OpenSUSE Hardware :: 11.3 - Usb Devices Not Showing Up?
Feb 7, 2011
i've recently installed opensuse 11.3 on a toshiba t135d-s1325. when i plug in usb devices nothing seems to happen. no notification in dmesg. nothing shows up in lsusb.the only things that show up are the built in camera and sd card reader.here's the output from uname -a...Linux linux-9vu9.site 2.6.34.7-0.7-default #1 SMP 2010-12-13 11:13:53 +0100 x86_64 x86_64 x86_64 GNU/Linuxhere's the end of dmesg right after plugging in an ftdi usb-serial adapter and a usb cdr/w
dmesg | tail -n 40 -
[23961.300805] LPS Enter: notify AP we are dozing ++++++++++ SendNullFunctionData
[24077.926538] LPS leave: notify AP we are awaked ++++++++++ SendNullFunctionData
[code]....
View 1 Replies
ADVERTISEMENT
Feb 2, 2010
I can't see any of my devices showing up in network manager to configure even though they're using dhcp and working. How do I get them in so I can configure a proxy?
View 3 Replies
View Related
Feb 1, 2010
I went to see if the iPhone was connected and it wasn't listed--and she was now on my wireless network, on the Internet. For the past month, I have experienced slow Internet (the Qwest people came over three times to fix the problem, to no avail.) And, when my laptop and desktop are turned off, the modem still shows activity, as if someone was downloading large files. Qwest insists that my network is secure and no one is using my network (and my house was built in 1997, so the wiring is fairly new and I have had NO issues with Internet/phone and had Qwest service longer than I can remember).
To make a long story short, I am concerned that my router has been hacked. I live in a rural area, so there's no teenagers or weird-o's around that I know of that would do that (unlike city/suburban areas)--and my Linksys router is "lying" to me, as my nephew was ON MY NETWORK and the SSID, MAC address and IP number was not listed on the LAN device list--only my laptop/desktop are listed, and she was happily checking emails on my network. I have changed my WPA2 password three times just in case, no fix.
View 9 Replies
View Related
Jan 16, 2011
This is probably me looking but not seeing an option somewhere. I re-installed 10.10 over 10.04 by formatting the root partition but keeping the home partition the same, to save me a lot of work. (64 bit) However, now when I mount a CD, DVD or USB stick, they don't appear in Dophin's "Places" window. What have I missed please?
View 2 Replies
View Related
Nov 17, 2010
As the title says the machine name is not showing up in the attached devices list on my router. Is there a file where I need to add the name? Or is this an issue with the router? The router finds all the other machine names on the network except my 3 servers.
Ubuntu Server 10.04 Lts
Ubuntu Server 10.10 Lts
View 3 Replies
View Related
Aug 11, 2011
I have a embedded computer running 10.3 (stuck with that version) that has USB device issues. In reality, it has two USB devices attached, both FTDI FT232 USB to Serial Uart driven hardware. Both usually are at /dev/ttyUSB0 and 1 when everything goes right. The latest FTDI driver is already in the kernel. Randomly however, when it boots one or both will be missing in dev. If we only leave one physically attached before booting, sometimes it comes up ok, the other times there's no listing in /dev/ or lsusb. But when we do run lsusb once and watch the system log, suddenly the device is found and 'attached'. Then it works fine.
I've repeated this with another test USB device (and old cell phone that gets installed as a ceullar modem) and the same thing can happen. It will randomlyy be missing from lsusb listing till lsusb is run once. IE, run it once, no listing, run it again, then it shows up and the system log saya it was just attached. If we leave both, sometimes one device (Call this one A) is ready to go, but device B is missing. If we unplug B, A dissapears from /dev/ and the system log says A was unpluged. The when we reattach B, both show up in /dev/ and the system log reports two USB devices were attached. running lsusb doesn't fix one or both missing when they are both physically attached.
View 9 Replies
View Related
Dec 9, 2009
Host is x64 openSUSE 11.2
guest is winxp pro
VirtualBox ver 3.0.12
The install and setup of VirtualBox is good and working.
I'm having a perplexing issue with usb devices. I have three usb devices connected to my system - apc battery, sd carder, and a Logitech joystick. All devices work on the host. I can connect the apc and the card reader to the guest and they work perfectly. But not the Logitech joystick. I get this error, same as I've seen in some other threads:
Failed to attach the USB device Logitech Force 3D Pro [0600] to the virtual machine winxp1. Failed to create a proxy device for the USB device. (Error: VERR_READ_ERROR)
under "details" is this:
Result Code: NS_ERROR_FAILURE (0x80004005)
Component: Console
Interface: IConsole {0a51994b-cbc6-4686-94eb-d4e4023280e2}
When I installed I modified my fstb:
Code:
/dev/disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1UA115587-part1 / ext4 noatime,acl,user_xattr 1 1
/dev/disk/by-id/ata-SAMSUNG_SP2004C_S07GJ1UA115587-part2 /home
[Code]....
View 1 Replies
View Related
Feb 14, 2010
openSUSE 11.2 - 2.6.31.12-0.1Possibly related to kernel update, but can't be certain.My USB memory devices show up everywhere as expected, except in any file manager, as root or otherwise.How do I restore access through file manager?
p35s3g: # fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
[code]...
View 9 Replies
View Related
Apr 13, 2010
I have recently mounted my iPod Touch using ifuse, and it works with gtkpod and I'm very pleased about that! However, I'm interested in finding out how openSUSE recognises what devices are mounted? Because the device manager in the task bar doesn't recognise that it's mounted... Dolphin doesn't recognise it and neither does Amarok. Only gtkpod, which is good, but I want other applications to recognise it. Do I need to mount it in a specific location? Currently it's at /mnt/iPhone. Or do I need something in fstab (I'm just guessing here).
View 1 Replies
View Related
Apr 25, 2010
I thought, that "Removable devices" module in KDE system settings supposed to automount removable devices. But when any removable media inserted, absolutely nothing happens.
View 6 Replies
View Related
Apr 27, 2010
Issue is, only way i can browse through the contents of for example a CD, is first opening it thourgh superuser Dolphin, and then i can open it with regular dolphin and konqueror.Same thing with a NTFS windows partition in the PC.I must first open it with superuser dolphin.
View 2 Replies
View Related
Mar 7, 2011
I bought a new notebook HP Presario CQ56 with Linux openSUSE 11.0 Everything works and the Bluetooth device is ON. Also the one in my cellphone. But the one in the PC does not detect any device and ergo cannot configure it.Got Bluetooth Applet 1.8 installed.In #suse and #bluez IRC chats couldn't give me a hand =/
View 5 Replies
View Related
Jul 7, 2010
Will you so kind to tell me how I can organize the whitelist of trusted USB devices and all of other USB shouldn't recognized? I suppose, that I should write some udev rules but my experience too small
View 9 Replies
View Related
Sep 22, 2010
Strange to me that a search only seemed to turn up some partial instructions for enabling detection of new USB devices (not discoverable in a default install) in 11.1 and no later. I assume perhaps incorrectly that things have changed since so attempted the following.
Objective: Discover an HTC G1 phone to use as a modem. So, after the phone is discoverable by SuSE the next step would be to configure the connection.
Current: It seems that this phone is listed in /etc/usb_modeswitch.d/
Attempt: I assumed incorrectly it seems that it should have been sufficient to simply create a file in the /etc/usb_modeswitch.d/ directory with the appropriate TargetVendor and TargetProduct codes as follows
Filename: 0bbr:0c01
Code:
########################################################
# HTC Android G1 Phone
DefaultVendor= 0x0bb4
DefaultProduct=0x0c01
[Code]....
I need the proper way to do this in OpenSuSE 11.3. A bonus would be if someone could verify that after the modem/phone is recognized whether the next step is to configure the device using YAST/modem.
View 9 Replies
View Related
Apr 15, 2011
Trying 11.4. But, confused on package managers and update programs.There are no updates found when I run "online update" from yast. But, KPackageKit says updates are available. Why are the two opensuse update programs showing inconsistencies? Which one do I trust?
View 9 Replies
View Related
Mar 28, 2011
I'm installing 11.4 as a guest under Citrix's XenServer. The only access to a guest's graphical desktop is via VNC.The problem is that I can't achieve runlevel 5 as X can't find any devices. With 11.3 I was able to run Sax2 and add a dummy screen device to Xorg.conf that it created.When Sax2 was removed from 11.4, what was the fall-back for configuring X?
View 5 Replies
View Related
Dec 13, 2009
I came into this strange behavior related to mounting DVDs and/or CDs in SuSE 11.2 : after inserting a DVD intro the DVD unit, and mounting it through the "device notifier" applet, I find the disk mounted in /media under a folder named after the disk label (as expected) BUT ... the folder is in fact padded with blanks after the name found as label for the disk. For ex.: I have a DVD called DVD_ROCK2 The mounting is made in "/media/DVD_ROCK2 " (the folder created at mounting time in /media has 14 characters (if I counted them correctly) instead of the only 8 from the name of the disk This does affect my application "cdcollect", which crashes when it encounters a mounted disk which contains spaces in it's label.
I tried to adjust cdcollect, by modifying it's dources (trying to "trim" the name readed as disk-label, but with no results; anyway I am not good at C#, and even kinda hate this language, so... I'd prefer a solution coming from Linux's point of view: what changed in the mounting system from Suse 11.1 till now ? what can I do to change this way of mounting the disks ?I cannot state this happens with every single one of my DVDs; the ones wich are mounted this way are generally written in the same PC, in older versions of SuSE (11.0 and 11.1). Unfortunatelly, I had an older written disk (way back on SuSE 9.x) which does not behave this way (it is mounted in a folder with the name created exactly as the label is, without the padded spaces).
View 8 Replies
View Related
Jan 11, 2010
I have 3 disks in my PC which are partitioned equally as I use them for Raid 1.The first partition on every disk is a simple ext2 partition for booting. No Raid there. So I mount them as /boot and /boot2 and /boot3. So I can backup my /boot to the other boot directories. That worked for some month and this morning I just want to look if all directories have enough free space left. So I did a df -h and got this:
Code:
Dateisystem Grove Benut Verf Ben% EingehÃĪngt auf
/dev/mapper/system-root
6,0G 301M 5,4G 6% /
udev 1,5G 292K 1,5G 1% /dev
/dev/sdb1 122M 29M 87M 25% /boot
/dev/sdc1 38M 21M 16M 59% /boot2
...
/dev/sda1 122M 29M 87M 25% /boot
As you can see /dev/sda1 and /dev/sdb1 are both mounted on /boot
Here is what mount says:
Code:
/dev/sdb1 on /boot type ext2 (ro,acl,user_xattr)
/dev/sdc1 on /boot2 type ext2 (ro,acl,user_xattr)
...
/dev/sda1 on /boot type ext2 (ro,acl,user_xattr)
This is no Problem for me as I could just remount it correctly, but I would like to know if this problem is known. I did not change anything by now and this PC is a server which is running 24/7, so I can deliver more debugging Information if someone is interested.
View 9 Replies
View Related
Jan 22, 2010
When I reboot, USB keyboard acts just fine for GRUB. Once SUSE begins to boot, I lose the keyboard (numlock light goes off too). Cannot press ESC to watch the boot sequence. Then, at login, there is no mouse or keyboard for about 60 seconds. Then suddenly, they both become active. Why did this start happening?
It has been about a week since my last reboot, so there's been a few config changes and patches, so it's going to be hard to narrow down a culprit. Thought USB configs in /etc/fstab was the problem, but still happening after rolling back changes to a known good config. Re-ran SaX2. Mouse and keyboard look good in the config file. Also, have otherwise healthy USB behavior with thumb drives and in VirtualBox machines. It just acts goofy at boot time.
View 5 Replies
View Related
Nov 9, 2010
I've made a bootable USB with 10.3 live CD. I can boot successfully using a 10.3 live CD as long as the USB stick is not plugged in, but if I try to boot from the USB stick, or from the CD when the USB stick is plugged in, I get "No devices matches MBR identifier: !" where the bit after the colon is 2 spaces followed by the exclamation mark. I've seen this message reported elsewhere but never with a blank for the MBR id.I'm running on a Dell Insprion 9100 with 1.5G RAM.
View 2 Replies
View Related
Jan 5, 2011
i'm using opensuse 11.3... sometimes i listen to a music from videos.. but, when i switch to another console (ctrl+alt+f1-5), music stops.. why? what will happen with other applications (database, etc) that work in a background?
View 6 Replies
View Related
Jan 12, 2010
I've problem to access snmp devices through nat.Some devices I can access others not ...All are the same devices...What I see that I have problems it the device has logical interfaces and I want access with snmp to the logical interface...
View 2 Replies
View Related
Dec 7, 2010
For those of you that prefer open-source solutions, the b43 code to drive BCM432X 802.11n devices has just come to life. It can now scan and associate. Tests for throughput will come soon. These revisions to the driver will be in kernel 2.6.38, thus not in openSUSE until the next release after 11.4.
View 1 Replies
View Related
Feb 19, 2010
Previously, everytime I insert a USB drive it automatically mounts. But now I am getting this error:
"Unable to mount 8.0 GB Media DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
Also, previously my CD/DVD works properly. But now everytime I insert a disk, this is what I get:
"Unable to mount TOSHIBA
DBus error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
By the way, I am using openSUSE 11.1.
View 9 Replies
View Related
Aug 29, 2010
When booting opensuse 11.2 or 11.3 there is automatically created a folder in /media to mount my external usb drive (in /media/disk). The problem I have is that sometimes these folders are not automatically removed when I shut down. On the next time boot this device is mounted at /media/disk-1 or /media/disk-2 which throws off for instance Krusader or Amarok. Also the folders that are not removed seem to have really strong permissions such that I can't even browse into them in Krusader or Dolphin. I have to manually clean the /media folder as super user so that when I reboot, they are in /media/disk. Does anyone know how to ensure that opensuse removes the folder(s) upon shutdown?
View 8 Replies
View Related
Feb 8, 2011
How can I change my audio output (and input) from one device to another?
(Using a Sound Blaster and USB Headphones)
Changing settings in Phonon is a hassle, and it still won't change the sound immediately for the apps... Is there a quick way to just disable one device and enable the other, without having to restart the apps that use them? (For instance, right now Skype and my browser are outputting to headphones and amarok to my speakers - one enabled device that receives everything, bang! output for everything to another device and the first device is having a nap)
I can't see any settings in KMix to facilitate such a change...
what I can do to change sound cards quickly and easily?
I recall doing this in seconds in Ubuntu via their mixer, so would it be similar if I ditched KDE in favor of Gnome??
OpenSuse 11.3 x86_64 KDE 4.4.4
View 3 Replies
View Related
Aug 20, 2009
After a few tribulations, I managed to get VMWare server installed. The only problem is that it will not recognize any usb devices. I installed usb in the virtual machine using the VMWare interface and in preparation for that, I followed the instructions in the tutorial to the letter regarding fstab and the vmx file. Supposedly, at least according to Windows control panel, the usb controllers and interfaces are installed. The VMware web interface says the same thing. However, neither the Device tab on VMWare nor VMware Tools show any usb devices. The usb devices - a printer, removable drive, and magicjack - are all recognized by Linux. How can I get the virtual Windows machine to recognize the devices?
This is crucial since my major use for it is to run the magicjack which is not supported in Linux.
View 6 Replies
View Related
Oct 24, 2010
How to locate usb devices before the process of installation?
View 2 Replies
View Related
May 6, 2011
I want to use old devices names eth0, eth1 etc. instead of default OpenSuSE (11.1)eth_s0_0 etc. There is no firewall, no devices management via NetworkManager, static IP address.
1) to edit /etc/udev/rules.d/70-persistent-net.rules and insert eth0ð1 instead of eth_s0_0 & eth_s0_1
2) To rename /etc/sysconfig/network/ifcfg_eth_s0_0 ( and s0_1) to ifcfg_eth0 and ifcfg_eth1 and then reboot ?
View 6 Replies
View Related
Jul 23, 2011
I am running a java-based music player on two machines, one running 11.2 and the other running 11.3. I wrote the code myself, so I have complete control over it. Both machines have Sun java development kit installed, and both have version 1.6.0. The tracks of a given album are each played by a separate thread. Each thread requests the use of the audio device and plays through it. Under 11.2, the device is then locked for the use of this thread, and once the playing is through the lock on the device is automatically removed and the next thread starts playing its music without difficulty. I have no control over this lock, though. It appears to happen at the OS level, independently of my code.
When the exact same code is running under 11.3 the first thread plays through as before, but then the next thread does not manage to get hold of the audio device. It appears to play but no music is heard. When it finishes and the third thread tries to start, I get a "line unavailable" exception. difference between 11.2 and 11.3 in the locking mechanism of audio devices by an application? Is there anything programmatic I can do to remove the lock myself?
View 2 Replies
View Related
