Networking :: Qmail Not Responding On Public Ip?
Mar 11, 2011I have problem with qmail. From today I can't connect to my server, when I login via ssh on serwe and check
Code:
telnet localhost 110
I can connect but when I try
[code]....
ADVERTISEMENT
Server :: Qmail Error Qmail-inject: Fatal:unalbe To Exec Qq(#4.3.0)?
May 30, 2011while sending mail form squirrer mail it gives erorqmail-inject: fatal:unalbe to exec qq(#4.3.0)iam not able to send mail.i googled but not got solution.
View 2 Replies View RelatedCentOS 5 Server :: Qmail - 5.3 : Qmail-smtpd - Address Already In Use
Aug 16, 2009I had a problem with qmail-smtpd which didn't want to start, throwing a segfault.
Now, it starts but it doesn't live more than 1 sec. I can send emails but can not receive them.
I did a strace:
Server :: When Start Qmail Seervice It Gives Error#/etc/init.d/qmail Start?
Apr 29, 2011when i start qmail seervice it gives error#/etc/init.d/qmail startStarting qmail-toaster:
svscansupervise: fatal: unable to acquire pop3/supervise/lock: temporary failure
supervise: fatal: unable to acquire log/supervise/lock: temporary failure
supervise: fatal: unable to acquire log/supervise/lock: temporary failure
supervise: fatal: unable to acquire pop3-ssl/supervise/lock: temporary failure
Server :: Is A Qmail-ldap Package To Have Ldap Back End For Qmail
Jun 29, 2011I am aware that there is a qmail-ldap package to have ldap back end for qmail. But I need only user authentication for qmail through ldap (not the backend; i.e still keeping Mysql as the database). I am pretty new to mail server configuration. I have just configured a (q)mail server (which is currently my sand box) and am able send and receive emails. I am planning to add ldap authentication (just that) to it. Can anyone point me to the right direction?
View 6 Replies View RelatedNetworking :: Qmail Is Not Sending Mails?
Dec 15, 2008I have installed qmail in centos 5 machine. After the installation , the qmail is not able send mails. The output of the qmailctl stat is
[root@testserver qmail]# qmailctl stat
/service/qmail-send: up (pid 28409) 168066 seconds
/service/qmail-send/log: up (pid 20217) 1 seconds
/service/qmail-smtpd: up (pid 20210) 2 seconds
[code]....
Ubuntu :: Use Openssl Public And Private Keys So Only A Host With The Public Key Could Access / Decrypt The Filesharing
Aug 2, 2011I'm trying to write a p2p file sharing program using python's built-in libraries. Everything is going well. The only thing is that i'd like to be able to use openssl public and private keys so only a host with the public key could access/decrypt the filesharing. I've gotten these libraries (httplib, basehttpserver, ssl, os) to work using just a pem file containing both the public and private keys but no success with them seperately. Can someone point me in the right direction or offer an alternative? PS, the goal of the project is to create an anonymous, decentralized, secure file sharing program. I want to be able to upload this to sourceforge so everyone can use it, if that's any incentive
View 2 Replies View RelatedGeneral :: Mv: Cannot Stat `/public/public/clamscans/*.txt': No Such File Or Directory
Sep 24, 2010I run the following file with the >log.log redirector and it does not capture errors.
#!/bin/bash
echo ************************BEGIN LOG******************************
date +"%m/%d/%Y %H:%M:%S $HOSTNAME"
cp -f /scripts/original/clamscans.log /scripts
[code]....
The following errors show up when I run from the file from the term window, but are not written to log.log:
tar: /public/public/clamscans/*.txt: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
mv: cannot stat `/public/public/clamscans/*.txt': No such file or directory
I know with windows you can add the 2>&1 to capture error data. Is there such a thing for Linux?
Debian Configuration :: Forward Traffic From Public IP To Another Public IP?
Mar 3, 2010How can I forward all traffic from a public IP to another public IP. Let's say I have a first debian box named box1 with eth0 = 1.1.1.1 and eth0:1 = 1.1.1.2 and I want to forward all traffic from 1.1.1.2 to "box2" located somewhere else over the internet and having for eth0 2.2.2.2 Both 1.1.1.0/24 and 3.3.3.0/24 are public IP ranges.
View 1 Replies View RelatedNetworking :: SNMP Not Responding?
Aug 29, 2010I have installed Net-SNMP.It is binded to port udp 161I start it with the command: snmpd -Lo
when I do snmpget -v 1 -c public localhost system.sysObjectID.0on the same machine the snmpd is running on- I get a respond SNMPv2-MIB::sysObjectID.0 = OID: ccitt.1when I send same request from another machine (using SNMPc program) - I see no reaction.I used "wireshark" to monitor packets, and I see the requests sent from the other machine. I also see them get to the first machine.
Ubuntu Networking :: Nfs Lockd Not Responding
Sep 29, 2010I have been using 10.4 as a Linux NFS server to share it's storage with a number of Mac computers we use in the office. All the Macs are configured to connect to the Linux server using the mount_nfs command in terminal.I have been using this method to transfer files to and from the Linux server for a while. Today, I installed a number of standard Ubuntu updates / security patches per the standard GUI update tool.
Now, I'm getting "nfs server 192.x.x.x:/media/video: lockd not responding" error messages. I have not seen this error before, and I haven't changed anything else about the configuration of the Linux server or the Macs with the exception of the installation of the security patches.
Ubuntu Networking :: Internet Not Responding At All
Feb 12, 2011i can only browse some websites with my lucid(10.04), others not responding at all. ping working well but telnet (website) 80 returns nothing for some and works for others!!! i have no problem with my win7. any idea? a virus in my ubuntu? i just used ubuntu software center and sourceforge.jp for my sources and softwares. i checked for iptables rules but there is no block.
View 1 Replies View RelatedNetworking :: Kernel:Nfs Server 10.xx.xx.xx Not Responding
Dec 14, 2009I am getting an var log error while mounting remote file system to the client side as:- Kernel:NFS: Server 10.47.152.70 is not responding, still trying.
The issue is client side machine is getting hang, after i mount the file system.
I have exported the file system as ext3 at the server side using Veritas Cluster. And importing it on the client side by including the shared directory in fstab.
CentOS 5 Networking :: Daemons Is Not Responding
Jun 4, 2009The server is a Dell 1650 1U server, which a fresh install of CentOS 5.3, formatting the drive in the process. It has two e1000 NIC's and based on the wiring eth0 is the public segment and eth1 is the private segment.Both nic's make a solid 100mb connection to the cisco switch, and I can ping both interfaces "just fine".
If I run nmap on a remote PC that is also dual-homed in this fashion, I get the same response as to which ports are open (essentially everything since I disabled iptables temporarily to troubleshoot this issue) on both interfaces, which would be the expected result.But... and here is the source of my confusion... I can see the server by pinging it, I can use SSH to make such a connection and log in, but I cannot get apache to "answer the phone" so to speak.Runing "tcpdump -i eth0" shows me that my browser on a remote PC is attempting to connect, but without reply.If I send my browser to the ip address of eth1, I get the default CentOS new web server page as is the norm.Nothing shows in my /var/log/httpd/access_log or error_log at all... apache simply isn't answering.The httpd.conf is the original, and the one line I attempted to 'adjust' was the "listen 80" line, which I added the ip addresses specifically, but that didn't change anything.I am unsure how nmap can indicate the port is open and there is a service behind it, when on the same PC that ran nmap, I cannot connect at all.Might anyone have a clue to toss me so I can work to figure this out?
Fedora Networking :: LTSP - NFS Server Not Responding?
Feb 12, 2009Currently have a problem with my LTSP server when using a gigabit switch with a megabit thin client.I am using K12LTSP with Fedora 9.The thin clients get most of the way through booting up then I get error messages saying:nfs: server 172.31.6.1 not responding, still trying.I don't get this problem if I use a 100 meg switch though.I have found several forum posts on the internet which all seem to point to the following webpage with a solution:However, when I make the recommended changes It doesnt make a difference.Below is an example of the default file located at /var/lib/tftpboot/ltsp/i386/pxelinux.cfg with its default settings:
Code:
prompt 0
label linux
[code]....
Ubuntu Networking :: Machine Not Responding To Ping?
Jun 3, 2010I am running ubuntu 10.04 on a VMWare Server virtual machine. I have assigned the ubuntu machine an ip address of 192.168.17.101. The ip address of my Windows machine hosting the Ubuntu VM is 192.168.17.100.
From the Ubuntu machine, I can ping all other machines on the local subnet. But when I try to ping the ubuntu machine, it does not get a reply.
I have a clean, plain install and the only software I have installed is Nagios.
Networking :: Host Not Responding To DHCP Request?
May 18, 2009I am running a 2 NIC system with the routing table for eth0 allows user access to the internet,etc. and eth1 routes to another private network (192.168.x.x). eth1 is configured to handle DHCP requests.When a device connected via eth1 boots, it requests an IP from the DHCP server. Using tcpdump, eth1 is receiving the request but is not offering a lease.dhcp.conf seems to be configuring the DHCP service correctly. and dhcpd is running.The host is running Red Hat Enterprise Linux (Server Edition) 5.1. Perhaps I need to modify fire-wall rules (or disable them on eth1 altogether)?
View 2 Replies View RelatedGeneral :: Move The Contents Of /public-back/templates Recursively With Permissions Into /public/templates?
Apr 20, 2011ls -al ../public-back
drwxrwxr-x 4 apache apache 4096 Apr 19 03:32 templates
ls -al ../public-back/templates
drwxrwxr-x 2 apache apache 4096 Apr 19 03:33 content
[code]....
How do I move the contents of /public-back/templates recursively with permissions into /public/templates ?
Fedora Networking :: Server Is Not Responding To The Traceroute Command
Aug 10, 2011As i've installed the new fedora update packets ,i've seemed to develope a strange networking problem .. Network description Fedora 15 with 3 LAN adaptors eth0 > LAN (IP address 192.168.0.254)eth1 > network connected to a pppoe conection eth2 > WAN to another provider. Ok so let's ignore eth2 because i've disable mangle(i was using trafic shifting on some ports). So now i'm using it as a simple NAT server .. so the problem is : >>my server is not responding to the traceroute command is it should .. the network works thou but this is what i get. C:UsersDUAL>tracert google.ro
[Code]...
Ubuntu Networking :: Sudo Modprobe NDISwrapper Not Responding
Apr 4, 2010My current situation is that the command "sudo modprobe ndiswrapper" is not responding, nothing happens. I am using [URL] as my guide and the "sudo modprobe ndiswrapper" is my next step. Here is some general information that you might ask for:
I received ndiswrapper utilities from "Synaptic Package Manager"
I was using jaunty jackelop before hand and the instructions worked perfectly but I decided to update to Karmic Koala 9.10 (I first installed the cloud enterprise version and realized that was way over my head).
Networking :: DHCP For Diskless (PXE) Boot - Server Not Responding
Jan 7, 2009I'm attempting to set up a server for performing diskless boots here. I'm using Gentoo 2008, and have followed the instructions here:
[URL]
I've gotten to the end of the basic DHCP setup, and I can not get the server to issue addresses. I've confirmed dhcpd loads up OK, and is running in top.
Here's the contents of /etc/dhcp/dhcpd:
Code:
# Disable dynamic DNS
ddns-update-style none;
# Assume one default gateway for IP traffic will do
[Code]....
Networking :: Iptables - Site Stops Responding After An Hour?
May 11, 2011My config works fine when enabled but after an hour the site stops responding at all. When I restart, flush or disable iptables it works fine again. Wondered if anyone could see any glaring errors I've made
# Generated by iptables-save v1.3.5 on Tue May 10 17:06:48 2011
*mangle
:PREROUTING ACCEPT [6034:13920296]
[code]...
Ubuntu Networking :: SSH Public Key Denied?
Nov 18, 2010I set up an SSH server on my home machine and finally figured out that I needed to disable password authentication to get RSA authentication enabled. Now I'm having problems with that too.ssh -v -i id_rsa ashtray@x.x.x.83
Code:
OpenSSH_5.1p1 Debian-5, OpenSSL 0.9.8o 01 Jun 2010
debug1: Reading configuration data /etc/ssh/ssh_config
[code]....
Networking :: Connect To Server Without Public IP?
Jul 18, 2011I want to use my personal computer remotely. The problem is my computer is connected to a local network that I can't modify. I can connect from my computer to another one that has public IP via ssh. Is it possible to login to the "proxy" computer from somewhere and somehow use the connection established before to connect to my PC?
View 3 Replies View RelatedNetworking :: How To Do NAT In Iptables (IP Public To Internal IP)
Mar 22, 2010How to do NAT in Iptables? ..I am trying to NAT IP public:Port to Internal IP:Port (202.a.b.c SMTP to 172.16.1.169 SMTP) ..
View 14 Replies View RelatedNetworking :: Ssh To Computers On LAN From A Proxy That Has Public IP?
Apr 13, 2010I have a PC which has a Public IP.It is a webserver but it is not a proxy server.I want to be ableto do an ssh to the machines which are behind this webserver on LAN in one step.Right now I do an SSH to this webserver and then do an SSH to any other machine on my LAN how can I do it in one step.
View 3 Replies View RelatedNetworking :: Can't Get Internet In Public Library?
Jan 14, 2011I just set up my ubuntu 10.10, which boot up by usb drive,
and I found a problem that I can't get my internet when I was
sitting in a public library. The firefox show me every website is
untrust. Normally, when first connect to this network, I need to
accept a library contract on webpage, which called spyder.local.
Does anyone could fix it? or there is something related to the
firefox setting. I currently keep every setting by default
Networking :: Multiple Public IPs With VirtualBox?
Jan 4, 2011I recently purchased a block of 5 IPs from Comcast. I have a computer running Arch Linux connected to the Comcast gateway they gave me. On my connected computer I have 2 Windows XP virtual machines running. Now I was wondering how can I make each of those virtual machines have a different public IP, because currently the only thing I can get working is have the computer and both virtual machines sharing the same public IP.
View 3 Replies View RelatedNetworking :: Multiple Web Servers With One Public Ip?
Feb 16, 2009i am working at a place that has 2 physical web servers yadayada1 and yadayada2 but only one public ip address i can use dyndns to register 2 dynamic domains on the same ip address
how can i get yadayadayada1.dyndns.org to route to yadayada1 and yadayadayada2.dyndns.org to route to yadayada2 ?
Networking :: Nating PUBLIC IP To One Local IP?
Feb 15, 2011I have cent OS 5.5, i am not getting proper command for the same.
View 6 Replies View Related