OpenSUSE Install :: Possible To Have 2 Kernel Installed?
Jan 21, 2010
I currently have 2.6.31.8 installed on my netbook which causes problems, causing the netbook to freeze.
So, I downgraded to 2.6.31.5 and is working properly. Using Yast, I had marked 2.6.31.8 as do not install but after several days of use (by my kids) 2.6.31.8 mysteriously comes back and the system freeze again
How can I have 2.6.31.8 and 2.6.31.5 both installed on the same system so that I can avoid the trouble to manually reinstall 2.6.31.5?
View 9 Replies
ADVERTISEMENT
Oct 9, 2010
Hoping for some verification before I proceed.An alt kernel was installed side by side with the current mainstream kernel during an experimental NIC driver install. Unfortunately, since the experiment failed I would now like to remove all traces of the alt kernel since it was given a version ahead of the current main version and I would like to avoid all possibilities of contention should a future kernel upgrade use the experimental alt kernel's version number.
View 9 Replies
View Related
Dec 11, 2009
default in openSUSE 11.2 we have installed kernel-desktop. This kernel is optimized for the desktop.
What is the name of kernel optimized for server machine? In my case Firebird database + Apache + PHP?
View 9 Replies
View Related
Mar 23, 2010
when I open virtualbox OSE and tried to run a vm i get this error
Code:
Kernel driver not installed (rc=-1908)
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Re-setup the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. So i tried doing what it said and I got this error when i tried to run /etc/init.d/vboxdrv setup (as root)
Code:
Stopping VirtualBox kernel module done
Recompiling VirtualBox kernel module, NOT. It has been packaged.Recompiling VirtualBox
[code]....
Then i ran dmesg and there was a ton of stuff that seemed to be unreleated so i ran dmesg -c to clear it. then i ran the vboxdrv this again then checked dmesg again expecting there to be nothing but the vboxdrv stuff but it was still blank.I really dont know what to do at this point I tried uninstalling and reinstalling but that makes no difference
View 6 Replies
View Related
Oct 16, 2010
When I start up a virtual machine in Virtualbox on Suse 13.1 I see this message:Kernel driver not installed (rc=-1908)
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing '/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary.
View 7 Replies
View Related
Oct 21, 2010
I have downloaded vbox from its site and installed it. I created a vm but when I try to start it, I get error:
Kernel driver not installed (rc=-1908)
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing:
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary.
And when I try 'sudo /etc/init.d/vboxdrv setup', I get:
Stopping VirtualBox kernel modules done
Uninstalling old VirtualBox DKMS kernel modules done
Trying to register the VirtualBox kernel modules using DKMS failed
(Failed, trying without DKMS)
Recompiling VirtualBox kernel modules failed
(Look at /var/log/vbox-install.log to find out what went wrong)
And this is /var/log/vbox-install.log:
Makefile:159: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
View 9 Replies
View Related
Sep 9, 2010
I managed to install Virtualbox on my opensuse 11.2 I configured it for a windows xp guest OS. When I start the guest OS, I get error mesages.
[URL]
When I execute the command "/etc/init.d/vboxdrv setup" it failed. I checked the directory and saw that the file vboxdrv is missing.
View 9 Replies
View Related
Feb 11, 2010
A few days ago yast did update my computer to a new kernel-desktop 2.6.31.12-0.1.1.
My mainboard is an ASUS P4P800-VM with Intel ICH5 chipset. This new kernel is not able, to poweroff my computer. Older kernels were able to poweroff the computer.
How can I roll back to the older kernel? Yast does only offer the recent kernel.
In /boot there are only files of the recent kernel.
ASUS P4P800
Intel Pentium 4 HT, 3000 MHz, Frontside 800 MHz/Cache 1 MB
3 GB Ram
AGP nVidia 7600GS/512 MB, nVidia driver 190.53, installed from yast.
PCI WLan TP-Link 951N (Atheros chipset, WLan N, driver ath9 was automatically installed)
View 7 Replies
View Related
Jul 1, 2010
Unable to run VB, I get following error -
Code:
Kernel driver not installed (rc=-1908)
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. I've dkms installed and did a reboot as well.
View 9 Replies
View Related
Oct 9, 2010
I can see this error occurring in multiple past versions of suse. The answer seems to involve recompiling the open source version of VBox, but this is surely overkill. Isn't there a way to either a)get the right kernel version of VBox for 11.3 or b)set whatever permissions are required.
In all the answer so far I can't see a solution I can understand for these combinations, sues 11.3 and VBox 3.2.8. The error is consistent, and if the install doesn't work properly (it took my a few attempts even to install it without error messages) then surely its an issue either for Oracle or Suse? It runs ok but hwen trying to fire up a newly created XP VM this error message occurs trying to switch from W764bit to suse11.3 64bit
View 2 Replies
View Related
Dec 23, 2010
I am eagerly awaiting my newly purchased lenovo sl510 and once received intend on loading opensuse 11.3 onto it as my primary os. I understand this particular laptop has had some issues with acpi.
Can anyone comment on how this is now with newer kernel releases since the default installed with the opensuse 11.3 DVD.
View 9 Replies
View Related
Feb 23, 2010
I am an experienced Linux admin and have been using SuSE for many years. My development machine has had every version of SuSE since '02 and although it is a little old, is in good working order. (AMD
2400, 2 gig RAM, 160 Gig IDE disks - SuSE on disk 2) (OpenSuSE 11.1 with the latest kernel works perfectly. This install is on a spare HDD prior to doing a full install on my usual HDD.)
When I try to install SuSE 11.2 from DVD, the load kernel operation hangs at 97% (using both normal and safe kernel), however, I can install from live CD without any problem. I have tried the same DVD on a few "older" machines and had the same problem. I initially thought it was the actual DVD but re-burning has the same problem. I have also tried another DVD writer - same problem.
View 1 Replies
View Related
Feb 11, 2010
I have a system running openSUSE 11.2 with Desktop and XEN kernel, as well as Windows 7 (not by choice though...). I have noticed a strange time issue, with Windows 7 and the desktop kernel the time is correct (like for example now: 1:32 PM) but in the XEN kernel it is ahead several hours (6:32 PM). If it was an issue between openSUSE and windows then I would think that it is a problem with the system clock but I don't know what would cause a time issue between kernels like that.
View 6 Replies
View Related
Jul 21, 2010
differences between Kernel Default and Kernel Desktop? I've found some past threads like this link and this other link, and some other google info, which suggest the only difference would be the io scheduler. Also, I see the default grub choice is "Desktop" and not "Default", so I take this as a suggestion to prefer one over the other.
However, my broadcom 4312 wireless only works on the "default" and not on the "desktop" kernel, so I guess there must be other differences. I just want to evaluate which one is the less long-term risk option to go.
View 1 Replies
View Related
Jun 10, 2010
I successfully installed OpenSUSE on a 4gb pen drive using the instructions contained within this portal. However, for the life of me I can't figure out why the persistent feature doesn't work.
Here's my partition table map:
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[Code]...
View 1 Replies
View Related
Nov 23, 2010
I have a box already has openSuse 11 32bits installed. I want to replace it with openSuse 11 64 bits. When I insert the openSuse 11 64 bits CD, I got error message "this is a 32 bit computer. Can not use 64 bit software". so How do I wipe out the old OS (32 bits), and install new OS (64 bits)?
View 7 Replies
View Related
Dec 14, 2009
I'm trying to install some wireless drivers, but apparently I don't have a /lib/modules/<kernel>/build directory, which is causing the Makefile to throw an error. Is there a specific place I should point the Makefile at?
View 9 Replies
View Related
May 29, 2011
I had recently installed the kernel sources so that I could compile the VirtualBox kernel module to use well but I had not restarted afterwards. I had been using my system problem free until tonight when I decided to restart. I had no internet connection and through ifconfig showing only lo and ifup eth0 returning "device eth0 is not accessible", I discovered I had a bigger problem than at first thought. Then I discovered that no PCI devices other than video were working, and so I referred to /var/log/messages and discoverd a line stating that "/lib/modules/2.6.37.6-0.5-desktop/modules.dep : no such file or directory.
All other entries in that directory were some version of 2.6.37.1-1.2.
Unfortunately I had to end up reinstalling because witho
View 4 Replies
View Related
Apr 28, 2010
I'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
View 7 Replies
View Related
Jan 31, 2010
I was installing the kernel-pae, in the middle of the installation it said it couldn't resolve some dependencies. it ask me to ignore or cancel I chose to cancel there after my system froze.
Now I cant boot any more I get the following:
View 9 Replies
View Related
Jan 25, 2011
I'm running 11.2 with standard repositories (plus packman). I want to install a recent kernel and then compile some variations of it (to investigate a hardware problem).
So I took these steps:
(1) add the 11.2 Kernel:/HEAD repository
(2) enable multiversion in zypp.conf
(3) use YaST software management to select the kernel development pattern
Note that at the moment, the standard 11.2 kernel ( 2.6.31.14-0.6-desktop) is in use and I have not selected any packages from HEAD. But it has installed 2.6.37-41.1 versions of all the kernel packages I didn't already have (source & docs etc) instead of the 2.6.31 versions. /usr/src/linux symlinks to linux-2.6.37-41 instead of to a directory for the running kernel!
(1) it should have loaded the packages corresponding to the running kernel
(2) it's not supposed to switch repositories
View 7 Replies
View Related
Jan 3, 2011
Installed kernel-rt-2.6.31-6.1.i586.rpm for low latency studio recordingreboot then immediately black screen.Ctrl+Alt+F1 not working Ctrl+Backspace not workingcannot get in console modeGraphic adapter : Geforce 6600Opensuse 11.3
View 9 Replies
View Related
Mar 28, 2010
Datacrow installed from one click install for openSuse 11.2Problem: can't open image file.message: 02:37:52 - An error occured while reading the image02:37:52 - javax.imageio.IIOException: Invalid argument to native writeImage
View 1 Replies
View Related
Dec 19, 2009
Text does not scroll properly in terminal windows or in any KDE4 application window including Yast's windows.
When I scroll up or down the text either rolls in the upper line or two in a window or the lower line or two and nothing rolls in the middle.
View 1 Replies
View Related
Apr 21, 2010
lol got a update for blinken wich is a game (recommended update LOL) but its not installed well where r we here today that we need a game for kde as a dependency for a good working linux ? BTW i got bored by the always appearing off it while its set on taboo
View 1 Replies
View Related
Jul 15, 2010
Just installed 11.3 KDE 64bit and I get this error:
PackageKit Error internal-error: Installation aborted by user
I didn't do anything. What does this mean? How can I get Package Kit installed?
View 6 Replies
View Related
Oct 7, 2010
i really like opensuse because it looks cool, heard it has th ebest kde out there, and seems very professional compard to ubuntu and kubuntu and minti have one problem stopping me from using kde, and its in all versions.i use a pppoe connection, and in gnome i simply right go to edit connections, DSL, make new dsl, enter my information, set to connect automaticcly, go to auto eht0 disable connect automaticcly, boom internet at startup. i cant find out how to make a pppoe connection in opensuse at all in fact.the DSL in internet manager is greyed out.this should be something very simple to do, how do i go about doing it?
View 9 Replies
View Related
Mar 28, 2011
im very slowly migrating across from Windows to OpenSuse. However i have a few quarms about the system and how it works.
1. Add / Remove programs.Is there a way to see a list of software that you have installed and is it quite easy to "un-install" it? I have installed Compiz and then when i went to remove it i could see 10ish items called Compiz. I was confused about how to uninstall it all from my system successfully without getting rid of something i need.
2. Software packages.I have tried to install packages from the OpenSuse site and I'm not sure what has happened to it. I have installed Virtual box from here and nothing has happened. I cannot search or even see Virtualbox anywhere. What im wanting to do is run OpenSuse as my Primary OS and then run Windows 7 on VB so i can continue to work as normal under it.
3. OpenSuse in a Microsoft domain.Is this possible? At work we use a Microsoft domain but is there a way i can install the Admin tools for OpenSuse so i can continue to work as normal by for example using Active Directory etc etc.
4. Device Manager?In Windows you have the "Device manager" a very handy tool that tells you what is on your computer, what drivers are missing and need installing etc. I can't see anything like this in Suse. Im not sure if all my hardware is installed once i am in Suse like Graphics cards, sound card, network card, card reader, and anything else that is on my PC etc.
5. Partitioning. Can someone give me a good description on how OpenSuse partitions your hard drive. I have seen it gives you a "swap?" drive etc but unsure as to what this is.
View 3 Replies
View Related
May 19, 2010
Deleted my ati drivers accidently during a botched upgrade. Have been trying to fix the problem from things I read on here, made a thread but can't get online to execute it.Found my install dvd tried running repair and in the process deleted my windows partition(anyway to get that back?) and still no previous ati drivers or gnome installed.
When I boot up i see SUSE LINUX not opensuse... no grub So my question is how do I install ati drivers from the dvd and how do I install gnome or kde from install dvd? did i royally mess up and basically now just completely reinstall opensuse 11.2 completely? and if so can I recover files from my deleted windows partition and previous opensuse partition?
View 5 Replies
View Related
Dec 27, 2009
Since I had a little time on my hand over christmas break, I decided to do my sister a favor and install linux on her computer (consentually, mind you). But so far, I've caused nothing but trouble, since I can't get Suse to boot. I've reinstalled over and over and over, but everytime I install and reboot, the computer complains that there is no operating system installed.
After a while of reinstalling, I tried to install a boot loader from the live cd instead, but when I open yast to do this, it compains that 'because of the partitions, the bootloader can't be installed properly'.
I've tried pretty much about everything, but nothing seems to work.
View 4 Replies
View Related
