Networking :: Mounting A Samba Share In Debian Squeeze ?
May 12, 2011
I tried the smbmount command like this
And then i get an error instead of my shared files
I assure that the /home/baronobeefdip/share directory exsists and i am using the username and password that exsist on the server's system (the username is baronobeefdip and the password i would like to keep secret)
What am i doing wrong here because something is wrong
And for refernece here is the result from the
I want to the get one that is commented as the "debian floor computer"
I have 2 Ubuntu machines: a desktop in my bedroom, and a laptop.
I have my music shared on my desktop machine, and can access it through the network menu item in the nautilus manager, but I want the files from the share to be mounted on the disk so I can access it through the commandline.
If I right-click the shared folder in Nautilus, it says its location is smb://rob/music
If I do:
mount -t smbfs //rob/music /mnt/music, it tells me that it cant locate rob.
So I try "ping rob" and that doesn't work.
I can't make a hosts entry for rob which happens at this moment to be 192.168.0.8, because my router assigns different IP addresses to various machines at different times, and I cant seem to find a way to make static maps from MAC address to ip address.
So, how come nautilus can see my samba share on the machine "rob", but the mount commands cannot?
I have been searching around but could not find an answer that suits my problem.Here is the line I have in my /etc/fstab//192.168.1.188/openshare /mnt/lacie_nas/openshare cifs errors=remount-ro,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0The remote directory is a LACIE NAS.At boot the directory is not mounted but if I execute the command "mount -a" it works perfectly.
I upgraded my testing/Wheezy Inspiron N5010 to 2.6.38-2-amd64 recently (along with a bunch of other updates, of course) and now my Samba network share is no longer automatically mounting, I have to open a root terminal and do a "mount /mountpoint"; my relevant /etc/fstab entry:
I've tried over options, as well, but it isn't automatically mounting. Any suggestions (including where to file a bug report)?
I'm having some trouble mounting a Samba share on my two Ubuntu machines. The Samba share is setup so that all files are readable and writable by everyone (it's only accessible via the local network). When I create a new folder on the share with either of my Ubuntu machines, the folder becomes non-writable by anyone ie. I can't place anything into the folder. I'm using the following command to mount the share:
I think the problem is with the way I'm mounting the share on my Ubuntu machines. If I go to the share using smb://192.168.1.160 in a file browser, I can create new folders which are readable and writable by everyone. But, if I create the new folder where it's mounted at /mnt/backup, no-one can modify or change it.
I have created a samba share and mounted the share with /etc/fstab on another machine. This share is supposed to be a fully public share i.e. i have different share where different permissions are set but on this particular share i intend to have full read write and execute rights to all the users on my mounting machine.
The problem is that I get only owner and group rights for write on directories that i create due to which all my users can create files in my mount directory but when they create a folder they cannot create any file inside that folder.
I've to make a Windows 2000 share on my Server Linux CentOS 5.1 with all the updates installed with yum. I've a directory on a Windows 2000 that contains some images for a catalogue. I have my internet site on CentOS 5.1 with a Apache - Mysql - PHP web server. I have to mount my directory on a share in /mnt/catalogueimages and made a symbolic link from my /var/www/html/mysite/catimages to this samba share.
This is what I do following your guide a this link: [URL] I have placed in my /etc/fstab this line: //SERVER/C/Catalogue /mnt/catalogueimages cifs user,username=Administrator,password=,uid=apache,gid=apache 0 0 My Windows 2000 server have no password.
After that I made the symbolic link: ln -s /mnt/catalogueimages /var/www/html/mysite/catimages All it's OK.
The problem is that I can't see the images via browser. I have tried also to put some images in the directory /mnt/catalogueimages, deleting the mount point, in order to see if the problem was in apache: the images are visible via browser. Why I don't reach to see the images mounted with samba?
Start>Run>\192.168.0.1storage gives me "The specified network password is not correct." It lists my domain as "ANTEC" which is the name of my computer, though I've changed the workgroup to WELLS. I've run:
I've tried to search online but I can't find anything that works on our netbook. The netbook has a default Squeeze installation. After inserting the microSD card (via a "microSD card adapter" into the built-in slot), when I double-click on "Computer" on the Gnome desktop, it shows "Multiple Card Reader", but I can't access it. fdisk -l doesn't show any new devices, but dmesg does show the following:
[ 2532.101119] usb 1-5: reset high speed USB device using ehci_hcd and address 8 [ 2542.344135] usb 1-5: reset high speed USB device using ehci_hcd and address 8 [ 2558.588138] usb 1-5: reset high speed USB device using ehci_hcd and address 8 [ 2558.836073] usb 1-5: reset high speed USB device using ehci_hcd and address 8
I can't mount /dev/sdb or mount /dev/sdb1 (fdisk only shows "sda1-3"). The system simply reports that "special device sdb does not exist", although during one attempt I did get a message saying "block device sdb (or sdb1) something...".
It's imperative that I can access this microSD card. It will be put into my mobile phone so I can have the Star Trek: The Next Generation theme tune as the ringtone. I'm sure you all - as will all of humanity - realise the importance of this endeavour
just installed squeeze today, all went well but when I put a cdrom or dvd disc in it will not auto mount.. have to manually mount them from terminal. I've looked a /ect/fstab and do not see any problems there. Anyone else run into this problem on a squeeze install and fixed it?
whenever i plug in my flash drive i get an error message saying that it was unable to mount the thumb drive and some other stuff
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdb1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
what do i have to install or configure for this to work we need to be able to mount our thumb drives on this machine it's crucial
I have two remote systems which I have fstab entries for on the local system. I have them set to noauto, because mount fails during boot for some reason, but that's not the problem. For years I've mounted them in rc.local.
The problem is after I recently reinstalled Debian, when I mount them manually it always asks for my user's password. I've copied my user's pub key from the local to the remote system and put it in the user authorized_keys file (not root), like I always have. But it still asks for a password, and so fails to mount in rc.local.
Usually you put external mounts in the /mnt folder, then link there with a symbolic link if you want access from somewhere else. By keeping all of your mounts in /mnt its easier to manage them as your system and ability grow.
You need to make mounts as root. Mounts take the data in the target and put it on top of an existing folder. When you mount something on top of a folder whatever was there becomes invisible until you remove the mount on top of it. If there is a problem with a mount and it does not work, any writes to the mount will go to the folder underneath, and any data you expect to read from there will not exist.
In making a mount you should realize that the char requires an escape char in bash to show up in the final output to the command. The escape char is also . Therefore to show \ in a Windows command, you need to type \\. Also, spaces must be escaped once with .
You should substitute your ip or name for 10.10.9.5
Reminders: Make sure your Windows folder is shared read/write if you need to write to it.
You probably want to change permissions on /mnt/WindowsDocuments to 777
Tips:If you want a link from your desktop to your Windows "My Documents" folder you can now do this:
This will make a symbolic link to /mnt/Windows, and if you execute: ls -l ~/Desktop you should see the links information in the response
Finally, if you want to keep a local backup of what's on the windows box in a local folder you could do:
The ~ char is shorthand for /home/<uername> and represents your home folder.
The result of the rsync command is to make a copy of WindowsDocs (which points to your mount at /mnt/WindowsDocuments which is linked to your Windows machine shared 'My Documents' folder) and put it into ~/WindowsDocumentsBackup
As always, make use of the man command if you get confused or the info command for more detail. ie man rsync
However, autofs does not work: the /msrv directory appears and disappears when I start and stop autofs; but when I enter "cd /msrv" followed by "cd Share05" in the terminal, I get the "bash: cd: /msrv/Share05: No such file or directory" message after the second command.
Following instructions that I received from the Fedora 10 Guide, I recently edited my etc/fstab file so that I could auto mount my Windows share. It worked the first time, but when I rebooted, I noticed an error saying that Linux could not not unmount the cifs shares. Eventually it did reboot, but now I cannot mount the share at all from fstab. When I run the command #mount -a and then #mount, my share is shown to be mounted although I cannot access it and there is no link to it on the desktop like there was the first time it mounted. I basically want my Windows share to be permanently mounted with read/write permissions. My Distro is Fedora Core 10 64 bit. How can I resolve this issue?
I cannot mount my windows share automatically with fstab and have the files be R/W. They are only mounted as read-only.I have tried several dozen commands in the fstab file with many mount points and different users. The share is on a Windows 2000 server, but NOT a domain controller.Thing is, using the Places|Connect To Server|Windows Server menu selection, it works fine. And when I use that, the share shows up on the desktop. However, in some programs I cannot see the share in the open/close dialog boxes. I can however go to /mnt/server to see them if I mount them in fstab. The files just open as "read only" that way however.Have tried... on last line of fstab mount command.....rw option, +777 option, using IP address of server, using server name.
Same result (as fstab) if I do a manual mount command, then a mount -a. Mounts Ok, just as "Read only". ex: sudo mount -t smbfs //192.168.1.xxx/sharename /media/server -o username=xxxxxx,password=xxxxxxxxThis has been the case with Ubuntu 8.04 until my current one, 9.10. Ubuntu (if you are listening) really needs to make this easier. It truly is basic network stuff that for some reason is rather difficult to do. Read only access is not actual network access and my other option (having to manually connect via the drop-down menu) each time I boot up is a pain.What is different about that "connect to server" option on the menu that makes it work? It'd be great if there was a check box there that said "remember this connection". Then all would work fine.
We have a computer here with stuff on it we all use. If I load up my Windows XP VM and open it through My Network Places it loads up just fine. In Ubuntu Nautilus complains that it cant mount the share. If I do:
I have a network PC running Win7 that u use for storage of all my media; movies, music and pictures.I can connect and use the share just fine using the "connect to server" option under places menu.I think i need to modify the fstab file but I am not familiar enough with it to do this.Have searched other threads for help but I am doing something wrong.HP Laptop running Ubuntu 10.10 connecting to a win7 share through a router.
We have a Windows server at work that has several shared directories. For whatever reason the lab administrator has required clear-text passwords for it. There is a registry tweak for Windows boxes. Nautilus can't mount shares because it is trying to use an ecrypted password. Ironically enough the Windows VM I have running in Virtual Box can mount the shares.... smbclient can see the server and shares if I specify a clear-text password option.
A very strange thing happened to me today after upgrading a Lenny server to Squeeze. All seems to be working great except for the fact that I cannot join the server to our domain (made a work copy of the virtual machine holding Debian, upgraded that, renamed and changed IP).
The problem I'm having is related to Samba as far as I can tell. On the Lenny server(s) I have the 'net' command to join a server to a domain but not on the upgraded version (Squeeze). It just says command not found and there's indeed no 'net' in /usr/bin where it's supposed to be.
I imagine that something went wrong upgrading Samba although the rest works, the daemons are running, kerberos works (kinit, klist), and so on, I only miss the net command.
Is there a way to install that separately or which package do I have to reinstall (samba-common, sambafs, ...)?
I have other servers (clean install and upgrade from Lenny to Squeeze) that do have the command in /usr/bin. Can I just copy it over from one to another or do I have to remove and reinstall Samba all together?
Does anyone have any good articles on mounting a Ubuntu volume as an iSCSI share on a windows box? Originally I was just going to use a SAMBA share but it turns out samba has issues with my lan security. So I thought since all I really want to do is create the share on my backup server that an iSCSI device would do. Been using the following article with limited success... [URL]
So my brother has a home network that is setup with multiple workgroups (don't ask why - I have no idea and he refuses to change it). Anyways I just installed Mint 9 (Ubuntu 10.04) on my mother's computer and I need it to be able to access the fileserver in her house where her data is stored. The Mint system is part of the default workgroup and can only see one other system in this workgroup.
The workgroup the file server is a part of is called "hobnw", the server's name is "fileserver", and the share I want to connect to is called "TV Shows" How can I connect to this network share on Linux? (I also know the username and password) When I browse the network under nautilus all I see is the default workgroup and no others. All of the Windows systems on the network (Windows XP, Vista, and Win7) all see and can access the file server without issues.
I have a Debian 5.0 system, fresh install, updated with aptitude. Now i'm using vmware to test my system, but the 'real' system, is a small network with around 30 workstations connected in a cisco switch + router. So i test the configuration at home, and when it's working and done, i will copy it to the real network, because i don't want to mess it up
So i installed the newest samba to act as a PDC. You can read my configuration in the following lines:
I added root with 'smbpasswd -a root' command. When I try to connect to the domain with a Windows XP, it says: ' The username cannot be found '
"My network" is behind a firewall inside a larger windows network with AD. My network has a Debian Server with samba 3.2 running. There are 50 users on my server. Users has accounts on the win-server, but is only using this to read mail. How do I mount a windows share on my Debian server in a way that all my users can read and write there?
I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
I've mucked through and figured out how to mount a windows share. I can access the folders I was looking for, but the windows share was not what I thought it would be. I was looking for the specific shared folder. Instead I got a root level parent directory that included the folder I wanted, and a couple others.
smbclient -L <ipaddress> gives me a parent directory on the root
First question: Can I mount a specific folder within a share? Second question: Could somebody define share? I thought it was the specific shared folder, but that doesn't seem to be the case.
A few days ago I got this Ubuntu box (9.10) to connect to the Windows network in our house. Sharing printers and files. Life was good. But today, Places > Network > Workgroup tries to connect for about a minute then I get a "Unable to mount locations, Failed to retrieve share list from server" error. The only thing I recall changing at around the same time was adding Wine.