some dvd's don't work with vlc or kaffeine when I select 'open disc'. Here the log from vlc:
[code]...
Seems this is one of very view disadvantages of a case sensitive OS. Has anyone an idea how I could tell vlc or kaffeine(xine) how to deal with that? I don't want to burn all my dvd's again with capitalised entries.
I've already went thorough "Check your multimedia problem in ten steps" and "Multi-media and Restricted Format Installation Guide", but still no luck. When I try to play video Kaffeine just throw out big red cross and then nothing palys.
Code:
LC_ALL=C zypper ve
Loading repository data...
Reading installed packages...
Dependencies of all installed packages are satisfied.
Code:
rpm --query --all 'libav*' 'libpostproc*' 'libswscale*' '*xine*' '*gst*' MPlayer '*vlc*' | grep -v avahi | sort
bluez-gstreamer-4.56-1.1.1.i586
gstreamer-0_10-0.10.28-999.pm.1001.1.i586
[code]....
After wrestling with Kaffeine on openSUSE 11.2, I thought I had solve the issue I had with it and I got a new error as described below:
Original Issue: Kaffeine will not play a dvd. Error: Cannot find input plugin for MRL
Then: error no longer appeared, but I got a new error.
New error: "Cannot find demux plugin for MRL "dvd:///dev/sr0""
Of course, I could install Demux, but what is this plugin business? Any ideas? Please, if possible include a little information about what MRL refers to.
I am just starting with Opensuse , been on Ubuntu for a few years . I am getting Kaffeine to work with my HVR 1600 . I had to add the firmware to /lib/firmware , then install the xine and ffmpeg files . Now tv scans channels and plays . Actually it plays great . I had skipping problems in Ubuntu with Me-tv , not so with Kaffeine .
View 3 Replies View RelatedDoes anybody know how to get playlists in kaffeine 1.0 work (kde 4.3.5).I am unable to do such a simple thing as create a new play list with content ! (create is ok, read from the temp list ok everything seems to work, but the play list never remmember their content.)
View 2 Replies View RelatedI did a clean install of 11.3 and everything went good but i have a problem. There is no sound when i try to watch a movie in VLC, Kaffeine, SMPlayer and xine. But when i open the movie (.avi format) with Dragon player it plays as it should be. I have sound when i test the output in KDE system settings and i listen to music as i write this message. I tried with Xine and GStreamer output but the problem stays. I have all the multimedia codecs that are needed installed. Here is my repo list:
Code:
[code]....
How to configure Kaffeine to use jack. After I start jack with:
$ jackd -v -d alsa
There is no audio coming from Kaffeine.
I have recently installed 11.2. I am having some sound woes. Vlc plays CDs and DVDs but Kaffeine won't. KsCD won't play CDs. When I try to use Kaffeine to play a CD I get:
Cannot find input plugin for MRL [cdda:/]
Opening kaffeine in the terminal gives:
user@linux-kxg1:~> kaffeine
user@linux-kxg1:~> CDROMREADTOCHDR: No medium found
CDROMREADTOCHDR: No medium found
When I try to use Kaffeine to play a DVD I get:
Cannot find input plugin for MRL [dvd:/]
Do I have to add anything to /etc/fstab? /dev/cdrom and /dev/dvd are pointing to /dev/sr0, but these apps are not seeing the device.
Kaffeine has Empty Video Field, as in it plays a video, the audio comes out but where the video should be is just the screensaver backgroundhrough, even after a reinstallAnyone else having this or had this?Maybe too much fooling around trying to get my tv tuner card working,
View 9 Replies View Relatedthis is my 1st time using linux(opensuse)..i use laptop acer aspire 4710 i already install this os..then i got prob with amarok 2.1.1 and kaffeine..this app can't play..and kaffeine always appear ( error )
[Code]...
I'm using Kaffeine 1.0-svn3 from Packman repo on openSuse 11.2 with KDE 4.3.5. In Kaffeine, I can not find the menu where I can choose the subtitles. (I want to watch an avi-file with a separate subtitle-file in srt format). With openSuse 11.0, KDE 3.5.8. and an older version of Kaffeine, there was a possibility to select subtitle files (srt).
View 5 Replies View Relatedbut after a forum search I only found one similar thread, but seemingly the issue was not totally solved. I just would like to suggest a solution (well, most likely a workaround) for .rmvb Real Player movies which don't work well on Kaffeine, without need to install other players or applications.I first saw many people had similar problems as me: Real Player movies just played sound but not video, or viceversa. I first tried installing w32 codecs, but this seems to be the good solution for 32 bit users, I use 11.3 x64 and didn't work for me. After some Google search I came to this page:Index of /pool/non-free/w/w64codecs/
Seems to be a Medibuntu repository, and I looked for a .tar file, since I was looking for a "w64" version of the codecs. I downloaded the latest .tar.gz file found on the page, the 20071007 one and uncompressed it. It has some codec files and a Readme which tells where to put the files. After that done, without rebooting Suse, I tried again to play the movie, and Kaffeine finally played it well, although now it pops a message saying Kaffeine closed unproperly whenever I close it after having played a .rmvb movie. I think that can be solved by updating Kaffeine, but haven't tried that yet
I tried playing some rmvb videos. I can hear the audio but there is no audio. I followed a few theads related to this but it still hasn't fixed my problem.
One thread says all related packages must be from packman. I have this currently
Code:
mvalviar@mac-mac:~/Desktop> rpm -q kaffeine libxine1 libffmpeg0 w32codec-all xvid libquicktime0
kaffeine-1.2.2-1.pm.1.1.x86_64
libxine1-1.1.19-2.pm.45.33.x86_64
[Code].....
I have just installed openSuse 11.2 (64bit), and I installed the avi codecs as described in Restricted Formats/11.2 - openSUSE-Community with the 1-click installation for KDE. But kaffeine and xine are crashing when I try to play avi files.One thing I found out is that all packages are 64 bit packages only the w32codec-all version is 20071007-0.pm.1.1-i586 and I don't get offered a _64 package. Is this OK? What else could be the problem
View 4 Replies View RelatedError message: Cannot find MRL plugin for [dvd:/]
Trying to play dvd that worked under 11.1 and original dvd version of openSUSE 11.2. It failed after a update.
Not sure which one since I do not normally play dvd movies on my system.
Checked all multimedia rpms and they are all from packman except kaffeine which is KDE4 version.
I'm using openSUSE 11.3 for my laptop and Kaffeine built in as my player. But when I tried to play any files with external subtitles, there is nothing happened. The drop-down list of subtitles is just gray and cannot be used.
So I have two questions:
(1) Can Kaffeine built in openSUSE 11.3 load subtitles automatically?
(2) If it cannot, how to load subtitles manually?
All of a sudden the screensaver starts when I play movies in kaffeine. I noticed this yesterday. It didn't do that before. I don't know what I've done to make this happen. I'm using Kaffeine v. 1.0-svn3 on a 64 bit OpenSUSE 11.3. My screensaver is kometen4 from kde-look.org.
View 1 Replies View RelatedI've installed openSuse 11.3 recently and the sound card is ok because I can play audio with KsCD but there's no sound at all with any of the other players or browsers. Video now is ok after installing Packman Repository etc, but still no sound.
View 3 Replies View RelatedI have HDMI sound enabled by default in System Configuration (Music, Movies and System Sounds), but the only multimedia application that uses it is DragonPlayer. (System Sounds work fine also)Kaffeine still wants to use my INTEL card as does Amarok; VLC Player just complains that my AlsaLib file isn't up to date.I am running opensuse 11.3, KDE 4.5.90 (4.6 RC1) Kernel 2.6.34-7-0.5-desktop sound is outputting to a Samsung 42" 1080p TV.
Sound/Video card is an ATI RV710 (Radeon HD 4350). What does DragonPlayer do that the other three applications do not?How can I configure Kaffeine and VLC to output via the HDMIAlso since doing a system update to KDE 4.5.90 my screen blanks every ten minutes, I have tried to disable screen saver and screen power save in power management, however still i can't stop the system blanking every 10 minutes any clues?Finally DragonPlayer is now crashing after every video has finished playing before i can start the next
I Tried to play video files (.avi & .vob) in Kaffeine, but was unableo hear any audio. Then i went to the packmn site and installed the packageom there, with no positive results.After that i installed VLC and then tried playing.
View 2 Replies View RelatedI have just installed 11.4 64bit and duly followed the sticky guide for getting the required multimedia files installed. I find I have a problem with playing audio cd's the only program which will play an audio cd is Kaffeine but it does not play properly - it plays a few bars then silence, plays a few bars then silence and I can find no way of getting it to play without interruption. There are no sound problems with Kaffene when using it to play digital tv or dvd films. I have tried KsCD, Amarok, Mplayer, SMPlayer, and GNOME MPlayer none of which can I get to play a CD. With Amarok there does not appear to be a setting to play a CD as soon as it is put in the drive it would appear that you have to generate a playlist first, I can show the list of tunes on the CD but that's a far as it goes they will not add to a playlist or play.
Have just found the player Clementine which apparently is based on Amarok. Although not providing a direct play facility I was able to load the cd to the playlist then play the tunes. This may be a clue to my problems in that I noticed that it had to mount the player first. Is there a setting for auto mounting?Ideally I would like to put an audio cd in my player and have it play automatically without me having to do anything. Is this facility available in 11.4 and if so which program do I need to install?
Is there a way to autoplay a DVD when a (valid) VIDEO_TS folder is opened? Mos media players play VIDEO_TS folders but you have to start the player first and then select the folder. I am looking for a way so the media player(vlc) starts automaticly to play when I try to open the video_ts folder. A other option could be a right click option: play movie ith vlc (or something) Is this possible?
View 1 Replies View RelatedI used DVD::RIP to make an AVI out of a VIDEO_TS folder, however it compressed it from 4gb to 1gb and the quality is uh.. kind of bad. How can I make an AVI out of a VIDEO_TS "video folder" without losing much quality? Size of the file doesn't matter.
View 1 Replies View RelatedI've searched but I can't seem to find something that is specific to what I'm looking for. I need to create an ISO from a VIDEO_TS folder on my hard drive. How would I go about that?
View 9 Replies View RelatedThis may be a stupid question, but with Movie Player, how do I play a video_ts video? In VLC under media it has the option to open a directory, which is self explanatory that the video_ts option falls under. What about Movie Player?
View 9 Replies View RelatedI was looking for some film info and ended up at the Apple quicktime website. Clicked on the video preview option (expecting nothing to happen) and it played in a kaffeine window.
View 4 Replies View RelatedI've been away from Linux for a while, so I need to get informed about some of the 32- vs. 64-bit issues concerning video players and codecs. So, what is everyone using these days?
More specifically, is it possible to play, e.g., .wmv files with 64-bit Kaffeine (my favorite player) or any other 64-bit video player? If so, then which combination of player and codec should I use?
Some wierd issue here: when i sued verison 10.04 i could right click on the VIDEO_TS an select "open with Vlc". Now i'm running 10.04.2 and that option is gone. And it cannot be fixed either. Right click gives me what is shown in the screenshot (excuse me for the language, it is in Dutch).
View 9 Replies View RelatedI am having an issue with Kaffeine. It recognizes my DVB tuner fine and I can watch television but the only problem is that I have no sound. Videos play fine, in Kaffeine, I can see the picture and hear the sound, but when I view television, the sound is quiet. I think that there is some issue with unusual sound codecs being used here in New Zealand, as I had a lot of problems trying to play my recorded tv programs in other software, when I was a Windows user, I would often get the picture but no sound. Mythtv works fine for me, I get sound and picture no worries, it's just with Kaffeine I have the sound issues. The audio channel is greyed out, when I click on a channel and then click on edit. I suspect that this may mean that the sound codec that Freeview television uses, in New Zealand, may not be supported in Kaffeine.
View 6 Replies View RelatedI found a forum for Kaffeine but I wonder if there is actual documentation? Although I can play any video or stream with it, I do not understand many things like time shifting or program guide. There are config links in the menu but they really only have 2 or 3 options. Nothing about Kaffeine is explained. I would think that a program that works so well and is so popular would be documented.
View 1 Replies View Related