Fedora Networking :: Server Is Not Responding To The Traceroute Command
Aug 10, 2011
As i've installed the new fedora update packets ,i've seemed to develope a strange networking problem .. Network description Fedora 15 with 3 LAN adaptors eth0 > LAN (IP address 192.168.0.254)eth1 > network connected to a pppoe conection eth2 > WAN to another provider. Ok so let's ignore eth2 because i've disable mangle(i was using trafic shifting on some ports). So now i'm using it as a simple NAT server .. so the problem is : >>my server is not responding to the traceroute command is it should .. the network works thou but this is what i get. C:UsersDUAL>tracert google.ro
[Code]...
View 3 Replies
ADVERTISEMENT
Feb 12, 2009
Currently have a problem with my LTSP server when using a gigabit switch with a megabit thin client.I am using K12LTSP with Fedora 9.The thin clients get most of the way through booting up then I get error messages saying:nfs: server 172.31.6.1 not responding, still trying.I don't get this problem if I use a 100 meg switch though.I have found several forum posts on the internet which all seem to point to the following webpage with a solution:However, when I make the recommended changes It doesnt make a difference.Below is an example of the default file located at /var/lib/tftpboot/ltsp/i386/pxelinux.cfg with its default settings:
Code:
prompt 0
label linux
[code]....
View 5 Replies
View Related
Mar 14, 2011
I am trying to traceroute to google.com
When i do it looks like this
Code:
It does this no matter what site I go to. also the 192.168.16.10 is the untangle server
The command does work for local Ips
Code:
View 2 Replies
View Related
Jul 14, 2010
I've got a machine running Ubuntu Server that is on several VLANs. Each VLAN has its own subnet and the server has an address on each subnet. The switches are set to allow tagged traffic to the server for each VLAN that it is on. Switch ports ending with workstations are given untagged ports on whatever VLAN is appropriate. Workstations are given addresses on a subnet for each VLAN via DHCP. All this works great and hosts on any subnet/VLAN can access the server as normal via its address on that subnet/VLAN.
Accessing the machine by its address on a non-local subnet is where I run into a problem. Inter-subnet traffic has to go through a router, which has been set up appropriately. Running tcpdump on the server and pinging it from a workstation on a subnet, using its address on a different subnet, shows the server receives the ping, but sends no response:
Code:
sudo tcpdump -i vlan4 -n
tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
[code]...
View 8 Replies
View Related
Dec 14, 2009
I am getting an var log error while mounting remote file system to the client side as:- Kernel:NFS: Server 10.47.152.70 is not responding, still trying.
The issue is client side machine is getting hang, after i mount the file system.
I have exported the file system as ext3 at the server side using Veritas Cluster. And importing it on the client side by including the shared directory in fstab.
View 2 Replies
View Related
Jan 7, 2009
I'm attempting to set up a server for performing diskless boots here. I'm using Gentoo 2008, and have followed the instructions here:
[URL]
I've gotten to the end of the basic DHCP setup, and I can not get the server to issue addresses. I've confirmed dhcpd loads up OK, and is running in top.
Here's the contents of /etc/dhcp/dhcpd:
Code:
# Disable dynamic DNS
ddns-update-style none;
# Assume one default gateway for IP traffic will do
[Code]....
View 6 Replies
View Related
Mar 4, 2011
I am bit new to Linux and have setup caching-only name server with Centos 5.5. when i do dig server, it provide resolutions. but when i use the server IP as DNS on my windows client, it says, "connection refused" on the NSlookup output. (IP table didn't enable) My server Ip is 192.168.1.253 and bellow is the configuration of "/var/named/chroot/etc/named.conf"
options {
listen-on port 53 { 127.0.0.1; 192.168.1.253; };
listen-on-v6 port 53 { ::1; };
directory "/var/named";
dump-file "/var/named/data/cache_dump.db";
statistics-file "/var/named/data/named_stats.txt";
memstatistics-file "/var/named/data/named_mem_stats.txt"; .....
View 9 Replies
View Related
Sep 1, 2010
If I traceroute to google, it hits my router and stops there. Generically, my Setup is this. AT&T Uverse residential gateway ---> wired to 54g router running tomato ---> wireless ethernet bridge to 54gl router running tomato in another room ---> wired to ubuntu and win7 box.
The ATT RG hands its external IP over the the 54g running tomato. the 54gl running tomato is a wireless ethernet bride in the den running the same with 2 machines wired to. The two machines are static IP to the first router, which does all DCHP, stuff like that. The Windows box is fine. The subnets are the same. What should I be looking at to figure this out? This is the only "network" issue I have come across.
View 5 Replies
View Related
Jan 8, 2011
how to read a Traceroute readout.
View 14 Replies
View Related
Jun 22, 2010
Why linux traceroute uses UDP protocol, we have basic ICMP protocol which is used in MS-windows tracert.Any specific use of traceroute using with UDP,TCP than ICMP?Windows is displaying all HOPs address but linux printing *.*.*
View 8 Replies
View Related
Jan 25, 2011
When I try traceroute it only gives me stars as output. For example:
Code:
me@desk:/etc/udev/rules.d$ traceroute taobao.com
traceroute to taobao.com (121.14.24.241), 30 hops max, 60 byte packets[code]....
It gives me some output when tracerouting to other computers within my network:
View 2 Replies
View Related
Dec 16, 2010
I've used linuxquestions.org from time to time, but never needed to register until now.An in-depth explanation of this issue is already described over here: [URL], so I will merely quote it again here - it seems nobody knows the solution over at Ubuntu's forums...:
Quote: I recently switched my home server from debian lenny to ubuntu maverick. I've managed to port all my configs and stuff and so far I'm very happy. There's one tiny thing that's griping me, that I never experienced before with debian's (older) packages/configuration... Here's the situation: My server dials up 2 pppoe (adsl) interfaces (different isp's) with split internet routes.
If I run a general traceroute to an internet IP, all the hops which are not routed via the same interface as the destination host/IP, will appear as "* * *" in the traceroute. This was never the case before and it would be preferred to see the IP's of all routers along the way regardless of whether they are routed... (I used to be able to see IP's like 10.0.0.x before through INTERNET traceroutes if they were hops along the way [IP's which would be unreachable if traced directly], and that's no longer the case) - isn't this kinda defeating the point of traceroute?
[Code]...
View 10 Replies
View Related
Feb 15, 2011
I want to give access to a student to a server in order to make repeated trials of traceroute to different hosts. We have realized that it is preferable to use the -T option, as it sends TCP packets that are less commonly blocked by firewalls. However, this option is only available to superusers, and I don't want to grant the student such privileges.
View 2 Replies
View Related
Jan 4, 2010
I am connecting servers using NFS4 the shared directories are on servers running Debian 4 while the one who read from them is Debian 5.0.3. The problem is one of these shared servers suddenly stop responding and you cannot list it from Debian 5 server, also df hang, and the web application that is using it does not respond to requests that use this shared directory since it is blocked. Then the load on the server start to increase until the server cannot respond (over 90). I have found many entries in the syslog that refer to this like:
ma25555 kernel: [1200285.732919] nfs: server 10.xxx.xxx.xxx not responding, still trying
Dec 31 08:16:33 ma25555 kernel: [1200289.815378] INFO: task java:9702 blocked for more than 120 seconds.
Dec 31 08:16:33 ma25555 kernel: [1200289.835249] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
code....
I have tried the connection between the 2 servers using ping for one day and all are OK (zero lost)
There are 3 other servers that are running Debian 4 and are working fine.
View 1 Replies
View Related
Aug 23, 2010
I have problems with nfs. There is an old legato cluster Automated Availability Manager on Linux. And lately we noticed problem with nfs
in the logs there are still entries:
I tried to add more threads in /etc/sysconfig/nfs but it didn't help.
And on one node there is info regarding double mounted filesystems with df -h command. Why? In /etc/fstab is only one entry.
View 1 Replies
View Related
Dec 8, 2010
5.5 (64bit). My server goes into non responding state where I can't telnet, ftp or ssh server whereas PING is the only thing which works at that time. I need to hard reboot server to get it back online. This is happening very frequently in fact yesterday and today server went inaccessible. which log file should I look into to find out the reasons of this inaccessibility?
View 2 Replies
View Related
Mar 30, 2010
I run this script but it hangs at the nail command like it's expecting a response. how to get it to send automatically?
Code:
View 3 Replies
View Related
Feb 25, 2011
i m experiencing some problems connecting via ssh two ubuntu workstation: a ssh client and a ssh server The goal of that is to run from local client computer some X applications on the remote server machine
i have configured both client and server for X11forwarding (i think) properly Infact when i launch xeyes on the client i see the X app running
the problem is for all other X apps. For example when i run xclock, nothing happens on the local PC the prompt continues blinking without any reponse, no windows opens and the strangest thing, the shell is stucked. No possible to interrupt with [CTRL]+c the onyl thing to do is close the shell window
Starting in verbose mode (debug), X11 seems works correct , it says x11 confirm as last message .
View 3 Replies
View Related
Apr 12, 2011
MySQL cluster server refuses to respond.iptables -L shows:
Code:
target prot opt source destination
RH-Firewall-1-INPUT all -- anywhere anywhere
[code]....
View 4 Replies
View Related
Feb 23, 2010
My DNS server used to work flawlessly but for some reason it no longer responds to queries. It seems that named always queries internet root serves!!
View 3 Replies
View Related
Feb 5, 2011
I have a Mac G3 and Squeeze 2.6.32-5-686 on an ethernet wired. Works fine with Lenny kde but only in one direction with squeeze kde4. Mac pings squeeze box ok but response is "server may be down or offline". Squeeze connects to Mac normally. Squeeze installed with server option. How do I enable eth0? I need some direction
View 11 Replies
View Related
Apr 6, 2010
I recently decided to install Ubuntu and I went through all of the steps to set up a subversion server using svnserve. It all works except for one thing: it stops responding to remote computers after a while.I have the server on a 4 port wireless router/switch in my dorm room. I set up port forwarding so that the server receives all traic over the correct ports. The subversion server AND the default http server on Ubuntu work fine always as long as I access them from a computer connected to the switch in my room.The problem is that if I try to access it from anywhere else, it won't respond at all unless it has been accessed by a computer on the switch recently (something like 30-60 minutes). So to fix it I have to go back to my room and access it from a computer on the switch. Then it will work from anywhere for another 30-60 minutes.
View 2 Replies
View Related
Nov 15, 2010
I have deployed proxy server in my office about a month ago. I have about 7-8 client accessing it through port 3128. After some days of deployment, my server started creating problems. Some clients were not able to access proxy while other clients were accessing it. The error message which I found in cache.log was:
Code:
WARNING: Closing client 192.168.2.99 connection due to lifetime timeout
In this way it was disconnecting clients randomly. The problem resolves when I restart proxy server
Im sending my cache.log file
Code:
Last login: Mon Nov 15 12:37:29 2010 from 192.168.2.2
[root@localhost ~]# cat /var/log/squid/cache.log
2010/11/15 08:11:49| storeDirWriteCleanLogs: Starting...
2010/11/15 08:11:49| Finished. Wrote 57740 entries.
[Code]....
View 3 Replies
View Related
Apr 24, 2009
after a update to 5.3 from 5.2 via the built in updater the system stops responding to visitors from the outside, http that is, but heres the odd part, if i say run firefox on the server the connection works also for some reason if i'm on the network with my own computer the connection seems to stay open but as soon as i stop using these the server seems to drop the conenctions, but as i said as soon as i go via my comp to the server via say ie it works right away.
this i tried yesterday:did a cold boot to see if some update had problems and actually needed a reboot even if the updater didn't say, after it started the connection seemed to be open for a good while, and not untill this morning from a outside source the connection is droped again, not been on my comp nor logged on on the server today yet.the install only has on it what i got from the dvd, and as far as i know it has all the updates on it since 5.3 came out.my network is built up like this:
modem
|
firewall-switch-computers
[code]....
View 19 Replies
View Related
Sep 16, 2010
I got this error when opening phpmyadmin, I check that my mysql is keep automatic closed.
#2002 - The server is not responding (or the local MySQL server's socket is not correctly config).
View 5 Replies
View Related
Jan 2, 2011
I am running CentOS 5.2 on a server here in my home. It runs Dovecot and Postfix and also serves as a website host for a small website of mine. Everything works fine. POP, SMTP, Webmail, WWW, all works great and has for ages.Here's the issue. I recently reinstalled a clean copy of Windows 7 on a workstation in my home onto a new harddrive(I still have the old drive int he machine so I can boot to it as well). I setup the Windows Live Mail client to send/receive mail with my mail/web server. However, it won't connect to the POP server on my server machine.Here's the kicker. If I boot to the old harddrive that is running Windows 7, it connects fine to my mailserver and can send/receive just fine. I've checked, rechecked and rechecked and all mail settings on the mail clients on both drives are identical.
Note: The installations of Windows 7 on both drives is identical. Same computer name/ same credentials, same IP, etc. However, as I stated, I can send/receive email with my server if I boot to my old drive, but if I boot to my new drive, I cannot send/receive.
View 2 Replies
View Related
Aug 29, 2010
I have installed Net-SNMP.It is binded to port udp 161I start it with the command: snmpd -Lo
when I do snmpget -v 1 -c public localhost system.sysObjectID.0on the same machine the snmpd is running on- I get a respond SNMPv2-MIB::sysObjectID.0 = OID: ccitt.1when I send same request from another machine (using SNMPc program) - I see no reaction.I used "wireshark" to monitor packets, and I see the requests sent from the other machine. I also see them get to the first machine.
View 1 Replies
View Related
Dec 7, 2010
I am using CentOS 5.5 (64 bit) on a Quad core server having 8 GB RAM. This server has MySQL server 5.1.47 installed. THis server goes non responding state after every 20 to 60 days. SSH, telnet doesn't work at that time however PING works fine. I have to hard reboot the server to get it back on track. Can anybody let me know what logs/files should I look into to find out that what happens to the server when it went to non responding state?
View 4 Replies
View Related
Feb 28, 2010
I've been working on getting NoMachine and FreeNX working together ... and they're both working well, listening on different ports (guess I should write a howto). At some point I decided to write an init script to control FreeNX behaviour (start, stop, status, setup), since the Ubuntu version has one (called freenx-server) and openSUSE doesn't, but I noticed that it was not necessary, as FreeNX got started automatically... but how ? I could not find any init.d script or command which would start the FreeNX server. Indeed it wasn't actually running :
Code:
neelix:~ # /usr/bin/nxserver --status
NX> 100 NXSERVER - Version 3.2.0-73 OS (GPL, using backend: 3.2.0)
[code]....
View 9 Replies
View Related
Sep 29, 2010
I have been using 10.4 as a Linux NFS server to share it's storage with a number of Mac computers we use in the office. All the Macs are configured to connect to the Linux server using the mount_nfs command in terminal.I have been using this method to transfer files to and from the Linux server for a while. Today, I installed a number of standard Ubuntu updates / security patches per the standard GUI update tool.
Now, I'm getting "nfs server 192.x.x.x:/media/video: lockd not responding" error messages. I have not seen this error before, and I haven't changed anything else about the configuration of the Linux server or the Macs with the exception of the installation of the security patches.
View 1 Replies
View Related
