If some one can tell me how to get Gnome 3 shell to try it out.I have the 11.4 Suzy gnome edition from Live CD. I tried to find Gnome 3 in the Install/remove software, after reloading it, but it i snot there.
View 3 Replies
Has anyone enabled Gnome Shell in OpenSUSE 11.3 and able to explain how to do it? Annoyingly Novel's press releases mention Gnome Shell is included, but there seems to be no obvious way to activate it.
View 9 Replies View RelatedHas anyone had any problems using vlc player in gnome shell, when i try to play a cd it will play for a few seconds then freezes up. I have tried uninstall and reinstall but same, tried upgrading to beta but same problem.
View 1 Replies View RelatedI downloaded the 64bit Gnome Live CD to play around with it.. I thought there was a new Gnome shell, new interface etc. Am I missing something?
View 1 Replies View Relatedi've finally got a NIX environment...yipee! Installed opensuse 11.2 in a dual boot with windoze with no problem whatsoever. unfortunately, my NIX skills are sadly dated or maybe things have changed or both. in any case, i have a rather trivial problem that i have not been able to figure out.
i go to gnome terminal to get to the bash shell, no problem except when i do things like cat, less and so on. the commands do what they do then when done the last line output is "some text" and "(END)" - at the completion of the command it does not return to the bash shell. i've tried ctrl-everything, enter, escape, actually all keystrokes i can think of to get back to the bash shell...no luck. man and docs have not been helpful or i simply missed the answer (i'm a little saturated at this point).the only thing i've been able to do to solve my dilema is close the terminal an start a new instance, not elegant but works.
i tried gnome shell from the software center, but it has some graphics issues. Is it my graphics driver?
View 6 Replies View RelatedLogout, Suspend and hibernate works as it should in my gnome-shell desktop.But Shutdown/Restart does not - I just get back to my kdm login screen again...how do I enable this ?
View 5 Replies View RelatedGNOME 3 issues, I got everything figured out and was trying to get some extensions installed. I successfully installed the alternative shutdown menu and the applications menu. I tried to install alternate-tab and user-theme and they both caused gnome3 to boot into IceWM...I removed all the folders from /usr/share/gnome-shell/extensions and home/<user>/.local/share/gnome-shell/extensions and it fixed it. I read somewhere about them being outdated if a GNOME 3 update was released.
The two extensions I did install were from New GNOME Shell Extensions That Provide A GNOME2-Like User Experience ~ Web Upd8: Ubuntu / Linux blog and not the GNOME 3 website. The extensions that crashed GNOME were from all over, INCLUDING the GNOME website. I'd like to get the system monitor and a weather applet in the panel and the alternate-tab and change themes but I can't find any that work. [URL]. I tried to use the themeselector extension from here and I think another one or two, however, they were also a few that crashed my GNOME...
I've been having some problems and was trying to diagnose them. My graphics were going wonky at the BIOS stage (spots, letters changing colour, and even the very first screen of nVidia details swapping "version" for "versikn") so I went to try a new graphics card. Not long before I got my new graphics card, Gnome 3 really started playing up and did the "oops, a problem occurred" at every login. I created a new account and got the same behaviour. I swapped my GeForce 7950 out for a GeForce 7300 that I scrounged up. The spots and changing letters disappeared, so I knew that at least part of the issue was the graphics and not something else (e.g. motherboard or memory). I still got the "Ooops" screen, so I knew that wasn't caused by a bad response from the graphics card or anything.
I've since nuked the install (which started out as 11.4 RC1 with GNOME3:STABLE) and re-installed from a new download of the 11.4 DVD plus GNOME3:STABLE (in accordance with these instructions) with all of the updates. I can now log in without the "Ooops", but if I am using the proprietary nVidia drivers then the display won't repaint after a few seconds (long enough for Gnome Do to appear, but not long long enough for me to do anything else) - clicking on Activities or on the menu in the top-right doesn't seem to do anything. If I Ctrl+Alt+F1 then Ctrl+Alt+F7 to skip to a terminal and back then the cursor is still there, but the screen is blank.
If I swap to the Nouveau drivers then I can log in to Gnome Shell and it continues to render, but even simple things like dialogs folding down from the top of their parent window can grind along and take a few seconds to finish painting. That is on the 7300 rather than the 7950, but I haven't swapped the cards back as I'm still suspicious of how healthy the 7950 is. I've not seen anything that appears relevant in the XOrg log, but given that X will reboot and isn't completely hung then it could be a repaint bug more than an error. I've tried all of this with clean accounts with the same results, so it wouldn't seem to be any of the standard .gconf/.dconf etc folders.
I've just installed the latest OpenSUSE 11.3 Gnome 3 Reload [and in so doing, by the way, replaced two other oses one advertised as something else but turned out to be what I regard as a poor imitatian of OpenSUSE 11.3 (and to add insult to injury it even identified itself as OpenSUSE 11.3 after install!) and the other a Linux distro more popular than OpenSUSE but failing to deliver a working Gnome 3 shell].
Which brings me to the subject at hand: Gnome 3 shell. I'm presently using the Gnome 3 panel (which I got after having to select the failsafe option after rebooting). OpenSUSE's Gnome 3 shell display is all jumbled up to the point of being unusable. Although I couldn't make out any legible print in the terminal (most of the Applications icons are recogniseable if rather tattered-looking), I had hoped I could still type in su>enter>password>enter>nvidia-xconfig>enter.
What do I do now to get a screenshot-like Gnome 3 shell display? I realize that this computer is rather resource-shabby, but I figure that if it'll run MintMenu, it should be able to run any other Gnome shell.
The gnome-shell-extensions have been accepted into the stable repository and should appear soon along with an updated gnome-shell. Now, if you installed the extensions for my factory branch whilst I was working on the extensions, you need to remove the repository and remove the installed packages as there have been some name changes to the extensions. I don't recommend the xrandr extension, it will crash the shell! If you do try it, you only need to do a ctrl+alt+F1 and login as root user and zypper rm, logout and ctrl+alt+F7 and login.
View 9 Replies View RelatedI have lost some icons from my desktop, they are, firefox, yast, thunderbird, emacs, the space and the names are still there, and when I hover the mouse over the space, it is highlighted as it should be. The application opens and runs as normal when I click on the space where the icon should be. The icons are also missing from the favorites bar on the left side and also from the panel top left when the app is running.I have tried, rebuilding the icon cache in 'usr/share/icons/hicolor', and also all othercon caches for that matter, and no difference. I tried uninstalling and installing the app, no differenence. I tried changing themes and icons from Tweak Tool, no difference. As far as I can see the icons are there in the hicolor directory
View 9 Replies View RelatedI installed 11.3 last week and eventually got nvidia drivers working. I was quite happy how most things were progressing, then the temptation to upgrade to 11.4 got too much I upgraded today (online, not dvd) and everything went well. On rebooting the desktop came up as normal and all was good. I installed nvidia and got that working ok. I then installed Gnome-Shell and couldn't figure out how to get it working. I've been using Fedora recently and the Gnome-Shell option is available at Login. I then discovered the gnome-shell --replace terminal command and I tried it. It seemed to load ok, but as I had used the terminal, when I closed the terminal it seems like compiz crashed. I lost all windows borders and nothing was usable. I REISUB'd and started again. On reboot I got a CLI login prompt. After logging in I tried startx, to no avail. I then tried gdm start and got to the desktop again (not gnome-shell). I Alt+F2'd and ran gnome-shell --replace again and all was good - except no network I rebooted again, and got the CLI again. Went through it all again and tried to configure network (wireless) no good. I then connected an ethernet cable and tried again. That worked, but I'm not sure why - I didn't think anything was downloaded. Anyway wireless now works ok - even on reboot. However I'm still getting dumped to the CLI login on restarts.
View 9 Replies View RelatedI have recently been pulling my hair out with Gnome-Shell. I had Gnome3 including the shell up and running as soon as it was ready in the stable repos. However it recently refused to work after the update to 3.0.1 hit the stable repository. Today I did a complete reinstall of OpenSUSE 11.4 from the gnome desktop CD, NVIDIA drivers are correctly installed and working. Gnome3 has been installed via the one-click method on top of this FRESH install. Yet still my gnome-shell freezes after login, I am running in fallback mode now. Really cannot see what can have gone wrong this time, nothing out of the ordinary has been knowingly installed at all. I'd really love to get my desktop up and running to how it used to be.
View 9 Replies View RelatedIs there any way I can switch my desktop shell from unity to, say, gnome-shell? I can switch using other console shell I like (bash, csh, fish, etc.). Assume that there is a stable alternative desktop shell, I should be able to choose, too.
(For console shell, we goes to /etc/passwd. But for desktop, I can't find the way to config.)
is there some wiki page on GNOME or Fedora that list which graphics cards work without problems on Fedora 15 with GNOME Shell? I have tried 3 older cards and they all failed, so I would like to share this info with others so people know which cards to avoid if they want to use full features of GNOME 3 via GNOME Shell.
View 1 Replies View RelatedPlease excuse my ignorance, but I need to get it straight. I've been reading and trying to find out more about these three new desktop environments, but still am rather confused. I have had Unity on my netbook for a couple of months now and know it inside out (more or less by now). The problem is: what is the main difference between Gnome 3 and Gnome Shell?
To my understanding Gnome 3 will be a continuation of the panelled Gnome we are so used to? But then I read the panels will be gone forever, so I'm confused again Gnome Shell is somewhat similar-looking to Unity, but I haven't had a chance to try it properly yet.
I installed Gnome 3 on Natty successfully, despite some minor glitches. It works fine, but recently I found some nice screenshots that looks quite different from which I get, and from others I saw before. You can found it in this link: [URL] Some one knows to what the differences are due?
View 2 Replies View RelatedIs there any easy way to do that in gnome shell with a key shortcut or setting it up like in gnome2 days with a hotspot?
ctrl + alt + d - should minimise all windows and focus the desktop - but it's not working for me?
I'm using F15 and I have big problem. Sometimes GNOME-Shell is taking too much CPU, and my computer is slowing down. This is "top".
Code:
[kuba@Kuba-fedora ~]$ top
top - 16:08:18 up 2:05, 2 users, load average: 0.45, 0.49, 0.43
Tasks: 159 total, 3 running, 156 sleeping, 0 stopped, 0 zombie
Cpu(s): 29.2%us, 2.8%sy, 0.0%ni, 67.1%id, 0.5%wa, 0.0%hi, 0.4%si, 0.0%st
[Code].....
I just upgraded to beta 10.04, & am trying to get GNOME-shell installed. I have downloaded the tar file for it, but when I do ./configure in a terminal, I get the following error messages:
No package 'mutter-plugins' found
No package 'gjs-gi-1.0' found
No package 'gobject-introspection-1.0' found
I am trying to install gnome-shell. It *seems* to work fine for the most part, but in the terminal, I get the following:
Code:
When trying to install gnome-shell I get this error:
sudo apt-get install gnome-shell
davek@davek-laptop:~$ sudo apt-get install gnome-shell
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
gnome-shell: Depends: libgjs0 but it is not going to be installed
E: Broken packages
davek@davek-laptop:~$
What would be needed to fix broken packages?
I'm running 10.04 32bit
Where is the off button on Gnome 3 shell?
View 1 Replies View RelatedI have seen many reviews of 11.04 beta with option to upgrade from 10.10. Can somebody confirm that it could be done without damaging the present gnome. I do not want Gnome shell/Unity as the DE in 11.04 too.
View 1 Replies View Relatedthe whole "Unity" thing didn't appeal to me that much, i installed gnome-shell.everything went well except there doesnt seem to be any themes to windows and stuff now, the gnome-shell looks great, but open up a program or file browser and its all grey and buttons and menus are blocks, no minimize or maximize buttons (not sure if thats a gnome thing now) but just a blocky X in the top right corner to close windows.
View 2 Replies View Relatedgnome-shell seems to go into loco mode sometimes on my computer... among other problems I'm having this one is the worst. So far, it *seems* to happen after a flash movie is loaded in firefox, although I can't tell for sure if that's the case... Flash performance for some reason is crap anyways on here, I don't know if maybe I need a different version of flash? Anyways, if you guys have any clues as to wth is going on, that would be awesome! I'm a bit of a newbie so treat me nicely
Just a quick update - reloading with r seems to fix the CPU usage issue... until it happens again...
Code:
I've noticed when someone calls attention to my name in xchat or if I get an instant message, I don't get a notification about it unless I happen to go into the dash. Then I see someone highlighted my name or instant messaged me. Is anybody else having this?
I'm running Ubuntu 11.04 with the Gnome 3 PPA.
I feel like this is a RTFM question, so if anyone wants to just direct me to the right manual, that's fine.
I just installed gnome-shell and i cant seem to find anyway to customize anything, esp. the task bar, the clock, et cetera
is there a preferences gui or something that I cant find? I feel like i'm trying to use a mac....
It seems pretty sweet, but, i dont know how to get used to not having a window list... i dont wanna pull up the "activities window" or alt tab every time i want switch windows (esp when my hand is used to just moving to the top of the screen and clicking on the right window...
There's this autohide taskbar at the bottom of the screen, but i cant for the life of me figure out what it's for, or how to put things on it....
I see in Ubuntu 10.04 there is a PPA repository for latest gnome-shell, and it contains a newest version, the included in fedora 13 is older.
Is there a repository out there with the latest gnome-shell?
