I have a problem where scp big file over VPN will stalled after few Megabytes are copied. I did some research and someone said it is MTU related, but I can't find a "confirmed" solution for this.
Also, we are developing network programmings over the same network. Should I expect similar "stalled" problem for my socket operations? Or is this only specific for scp/sftp operation?
Recently we have deployed a new server with ubuntu 10.4 64 bit, but I am now scp files to the server, the server is located in a another location the it says scp connect stalled and Idea about this.
View 2 Replies View Relatedi cant get kget to download bit torrent all it says is stalled?
View 9 Replies View RelatedEverytime I download a torrent and ktorrent opens and starts downloading it it always sits at a stalled. What is wrong?
View 9 Replies View RelatedI have a little (well, don't think it's easy to solve) issue - my computer stalled at irqbalance (set up), /etc/init/irqbalance.conf (installing, but hung up).
So, my question is what to do? Should I just push the button for 6 seconds, unplug the power cord, or what? It's been like this for 5 hours, I thought it'd go away, but no. Of course, I'll leave it for night, but there has to be a way out. I don't want to reinstall the whole OS, I have lots of programs (and files, actually, too) in there. So, if you know what's the reason and how to deal with it, please tell me. Thank you. I know there are many geniuses in there. I launched updater yesterday, oct.3, and pushed install button only today.
I am having a heck of a time trying to find directions on networking my two computers together in order to share files. I have two machines running Ubuntu 10.10 Desktop & Netbook remix.
They are both connected to my wireless router to connect to the internet.
I get a SD card. Put in the SD reader. It's empty. I go to my super-important-pictures-to-a-monthly-relatory folder and select all files. Select them for MOVE. Paste them on the SD card. When the move/paste process is finished, i click on the "Eject" button on top of the SD card name. Card's ejected. I can't access the card anymore. I take out the card and put on my other computer. From 300 pictures, there are only 10 available, the remaining ones are there, but with 0bytes and unrecoveable. I panic. I go back to my main computer, my pictures are not there anymore. The pictures were on the Home folder. I panic again. I reset the computer and boot on the LiveCD. I install foremost, scalpel, photorec and about everything till my USB drive complains about being filled up. I run everything and I can't recover my files. I'm in the danger of getting fired. Things like that makes Windows sounds more appealing. When you securely remove a pendrive, things get REALLY pasted there before screwing everything up with a removal.
View 8 Replies View RelatedI have a centos server (5.6) and trying to share files to a mac osx. When the mac is mounting the share the first time in a while it goes really slow to browse the folders. Once it has been done the first time, the browsing goes much faster the second time you browse. If the mac unmount or shutdown for a while and then remount, it is really slow again to browse the shares.
View 1 Replies View RelatedI need to transfer some a large amount of file from my Linux lap-top to my desktop Windows machine. Can I connect the two computers through a simple crossover cable and simply navigate into the Windows machine and move to files manually or if not, what's the best way to do this? I don't want to burn a bunch of disks.
View 2 Replies View RelatedI want to transfer files through ftp on my fedora 13 system. when I type ftp in terminal, it shows an error message "command not found" why?
View 6 Replies View RelatedLet's say I have a directory called dir1. In it, I have these files: A1, A2, A3 belong to user "userA", files B1 and B2 belong to "userB". Both users are in group "groupNO", but the files are in group "groupYES".What I want is this: if someone tries to mount the folder by NFS (or could it be done withSamba?), as userA, they can only see (or read) files A1, A2, A3,as userB, they can only see (or read) files B1 and B2,as a user in groupYES, they can see and open all the files.This is just the principle. If I need to sort them into directories or use another program on the server-side, that's fine with me. I just want the user to just have to mount the folder over the LAN with a user name and password. I'm fairly sure I can do it by SFTP, but, again, I want the client to be able to MOUNT the folder on their local machine over the LAN no to user a special client.Is that possible? Do I need LDAP? (From what I understand, LDAP is separate from the OS-level mounting process, which is not what I want.)
View 1 Replies View RelatedI've setup sharing on ubuntu to my windows 7 PC and it recognizes folders all folders i set to share except on my partitioned 2nd hard drive. I'm thinking its because its password protected, how do i remove this security? it shows the folder but i cannot access it
On my windows 7 it gives me: windows cannot access \usernamemovies check the spelling of the name. otherwise, there might be a problem with your network.
I just installed mediatomb so i can share files from my pc to ps3 when i try to access my slave hdd's i get this error msgs "Error: could not list directory /media/Geimsla 2 : Permission denied"
View 6 Replies View RelatedI have set up our home network with an E2000 Linksys router and we have a wireless printer on this Network 2 windows 7 pc's, 1linux (Ubuntu 10.04), 1 iMac (snow leopard), and 1 Windows Xp pc.
This might be an easy question or a tricky one but if anyone knows how to make it so that we can share files between computers and also so that they can all access the printer on the network.
So far the only ones that can see each other on the network are the Windows pc's but i am still having trouble even making it so that the Windows pc's can share files.
My system reports it successfully connected to the VPN at my workplace (pptp / windows server). So I had to enter my username and password in the VPN configuration screen, etc. My machine has Ubuntu 10.04. I tried to find out how to open the files on the server. In windows, after opening the vpn I would go to this location in the file manager:
\company-fs1UsersJulian_b
This would show me the files I am looking for. In the linux terminal, and the Nautilus file manager, these locations do not exist. I tried using mount.cifs to mount this location and it didn't work. (fails with these messages : mounting the DFS root for a particular server not implemented yet no ip address specified and hostname not found). How do I get to these files on the Windows share?
i would like to set up file sharing from one ubuntu pc to another wireless laptop.I found samba on the internet i installed it and i can share files but it's slow a 700mb avi file was going to take 2 hours and from what i read samba is for sharing files from linux to windows.I also found ssh that to is slow also i think it goes over the internet or something like that.So is there any other way to share files that's faster or have i forgot something.I only have 2 ubuntu 10.04 computers and 1 open solaris but the open solaris i will not be putting on the network.
View 9 Replies View Relatedi want to copy files from a local ubuntu 10.04 machine to a remote XP machine on a LAN.using gnome terminal server client i'm able to copy text but not files!is this possible to achieve with terminal server client or do i need to use another program? if so whit and how?
View 2 Replies View RelatedWhile copying a large amount of data between two linux computers I noticed strange behaviour. The network card activity (computer copying the files) would be dormant for 30 second to a minute and then flash rapidly for just 5 second or so. This repeated for the duration of the copying progress (approx 2 hours at a supposedly constant 5-7MB/s).
The share that I was copying to was via SSH using "connect to server" from the GNOME menu. I was expecting the see the network card activity light constantly flash. I wondered if someone could explain this strange behaviour that I have witnessed.
I currently have two computers (one windows one linux) connected to each other via a crossover ethernet cable. Now, each computer can see each other and I can ping both ways. Also, I can ssh into the linux box from windows (putty, cygwin) as well as ssh into my windows machine from the linux box. Here's the problem: I can send files from my linux machine to my windows machine with no problems doing this:
scp this_file.txt windows_user@10.10.10.11:/cygdrive/c
however, I can't seem to send from windows (cygwin) to the linux machine. Here is what I see at cygwin x-term prompt:
$ scp that_file.txt jqweezy@10.10.10.10:/home/jqweezy
jqweezy@10.10.10.10's password:
Executing /etc/profile ...
Now, it seems like everything went fine. However when I look in /home/jqweezy that_file.txt is not there.
p.s. Don't know if this helps, but here is some extra info. Linux machine has only one NIC. Windows has two NICs, one NIC is setup for automatic network detection the other is setup for communication with linux machine via crossover cable (see above).
I have a LAN made up of three dedicated Windows computers and a Windows VM running on my Linux box. All the Windows systems share files and printers and I want my Linux box to be able to do so also.
View 11 Replies View RelatedDoes anyone know how to configure an SSL cert with GoDaddy? On the following squid page it seems to use x509 and PEM format for everything. GoDaddy seems want CSR files to issue the cert. The x509 & PEM combo don't seem to generate these CSR files in the correct format. Does anyone know the openssl commands to generate the files and the config line(s) to put in squid.conf?
I started from this wiki: [URL]
I also tried following this godaddy wiki, but it was for apache and not squid [URL]
I am trying to copy some M$ created files from and to a webdavs system. Files with the type: "unknown", will not copy. I get the following error message: File or folder webdavs: ... does not exist. Do I need to define each of the file types in some way? Is there a way to get that to work without having to define all the "unknown" types? I'm using:
KDE
Dolphin/Konqueror/cadaver (all fail)
i'm trying to create a server certificate to used in PEAP authentication .I have installed freeradius on fedora10, openssl-perl , also upgrade all the packages yum upgrade
Now after changing the configuration of openssl.cnf file placed in /etc/pki/tls/openssl.cnf
I am looking for certs.sh file thats comes with freeradius package. and also CA.all & CA.certs file but i couldn't find these files in filesystem .
Is these files are present by default when freeradius and openssl-perl packages were installed or should i have to install or copy these scripts file as these files are necessary to create a certificate for server side.
I have a speedtouch router, home network . i can share files between 2 windows XP boxes over it ..
Is there a way to share files between fedora 11 , and a specific folder in a windows xp machine ..?
And how can i browse my files in fedora from windows XP .. ?
How do I get it to play movies? It needs all kinds of codecs apparently. Is there a good source for these?I'm running Ubuntu on another machine. How do I connect to THAT?I was able to use samba in Ubuntu to connect to my windows network. Will that work to connect Fedora and Ubuntu?I get this when I try to use sudo in terminal.is not in the sudoers file. This incident will be reported.How do I fix that and how can I log in as root? It won't accept my password even though I know it's right.
View 10 Replies View RelatedI have a saved a .c file on my department computer and i am able to access it through my computer via SSH. BUT I WANT TO copy and paste it into my system.
View 3 Replies View RelatedI installed 14 and no ifcfg- files. (no ifcfg-eth0)can i create them ??
View 6 Replies View RelatedI thought I would try and be clever but have become stuck! I have bought a NEtgear ReadyNAS with a view of copying all sound files and photos to one place. I have a wired home network and a Windows XP PC which I have mapped the NAS to as a network drive.Then came the Linux bit. I have a laptop which I want to do the same with. I have set up the NAS so that it operates with both CIFS and NFS file systems. I can see the CIFS file system in the Network part of Ubuntu 9.10 but am having trouble in getting programs to see it. Ideally I want to use F Spot or Picasa to view the photos and then also use one of the audio packages to play music around the house. When I ask F Spot or Picasa to search for files or folders, the network does not show up in the list.
View 2 Replies View RelatedI have is that I can't update anything at all, my update manager isn't working because I created a few internet files in my /etc/ somewhere so that I could use the internet through a wingate network and now I need to get rid of those files because I'm on a direct connection now. I'm running Intrepid Ibex. .
View 8 Replies View RelatedI cannot, in any way, share files between my Windows 7 and Ubuntu PCs. I have tried everything out there and nothing seems to work. I don't get why! I have samba installed, I have installed the apache2.2 packages and I have checked the network file sharing.
I can create shares with folders and I can see all the windows computers on the network (but can't access any of them).
I cannot view my Ubuntu computer from the Windows computer either.