I have read that some linux distributions will all be join into a single distribution called canterbury. How could we upgrade the linux suse when the this new version comes? with the zypper dup maybe?
View 3 RepliesIs there a link to download a version of Suse with either kernel 2.6.26 or 2.6.28? For some reasons I have, I need one of these kernel versions. The newest download here, 2.6.37, won't work for me.
View 9 Replies View Relatedis it possible to upgrade simply upgrade from 11.3 to 11.4 or do i have to do a clean install? what are the procedures on linux??
View 9 Replies View RelatedI'm so tired on how i can change the resolution of my suse 7.3 because i change my monitor into a wide flat screen.
but now i decided to upgrade my OS in to the latest version of suse but i don't have any idea on how to start because i have alot of files and important application in 7.3 i worried if i upgrade my OS it will erase my files and application. does anyone know to do it. i want to upgrade but i dont want to loose my files and application.
I installed Suse 11.3 and it freezes randomly. No mouse control, keyboard. Sometimes the screen renders just the part of it, mostly top part of the screen and then freezes. I've gone through the /var/log/messages and I found this last line prior to restart (not sure if this is relevant) linux-fcvk kernel: [185.318403] [drm] nouveau 0000:01:00.0: PFIFO_DMA_PUSHER - Ch 1
View 5 Replies View RelatedI'm looking to upgrade squid 3.0.x to the latest version 3.1.x. Is there a way of doing it without losing the current configuration ? The installed version was done using the binary package (rpm) and not compiled from a tar package.
View 8 Replies View RelatedI'd like to upgrade the latest version of Mozilla Firefox?
View 3 Replies View RelatedI did apply the updates on 11.1 32bit and upgraded the kernel from 2.6.27.45 to 2.6.27.56.
Now:
Code:
> uname -a
Linux myhost 2.6.27.45-0.1-default #1 SMP 2010-12-01 16:57:58 +0100 i686 i686 i386 GNU/Linux
but:
Code:
> cat /proc/version
Linux version 2.6.27.56-0.1-pae (geeko@buildhost) (gcc version 4.3.2 [gcc-4_3-branch revision 141291] (SUSE Linux) ) #1 SMP 2010-12-01 16:57:58 +0100
I am trying to connect to the webserver using ftp command and i get the following response. Could not start process Unable to create io-slave: klauncher said: Unknown protocol ''. I also installed filezilla and used it, however it is getting timedout often in about 1 minute. How do i increase the time out or correct the ftp program.
View 3 Replies View RelatedI am using open suse 11.0 with gcc 4.3.2. I am compiling a program which requires libg2c. Where can I find libg2c and how to install it?
View 8 Replies View RelatedOpenSuse 11.2 This link shows that gdb-7.2-61.1.x86_64.rpm is the latest version of GDB, but when I do: zypper install gdb, the version 6.8.x gets installed! The following result is after forceful refreshment:
Code:
linux-uitj:/home/anisha # zypper repos
# | Alias | Name | Enabled | Refresh
--+-----------------+-----------------------+---------+--------
1 | KDE:KDE3 | KDE:KDE3 | Yes | Yes
2 | X11:lxde | X11:lxde | Yes | Yes
[code].....
Last winter we had the intention of using VMWare branded Novell Suse Enterprise as we were going to be getting the licenses/subscription through the purchase of Vsphere. Since that time we have set up 4 VMs, and have been testing an application that will soon be going into production status. However a new issue has arisen. As we are over budget we will not get the Vsphere license (which included Suse subscription). We also found that the added features of a Vsphere license do not really add anything over the free ESX hypervisor.
On the one hand these servers have all been configured precisely, on the other hand we have no update service from which I understand we would need a Novell subscription. Most of the repositories we have added are external to Novell, meaning they are community ones. So my questions are this:
1.) Can we use Opensuse community repositories for the Online Update?
2.) If not is there a way to easily 'convert' Enterprise Suse to Opensuse?
Obviously what we first want to avoid is having to do a brand new install of Opensuse and spend the time moving data from the old to the new. One of the issues that has caused the delay and over runs is that the application we will be deploying has not lived up to its promises, and has caused considerable amount of time configuring, tweaking, and de-bugging.
How do I replace a 32bit version of 11.1 with a 64bit version of 11.2 or is it even possible?
View 2 Replies View RelatedFor the past several years I have grown fond of ver. 11.0...I have installed many programs with that verison. I have checked out the Live ver. of 11.3, and I like it allot but I'm wondering if I can some how check the software available for 11.3 to see if the same program/s are available with ver. 11.3. In other words can I run the Live CD, click on the Yast package installer and look for the same programs I have with ver. 11.0 ?
View 1 Replies View RelatedIs it possible to upgrade from stock version 2.3 to current 2.32 using YAST? I can see 2.32 when using a browser to look at the repository, but when I enter the repository as a software source in YAST, it does not show up in YAST. What steps am I missing? Can I use YAST, or should I just download the RPMs and go from there by hand?
View 7 Replies View RelatedI wanna use firefox for working with codes add-on, but when I run "yum install firefox", there is just Firefox version 3.5.0 beta 4 while the newset version at this time is 3.5.5, so I try to install the newest version of firefox browser.
View 9 Replies View RelatedHow do I Upgrade to or Install the latest version 1.1.9 of VLC Player in LUCID?
View 2 Replies View RelatedIIm running several Webservers on CentOS 5.2. Due to the Hosting-Platform I use, it is recommended that there will not be CentOS 5.3-Updates installed. So I searched the net a lot now but didn't find a propper solution. Is there a way to tell yum only install patches and updates for version 5.2 and not to upgrade to 5.3?
View 3 Replies View RelatedI was wondering if there is any way to enable an MS Windows client that is otherwise unable of joining a domain to join a domain controlled by (open)SUSE? Is that inability only for joining a Windows based domain but a client that runs XP Home Edition or similar domain- incapable version of Windows could join a domain if it was controlled by Linux?Pardon my newbie style, but answer doesn't have to be detailed step-by-step, just yes/no answer with some pointers would do. I am not new to linux but new to network services... search engines weren't friendly when asked this question at the search bar...
View 2 Replies View RelatedHow do i check for updates to the current version of rkhunter and if possible upgrade to a new version?
View 2 Replies View RelatedI have installed Ubuntu 10.10 desktop version on my Lenovo L420 laptop. Now my friend told me that if I had installed laptop version on it then it would have recognized events related to laptop like closing down the laptop screen and all.
Q1. Is there any way by which I can upgrade it to laptop version?
Q2. What are the differences between both?
I tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
I have a server running Reh Hat Linux 7.3 with kernel 2.4.18. Can i upgrade kernel to version 2.6 and glibc to version 2.5?
View 6 Replies View RelatedNever had success in past on upgrading .. followed instr. for d/l suse 11.3 (have 11.2 now), also tried upgrade firefox 3.6.6 tar.bz2 which is apparently "ark" . tried following instructions but failed in both instances
View 1 Replies View RelatedI am trying to Install Open Suse 11.3 (burned as an ISO DVD) along with existing Win 2008 R2 OS. When I try to boot from the DVD it just logs in to Win2008 though boot from CD/DVD is enabled in the boot sequence. So i tried to mount the ISO and run from Windows ! BUT I get an error before installation starts telling that Win2008 R2 is not supported in open suse installer! Is there anything I can do to overcome this and install/retain both OS? In fact I am even trying to c hange my win2008 from R2 to Enterprise to see if I can overcome the problem!
View 9 Replies View RelatedI am using Nagios 3.2.4 monitoring tool on a Linux box with Fedora 10 installed on it and Apache version is 2.2.10. I would like to upgrade my Fedora version from 10 to latest version Fedora 13.
View 9 Replies View RelatedI have a box already has openSuse 11 32bits installed. I want to replace it with openSuse 11 64 bits. When I insert the openSuse 11 64 bits CD, I got error message "this is a 32 bit computer. Can not use 64 bit software". so How do I wipe out the old OS (32 bits), and install new OS (64 bits)?
View 7 Replies View Relatedi have a backtrack install that i would like to keep while installing suse for an everyday OS; i start the install process but when it gets to partitioning the hard drive, it doesnt seem to recognize anything already being on there; it just gives me the setup for suse, ie:
sda1 ext3 = OS sda2 or sda5 = swap. do i have to configure a partition scheme? i installed ubuntu on a desktop alongside windows very easily due to grub graphical install/partition; is there not a similar function for suse?
I have installed Suse on my Windows Vista 64bit machine a couple of times, but the last time I did it - after a disk change - presented some unanticipated problems. Prior to install, Windows Disk Management (whose output I was unable to paste into this question) showed that my disks were laid out as follows:
[Code].....
Disk 0 is a Seagate ATA drive, while Disk 1 is a Western Digital Ext HDD Usb Device. Looking back, I think I should have carved out a partition after M before installing Suse, but I was uncertain whether to make it a logical one or a primary, and in the past the installation has taken the 25 or so gig it needed from the last defined partition on disk 0. This time, however, it went after disk 1, and reformatted the entire drive, deleting about 300 gig of user data, including my system backup. What really suprised me is that it took up the entire drive: 2 gig for the swapfile, then a 20 gig partition, and all the rest for the third partition.
This is not what I would have expected. I especially would not have expected the installation to re-format user data. In any case, I did not want Suse on disk 1, so I reformatted the drive and then used my Partition Manager to rebuild the boot Mbr. So now, I am able to boot into windows, do not have Suse on my machine, but have lost critical data. My disks are now back to the way they were when I started (see above), except that drive F is now all free space, except for my latest backup. My question is how do I ensure, when I reinstall Suse, that it will choose disk0 for the installation and will not overlay any of the data that I have on that drive.
Gnome is falling apart and I've had a lot of nagging problems that I couldn't overcome.I'm thinking of wiping the OpenSuse partitions and doing a clean install without wiping the windows partition.I initially setup using the 11.0/XP dual boot FAQ in the How To forum.I have my Home directory backed up on an external HD. Might try KDE next go-round or KDE & Gnome as separate users. I have 11.2 i586 installation DVD.
View 2 Replies View Related