also try to get to VNC -- same problem: Connection refused. I ping the machine for fun. If I try to SSH again, it sometimes gives me a logon? I would check the server logs for the connection refused, but I wouldn't know where to look. I started in /var/log/messages, but nothing seemed to jump out there. I also find it strange because I can RDP to a windows guest running under VirtualBox. The Windows guest uses Bridged Network and DHCP.
I also find it interesting that I sometimes type a "ping google.com" from the 11.3 box and it will just hang - no output. Then I open firefox and get to the internet. All of a sudden, ping starts to give output. Could this be a neetwork card issue? A configuration issue? I don't know where to start.
So up until I updated from Opensuse 11.3 to 11.4, I hadn't any issues with my network connection. At least none worth mentioning. Once I installed 11.4, I've had weird issues with varying lengths of connection. Sometimes I can't connect anywhere, sometimes I can only get to the router, sometimes I'm 100%. I'd fiddle with YAST until everything worked. I honestly have no clue whether or not anything I did had any effect.
Enough of the iffy history, here's what's happening now. For the past few weeks up until last night, I have been at 100% connectivity. I never turned off my computer until last night (it just shut itself off, like the cord was unplugged. I dunno what happened, maybe it was my foot, maybe the PSU. I think it has happened before.). When I turned it back on, I was only able to connect as far as my router (192.168.1.1, a D-Link Gaming router that has always been very good to me). I could not make it to my modem (192.168.0.1, a Quest DSL modem. Once I can get here, then usually I'm good to go 100%).
I tried again this afternoon, and no change. I then get the crazy idea to unplug the ethernet cable from it's PCI-card home and return it to the onboard port (which I long ago declared defunct). Immediately after plugging it into that port, I ran "ping 192.168.0.1" and I started getting returns. I open up Firefox and try to load an external page, and nothing happens. I go back to the console that I was pinging from, and it had stopped. I start pinging my router, and no luck. What I conclude from my little experiment is that the router is not at fault.
1. It did not change at all between being at 100% and being at 0% after reboot.
2. I was able to get returns from the modem, past the router, for a brief period of time while using the defunct ethernet port.
Since I never had these problems before updating to 11.4, I'm inclined to believe that it was the update that started these problems.
I have a Broadcom Corporation NetXtreme BCM5721 network card on my server at work.Everything works fine for a few weeks, then randomly the network connection on the server will stop working. After it stops working, I will try to reconnect with the network manager, it shows a wired connection available, it shows the "connection in progress"animation, then the "connection disabled" icon.
I uninstalled the network manager and used manual configuration, but do you think the network manager was the issue? I can't have the server disconnecting randomly every few weeks with no way to know what the real problem is. Was there an issue with the network manager with 10.04?
i get this error
root:/boot# apt-get upgrade
Code:
Setting up desktop-base (5.0.3) ...
Updating /boot/grub/grub.cfg ...
Found linux image: /boot/bzImage
/etc/grub.d/01_OVHkernel: line 37: syntax error: unexpected end of file
[code]....
I just finished a fresh install of 11.3 on an HP 7900 small form factor and have no network connectivity. In Network Tools eth0 shows the state as inactive. Network Connections didn't have a connection, so after letting it create one there is no MAC address. I copied and pasted the MAC address from Network Connections eth0, set up a static address with default gateway, netmask, etc. all set appropriately and rebooted. Still no joy.
I want this to get an address via DHCP, I just set up a static address for testing.11.2 sensed the NIC without issue, but 11.3 doesn't seem to like me right now.I wanted to get this deployed on 40 machines today. Oh well.