I am running openSUSE 11.2. I decided to give it a try on KDE 4.4 and, after the upgrade, I've noticed an inconvenience regarding Amarok. It is no longer able to play from the web. I've captured a log (amarok --debug) from the event, but I don't know where to post the file.
View 9 RepliesAmarok's video applet isn't working for me, it tries to play a selected video but only shows a blank background in the applet. This function worked in earlier versions of Amarok / KDE. I've tried Gstreamer, VLC and Xine phonon backends with same result. I don't think it is codec related as video/flash playback is fine in other apps.Currently using Suse 11.3 x86_64 / KDE 4.5.5 / Amarok 2.4.0 with xine backend
View 5 Replies View RelatedSummary: a long-working config involving a 1st-generation Ipod Touch with v1 firmware, Ubuntu, and Amarok 1.4 stopped working when I upgraded to Lucid.
A few years ago I was given a 1st-generation Ipod Touch, running the original v1 firmware (I never upgraded to the v2 firmware because v2 wasn't jailbroken at the time). I took it to a friend's place to activate and jailbreak it with her Mac laptop (I didn't have a Mac or Windows machine to install Itunes on; have been Linux-only for many years). Once jailbroken, I was happily able to use it with Hardy, Amarok 1.4, and ipod-convenience (which supply ipod-touch-mount/ipod-touch-umount).
This continued through upgrades to Intrepid and Jaunty. I didn't care for Amarok 2 in Jaunty, so I installed Amarok 1.4 from the ppa someone else made available. I continued to use it through Jaunty and Karmic, without any problems.
Last week I upgraded to Lucid. Syncing Amarok 1.4 to the Ipod Touch no longer appears to work; the Ipod fails to recognize any music transferred onto it (standard "No Music - you can buy music at Itunes" error screen), so I presume this is a libgpod/hash error. I have the FirewireGuid properly set in the .../Device/SysInfo file, as I always have.
Every time I use the Amarok Ipod "connect" function (which runs ipod-touch-mount) it tells me no valid Itunes db was found, and asks to initialize the db. I can then transfer music to the Ipod, and successfully disconnect, but it's not recognized on the Ipod after a respring or reboot.
I've tried RhythmBox and gtkpod briefly with no luck either.
Relevant installed packages:
Code:
ii amarok14 2:1.4.10-0ubuntu3~ppa5 Amarok 1.4 series
ii amarok14-common 2:1.4.10-0ubuntu3~ppa5 architecture independent files for Amarok
[Code]....
Edit: a little more info: after I let Amarok initialize the Ipod Touch and transfer a song to it, the iTunes.db that gets created on the Ipod is 0 bytes long. I presume this is the source of the problem, and indicates something is going wrong with libgpod's creation/editing of the db.
what I should do from here? I've tried removing the DB by hand, but it makes no difference - the subsequent operation to initialize the db results in the same 0-byte file.
For the last few releases, I've remained with Amarok 1.4, but now that I've deemed Amarok 2 stable enough, I've upgrade, however, the lyrics to my songs (which I put in a lot of effort in downloading), are not reflecting. Is there anyway to export lyrics from Amarok 1.4 and import them in Amarok 2?
View 1 Replies View RelatedI looked at amarok 2.3 and i want to upgrade it from 1.4, but i looked at the amarok site and it said the amarok in Debian Lenny will always be 1.4? Is this true and if not, is there a way i can update it manually?
View 3 Replies View RelatedI just upgraded from 8.10 to 9.10 and now my sound doesn't work (note: I don't know if sound was working on 9.4, since I only ran that long enough to upgrade again) Sound was working just fine under 8.10, and I just tried booting up with a livecd I had handy, which is 8.04.1 and sound worked right off the bat, no problems.I've checked the volumes on everything, including the master volume which WAS initially set to 0.Sadly, turning that up did nothing.The Pulseaudio Volume Control app seems to think nothing's wrong- it's picking up the sound from various applications just fine, the volumes are all on, etc. (aplay lists my soundcard fine:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: VT1708B Analog [VT1708B Analog]
Subdevices: 2/2
[code]....
The problem i'm having is that my microphone stopped working after the upgrade to 10.10. Ubuntu doesn't seen any sort of input device any more, no line-in , no mic ( front as back ).Own on to the specs of my machine:It has a realtek ALC861-VD audio chip.2 mic jacks, 1 line-in , 2 out (front and back) and a coaxial port thing .The os is a upgraded from 10.04 to 10.10 and everything except this and my tv card sound works.I have pulse audio tools and alsa mixer ( although it broke during upgrade ) installed.alsa info is available upon request, so is any other info may you need it.
View 7 Replies View RelatedI just upgraded to karmic the other week and now my webcam isn't working anymore. here is my dmesg output
[Code]....
the last two lines are added whenever I try to run mplayer or skype on the webcam. We are currently using uname -r: 2.6.31-19-generic (64 bit), but the problem was the same on 2.6.31-17-generic
I'm using 11.2 KDE4.3.1 x86-64 final,my Amarok Version 2.1.1 (Using KDE 4.3.1 (KDE 4.3.1) "release 6") not playing any mp3 song.
View 9 Replies View Relatedwhere to find amarok 2.2.2 beta 1 ?
i found one svn version in an unstable trunk, it this the right one ?
see here : IMPORTANT: Amarok 2.2.1 -
how to get Amarok 1.X installed on 11.2? I updated to 11.2; and as far as I can tell it's only got A2. I am REALLY DISPLEASED with A2 and want to go back to 1.4. I couldn't 1.4 any where for downloads; as far as repos go.
View 9 Replies View RelatedI am not having any luck with the 'out-of-the-box' version of Amarok on 11.2. It is missing a lot of features (syncing with my fuze most notably). So I figured that I would go to the latest version, but the one-click install from backports (2.2.2-4.1) reported that it could not install amarok-xine and amarok-libvisual. It installed anyway, but was not stable at all. I thought that that install process was supposed to do the updates for me. I went back to the 2.1.1 version, but it still crashes pretty frequently.
Trying banshee right now. Anyway, the big question is... do I go up, down, or off for Amarok? I have a Sansa Fuze and would love to sync music with it, but Amarok is not getting the job done right now. I have read of people going back to 1.4, but after my attempt to install 2.2.2, I'm not so sure that I'm doing it right. Should what I did have worked? I'd like to find one that will get album art and transfer it to my fuze as well (folder.jpg is what seems to make it the happiest).
I'm using Amarok 1.4 and when I select the playlist=>burn to CD, k3b doesn't apear. I get the prompt that asks if I want to make an audio or data disk. Only the Audio CD works; the data disk option doesn't work.
View 9 Replies View RelatedI'm running OS 11.2x86_32, KDE 4.4.3 with the latest updates and a problem has cropped up with Amarok (version 2.3.0). When starting the app it keeps saying there is no mp3 support and do I want to install it. Tell it yes, and restart the program and it says the same thing at each start. What's strange is that mp3's play just fine. I've run the 10 steps for troubleshooting and all the codecs are fine, this appears to be an Amarok only problem. SMplayer works fine, Kaffeine and VLC too.
View 4 Replies View RelatedI have a vast amount of MP3's but I can't seem to get Amarok to play them, Amarok opens up and I can see all my music in the music folder with no problem but when I select an MP3 and select Play I get nothing. I can convert my CD collection to OGG.VORBIS but I don't want to go through that process all over again. Currently I'm using 11.2 64bit,
View 9 Replies View RelatedI'm getting no sound from amarok. I been trying different things like mp3's and internet radio, updating packages, even choosing gstreamer (xine by default) but no go.
View 9 Replies View Relatedsuddenly I just could not get it to run. The coloured startup came up but nothing else. So I ran it as su from a terminal and this was the result:<unknown program name>(6552)/:KUniqueApplication: Cannot find the D-Bus session server: "Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken." <unknown program name>(6551)/: KUniqueApplication: Pipe closed unexpectedly
View 9 Replies View RelatedI added the Packman repository and installed ASF modules for Amarok. Since that point Amarok didn't make a noise, although it actually played music.
- Speakers aren't muted
- sound works fine using banshee and pretty much everything else
- so drivers are up to date
I'm having trouble playing some mp3's through Amarok, all other media players are fine with the mp3's in question. Tested on VLC and Audacious. Most other mp3's play through Amarok though. Why this problem. I'm using the gstreamer backend. I tried changing it to xine but then nothing would play. I really like Amarok and want to use it as my main player, so this issue is a little irritating.
View 7 Replies View RelatedI run Amarok 2.4.3 from KDR 4.7. I noticed that Last.fm is not listed among the services.Nor is the usual "Like" icon displayed in the middle pane. And Amarok doesn't scrobble. I have liblastfm0 installed and I installed liblastfm (no "0") from KDR yesterday, but that didn't help. So these should all be from the same repo (can't check right now as package kit is doing updates). Any clue what I have to do to get the service back? I use openSUSE 11.4 and KDE 4.7 from the Release repo.
View 5 Replies View RelatedA Happy and Prosperous New Year openSUSE!!!!
When a tv stream is opened with smplayer it goes nowhere.
A snippet from the smplayer log:
[10:20:47:604] Playlist:layItem: out of range
[10:20:47:604] BaseGui:laylistHasFinished
[10:20:50:387] Core::changeOSD: 1
[10:20:50:388] Core:ausing_prefix
[Code]...
I am trying to stream my Desktop through VLC. Video isn' t a problem but audio is.The problem is with the upgrade from 11.3 to 11.4 I got pulseaudio again.I can't find a way to stream all local audio channels with VLC and pulseaudio.I tried "padsp vlc" and used oss:///dev/dsp which kinda works but the audio is very very low as in useless.I also tried setting up rtp/multicast pulseaudio but I couldn't get it working.
View 5 Replies View RelatedI have used a quite obscure device called Cideko AK0b [URL] .... for quite some time now and it has worked perfectly for almost 2 years now, both in Wheezy and in Jessie. However since I made an dist-upgrade a while back the mouse has totally stopped working. The system works through wifi - strangely enough - but everything else works. Keyboard and gamepad buttons. The manufacture says the things doesn't work on linux and so far I have proved them wrong.
But now the mouse is just out right dead no matter what I do. Have looked into mouse autosuspend but no avail so far. My suspicion is systemd but that is as good as any guess.
Running 3.14-2-amd64.
This is my dmesg.
Code:
Select allroot@cryptserv:/home/dencrypt# dmesg | grep Cideko
[ 3.158099] usb 6-3: Manufacturer: Cideko Inc.
[ 3.469194] input: Cideko Inc. AK08b Device as /devices/pci0000:00/0000:00:12.1/usb6/6-3/6-3:1.0/0003:20E8:5860.0001/input/input2
[ 3.469329] hid-generic 0003:20E8:5860.0001: input,hidraw0: USB HID v1.10 Keyboard [Cideko Inc. AK08b Device] on usb-0000:00:12.1-3/input0
[Code] ....
I'm trying to play some music with amarok. I select one track from the playlist, and then I click on PLAY and not only the track is not played, but it starts to read others mp3 folders.
View 3 Replies View RelatedAfter upgrading my Lenovo T61 to openSUSE 11.2 (64 bit)/KDE 4.3.1.playing mp3/Internet radio (Last.fm) or DVDs using VLC works fine.When trying to play mp3s/Last.fm with Amarok 2.1.1 or when trying to play DVDs using LinDVD there is no sound at all although each player appears to be processing each of the media correctly. When testing sound output with the Amarok settings (backend Xine) I get test sound output with these device types
- HDA Intel (AD198xAnalog)
- Pulse Audio
But none with
- HDA Intel (AD198xDigital)
- HDA Intel, AD198x Digital(IEC (S/PDIF) Digital Video Output).
Could it be that some other sound server, such as ALSA etc is blocking/competing with the audio hardware? How do I get Amarok/LinDVD to output sound?
i use kde 4.4when i try to start amarok (2.2.90) i get:
amarok: symbol lookup error: /usr/lib64/libamaroklib.so.1: undefined symbol: _ZN6Plasma7WebView10itemChangeEN13QGraphicsItem18GraphicsItemChangeERK8QVariant
Isn't the scrobbler (or whatever it is called) built into the newer Amarok as it used to? I recently upgraded to 2.3.1 and I can not find any possibility to connect with Last.fm. Do one have to install it separately instead?I am on OS 11.2 and upgraded through KDE application update repo.
View 2 Replies View RelatedAmarok won't edit tags in MP3-files. All the options are greyed out. I'm using OpenSuse 11.3 64-bit with KDE 4.4.4, and Amarok v. 2.3.0.
View 2 Replies View RelatedI listen to some voice mail messages over the web. Firefox downloads the message as a ".wav" file, and then invokes amarok to play it.What I have been noticing, is that amarok seems to cut the message short.As an additional test, today after playing a message on amarok, I tried playing the same message with kaffeine. There was significantly more to the message when played on kaffeine. The particular message ended with the phone number I should call back (if I wanted to). None of that ending sentence showed in the amarok playback
View 9 Replies View RelatedSuse 11.3 KDE 4.4 Amarok - Standard version that comes with 11.3 I start Amarok, which still worked fine yesterday and this morning. I get the Amarok splash screen and then it disappears and the Crash Handler with the following message appears.
[code]...