OpenSUSE Multimedia :: Any Way To Incorporate VLC Into Firefox?
Dec 11, 2010There must be a way to incorporate VLC into Firefox. So that it will play a .mov file in a new tab or even a .wmv. Does anyone use VLC for this?
View 5 RepliesThere must be a way to incorporate VLC into Firefox. So that it will play a .mov file in a new tab or even a .wmv. Does anyone use VLC for this?
View 5 RepliesI'm following an openvpn installtion how to and it says to add this to the iptables:
Quote:
# External Interface for VPN
# VPN Interface
VPNIF="tun0"
VPNNET="172.16.0.0/24"
VPNIP="172.16.0.1"
### OpenVPN
[Code]....
Any thoughts as the whole formatting is separate and has the addition of FORWARD rules, etc. I need the VPN running on the .199 address
I am working on setting up some networking connections here. [URL]. Depending on your router make and model. You can disable the dhcp server on the router if you go to advanced setup and in the dhcp option You should find two radio buttons off and on click off and you will disable the dhcp server on the router refer to your router documentations. I do not wish to disable the DHCP on my router (2wire). I have fixed the router so it assigns static IP addresses - by following the Management and Console Diagnostic" portion on this page: [URL]. There are 7 machines getting IP addresses from the 2wire router. Of the 7, I have configured 4 to have static IP addresses allocated to them by the router.
For example, the domain here is : 2wire.gateway.net
If I have a host named "zazu", and I ping zazu.2wire.gateway.net, I get the right IP address.
I am working with a product (ZIMBRA) that
-> requires for the host to "have MX records".
-> that you get a FQDN when typing "hostname"
-> that you get a FQDN when typing "hostname -f"
Basically, the way it is supposed to be set up is:
ZIMBRA (internal) <----> Kerio Mail Server (Windows) <---> email from the outside world
So, in a sense, the Kerio Mail Server is to forward mail received from the outside world to ZIMBRA and ZIMBRA is to send mail to the Kerio Mail Server to send it to the outside world. From what I see at these links: [URL] And [URL]. You have to set up some kind of DNS server? Why? Don't both the DHCP server and DNS server serve the same thing? How can I incorporate a DNS server into my setup when the 2wire (with DHCP) is working just fine?
I have triple booted Windows XP (195 GB)partition 0? the second partition is Windows 7 (195 GB)And the rest of a 1TB hard drive went to Open Suse 11.3. if it makes any difference I used g parted to create the three partitions and made them all primary. My problem is I want to change the way they all get along. When I boot up, I get the options;
Desktop -- openSUSE 11.3-2.6.34-12
Failsafe -- openSUSE 11.3-2.6.34-12
windows 1
windows 2
which is fine, but clicking on windows 1 takes me to the windows boot loader with the options of windows 7, or previous version of windows. clicking on windows 2 brings up a screen telling me " rootnoverify (hd0,1) chainloader +1 BOOTMGR is missing press ctrl+alt+del to restart" I would like the end result to be windows 1=XP,windows 2=7, then I can rename them accordingly. one more thing, when I installed openSUSE, I let it automatically configure the hard drive and create the necessary partitions(it deleted partition 3 first). i remember it saying somewhere that the boot manager was past the 125 GB limit, and might not boot.
I have a "master" IDE HD upon which reside several Linux OSs and a couple of Windoze OSs. The boot system is Mandriva using Grub Legacy and the latter's menu.lst file is where I select which OS I wish to use. I use HD physical carriers for my HDs. I used GPartEd to copy over newly installed OSs on another drive to the "master" HD. The commands in the menu.lst file for Linux OSs are representative as follows:
Name of OS
root (hdx,x)
configfile /boot/grub/menu.lst
Task: Enter Grub2 which, I seem to understand, is a work in progress. I presume that some commands in Grub2 are not recognizable by Grub Legacy. I installed Debian 6 on another drive and I wish to incorporate an entry in the menu.lst file described above using the technique described above. Is it possible to use the menu.lst file in Grub Legacy (0.97) in order to boot the Grub2 Debian OS? Or am I chasing windmills?
only kde sound but not in firefox etc. What shall i do?pulseaudio seems disabledworked before an update that killed my last installation ( gstreamer? )but there i did some changes which i dont remember anymore.anyway im on a fresh system without xfze and gnome as previously. altough i installed nautilus etc.
View 2 Replies View RelatedI´ve got the problem that i get no sound with adobe Flash 10.0.32.18 in Firefox 3.5.4 on my Suse 11.2 What i´ve done: After Suse 11.2 installation i installed Audiocodecs by using 1 click installation from:
Restricted Formats/11.2 - openSUSE-Community
Switched default Sound to USB Device in Sound Options in Task bar. After this i uninstalled the Adobe Flash plugin and reinstalled the Flash Plugin (after uninstall of Plugin, it still appears in Firefox as "10.0r32") by using the install Option direct from the adobe homepage as Yast Installation.I get sound with Koffein, can play mp3, everything fine, but Flash Clips are without sound. For sound i use usb speakers plugged in direct to the USB port of my Asrock motherboard. Suse also find the on board Nvidia Soundchip, but i only use the usb speakers. For further test i installed VLC Player. Here i also got no Sound, but Video is still playing.
I am unable to get audio from flash videos on sites like ...... When I run firefox from the command line I get the following output.
> firefox
*** nss-shared-helper: Shared database disabled (set NSS_USE_SHARED_DB to enable).
ALSA lib conf.c:3009snd_config_update_r) Cannot access file /etc/alsa-pulse.conf
ALSA lib pcm.c:2205snd_pcm_open_noupdate) Unknown PCM default
ALSA lib conf.c:3009snd_config_update_r) Cannot access file /etc/alsa-pulse.conf
ALSA lib pcm.c:2205snd_pcm_open_noupdate) Unknown PCM plughw:0,0
I have tried reinstall of alsa, libasound. I was having 32-bit flash player; but there was no sound. Now I am using 64-bit flash player from adobe website, yet no sound still. I do not have pulseaudio. The file alsa-pulse.conf does not exist. Somehow, my system thinks there is pulse while I have it uninstalled.
I am trying to open some wmv files through firefox (opening in my gmail). When trying to open, the only selection I have is Banshee. When I download onto desktop, I can open it using mplayer.
View 9 Replies View RelatedOn opensuse11.2 id do not have any plugin to handle streaming like quicktime, windows media etc.
If I take the url directly into vlc:
It streams fine.
I've tried adding variation this to mimetypes.rdf:
Code:
But it always start downloading.
I can alter the NC:alwaysAsk parameter so I see it is being used.
All I want is a one click streamer, maybe I must use the mplayer plugin?. I just find it strange I cant just pipe the data direcly to vlc.
some of my apps will give sounds but not all. when viewing videos on videos, i can get video but no sound. the same is for the vlc player. my particulars are:
new dell computer. dual boot with windows 7 and the sound there is ok.
cpu is intel c7 with 8 g-byte of ram.
os is open suse version 11.2 - 64 bit
desktop is kde
sound is 5 series/3400 seriies chippset high def audio
i just recently installed open suse so no new software other than what was there on install is added. by the way, i get the kde sounds and can play audio cd's so the sound is working partially. just not for these apps. i have adobe flash installed. i'm new to kde. i have previously used gnome on other computers.
I have developed an audio problem; although continue to get sound with kaffeine and aamrok, firefox recently quit playing sound; no software updates were performed, it just quit. It has always been buggy, like audio would cut out if another program tried to play a sound and firefox and/or aamrok would have to be restarted. this is different though, it's nothing to do with a conflict it just doesn't work. It won't play sound from flash videos from the internet or locally but I can see the vids, and it won't play mp3's (these both will play fine with aamrok or kaffeine). It worked fine until all of a sudden, Also, konqueror is exhibiting the same behavior as firefox, and it too used to play sound just fine.
I have already used yast to update anything to do with "codec" "xine" "flash" and "firefox"
Somewhere along the line, sound disappeared from my browser. It was working. I have been following this thread and it has not yielded a positive result. I also installed mmcheck from red dwarf and it worked fine. The only exception was that phonon-vlc and libx264-104 from videolan are installed.
I also found in the firefox about:config with filter to flash:
plugin.disable_full_page_plugin_for_types; application/x-shockwave-flash
I am from Costa Rica, but now I am living in France, and I really want to watch TV from CR in this site
Grupo ICE en Vivo!
but the problem is I need a plugin for Windows Media Player. I found that
Using the Windows Media Player plugin with Firefox
I install gnome-mplayer and gecko-mediaplayer, and then it's impossible open firefox, because it starts and holds a few seconds and closes again.
Just got done installing openSUSE 11.3 with the fantastic support the forum brings, but now I notice there is no sound coming from Firefox (v3.6.8) with Flash v10.1. Nor do I receive the new message sound for the Facebook chat. I do have sound at start up (the start up chimes) and I do have working sound in Amarok (with glorious mp3 support, YaST2). Is there a plug in that is needed, or is there an incorrect setting?
View 2 Replies View RelatedIntermittently after using Firefox for watching You Tube etc, you find that there is no sound from Amarok and probably all other sound applications. Sometimes while using Firefox for multimedia playback ie You Tube the sound gets stuck ie (repeats the same few millseconds of sound ad infinitem) like a stuck record (for those that remember them). One solution is to reboot the system, however a quicker method is to stop & restart the alsa sound system.
> su
> [Enter root password]
# /etc/init.d/alsasound stop
# /etc/init.d/alsasound start
# exit
> kmix
[Code]...
I cannot hear anything from flash player or firefox
ANT1 WEB TV /
no sound
Definition of pending adjective from Cambridge Dictionary Online: Free English Dictionary and Thesaurus I cannot hear the pronunciation of the world. Τhe sound chip (Realtek ALC88B) is embedded in the motherboard. I think the problem started after an update.
YaST2-> Sound Configuration
SBx00 Azalia(Intel HDA)
* Configured as sound card number 0
* Driver snd-hda-intel
Radeon X1200 Series Audio Controller
* Configured as sound card number 1
* Driver snd-hda-intel
on the down right corner
Other-> PulseAudio_Configuration
an error message apears PulseAudio is not installed or cannot be configured.
If I try to install the package alsa-plugins-pulse
Warning:
!alsa-plugins-pulse-1.0.23-1.9i586 requires pulseaudio, but this requirement cannot be provided.
I'm trying to play quicktime (streaming) movies in firefox and therefore followed this guide: MPlayer Mozilla/Firefox plugin But it didn't succeed as i don't find the mplayer plugin in my add-ons of firefox. I placed the mplayerplug-in.so file into /home/.mozilla/plugins and /usr/lib/mozilla/plugins folder but without success.
View 7 Replies View RelatedI use openSUSE 11.4 64 bits, KDE, FireFox 5.0 for browser.Graphics card : nVidia GeForce 9500 GT.
However, when I want to see embedded movies, e.g. in my newspaper, or looking for a hotel, either I get the message : you have no flash plug-in installed, or I get a black screen with a cross in it.
Before that I tried to :
Code:
sudo zypper rm pullin-flash-player flash-player nspluginwrapper
followed by :
Code:
sudo cp ~/Downloads/libflashplayer.so /usr/lib64/browser-plugins/
I also followed the links indicated by FireFox for the missing plug-in which eventually resulted in :
[Code].....
Since yesterday, I cant use firefox anymore. When I launch it, It appears half a second and close. I tried to remove it in yast, then install again. No result.
View 3 Replies View Relatedflash version 10.0 r45 in firefox plays video, graphics, and sound just fine. however, while i'm playing a video on videos, or listening to pandora, the sound could unexpectedly crash. when this happens, sound doesn't just stop playing. it keeps playing but loops the sound every second or so - it's kind of strange to describe; the sentence, "hello, how are you?" could sound like "he-he-he-he ar-ar you-you-you". has anyone experienced this? i say it happens 'unexpectedly' because i can't replicate the crash on demand, but it happens in every firefox session. it seems that it does not matter what i'm doing - i've tried crashing it by making a flash video full screen and exiting continuously etc. because sometimes it happens when i'm going to full screen or changing tabs.
however, most of the time it happens when i'm not even touching the computer - i'm not sure if some background process can cause flash's buffer to overflow, or whatever. other times, it doesn't even need me to play anything for it to crash the sound in flash - it could loop sound from the first time i tried playing it in flash in that ff session. even when i exit firefox or pause the sound it takes a few second for the loops to stop. however, when i restart firefox the sound is fine until it crashes again and i have to restart, again! i tried removing libflashsupport as i read in other threads that it causes sound issues - no luck there. i uninstalled, installed and all that jazz. tried strace - doesn't report any flash errors for some reason, or as far as i can understand.
i also installed the flash debugger for use with the firebug extension, flashbug addon in firefox, but i'm not getting anything there either - i think it can't locate the flash debugger, although it lists the right version. i haven't had this problem with chromium yet, but i mostly use it when flash sound in firefox crashed and i don't want to reload ff; i think they use the same 'libflashplayer.so'? also, just to clarify, sound from the mplayer plugin works fine, and when the sound crashes in flash it does not cause ff to crash and quit. firefox continues to run normally but when i play sound in flash it starts looping. i've had sound problems in the past and i'm thinking there is something i messed up in the packages i have installed. i uninstalled pulseaudio because it was the only way i could find to get my skype working. how would i know if there are conflicting elements?
here's what i get from 'lsof | grep snd':
code:
firefox 956 angelos mem chr 116,4 3850 /dev/snd/pcmc0d0p
firefox 956 angelos 120r chr 116,2 0t0 3751 /dev/snd/timer
firefox 956 angelos 122u chr 116,4 0t0 3850 /dev/snd/pcmc0d0p
firefox 956 angelos 123u chr 116,8 0t0 3874 /dev/snd/controlc0
keytouchd 4518 angelos 4u chr 116,8 0t0 3874 /dev/snd/controlc0
knotify4 4683 angelos 12u chr 116,8 0t0 3874 /dev/snd/controlc0
kmix 4690 angelos 10u chr 116,8 0t0 3874 /dev/snd/controlc0
keytouchd 8563 angelos 4u chr 116,8 0t0 3874 /dev/snd/controlc0
it seems to me like there should be a conflict between all those using the same sound control? however, why would it just happen unexpectedly? also, is there a way that i could dissociate sound from firefox without having to reload a whole session with many tabs?
Why is it that Adobe Flash frequently crashes on Firefox 4. I'm using opensuse 11.4 64bit ed. Is gnash better for ...... This is getting really annoying.
View 1 Replies View RelatedSometimes in BBC iPlayer - Bigscreen the fullscreen video does not open on top, and then none of the lirc remote control commands (irxevent) function, not even Escape (nor Alt-TAB, which would bring the fullscreen on top if I used the keyboard - but sitting in the TV couch I would prefer using the remote only).
This often happens on my SuSE 10.2 partition, especially when wanting to resume a video, but never happens on my Kubuntu 9.10 partition. Both are 32-bit using KDE 4.3.5 Firefox 3.5.8 and Adobe Flash 10,0,45,2.
How can I get the fullscreen on top??
I was unable to play windows media player content from WEB using Firefox. Firefox is asking to install missing plug-ins. But when I click on "install missing plug-in" button, its showing "No plug-ins found". In windows its played by windows Media player plug-in.
View 3 Replies View Relatedhow to edit the new grub.cfg file. For some reason when I start any version of linux none of my usb ports are powered unless I use these boot parameters (noapic nolapic). I have no idea why and I don't really care why, all I want to do is edit grub.cfg so it will incorporate these parameters automatically at startup.
P.S. Why change from the old menu.list?
I recently installed the x64 rpm of OSS on my Opensuse 11.2 installation (alsa does not have drivers for my lynx card). Sound works beautifully in KDE (login sounds, apps produce sound, etc), EXCEPT for firefox. I can get no sound at all from firefox. I am baffled at why only firefox does not play audio.
System:
OpenSuse 11.2 (it is a pretty fresh install)
OpenSoundSystem 4.2
KDE 4.4 (updated from factory repos)
I'm using Firefox 4.0 b7, and tried to install Mozilla binary on Debian 64 bit. Since it was built for 32 bit (x86), I needed to install also ia32-libs-gtk package. This at least enabled Firefox to start, but still it has UI problems, because it accesses current theme binary from /usr/lib/gtk-2.0/2.10.0/engines/ which are obviously compiled for 64 bits. This causes some UI to be degraded to generic GTK. Is there a normal way to solve this?
I my case I got a whole bunch of errors like this (using Nimbus theme, in case of Clearlooks errors are of the similar nature) Plus there are some plugins errors too, which are a second issue: Gtk-Message: Failed to load module "canberra-gtk-module": /usr/lib/gtk-2.0/modules/libcanberra-gtk-module.so: wrong ELF class: ELFCLASS64
(firefox-bin:10197): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libnimbus.so: wrong ELF class: ELFCLASS64
(firefox-bin:10197): Gtk-WARNING **: /usr/lib/gtk-2.0/2.10.0/engines/libnimbus.so: wrong ELF class: ELFCLASS64
/usr/lib/gio/modules/libgvfsdbus.so: wrong ELF class: ELFCLASS64
Failed to load module: /usr/lib/gio/modules/libgvfsdbus.so
[Code]....
How do you get firefox to play wmv files? Everytime I load the video, it shows the controls and everything but it doesn't load the video itself. When I hit play, nothing happens.
I'm using FF 3.5.9, Ubuntu Karmic
Another post regarding the Firefox/Flash issue on Ubuntu 10.04 ... My main question is that I don't understand why Flash in Firefox (Huffington Post videos of The Daily Show) works differently on two computers that are identically configured (but cf. below):
- both have Firefox 3.6.3;
- within Firefox aboutlugins, all plugins with "flash" are the same;
- within Synaptic, all things that have "mozilla", "flash", "adobe" are identically installed on both (that includes Adobe Flash plugin Version 10.1.53.64ubuntu0.10.04.1)
The only difference is that the computer where it works is a 64bit system, the one where it doesn't work is a 32bit system. Can this be true, that this is the thing that makes this huge difference? Any fixes around for that (other than FlashAID)?
I have an X-Fi soundcard. I cannot get any audio from playing mp3s in apps like VLC and Movie Player. But flash works fine. Firefox sounds are fine.
View 5 Replies View Related