I have an sony vaio laptop and the screen is pretty small so i have connect to tv with a HDMI cable but opensuse doesnt show on the tv. How do i output either the same screen or an extended desktop ?
View 5 RepliesThe display under vlc is strangely colored in blue, or red missing. Anyway the balance isn't correct. I tried every output module but no one is correct. I am running 11.2/kde.
View 9 Replies View Relatedi have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies View RelatedI recently upgraded to suse11.4 and everything worked fine for a few months. Suddenly after logging in (GUI - LXDE desktop) the background screen is all what I can see and no menus, not even right click opens anything. Same in KDE desktop. All I can do is throw myself out with Ctrl Alt and F1. startx returns that the server is already running. All I can do is using (as root) "rm -rf /tmp/X0-lock" and then "startx --:1". That opens the GUI but only as root. What can I do that I can log in normally again? By the way I tried to reinstall but I only get to loading drivers and then everything stops.
View 8 Replies View Relatedi installed opensuse 11.4 on my laptop (Lenovo T60, Mobility Radeon X1400). It worked fine for some weeks, the first problem that I found was that libreoffice did not work. Calc crashed immediately (screen looked "destroyed", only the panel was really visible, but the system seemed to work so I could log out without alt+ctr+del), writer had the problem after opening some menu options. Now (one week later) after start and login I could not see the panels anymore, I could start programs but those would not be displayed, I only saw the desktop. After restarting, I cannot even log in anymore, the screen looks destroyed as with libreoffice. I created a new user, this works and this is from where I write.
View 2 Replies View Relatedi just installed opensuse yesterday and it's very nice. i wanted to install the driver for my ati mobility radeon hd 5470, so i followed the steps on:SDB:ATI drivers - openSUSEunfortunately, after the reboot, opensuse had booted but there was nothing on my screen (basically, just a blank screen)
View 7 Replies View RelatedI have just upgraded from OpenSUSE 11.3 to 11.4, and now regularly about every 15 minutes my monitor display goes blank for a split second. My video chip is NVIDIA GeForce 6100.
View 2 Replies View RelatedThis is the 2nd time this has happened. I installed 11.1 & 11.2 later. After the install I would get the login screen just fine and then when it starts running everything goes white. It is an issue with compiz and my graphics I assume. The interesting part is in opensuse 11.0 I had all compiz items not installed. When I installed 11.1 & 11.2 they reinstalled. For next time is there a way to not have these installed on the install? What I had to do was login in a different session other than Gnome. Then go into yast and remove compiz. Then logout and log back in with gnome and the white screen is gone.
View 9 Replies View Relatedi just installed opensuse 11.4 on my system(gigabyte 7n400pro2,amd athlon xp 2.8ghz,ocz vertex2 ssd,ati radeon x1550) and i have this strange problem: the screen gets blank(for about a second) every 40-50seconds. everything else works fine.
View 5 Replies View RelatedI know that you can make it full screen, however it just makes the background OS's background black, and still provides a smaller display. Is it possible to make the guest OS's screen (or display) full size?
View 6 Replies View RelatedI am a brand new user coming from the MS environment. My impression of openSUSE is that it is like moving into a new house that is well built but the rooms are full of half-constructed self-assembly furniture and appliances without any specific instructions. Nor is it clear which does what and whether all are needed or not. There is a town hall down the road where fellow homeowners gather to discuss what each has managed to deduce about putting their own furniture together. The town hall has a sort of library where thousands of pieces of paper with instructions are stored in an ad-hoc filing system
My latest problem is that I have created a screensaver via the "Configure Desktop" application and set "Enable display power management" and set some timeouts.However, I seem to be asked for a password to unlock the screen when I come back to my computer. I have spent 2 hours trying to find the place where I can disable screen password locking but to no avail. I am perplexed and frustrated at how such an obvious function is so ****ed hard to configure. This is the impression I am getting of Linux in general - it is novice user-hostile and badly organised.
i am having problem with displaying my text. my text file is displayed in such a way and is called test.......
Code:
Sam Worthington ... Jake SullyasZoe Saldana ... NeytiriasSigourney Weaver ... Dr. Grace AugustineasStephen Lang ... Colonel Miles QuaritchasJoel Moore ... Norm Spellman (as Joel David Moore)asGiovanni Ribisi ... Parker SelfridgeasMichelle Rodriguez ... Trudy ChaconasLaz Alonso ... Tsu'teyasWes Studi ... EytukanasCCH Pounder ... MoatasDileep Rao ... Dr. Max PatelasMatt Gerald ... Corporal Lyle WainfleetasSean Anthony Moran ... Private FikeasJason Whyte ... Cryo Vault Med TechasScott Lawrence ... Venture Star Crew Chiefmore
What i am trying to do is for the program to read "as" and then from there start a new line... thus the expected output is...
Code:
Sam Worthington ... Jake Sully
Zoe Saldana ... Neytiri
Sigourney Weaver ... Dr. Grace Augustine
[code]....
I keep getting the error saying ...
Code:
editmain.cpp.98:error: initializer fails to determine size of 'str'
what does this mean, and how can i be able to format my file in the way i want?
I am trying to run a java .class file by double-clicking it. So far my attempts at running it have been successful, but I don't' know how to keep the display open to see what the output is.
View 6 Replies View RelatedI have two computers both running Ubuntu 10.04. I use my laptop to ssh to the other computer. If I start for instance firefox via ssh from my laptop to have the browser showing up on the screen attached to the computer I ssh to? The computer i ssh to is better in handling graphics so I want to connect it to the TV and use my laptop as remote-control.
View 9 Replies View RelatedI am trying to use awk command in perl. Below is my awk comamnd which works alone.
awk '{Easttot=Easttot+$1} END {print Easttot}' MessagesProcessedEAST2Cnts.dat
I would like to use this awk's output in shell script. I am using system command like below to get the out put. But it is not working.
$Output = system("awk '{Easttot=Easttot+$1} END {print Easttot}' MessagesProcessedEAST2Cnts.dat'");
I am using a 64-bit Slackware 13.1 distro (I chose 64 by mistake, to be honest, as I know there's less trouble with a 32-bit distro) and I have some problems with my consoles (in text mode). After changing the runlevel in ininittab to graphic mode (4), I can't enter any of my consoles. Actually, only ctrl+alt F1 shows some output, regarding the graphic mode (I'm currently using KDE4, the default for slackware 13.1) and F6 is the only normal consoles I have access to. However, if I log out and log in (with another user, maybe) there's no output anywhere (not on F1, neither on F6).
View 1 Replies View RelatedI use 'grep -Ri "mypattern" .' to search for all files in the current directory recursively that contain "mypattern". But this command returns every single occurence, so that if a given file has several occurences of the pattern, the screen fills up pretty quick. More than likely, there's a way to restrict the output so that it only displays each file once, no matter how many occurences it contains, but I couldn't find how to do it.
View 2 Replies View RelatedThough I have little experience in the past, i just can't get to work what i have in mind.i want to display part of an output stream.
cat sample.xml
<packet or="recv" ljid="d.sample@test.local/" ts="20110204T15:02:55"><message from='j.sample2@test.local/' to='d.sample@test.local' type='chat' xml:lang='en' id='sd61'>
[code]...
I have a Dell Latitude D610, and am running a 2.6.21.7 kernel. If I close the screen on the laptop, the display output switches to the external VGA output. When I open the screen, the display output does NOT switch back. This occurs when running X and when in command line mode. Is there any way to get the output to automatically switch back when I open the screen?
View 2 Replies View RelatedIs it possible to get WGET to only show download progress e.g. download bar, opposed to all of the connection info, as it does look a little ugly on the client side, is this possible to do?
View 2 Replies View RelatedI am beginner in ubuntu. I wish to run the programs that will display a picture which use the ffmpeg, sdl and lame. When I type gcc -o exercise exercise1.c 'sdl-config --cflags --libs' to compile the program it give this such of error :gcc: sdl-config --cflags --libs: No such file or directory. I have installed the gcc packages, SDL, FFMPEG, LAME but still cannot display the output. What should I do with the gcc packages?
View 1 Replies View RelatedI have a file that contains "ls -la" output. I would like to display only the filenames, none of the other information before it such as permissions, ownership, size, and date.Would the cut command be the best way to hit this, or should I use Vim or sed?
View 6 Replies View RelatedMy script is not diaplying output as it contains awk while iterating over the array. My script is as follows:
shortcodes=( "56882" "58585" "58888" "57575" "57677" );
for shortcode in ${shortcodes[@]}
do
echo "`awk -F"|" '/ShortCode=tel:$shortcode/ { arr[substr($2,1,4)]++ } END { for( no in arr) { print no , arr[no] } }'
[code]....
I am running a scan via nmap (nmap -sP) and the out put looks similar to this:
Nmap scan report for x.y.z.com (10.x.x.x)
Nmap scan report for 10.x.x.x
If it can resolve the hostname it does, if not it just spits out the IP. I would like to know the best syntax to use with cut, or awk, so that the only output is either the IP or IP - HOSTNAME.
Consider a situation in which you want to display only specific lines of contents from a file or of a command's output. Yes, we have head and tail commands. But, how to view all the lines of a file except the last one or vise versa when we don't know the count of lines in advance?
Consider this output:
Code:
[root@localhost ~]# ps au | grep bash
root 6316 0.0 0.0 4672 1440 tty1 Ss+ Apr22 0:02 -bash
root 20847 0.2 0.0 4672 1432 pts/0 Ss Apr23 0:12 -bash
root 21167 0.0 0.0 3920 660 pts/0 S+ 01:00 0:00 grep bash
Here, I don't want the last line (in italic) to be included in the result since the last line is due to "grep bash" in the devised command "ps au | grep bash". Well, we can rewrite the devised command:
Quote:
"ps au | grep bash | head -n 2"
But, again, here we are specifying the count of lines to be included. But, in the presented problem we don't know any count in advance!
we have installed centos in our organisation on vitual box.it gives display only in the middle of screen.i want to set it on full screen. when i select full screen option the back black screen become full but the display is same. how can i adjust it on full screen?
View 2 Replies View RelatedThe video projector I have to use this week projects an image too large for its screen and spills over on every side.
Fixing the physical setup is not possible or at least unlikely for the moment: the only solution is to carefully resize and position windows so that they display in the visible part of the screen - using full-screen mode is out.
Is there a way around this via software, using xrandr for example?
# xrandr doesn't have a padding option...xrandr --output VGA1 --mode 1360x768 --left-of LVDS1 --padding 200
I have a fresh install of OpenSUSE 11.4 64bit and I have installed the AMD Display drivers for my Radeon HD 5970. Everything seems to be working quite well. I have a multiple monitor setup (1280x1024 monitor and a 1920x1080 monitor).
I have my primary display set to 1920x1080, however when I try to enable the second display, I get a CRTC error that the display is over the maximum (1920x1920). If I enable both monitors at lower resolutions, there is no problem.
I have done a fair bit of reading and have been unable to determine where this maximum is set, or how to change it. I'd like to be able to run both monitors at their native resolutions.
first of all, during last few days I've visited this forum and asked for help, all in trying to fix the problem which I had. I failed to do so, and I am really frustrated now, as it is off very big importance.I'm huge fan of linux and fedora, so it kills me to have to boot to windows to do simple thing.
Problem: I bought DELL Vostro 3300. When I try to connect it through VGA(only output it has) to my monitor (tried different monitors, same effect), my screen wobbles. The higher the resolution -> higher the wobbling is. It is almost impossible to read text due to this. I attached extension which I recorded the wobbling (mp4 extension). Wobbling is even during linux startup, before xorg is loaded.
On lowest resolution wobbling is very little. It's same on different frequncies. I've tried different kernels but with no success.
What's important, it's not faulty hardware, since it works fine on Windows.
The problem has same characteristic as one mentioned here in buglist. In new kernel it's supposed to be fixed as I understand(?) but it's not for me.
I have two monitors on my Ubuntu 11.04 system. One of the monitors is an Insignia 32" tv. My problem is that the output from the computer is too big for the screen (when windows are maximized they extend past the edge of the screen). I have tried changing settings on the tv which failed, and cant seem to find a way to do it with either my proprietary drivers or the standard Ubuntu Monitors thing.My video card is a Radeon HD 4670.Currently I am not using proprietary drivers
View 2 Replies View Related