I am really not sure where to get the flash player and/or video driver. Is it on the DVD like Mandriva, just not installed by default or do you need to search for this online?
View 2 Replies
All of the videos on tennistv are flash. The pre-recorded videos seem to play okay using iceweasel and flashplugin-nonfree but the CPU is very high. When she watches live streamed matches the video stalls and jumps, so I have been trying to figure out why. Tennistv support people say that Linux isn't supported and that streaming is "harder" but don't explain why. They suggested using Google chrome, which did seem to work as well as iceweasel but no better. In desparation I tried XP and it was much better and uses much less CPU.
The only difference I could think of was that flash video hardware acceleration works by default in XP, so I started reading up on Flash video acceleration for linux. The latest Adobe flash player releases appear to support video acceleration, but it's switched off by default. So I upgraded to the latest version and did and then restarted iceweasal if you right click on a flash video you can set hardware acceleration in a tick box, but that seems to be there whether the above is config file is there or not there isn't a live tennis match on again until June 6th. How can I tell if hardware acceleration is actually working or not? The PC is has a 3GHz CPU and 1G RAM. Seems nuts that it can't play video properly. Its a Dell SX280.
I am following the how to at ATI drivers - openSUSE and I am getting an error. I installed the opensuse 11.2 x64bit version and I have a Radeon x600 video card. When trying to install the propietary driver (which I guess I need to enable 3d HCL/ATI Video Cards - openSUSE) I get the following error:
administrator@linux-fsvg:~> su
Password:
linux-fsvg:/home/administrator # zypper in kernel-source linux-kernel-headers kernel-syms module-init-tools
[code]....
I'm running a slightly upgraded Dell Inspiron B120 with 2 Gig RAM, 200 Gig HD. I recently switched this laptop from XP to Ubuntu 9.10. After many a long hour, I was able to get World of Warcraft running under wine but its slow to the point of being unplayable. I was used to slow gameplay on this laptop under XP, but 0 fps is a new low. Dalaran (the notoriously laggiest place in the game) is a joke. There's a 5-10 sec lag between hitting the button to move and actually going anywhere. I took all the video settings down to the minimum and did a regedit to add a key for wine.
Basically I tried all the tips and tricks I could find (including creating an xorg.conf file since I didn't have one). Nothing I did worked. I can be in the most remote, unpopulated spot in the game and I can't get more than 3fps. Somewhere I read that I should install a proprietary driver for my video card (intel GMA 900). So I went out and downloaded xf86-video-intel-2.10.0 and ran the configure script that came with it. It came back and said
Code:
No package 'xorg-server' found
No package 'xproto' found
No package 'fontsproto' found
so I went out and found Xorg-Server-1.7.1 and ran its configure script which gave me
Code:
No package 'x11' found
I tried setting $PKG_CONFIG_PATH to /etc/X11/ with no joy.
Now I am new to linux but in poking around the file system I did see /etc/X11/ which had some stuff in it. To me that says that I've got X11 installed but then again I've been using linux since breakfast so what do I know? What do I need to do to install a proprietary video driver -OR- what can I do to get the game running well enough to be playable (short of walking over to my windows desktop computer)?
i couldn't enable any of the desktop effects. So i searched available drivers and found one for my graphics card. After installing it and rebooting, the system doesn't start, i tried ctrl+alt+f1 for entering in console mode but that doesn't work either.
View 9 Replies View RelatedI am attempting to make a video machine only... which mean I have a Compaq 6435cl and I have installed the latest verion of ubuntu on it. All I want this machine to do is play video from off the net on my LCD HD TV. The video on board was all choppy when going into full screen mode so I put in a 3dfx Voodoo card and the same thing happens. I cannot figure out how to install the drivers for this card in ubuntu so I was wondering if I should by a new video card. Do you have a recomended video card for ubuntu that would push HD video?
View 2 Replies View RelatedI have just installed UBUNTU 10.0.4 (32 bit Generic) on a Compaq CQ50 -AMD Athlon 64 X2 1.9GHZ . The install went flalessly, and everything simply worked out of the box. I also Installed the NVIDIA Propriatery graphics driver, and it worked OK. The box has an NVIDIA GeForce 8200M G. When I did a "free" I discovered that UBUBTU was not using all available RAM. After a bit of research I found that to fix this, I needed to change the kernel to a PAE enabled one. I installed 2.6.32-22-generic-pae #36-Ubuntu SMP Thu Jun 3 23:14:23.On reboot the system complained bitterly that it could not start X. With log entry:
I) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation" compiled for 4.0.2, module version = 1.0.0 Module class: X.Org Video Driver (EE) NVIDIA: Failed to load the NVIDIA
[code]....
So, I selected to boot with the "generic" driver and all was well. I then issued-- nvidia-xconfig command and rebooted again. Same problem, this time I selected to go to shell and did a reboot, thinking that the driver needed to be recompiled for the new kernel, but I got the same result.I believe I am loading an NVIDIA driver into a PAE kernel which is compiled for the non-PAE kernel.I tried to de-Install/Re-Install the propriatery driver while running under the PAE kernel, but the driver still fails to load.
I am trying to install the video driver for my hp a1010n. The video device is a 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics. I have seen a few sites that have referenced this but they were not written for new users and I could not figure out how to install it. I am fairly adept at usage of computers (mostly Windows OS) but am not yet familiar with Ubuntu so I am aware of the absolute basics... I am just not sure what commands to use in the terminal and etc.. I am running Ubuntu 10.04 LTS
View 2 Replies View RelatedI'm using my Ubuntu 10.04 as a server, headless or with HDMI receiver/TV setup. There is a lot's of topics how to make it work headless/VNS. I found the least trouble is to make a fake VGA from old VGA cable and 3 resistors. However, when I start my Ubuntu with Fake VGA it won't switch to HDMI when I turn my Receiver/HDMI on. If I restart X it is fastest way to pick the HDMI Video/7.1 Audio up. I can do it via VNC or ssh and going to do it with 'irexec' so my wife will be able to redetect the HDMI and run XBMC with one button click of the remote.The problem is restarting X kills all my GUI apps (KTorrent, ...). Is there a way to force the video driver to restart or redetect the screens?
View 1 Replies View RelatedHow do I permanently set my video driver to generic? I have an ATI rage 128 pro video card that I just installed because my onboard video wasn't supported. But it will only work if i go through the recovery and run the session with the generic driver. I've tried to get it to run it permanently through the recovery console, but it won't let me select the option.
View 8 Replies View RelatedCPU: Intel i3-2100
Video works OK in Windoze XP but just a black screen in Ubuntu 11.04. when somebody will come up with a working driver?
Yes there are probably about 10 000 security flaws with the old one but the performance of 10.1 just does not cut it for me. I was much happier with the old version and I was stupid enough to let it get upgraded.
View 3 Replies View RelatedJust what the title says, Natty Narwhal doesn't want me on ..... or other Flash powered sites in either Chrome or Firefox. Clicking the "Install Adobe Flash" button sends me to the Adobe website where I can install it, but nothing works.
View 2 Replies View RelatedOpenSUSE 11.1, 64 bit, 2 cores, intel graphics, 4 GB of RAM:_no_ problems
OpenSUSE 11.4, 64 bit, 4 cores, nvidia graphics, 16 GB of RAM:
Problem is very similar to: Problems playing mkv HD films in opensuse but not windows but with enough differences that I start a new thread:
* playback in VLC does not work -- there is only sound
* playback in SMplayer works, however -- when I scroll forward, the video freezes and sound continues, to unfreeze video I have scroll a tiny bit backward
I tried changing the video ouput driver (in SMplayer) from xv to xv/noveu-nvidia, it didn't help. Please note, that I use the same settings (initially) as before in OS11.1.
I'm trying to remove 3Dlabs / Oxygen gmx , and install vesa - Generic VESA-compliant video driver module.How do I remove 3Dlabs / Oxygen gmx ?I can click on VESA in the 'Choose By Name...' , but when I close that box, it shows No Driver.
View 4 Replies View RelatedAs of late I've been getting annoying video anomalies (see attachment) when using nvidias proprietary driver. I'm running ubuntu 11.04 64bit, my card is a 240 GTX and the nvidia driver version is 270.41.06.
View 1 Replies View RelatedI have the most bizarre problem that started with 10.04. Up until 10.04 I had zero problems with my setup. I am convinced this has something to do with NVIDIA 7100GS and 10.04.
Here is the problem in a nutshell. I have my home desktop, which I upgraded to 10.04 from 9.10. Everything went just fine except when it booted up and I logged in, the video "shut off", the computer "hung" for about 10 seconds, then came back. I'm able to use it for about 10 seconds then the same thing happens. Video blanks, system hangs, comes back.
I've tried turning off compiz, no effect. I've tried nvidia-current along with other versions (including the one from the website) and they ALL have the same problem. I know it's not a hardware issue as I can boot the live CD just fine. I also upgraded to 10.04.1 and that worked fine until I installed the nvidia drivers. Here is what I dont understand either. I did a apt-get remove --purge nvidia* and the problem still existed after that.
Something is seriously wonky. I REALLY don't want to re-install the entire box. Now, here is something else that doesnt make sense. I have 10.04 installed on my work box with a Nvidia 9800 graphics card and I have no issues at all.
I recently swapped a hard drive from another computer I was using.The previous computer had nVidia video card (i think it was 9500? something like that), and the new computer has an ATI Radeon 4200 HD video card. Now, when I boot it up on my new comp using the same hard drive, I get a black screen and my monitor just switches from digital, analog, hdmi. I'm guessing that the video card drivers are still installed, but I cannot switch back the hard drive since my other comp is far away from where I live. If I boot up with ubuntu CD however, it loads fine.
I have many important files on the previous install though, and I'm not sure how to get to it. I wouldnt mind reinstalling ubuntu as long as I can get those files back.
Background: I was attempting to install new Nvidia drivers. When they didn't work, I madly attempted to uninstall, reinstall, different drivers and configuration files following advice posted on forums. There were many, many installs and restarts during this process, causing a variety of problems and errors. Currently, I have purged all the nvidia drivers except the nvidia-current ones with the xorg.conf file generated by running nvidia-xconfig.
Current problems: Boot process gets to purple Ubuntu screen with 5 changing dots beneath, but hangs there forever. Pressing esc reveals that the boot process gets to "checking battery state [ok]", but fails to load the login screen. Pressing ctrl-alt F1 allows me to log-in and startx successfully starts Xorg with the proper Nvidia drivers.Question:How can I fix things so that the system does not hang at the Ubuntu loading screen? Or, how can I diagnose what is causing the error?I suspect there may be a problem with the xorg.conf file that's being generated by nvidia-xconfig. Please take a look:
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Thu Apr 22
[code]...
Can anyone tell me how I can find and download Adobe Flashplayer 10 on Ububtu 10.10?
View 1 Replies View RelatedI've Ubuntu 10.04 with Gnome. Howto install flashplayer plugin for Firefox?
I've done the following:
Code:
# sudo apt-get install flashplugin-nonfree
but still doesn't work.
I have downloaded FireFox 4 RC (wow - fast!) and have a Flashplayer issue - the FarmVille game which uses the FlashPlayer does not load - the message was:
Code:
If your game does not load within 10 seconds, you may need to upgrade your version of Flash. Please do so by clicking here I did just that - usually Adobe website will tell you if your FlashPlayer is already up to date for the browser you access with it, OR, give you the option to update (which I did in my case) - but after updating, it still does not bring FarmVille up, and I get the same message, click the Adobe Link, and offers me to update it again.
Anyone know a workaround - because the new Firefox has the speed like Google Chrome does, and FireFox has been my favorite for years, but I have resorted to using Google Chrome for the past several months due to its speed (I have only 1 MB DSL download speed, and it seems that FarmVille is better with such speed).
I'm using openSUSE 11.4 KDE.
I have a problem with the graphics on my thinkpad a22m laptop. specs:
900mhz cpu
256 ram
20gig hd
??ati rage mobility m3 video card ??
when I start up ubuntu (10.10) and reach the desktop, the screen is messed up. The center of the screen becomes blurry, and it looks like what is normally the right part of the screen is duplicated in the middle of the screen (with what should be the middle of the screen disappearing).
I think its an ATI video card, and I tried to install different driver from Softwarecenter but no succes.I know the screen is working, because when I boot forinstance, the Ibm logo is showed nicely across the screen. So its not a hardware issue. Another thing, I got puppy linux to work correctly after having the same grapphic issues on that OS when I first installed it. But some how I managed to get the right drivers. But as I like ubuntu more, I would appriciate your help with figuring this out
ps. when I try to setup screen resolution in System>Settings>"resolution", Ubuntu says "unknown display" (marked with red color).
I'm running OpenSuse 11.2 KDE 3 Initially FireFox was absolutely fine, But recently It became utterly slow. I searched plenty of forums and tweaked the about:config and played around with ipv6. Some threads suggested downgrading some x-video thingy coz of an update sadly I haven't got a clue how to downgrade, in addition all these threads were talking about rather old OpenSuse versions. I installed the newest Nvidia driver as some suggested it might have to do with the desktop effects, actually I just turned them off (literally just this moment) and FF ran utterly quick, hmm I would like to keep em though. Does this mean i need to downgrade that xorg-X11-driver-video thingy? I don't seem to have a downgrade option I can only update delete and so on...When clicking on versions it doesn't show any of the 7.3 only 7.4s. I kind of depend on some firefox plug-ins which is why I would rather not use another browser..
View 9 Replies View RelatedI installed SuSE 11.1 again because of the higher resolution. Installed manually the latest Adobe Flashplayer and all worked well. Now I installed Firefox 3.6 and it also works well except for the flashplayer. I cannot reinstall the player because it is already installed.
hans@linux-acry:~> rpm -qa | grep flash
flash-plugin-10.1.102.64-release
pullin-flash-player-11.1-1.1
flash-player-10.1.102.64-0.1.1
libflashsupport-1.2-4.20
Is there a way to make the player work in the new version FF3.6 or must I de-install and the install again?
OpenSuse 11.2
linux 2.6.31.12-0.2-desktop x86_64
ATI fglrx video driver v10.4
ATI radeon hd3200 video adapter
VirtualBox (any version) crashes at startup if the video acceleration options are enabled. This was not a problem before installing fglrx. The crash occurs when VirtualBox queries the video driver about OpenGL, I am guessing from the log file.
To (supposedly) have access to all of the features possible in the video adapter I installed the ATI fglrx video driver. I (apparently foolishly) chose the custom, installation-specific path rather than the more general default path.
After installing the driver I saw no observable improvement in performance or feature set. Worse, there are couple of new features that are decidedly undesirable, and cannot be disabled. At least one pre-loaded font simply disappeared.
So I reverted to the original (open source?) radeon driver ("sax2 -r -m 0=radeon" at runlevel 3). All seemed welluntil I ran VirtualBox.
One thing I have not tried is to run the fglrx default installation. I fear making things worse.
Can anyone suggest what might have happened with the fglrx installation, and how to fix it?
New pooter, just installed SuSE 11.1. Would appreciate some insight into which Nvidia driver is right for my system, and what is the maximum resolution I can use without potentially causing any damage (if that's even a real concern).Here are the specifics.
[Code]...
So, now the questions.
a) Should I leave both sets of drivers installed, or should I delete one of them?
b) If delete, which should be taken off?
c) If neither of these drivers is the right one, which do you suggest I get instead?
d) I currently have the resolution set at 1920X1440. Is there any reason to worry that I might be overdriving anything and potentially causing damage to the system?
Updated xorg-x11-driver-video-radeonhd few days ago,became so laggy,windows pop up & zoom very slow,it was snappy (I didn't install proprietary driver). My graphic card is integrated ATI Radeon HD3200.
View 5 Replies View RelatedI would like to use Nouveau rather than NVidia proprietary drivers. I am very experienced with Linux but a bit clueless with monitors. I got rather close to a working setup, but just can't get the resolution and maybe H/V sync frequency of my monitor correct.
My system:
OpenSUSE 11.4 32-bit
Gforce 7300
KDE desktop
Acer 21" LCD monitor, non-wide screen, it can do 1600x1200
X configuration: No x.org.conf file, and only one modified file in xorg.conf.d, namely to specify the driver "nouveau" (by the way, is that even needed??) According to lsmod, nouveau loads perfectly. However, KDE starts-up in an odd, non-useful screen resolution. 3d works, slowly, which is OK. I specifically want 1024x768 resolution, but am not able to specify a different resolution in the Display configuration section of the KDE control center (I understand that is perhaps normal).
I tried inserting text into the xorg.conf.d/50-monitor, not really knowing what to add or where and eventually got 1024x768 but the display was unstable, blinking off and on every so-often, and the screen edges were off.I am pretty sure I simply need to put information about my monitor and desired resolution into some file(s) in xorg.conf.d/ or maybe build a dreaded xorg.conf file. I know of the "cvt" utility, and I have a hunch this is part of the solution.
I went back to Suse 11.2, it comes with the 'nv' driver for my NVIDIA Quadro2 Pro (64 MB) and I'm getting some slow performance on browser display and sometimes video playing. Not always, I recently saw a 2 hr long movie on Blue Ray resolution, so the problem is not hardware, it's software. I saw several links here on how to install other drivers and a 1-click install link on this page but my question is, since this is an old card... which driver is the best for this card ?
View 9 Replies View Related
