Does anyone have any good articles on mounting a Ubuntu volume as an iSCSI share on a windows box? Originally I was just going to use a SAMBA share but it turns out samba has issues with my lan security. So I thought since all I really want to do is create the share on my backup server that an iSCSI device would do. Been using the following article with limited success... [URL]
View 2 RepliesI cannot mount my windows share automatically with fstab and have the files be R/W. They are only mounted as read-only.I have tried several dozen commands in the fstab file with many mount points and different users. The share is on a Windows 2000 server, but NOT a domain controller.Thing is, using the Places|Connect To Server|Windows Server menu selection, it works fine. And when I use that, the share shows up on the desktop. However, in some programs I cannot see the share in the open/close dialog boxes. I can however go to /mnt/server to see them if I mount them in fstab. The files just open as "read only" that way however.Have tried... on last line of fstab mount command.....rw option, +777 option, using IP address of server, using server name.
Same result (as fstab) if I do a manual mount command, then a mount -a. Mounts Ok, just as "Read only".
ex: sudo mount -t smbfs //192.168.1.xxx/sharename /media/server -o username=xxxxxx,password=xxxxxxxxThis has been the case with Ubuntu 8.04 until my current one, 9.10. Ubuntu (if you are listening) really needs to make this easier. It truly is basic network stuff that for some reason is rather difficult to do. Read only access is not actual network access and my other option (having to manually connect via the drop-down menu) each time I boot up is a pain.What is different about that "connect to server" option on the menu that makes it work? It'd be great if there was a check box there that said "remember this connection". Then all would work fine.
We have a computer here with stuff on it we all use. If I load up my Windows XP VM and open it through My Network Places it loads up just fine. In Ubuntu Nautilus complains that it cant mount the share. If I do:
sudo mount -t cifs //tech1/e /mnt/tech1
it asks for a password. There is no password.
I have a network PC running Win7 that u use for storage of all my media; movies, music and pictures.I can connect and use the share just fine using the "connect to server" option under places menu.I think i need to modify the fstab file but I am not familiar enough with it to do this.Have searched other threads for help but I am doing something wrong.HP Laptop running Ubuntu 10.10 connecting to a win7 share through a router.
View 9 Replies View RelatedUsually you put external mounts in the /mnt folder, then link there with a symbolic link if you want access from somewhere else. By keeping all of your mounts in /mnt its easier to manage them as your system and ability grow.
You need to make mounts as root. Mounts take the data in the target and put it on top of an existing folder. When you mount something on top of a folder whatever was there becomes invisible until you remove the mount on top of it. If there is a problem with a mount and it does not work, any writes to the mount will go to the folder underneath, and any data you expect to read from there will not exist.
In making a mount you should realize that the char requires an escape char in bash to show up in the final output to the command. The escape char is also . Therefore to show \ in a Windows command, you need to type \\. Also, spaces must be escaped once with .
Howto:
You should substitute your ip or name for 10.10.9.5
Reminders: Make sure your Windows folder is shared read/write if you need to write to it.
You probably want to change permissions on /mnt/WindowsDocuments to 777
Tips:If you want a link from your desktop to your Windows "My Documents" folder you can now do this:
$cd ~/Desktop ln -s /mnt/WindowsDocuments WindowsDocs
This will make a symbolic link to /mnt/Windows, and if you execute: ls -l ~/Desktop you should see the links information in the response
Finally, if you want to keep a local backup of what's on the windows box in a local folder you could do:
The ~ char is shorthand for /home/<uername> and represents your home folder.
The result of the rsync command is to make a copy of WindowsDocs (which points to your mount at /mnt/WindowsDocuments which is linked to your Windows machine shared 'My Documents' folder) and put it into ~/WindowsDocumentsBackup
As always, make use of the man command if you get confused or the info command for more detail. ie man rsync
Following instructions that I received from the Fedora 10 Guide, I recently edited my etc/fstab file so that I could auto mount my Windows share. It worked the first time, but when I rebooted, I noticed an error saying that Linux could not not unmount the cifs shares. Eventually it did reboot, but now I cannot mount the share at all from fstab. When I run the command #mount -a and then #mount, my share is shown to be mounted although I cannot access it and there is no link to it on the desktop like there was the first time it mounted. I basically want my Windows share to be permanently mounted with read/write permissions. My Distro is Fedora Core 10 64 bit. How can I resolve this issue?
View 3 Replies View RelatedWe have a Windows server at work that has several shared directories. For whatever reason the lab administrator has required clear-text passwords for it. There is a registry tweak for Windows boxes. Nautilus can't mount shares because it is trying to use an ecrypted password. Ironically enough the Windows VM I have running in Virtual Box can mount the shares.... smbclient can see the server and shares if I specify a clear-text password option.
View 1 Replies View RelatedI've mucked through and figured out how to mount a windows share. I can access the folders I was looking for, but the windows share was not what I thought it would be. I was looking for the specific shared folder. Instead I got a root level parent directory that included the folder I wanted, and a couple others.
smbclient -L <ipaddress> gives me a parent directory on the root
First question: Can I mount a specific folder within a share?
Second question: Could somebody define share? I thought it was the specific shared folder, but that doesn't seem to be the case.
A few days ago I got this Ubuntu box (9.10) to connect to the Windows network in our house. Sharing printers and files. Life was good. But today, Places > Network > Workgroup tries to connect for about a minute then I get a "Unable to mount locations, Failed to retrieve share list from server" error. The only thing I recall changing at around the same time was adding Wine.
View 6 Replies View RelatedI am attempting to mount an NFS share that has been setup on a Windows Storage Server 2008 (R1). Initially, I could not even mount the share, though it would show up using "showmount -e <server_ip>". After adding the "ANONYMOUS LOGON" user to the NTFS permissions and granting the "Full Control" permission, I was able to successfully mount the share and read from it. However, I cannot write to it. The NFS share is set to allow anonymous access, UID 0 and GID 0. The appropriate host is listed in the NFS Share Permissions with Read-Write permissions, and ANSI encoding. Root access has also been allowed. I also tried granting the "Everyone" user full control in the NTFS permissions as well. See screenshots and console quote for clarification if needed.
View 1 Replies View RelatedIn Nautilus, I can find the share under Network which I want to mount. When I double-click on the desired folder, I was prompted for a username, domain and password. However, I could not log in; there was no error messages, but Nautilus kept prompting me for my username etc..It would seem like I've entered the wrong details, but I've used a Mac OS to access the share using the same wired network and I had no problems doing so.So what could be the problem? Am I missing some setting? Or is the Windows share setting denying access to Linux systems?
View 9 Replies View RelatedI have been looking into how to get Nautilus to emulate the windows "map network drive" feature.
I have found several howto's that use various command line utilities to try to do this, however they tend to be like trying to use a sledgehammer to fix small dents.
When I connect to a share server, Nautilus puts a directory on my desktop that only Nautilus seems to be able to see and use. I would like to be able to access this directory with non-Nautilus applications.
Mounting Windows XP Share for back up.
View 1 Replies View RelatedI'm trying to automatically mount a windows share in a Fedora 12 instance (FC12).When I manually mount things work:mount -t cifs //nas01/servers -o username=guest,password=myPassword /mnt/nas01/serversIf I update /etc/fstab with the following://nas01/servers /mnt/nas01/servers cifs username=guest,password=myPassword 0 0Nothing happens after reboot. The thing that has me baffled is after a reboot if I run:mount -aThe share is mounted.
View 3 Replies View RelatedI have an iSCSI device that is large, ~17TB usable, and I've created an XFS file system at the device level. I mount the device no problem and am able to touch and remove files without issue. I start my application and within about 5-10 minutes I start seeing the following entries appear in /var/log/messages
[Code]...
I want to setup a SSL encrypted WebDAV share on my OpenSUSE 11.4 server that is accessible from the internet. Everything is working fine when using Windows XP or Linux clients, but a connection with Windows 7 is not possible ("the selected folder is not valid").
I already searched for a solution to this problem I tried several setups:
- with and without encryption
- with Basic authentication
- with Digest authentication
- without authentication
I did not have success so far. Is there any solution to this (except not using Windows 7)? Or can anyone confirm that this should be working (and maybe my configuration is messed up)?
I'm trying to mount a Windows Server 2003 share in Fedora 13. With Fedora 8 and with RHEL 5.5 this works properly, but not with Fedora 13.
The mount point I'm using is /usr/eg
The symptoms are: Nautilus (the file browser) does not display the mount in the places or tree as a mounted drive. Using the file broser I can browse under file system down to the files on the server Programs cannot find the files under /usr/eg ie the files on the server.
Here is my fstab entry:
//192.168.1.40/eg /usr/eg cifs auto,user=<user>,password=<password>,rw,uid=500,gid=500,file_mode=0774._netdev 0 0
I am having issues mounting a share on a Windows 2008 Server from all of our Redhat 4 machines. I am trying to back up files before wiping and upgrading them to 5. I will try and post as much information that I gathered after trying different things. I am a newer hire for this network and a Linux newbie.
The scenario is this:
1. Windows 2008 Active Directory.
2. Redhat Enterprise 4 machines
I have root access and I tried entering at the terminal:
" smbclient -L "servername" -U "username"
get the "password" prompt I enter my password and get:
"session setup failed: NT_STATUS_ACCOUNT_LOCKED_OUT."
I check event viewer on the 2008 box and last week was seeing:
Event ID: 4625
Keywords: Audit Failure
etc, etc
"Account for which Logon failed:
Security ID: NULL SID
Account name: anonymous
Account Domain:MYGROUP
Failure Information:
Failure Reason: Uknown user name or bad password
etc, etc
Now the last couple of days the audit failures have not shown up on the 2008 Server box even though I attempted to log in.
The end users used to just use Konquerer smb://"servername"/"share" and it worked but for some reason starting last week this no longer works. Nothing was changed that I know of, this network is in a sealed classified environment with no external access. All additions to the network are monitored and no unapproved software is installed. The lab is in a vault type environment and only a few people know the combination and alarm pass codes so no chance of somebody adding stuff without me knowing it.
I would think with the locked out message it was an issue with my user account but that works fine on the Windows side so I tried my Linux credentials with no success when trying to mount the directory.
Is there something anybody can suggest Linux or Windows side to check? No user accounts work connecting to the Windows share.
p.s. I am aware the above command is only to see the Windows shares but i get the same thing when I just try and mount using CIFS or SMBFS.
I am having permissions errors every time I try to mount a windows host. I have a linux server and all the windows computers can see that computer and its files, but we wanted to start backing up the linux machine to one of our other computers. so I tried to mount one of the computers. here is the sequence of events:
Code:
$mount -t cifs //192.168.1.194/Admin$ /mnt/Anita-comp
password: (I have no password so I left it blank)
Mount error (13): Permission Denied
I tried all sorts of passwords we use around the office and none of them worked.
I then decided to try mounting one of our other computers. this one looked like it worked fine. no error messages at all. (I left password blank) so I look in my filesystem and the mounted drive is not in the /mnt/Anita-comp file. What gives?
I am trying to connect the one of server RHEL5.4 to the IBM iSCSI storage. Server is equipped with 2 single port Qlogic iSCSI HBA(TOE). RHEL detected the HBA and installed driver itself (qla3XXX). I have configured the HBA ip address in the range of iSCSI host port of storage. Both of the HBA is connecting to the two different controller of storage. I have discovered the storage using command iscsiadm -m discovery command for both of the controller and it went through fine. But problem is whenever server is restarting if both of the hba is connected to the storage then server will not detect the volumes which is mapped to the server and then to detect the volume I need to run "mppBusRescan" and "vgscan" command each time. If only one path is connected it is fine.
View 1 Replies View RelatedI have a server, with a static IP of 192.168.1.17, that is running Ubuntu lucid sever edition and that exports some shares per NFS. Here is its /etc/exports:
Code:
/media/Share00 192.168.1.0/255.255.255.0(rw,nohide,insecure,no_subtree_check,async)
/media/Share01 192.168.1.0/255.255.255.0(rw,nohide,insecure,no_subtree_check,async)
/media/Share02 192.168.1.0/255.255.255.0(rw,nohide,insecure,no_subtree_check,async)
/media/Share03 192.168.1.0/255.255.255.0(rw,nohide,insecure,no_subtree_check,async)
[Code]....
However, autofs does not work: the /msrv directory appears and disappears when I start and stop autofs; but when I enter "cd /msrv" followed by "cd Share05" in the terminal, I get the "bash: cd: /msrv/Share05: No such file or directory" message after the second command.
I have 2 Ubuntu machines: a desktop in my bedroom, and a laptop.
I have my music shared on my desktop machine, and can access it through the network menu item in the nautilus manager, but I want the files from the share to be mounted on the disk so I can access it through the commandline.
If I right-click the shared folder in Nautilus, it says its location is smb://rob/music
If I do:
mount -t smbfs //rob/music /mnt/music, it tells me that it cant locate rob.
So I try "ping rob" and that doesn't work.
I can't make a hosts entry for rob which happens at this moment to be 192.168.0.8, because my router assigns different IP addresses to various machines at different times, and I cant seem to find a way to make static maps from MAC address to ip address.
So, how come nautilus can see my samba share on the machine "rob", but the mount commands cannot?
I have been searching around but could not find an answer that suits my problem.Here is the line I have in my /etc/fstab//192.168.1.188/openshare /mnt/lacie_nas/openshare cifs errors=remount-ro,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0The remote directory is a LACIE NAS.At boot the directory is not mounted but if I execute the command "mount -a" it works perfectly.
View 4 Replies View RelatedI have a security camera (Mobotix M12) which can save video to a Samba share, but it's unable to mount the share. So from another system I am trying to mount that share and it's failing.
The problem is not firewall, as no problem messages, and the Samba log is vacant.
When using this command, and I give the password:
In dmesg on the client I get:
And on the server I get nothing in dmesg or samba logs. And no logfile is created for the client machine in /var/log/samba. I can ssh over to driveway on the server just fine.
I used to use Samba, although it's been a long time, since I discovered sshfs.
I tried the smbmount command like this
Code:
And then i get an error instead of my shared files
Code:
I assure that the /home/baronobeefdip/share directory exsists and i am using the username and password that exsist on the server's system (the username is baronobeefdip and the password i would like to keep secret)
What am i doing wrong here because something is wrong
And for refernece here is the result from the
Code:
command
Code:
I want to the get one that is commented as the "debian floor computer"
I'm having some trouble mounting a Samba share on my two Ubuntu machines. The Samba share is setup so that all files are readable and writable by everyone (it's only accessible via the local network). When I create a new folder on the share with either of my Ubuntu machines, the folder becomes non-writable by anyone ie. I can't place anything into the folder. I'm using the following command to mount the share:
[Code].....
I think the problem is with the way I'm mounting the share on my Ubuntu machines. If I go to the share using smb://192.168.1.160 in a file browser, I can create new folders which are readable and writable by everyone. But, if I create the new folder where it's mounted at /mnt/backup, no-one can modify or change it.
I have never done this before but stood up a new Debian (testing) x64 system. It only has 146GB available for RAID1 so I created a 500GB iSCSI LUN on my NAS device on the network and am really confused how I can attach my Debian to the iSCSI LUN I created. Right now the OS is installed all locally on the machine but I would like the iSCSI LUN to be the /home directory for mail storage. Is this possible or do I need to mount the LUN to a newly created folder / mount point that is locally attached?
View 1 Replies View RelatedI'm trying to mount a Windows Server share from Centos 5.5 (kernel 2.6.18-194.26.1.el5). I've tried two approaches neither of which work.
1). Using Places->Connect To Server. This approach works fine on Ubuntu but not at all for Centos. Using the 'Windows Share' Service type, it allows me to see the remote directory - I can see all of the directories on the server. But as soon as I click one, I get an error 'Couldn't find "smb://blah/blah". Please check the spelling and try again. As I say, this worked fine on ubuntu. Tried loads of options but with no luck. I saw something on the web about leading slashes being a problem.
2). Using Mount . Tried to use mount to mount as a cifs filesystem, as documented on a number of web pages:
mount -t cifs //server/dir -o username=username,password=password /mnt/tmp
This completely hangs the machine.I means completely, no mouse, no nothing. I've seen some references to unstable cifs on the web but I believe that this kernel has the fix for this.
I have installed ubuntu 10.10 and the Samba addon to configure my shares to my Windows terminals.This is what I got
Firewall off (utf disabled)
Internal Sata /dev/sda1 (EXT4 FS)
External USB HDD /dev/sdb1 mounted at /media/SG1500GB (EXT4 FS)
I have two shares
1. //home/test - Which I can see and access with no problems (can't write to it though even though I set the share as writable?, but, I can read from it). This is available to everyone. My windows terminal can see this folder and access it. This is on my main 80GB internal drive /dev/sda1.
2. //media/SG1500GB/Music. I set this up for everyone full access and I can see it at all my Windows machines but,I can't get into the folder. Windows keeps giving me an error stating network path not found.I also try to access it via the Nautilus (Places/Network/system/music) and get an error message "unable to mount location, Failed to mount windows share". This drive is mounted per the disk utility.
I am trying to configure MPD (music player daemon) to work on my headless ubuntu server. Everything works well, but MPD cannot see the music files stored on my windows XP main computer. These files are stored at smb://LASTNAME/share/music Is there a way to directly mount this drive, so it is accessible at something like /mnt/music, in order that they work with MPD?
View 8 Replies View Related