OpenSUSE Network :: How To Connect To VPN In 11.4
May 13, 2011I have a VPN network setup in System Settings. The type of connection I am using for the VPN is PPTP. But I do not know how to connect to VPN
View 3 RepliesI have a VPN network setup in System Settings. The type of connection I am using for the VPN is PPTP. But I do not know how to connect to VPN
View 3 RepliesAfter installing 11.4, I need to type in the command to update the firmware for a broadcom wifi adapter. Then I needed to reboot, twice, before the system knew to use the adapter (where the adapter wifi light goes from orange to blue).
Then I needed to add my wireless network and type in my key. But the key does not take. If I click on my wireless network icon, it just re-asks for the key and does not connect nor give any other message. Network icon continues to display no connection.
So I need to reboot again.
When the system starts again, the adapter is blue, I click on the icon for my wifi network and it connects without asking for my key and I can then set to start my wifi by default.
Now my wifi works fine.
I have a Canon MX860 network printer but I cannot get it to connect with my openSUSE 11.2 computer
View 9 Replies View RelatedAll settings are correct as far as i can tell. The wep key works on all my windows boxes. When i have connect automatically enabled it never tries to connect. if I go to edit it it pops kde wallet up i put in credentials. wallet goes away then nothing happens. if i double click connection to my router also nothing happens. I have the wep key in there and i even made it visible to make sure.
View 5 Replies View RelatedI am using OpenSuse 11.3 and Network Manager is giving me a headache by not connecting to WEP based wi-fi network.It works in a wi-fi at my office while at my home, it shows / detects the network but keeps asking me over and over.
View 3 Replies View RelatedI installed OpenSuSE 11.3. The only "extra" package I put in after the install was VirtualBox-ose. The firewall is disabled. I gave the machine a static IP address. I can get to the Internet from the machine. I enabled sshd to start on boot with "chkconfig sshd on" and also verified the service is running on the machine. I can ssh user@localhost from the machine as well.
When I try to connect to SSH from another machine, I get a connection refused. I verify that the firewall is down. I also try to get to VNC -- same problem: Connection refused. I ping the machine for fun. If I try to SSH again, it sometimes gives me a logon? I would check the server logs for the connection refused, but I wouldn't know where to look. I started in /var/log/messages, but nothing seemed to jump out there. I also find it strange because I can RDP to a windows guest running under VirtualBox. The Windows guest uses Bridged Network and DHCP.
I also find it interesting that I sometimes type a "ping google.com" from the 11.3 box and it will just hang - no output. Then I open firefox and get to the internet. All of a sudden, ping starts to give output. Could this be a neetwork card issue? A configuration issue? I don't know where to start.
how to connect my network data card to run internet on openSuse..
View 4 Replies View RelatedI am relatively new at Linux and am having some problems with an install of openSUSE 11.2. I installed 11.2 on my Thinkpad X31 dual boot with WinXP. It seems to work very well except the network. I looked up swerdna's instructions on setting network cards up. I used YaST to try and set the system up as described in swerdna's instructions. Everything looks fine my network card and wireless card show up in the overview settings screen and everything sets up fine. But when I exit YaST the network doest show up no icon in the system tray and it doesn't even try to connect.
I did go into hardware to see if it was identifying my hardware and my network card shows up as "Thinkpad R40" and the wireless shows up as Cisco Aironet Wireless 802.11b. As far as I know this is correct. I have tried three other distro's and this one has gotten the closest to working so far.
the thing is that I cant use Network Manager to connect to Internet, because it simply do not connect. The connection, although, awailable throught yast when i choose "traditional method with ifup", so everything is just fine, but if i need to reconnect, i have to reboot. How do I setup a !working! connection through Network Manager, or maybe i do not do something properly.
View 5 Replies View RelatedI just installed opensuse 11.4 and i'm not being able to connect to my wireless lan. It recognizes my network, but when I click "ok" after typing the password it is like I had done nothing, no connection is set at all.I guess it is probably some configuration stuff since my notebook recognizes all available wireless networks. Sorry about the lack of details, but that is all I got.
View 6 Replies View Relatedi've installed openSuse 11.2 on my laptop (dell studio 15).Today at work i tried to connect to the wireless network, but i couldn't. First, the network card wasn't being recognized, but after a long time trying i was able to set it up, for this i used this command:
Code:
zypper in broadcom-wl broadcom-wl-kmp-desktop
So now, the networkmanager detects all the networks around, but i cannot (or i don't know
[code]...
I'm using opensuse 11.1. I wanted to know if there was a setting somewhere to allow httpd to connect to the network?
View 9 Replies View RelatedWhen i click the button to connect to a wireless network this message apears:Network management disabled
View 1 Replies View RelatedWhen I try to connect to a new network it keeps trying to use the name of the last network I connected to. This has just started happening in the last two months.
View 9 Replies View RelatedI can only connect by wire. I've been reading about the problem with RT2860 in a lot of forums but I still haven't found a solution. As far as I can see from ifconfig and iwconfig, then it works fine. At least it detects everything but I can't connect with ra0. Here is what I got:
[code]...
how I can be able to find my wireless network? I don't know how to write the codes in those 'code-boxes', how do you do that?
I'm having problems using ssh to connect two openSUSE machines. I have a laptop at home, a desktop at school (both running openSUSE 11.4/Tumbleweed) and a server slice that I rent (running Ubuntu 10.04). I can ssh into the Ubuntu server from the laptop, and I can connect from the server to the desktop, but I cannot connect from the laptop to the desktop. Here are the details. Here is what happens when I try to connect from the laptop to the desktop:
[Code]...
I have opensusu 11.3 on my laptop and windows7 on first desktop, and XP on second desktop. Also, on my opensuse laptop I have installed XP as virtual OS in vmware player.I have setup samba using this guide that was given to me on this forum.From opensuse laptop I can see my Win 7 desktop, but cant log in. I enter Win 7 username and password, but it doesn't let me in.
Now, when I start XP trough vmware I can see win 7 desktop and connect it with username and password and browse my shares. On laptop, file sharing works both ways between host opensuse ang guest XP.On second desktop computer with XP, and I can connect to it from opensuse laptop normally.
on ubuntu and windows I use this ip to connect to a nas network windows workgroup smb://192.168.0.1/share/ on opensuse KDE I have tried from dolphin's network all options but none work so how?
View 9 Replies View RelatedI just installed OpenSuse 11.1 on a netbook via network install. It's a dual boot with windows XP. In XP, the wireless card works perfectly, but in openSuse, it never connects. It cann see the wireless networks available but it won't connect to my network!
I even tried this to no avail: Wireless will not work when dual-boot with Windows XP&Vista | SUSE & openSUSE
I'm using:
Asus EEE 1002 HA
Wireless Card: Atheros AR928X Wireless Network Adapter
WPA2 (although when I switched the router to WPA, it still didn't work)
The weird thing is during install I told it to test the wireless card and it worked, but now it doesn't.
trying to make my 3G modem (a ZTE MF622) work with OpenSUSE 11.2. KNetworkManager is recognizing it (so I suppose it's not on Storage Mode), I can create the 3G connection and connect, but I can't navigate on any sites (ping gives "unknown host" for any IP). Also, the KNetworkManager applet doesn't show anything on fields "Name servers" and "Domains" (they are blank). Tried some instructions from the internet here and there, but didn't have any luck.
View 9 Replies View RelatedI am trying Open Suse 11.2 KDE Live CD and don't know how to connect to the Internet. What do I do?
View 9 Replies View RelatedI am experiencing troubles when connecting to my new private network under Linux (works fine with Windows). I cannot get an ip address and the logs tell me a bit more, but I would like to know how to proceed to resolve this issue. My network adapter is an Intel Wifi Link 5100 using the iwlagn driver. Connecting to other WEP APs usually works flawless, it's the first time my system won't connect at all to this particular WEP encrypted access point.
Logs: NetworkManager: pastebin - collaborative debugging tool
wpa_supplicant: pastebin - collaborative debugging tool
I have installed my modem via YaST. It has been detected. but it is a bit odd, when I see this message in Modem Configuration Overview window. Under Modem Device tab I have the followings: this one I believe should be my modem:
HTML Code:
82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller
and this one is my ISP provider settings that I just created.
HTML Code:
modem0 Modem Easy-Dial up
My modem is a PCI modem and it has been detected just fine by SUSE 11.3 but I have this info also at the bottom.
HTML Code:
82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (not connected)
The device is not configured. Press Edit for configuration.and I have no idea about this one, since the modem is installed on the board, what does it mean it is not connected? My problem is after installing the modem i can not make a dial up connection via network manager, because there is no dial up option to choose from. which is also odd.
When I try to do an online update, I get this error:
message: Couldn't resolve host 'download.opensuse.org
I have read everything I can find about this issue but can't resolve it. All my browsers are fine and connect ok. I am connected by DSL through a modem to the AT&T network I have disabled ipv6 in network devices network settings - is there anything else I should do?.
I currently installed openSUSE 11.3 on my laptop. I need to install some packages from repositories, but I had problem. When I add new repository (Index of /pub/packman/suse/11.2/x86_64), error dialog box show up. Here is wahat is written on the dialog box:
Error code: connection failde
Error message: could'nt connect to host
Is it network/internet problem configured on my installation, or admin disable/restricted connection to the host.
i have a hp g62-b31ee laptop that wont connect to any ad-hoc network all the steps is absolutely right-as the book says -
the strange is it connects any non ad-hoc wireless connection and also the wired connections works fine.
PS:if any one wants to know here is my laptop:
Network interface
Integrated 10/100BASE-T Ethernet LAN
Wireless technologies
802.11 b/g/n
Bluetooth wireless networking
I loaded up OpenSuSE 11.4 on a HP DL360 G5 64 bit server. When the server boots up, I can connect via the wan or the local network segment. After some time, I will lose the WAN connection. If I ssh back into the computer from another computer the WAN connection can connect again for a period of time. The WAN connect is from the Internet. The firewall is off and so is AppArmor.
View 9 Replies View Relatedvictor@linux-debn:~> dmesg | grep firmware
[ 8.769511] prism2_usb: Checking for firmware prism2_ru.hex
[ 8.769520] usb 3-1: firmware: requesting prism2_ru.hex
[code]....
I am in a dual boot with Ubuntu and win 7 wireless. When I install 11.3 I no longer have Ubuntu. Is there a process or procedure to assure multiple boot while I attempt to connect suse to my network
View 5 Replies View RelatedI can connect to unsecure routers, but not to any secure routers. NetworkManager doesn't seem to work and neither does anything else I try. I have tried with WPA supplicant but to be honest I have not a clue what to do. I have an Atheros ar5009 card and I'm currently using the ath9k module. Lan works just fine. But my wireless doesn't.
wlan0 IEEE 802.11abgn ESSID:""
Mode:Managed Frequency:2.462 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s Tx-Power=23 dBm
Retry min limit:7 RTS thrff Fragment thr=2352 B
Encryption keyff
Power Managementff
Link Quality=92/100 Signal level:-36 dBm Noise level=-95 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
I have updated everything it seems like, but nothing I do seems to work. I have been at this for almost 3 weeks already hoping for a break and so far nothing.