OpenSUSE Install :: Shutdown / Restart Screen Distortion With Logout Desktop Effect
Mar 28, 2011
When trying to "Leave" the system (either via the small button on the lower right of the taskbar or by right clicking on the Desktop and selecting "Leave") the logout / shutdown / restart screen comes up. I have the "Logout" desktop effect activated, which is supposed to desaturated the background when the Leave screen appears. However, instead of simply greying out the background, the image on the desktop and the rest of the screen also gets slightly distorted, with seemingly random distortion effects cropping up all over the place (e.g. horizontal lines or large blurs).
These distortions are different every time the Leave screen comes up. The Leave screen itself is displayed fine, and apart from the dodgy background I have no other issues with the whole process (the system shuts down or restarts properly according to my choice). I am using the Radeon drivers, and all other desktop effects I have on (Magic lamb, cover switch, present windows, etc) work fine and without a hitch. It's only the Logout effect that seems to glitch. Are the distortions intentionally created by the effect in order to emphasize the focus on the Leave screen?
View 2 Replies
ADVERTISEMENT
Nov 5, 2010
On two of my machines that have Ubuntu 10.10 on them, I cannot shut down, restart or log out by pressing the "power button" on Gnome panel. I can not even do "Alt + Ctl + Backspace" either. However, I can shutdown or restart by: Quote: sudo shutdown -h now sudo shutdown -r now
View 4 Replies
View Related
Sep 29, 2010
My normal day to day user can't shutdown, restart, logout, etc...It just doesn't do anything at all when I try. This wasn't the case three days ago, just fresh installed and seeing the same problem (so it must be some setting saved in my home folder which wasn't wiped).
View 5 Replies
View Related
Oct 21, 2010
Lenovo X200 notebook, 64bit maverick, external monitor connected through DisplayPort, fast SSD drive, encrypted homeI'm almost positive these issues were non existent after installing 10.10RC, but I'm not 100% sure. Maybe I will install it again to check it outAnyway, when I try to suspend/restart/shutdown/logout the system often freezes, showing the console with the similar output:I know this guy is running Ubuntu in VM, but I have very similar ouput, except the last usplash line.But the first line I always have in the output is the infamousQuote:GLIb-WARNING **: getpwid_r(): failed due to unknown user id (0)On a very rare occassion, the system hanged while booting (showing the above glib line as well. But that's quite rare, so I'm not that concerned.
Now, sometimes it does respond to ctrl+alt+delete after freezing, and after I hit this combination, another line appears (from memory):Quote:Init: rc main process killed by TERM signalChecking for running unattended-upgradesBut that's it, I cannot do anything else, only hard reset, which is especially painful when I suspend in the middle of work...There is no interesting information in the logs - a few messages in the kern.log, but nothing I think would show the culpritEDIT: other than that, the machine is very stable and I have no issues with it. It also worked perfectly on lucid 32bit.
View 1 Replies
View Related
Mar 8, 2010
I am running Fedora 12 with KDE on an Acer Aspire One netbook.
A recent update has caused the KDE shutdown/restart/logout buttons (found for example through the Fedora -> Leave menu or by pressing the power off switch)to stop working. I am having to shutdown using shutdown -P now command.
So I have the following questions:
a) Has anyone else had this issue and knows a workaround/fix?
b) Does anyone know what package these belong to so I can try an older version?
c) Does anyone know where this package writes its logs, or if I need to install anything for it to do so so I can have a look?
d) Does anyone know the command-line interface to these commands - that may give me either a more gentle workaround than shutdown -P now, or some insight into why the command is no longer working.
View 3 Replies
View Related
Dec 16, 2008
I have lost my ability in KDE Menus to do a shutdown or restart. My only option is to logoff or cancel. This started occurring about 2 weeks ago, possibly 2 KDE workspace updates ago. I have been assuming it would get fixed with an update but so far it has not.
I am running Fedora 10 x86_64, kernel = 2.6.27.7-134.fc10.x86_64, and the KDE version is:
kde-filesystem.noarch 4-20.fc10 installed
kde-settings.noarch 4.1-4.20081031svn.fc10 installed
kde-settings-kdm.noarch 4.1-4.20081031svn.fc10 installed
code....
I have 3 different systems all running the same OS and KDE versions and it is happening on all 3 systems. All systems have the "Offer Shutdown Options" selected in Session Manager. I have even turned this option off, rebooted, and then back on to try to jumpstart it but that did not work.
Additionally, I have tried deleting the contents of the /tmp directory while in single-user mode and also the .kde under my home directory. This made no difference.
Another symptom I am noticing is that any desktop widgets that I create all get moved to the upper left-hand corner of the display whenever I reboot and log back in. Any extra shortcut widgets that I add to the panel are also gone the next time I log in.
Again, these same symptoms are occurring on 3 different machines.
These symptom do not occur after a fresh install of FC 10. It is breaking during one of the yum updates but I have not narrowed it down yet as to which update is causing this to happen.
View 3 Replies
View Related
Jun 20, 2010
how to record/save logout/shutdown messages for OpenSuse 11.2.
View 9 Replies
View Related
Aug 24, 2010
I have a Lucid installation which I've imaged and pushed to several computers on the network at my office. The system authenticates network users with Active Directory using Kerberos, and mounts NFS shares from a Lucid server downstairs using pam_mount. It all works quite smoothly most of the time, but I get desktop icons in Gnome only on the first login. If I log out, then log in as a different user (local or network, it doesn't matter), the desktop icons are all gone. Everything else looks normal, and I can open a Nautilus window and view any location on the hard drive just as expected. If I use the run dialog or a terminal window to executekillall nautilus the icons are restored. This works whether any instance of a file browser window is open or not.
I have noticed similar, but far less consistent, behavior with gnome-panel. Every once in a while the panels will fail to appear when I log in, but I can restore them withkillall gnome-panel When I run either command, everything works fine until the next login. If I reboot the machine, I get everything back again for one login. Then the desktop icons will disappear, and I have to kill Nautilus and let it restart in order to get them back. I expect I'm missing something important here, but I don't know where to look next.
View 4 Replies
View Related
Oct 16, 2010
i got driver and when i install driver and reboot computer I got just terminal and when I type startx I get error FLGRX and sam log file or something like that.
instruction i found here but some comands didn't worked openSUSE Lizards
View 9 Replies
View Related
Dec 15, 2009
Pressing the shutdown or restart buttons in XFCE simply logs me out and leaves the system running. I did some Googling and it was suggested that by default users don't have permission to shutdown. (not sure how this is a XFCE specific problem in that case but moving on...)
I've taken the following advice:
For a "desktop" system that wants to protect itself from casual attacks (and "puzzled penguins"), but still grant the user control of their system, run the following as "root":
USER=<your_userid>
polkit-auth --show-obtainable | while read OPT; do
polkit-auth --user $USER --grant $OPT
done
Where <your_userid> is the name of your unprivileged account. I wasn't entirely sure how to run it, so I stuck it into a shell script and ran that with the sudo command. Needless to say it hasn't worked. Is there an easy "sure fire" way to fix this problem, hitting the shutdown button repeatedly to test really grates on you after a while. BTW, Pressing the power button on the front of the system shuts it down okay.
View 5 Replies
View Related
Aug 9, 2011
recently I installed opensuse 11.4 in my Dell optiplex 790 desktop. everything works well. however, when I tried to restart or shutdown my computer . the computer logoff and then "freeze" at opensuse window. I have to turn off the power button forcely and turn on the computer again.
My computer configuration:
DELL Optiplex 790
Intel i5 3.1G with HD intel graphic card
Bios revision A05
Memory 8G
View 9 Replies
View Related
Aug 21, 2011
I have opensuse 11.4 (Gnome + KDE) installed. The problem is with Gnome. When in KDE, everything works fine. But in gnome, when I shutdown/restart, it merely logs off the session. Then I have to shutdown it from the menu in the login screen.
View 2 Replies
View Related
Mar 14, 2010
I have a primary language, Italian, and I want also use a secondary language, English. I want to switch language in order to have all the writings and messages in English not to write special characters by keyboard. I switched language in both kde system settings>Regional & language and in yast system>language leaving the keyboard layout Italian, but in the kde menu (the lizard on the left of panel) the groups of applications (multimedia, giochi, sistema) are in Italian and yast too (impostazioni amministratore), instead others are in English.
1)is this a bug or I forgot something?
2)which is the differences switching languages by yast and by kde system settings?
3)Is it possible to switch language and don't restart or logout the system?
View 9 Replies
View Related
Sep 14, 2010
I've installed F13 on a DELL computer. Everything works fine except that under KDE menu if I click on 'shutdown', I have the confirmation windows but the computer never shutdown. Same issue with the the logout button. If I want to stop my commuter I have to open a terminal and type " shutdown now" or "halt".
View 1 Replies
View Related
May 11, 2010
I just recently installed Kubuntu desktop onto Ubuntu and I don't have any shutdown or restart options shown in KDE, but they show up in Gnome. I initially installed Kubuntu using GDM instead of KDM and switched to KDM when I saw that my Gnome taskbars overlayed my KDE taskbars. To switch from GDM to KDM I used the following command:
sudo dpkg-reconfigure gdm
After enabling KDM the terminal suggested a command to configure KDM, however I can't remember the command. I ran it and I got a message that KDM was already configured.
View 6 Replies
View Related
Mar 20, 2011
I'm running Ubuntu 10.04 (and, on another server, 10.10) and can't seem to figure out how to remove the Shutdown and Restart options from the menu on the bottom right of the login screen.
I've tried
Code: gksudo -u gdm dbus-launch gconf-editor and checking the /apps/gdm/simple-greeter/disable_restart_buttons, but it doesn't do anything even after a reboot. I've also tried the above command as root (without the "-u gdm").
I have also tried adding the following lines to /etc/gdm/custom.conf:
Code: RebootCommand= ShutdownCommand= These seem to have no effect either. Is this a Gnome bug, or am I doing something wrong?
View 4 Replies
View Related
Jun 23, 2011
How to enable wooby effect (compiz desktop effect like ubuntu) in fedora 15.
View 1 Replies
View Related
Jan 7, 2011
I have a small question for you my friends."HOW CAN STOP BOOT SCREE AND RESTART ,WHAT KEYS ARE NEED?"I want to say thisC starts and I want to stop in whatever one point to read the messsage ,especially when I see "failed".I have 2 points with failed I can't have enough time because it's going fast.Of course I read the boot messages from /var/log but they are too long and to be honest evan I used in "gedit" the option "find" to search of raws with "failed" I can find some ,but other not.That's I think when PC start and if I can stop/PAUSE the boot process using some key combination I note and after I cancel "PAUSE" and PC continue the booting process.
View 4 Replies
View Related
Jan 6, 2010
I have been trying to fix this for some time, on and off, and have been unable to, I have also ben unable to find a solution in the forums.I have installed openSUSE11.2 GNOME on a laptop, the install went fine, and it runs great, except for two problems:When I start up the splash screen doesn't show (this isn't really important, and I am happy to watch as everything is loaded)When I shutdown/reboot the computer freezes and I have to use the power button to switch off.This doesn't happen every time I shutdown, but most of the time.The freeze happens at different points of shutdown, so I don't know where to find what is causing the problem.As I mentioned point 1 is not really important, although I would like to know why this is happening, but problem 2 is very important.
View 9 Replies
View Related
Nov 11, 2010
A few glitches aside, 11.2 has been very good. Today I installed realcrypt. While in yast, I noticed some other items were set to install. I accepted them along with realcrypt. After the install, clicking the -more applications- button (gnome) did not display the menu, just the mouse wait indicator. After a few tries, I decided to restart. Clicking shutdown did not present the normal menu, but instead instantly shutdown. On restart, I noticed 3-ish orphaned inode(?) messages. After boot completes I'm left with a black screen.I'm running 11.2 Gnome raid-1. The raid array appears to be fine. It emails status on boot, and I received those emails (via google) on the my laptop. I can boot to runlevel 1, so the question is, once there where do I look for cause / fix.
View 5 Replies
View Related
Jul 13, 2011
Does anyone know where there might be a log of the shutdown errors I see flash on the screen when I shutdown the system? I thought they'd be in the warning log. Or is there a way to freeze that screen so I can actually read what is happening?
View 4 Replies
View Related
Nov 26, 2009
I'm running openSUSE 11.2 Gnome Desktop Environment. Whenever I try to either shutdown or restart my machine as a "normal user", I've been logged off instead! When I try to re-login the screen (xorg) freezes. I don't know how to debug this problem. The problem could be related to hal or d-bus or policykit or X-org..... simply I don't know. N.B. I can shutdown and restart my machine only as "super-user" (root).
View 9 Replies
View Related
Jan 26, 2011
I had my netbook which is an Acer AspireOne lock up on me once earlier today and after doing a hard shutdown *holding the power button* and booting it back up I noticed that I could no longer reboot the machine from KDE's graphical shutdown button. Basically I click it and it pops up with the 30 second count down and then nothing. However I can run as root,
Code:
Shutdown -r now
and it will comply and reboot. I did notice that rngd was returning an exit status 1 and after some research decided to uninstall it with no change to anything. I decided to attempt and see if it was just a KDE issue as many problems have been, but when I attempted to log into Gnome I got a very nice white screen with one black line where the taskbar should be. Whether they are related or just coincidence I don't know.
I've ran my google researching skills into the ground on this one and I'm tired and a bit grumpy because I haven't been sleeping so it'd be awesome if I could get a heads up, because to my knowledge it's not reporting any errors it just seems to hang without sending the shutdown signals.
View 1 Replies
View Related
Aug 22, 2010
having trouble during the openSUSE 11.3 installation on my new computer. Basically after it is done copying files and once it restarts for the first time during the installation to do the automatic configuration no video appears and the screen is black.The laptop hardware is:
intel QM57 chipset
i7 extreme 920xm
quadro fx 1800m
am tired of windows 7 and it's deficiencies and would like to continue using this great operating system on my new computer.
View 2 Replies
View Related
Jul 23, 2010
Logout, Suspend and hibernate works as it should in my gnome-shell desktop.But Shutdown/Restart does not - I just get back to my kdm login screen again...how do I enable this ?
View 5 Replies
View Related
Jan 27, 2010
F12 current updates. The Gnome Desktop Background images are compressed in the horizontal axis enough to make a cessna 182 look like a disney cartoon. I am running 1280X1084 75 hertz update rate. The Gnome Image Viewer gives a correct image. The image I am running had to be stretched to fill the screen. I suspect the stretching algorithm is at fault. Is this a bug that need reporting?
View 2 Replies
View Related
May 21, 2011
Since upgrading to KDE 4.6.3 (from 4.6.2), I found the desktop names hadreverted to "Desktop 1", "Desktop 2", etc. I renamed them in "PagerSettings" but when I next logged on, I found they had reverted. I'verepeated it with a new .kde4 folder but that made no difference.raham Davis, Bracknell, Berks. E-mail: change 'boy' to 'man'openSUSE 11.4; KDE 4.6.3; AMD Phenom II X2 550 Processor;Video: nVidia GeForce 210; Sound: ATI SBx00 Azalia (Intel HDA);Wireless: BCM4306
View 4 Replies
View Related
May 25, 2010
Just got Ubuntu 10.04, Ive had some experience before with it but this is the first time I have completely removed Windows (7) from my system....
Okay, short and sweet, I have a Gateway Lt31 series netbook, It has a {Ati X1200 Graphics/video card}. I get really bad distortion on the top of my screen at all times, and at others the entire screen becomes Distorted. Sometimes the text becomes no mre than mere blurs and I cant see particular letters ( I cant see the "v,n, or o" right now).
Im downloading the 9.10 iso now and will downgrade if necessary
View 8 Replies
View Related
Dec 5, 2009
everytime I try to shutdown/reboot, it gets to the screen where it has the green/bold status messages on the side, but then it simply stops. The cursor doesn't blink, nothing happens...you could wait 10 minutes, and it would still be at that same screen. I don't know if I've described this well enough for anyone to understand, but I hope so! I don't have a camera, but if I did...I'd post a picture of where I mean...
But like I said, after getting to a certain, without actually shutting down, it simply stops and does absolutely nothing. This is rather inconvenient, and I'd like to find a solution to this if possible. EDIT: I'm sorry I didn't provide any hardware info, but I'm using Gnome...This didn't happen 100% of the time KDE like it does now though. (But it DID happen in KDE as well) I'm using OpenSUSE 11.2... I'll be back in a moment with hardware info, assuming it may aid in a solution.
[Code]...
View 8 Replies
View Related
Dec 30, 2009
I have a SMB share being mounted during boot using a /etc/fstab entry.All that seems to work fine, but on shutdown or reboot I found that the system hangs for a variable period trying to unmount the share. It appears from the log that the unmount is happening after the network connections are closed.Is there someway around this, or is there some other way I should be mounting the share so that it is closes successfully at restart or shutdown?
View 1 Replies
View Related
