Networking :: How To Install Intel 82573E Gigabit On Centos 5
Mar 30, 2011how to install intel 82573E gigabit on centos 5
View 2 Replies
ADVERTISEMENT
Fedora Networking :: Intel Gigabit Card Only Connects At 100Mbps
Jan 24, 2009I recently swapped out my old network switch (10/100) for a Netgear GS105 gigabit switch. With the exception of my Fedora 10 laptop all the rest successfully connect at gigabit speeds. But my laptop (with an Intel Corporation 82566MM Gigabit Network Connection (rev 03)) will only connect at 100Mbps. If I look in the logs for my network card here is what I get:
e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
e1000e: Copyright (c) 1999-2008 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:7e:46:e6:a3
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 5, PHY: 6, PBA No: ffffff-0ff
0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
0000:00:19.0: eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
What I can try to bring it up to gigabit speeds?
Networking :: Wits END - Can't Configure Intel 82577LM Gigabit On Dell E6410
Oct 30, 2010Ive been trying everything possible, and cant get this Intel card to connect. Here are the details Centos 5.5 Kernel 2.6.18-194.el5 Intel 82577LM Gigabit on dell laptop e6410 Broadband router with gateway 10.54.7.1 My network is 10.54.7.* linux sees the exact card in the configuration utility. If I choose dhcp, and try to bring up teh device, I get "no network, cable unplugged?" error If I configure static ip for eth0 like
10.54.7.2
255.255.0.0
gw 10.54.7.1
The interface will come up (seen in ifconfig) but cant ping the gateway. At one point it did work... I just cant get it back - Ive reinstalled like 4 times... in hopes Id catch something different, no luck. My network serices about 10 pcs many of them centos linux - no problem using static or dhcp with my router- I just got this new laptop and cant get ths card to work.
Ubuntu Networking :: Slow File Transfers (FTP, SCP) With Intel Gigabit Or Atheros WLAN?
Nov 16, 2010I just installed ubuntu as my primary OS, but I have the disk with XP on it and I don't want to go back, but I need faster network connectivity. I have a T60p with Intel Gigabit jacked into my Gigabit router which also has my desktop (running XP) and my NAS. If I FTP files from my NAS (or SCP), I get transfer speeds around 250-500 KB/s (which is not very fast). On this same switch, from my XP desktop I get transfer speeds around 12 MB/s. I get the same speeds using my 802.11n card (Atheros) as with the ethernet NIC (250-500 KB/s).The drivers for the ethernet card and the atheros card are e1000e and ath9k respectively.I have disabled IPv6. Since the problem occurs using either interface, I am just going to concentrate on fixing it for the Ethernet interface (since I believe it to be a systemwide problem).
Code:
skinnersbane@albert:~$ sudo ethtool eth0
Settings for eth0:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
[code]....
Clearly my card is running at Gigabit, but why the bad transfer speeds? I am using filezilla for FTP (technically FTPES). I closed every other program. My CPU utilization does seem high and I wonder if this is part of the problem. I had no problems with throughput using either interface in Windows XP just one week ago.
Networking :: Ethernet Intel Gigabit Controller Is Broken Or That Atheros Driver Is Missing?
Apr 21, 2011I have an ASUS P5Q PRO motherboard with an integrated Atheros AR8121/AR8113 PCI-E Gigabit Ethernet Adapter.I installed Ubuntu 10.04 "Lucid" 64bit Kernel version 2.6.32.21 I have read that the driver isn't in the kernel, but there's a strange thing :
First if I try to run lspci from command line it doesn't reports Atheros Ethernet Controller.
Second If I try to run lshw -C network from command line it doesn't reports Atheros Ethernet Controller.
Third if I run ifconfig it only returns my loopback address.
Can I suppose that my Ethernet Intel Gigabit Controller is broken or that Atheros driver is missing?
CentOS 5 Networking :: Motherboard NIC Will Not Run Gigabit
Mar 3, 2009Using the onboard gigabit ethernet interface on an Asus M2N-CM DVI motherboard (nVidia chipset) with CentOS 5.2 the ethtool utility recognises that the NIC is capable of gigabit:
# ethtool eth0
Settings for eth0:
Supported ports: [ MII ]
Supported link modes: 10baseT/Half 10baseT/Full
[code]....
CentOS 5 Networking :: Trying To Upgrade To Gigabit
Feb 12, 2010I am running CentOS 5.3.The NIC on my motherboard does not support gigabit, so I bought a gigabit network card. I installed the network card and configured it via system-config-network. Everything seems to work fine as long as I keep a cable plugged into the original NIC. The original NIC works just fine if it is the only one with a network connection, but as soon as I uplug the original NIC I can no longer ping nor connect to the server via the gigabit NIC.
The original NIC is eth0, the new NIC is eth1. Is there something I need to do to tell the system that eth0 is not required or something? I've never encountered an issue like this before...
Networking :: Gigabit Network Card For CentOS 5.4 Server
Feb 11, 2010I am looking for a gigabit network card for my centos 5.4 server. I am looking for something known to work well with linux. I have been on the bestbuy site and I found a DLink (DGE-530T) card with support for linux from the vendor but after reading feedback from users with that card I am not so sure it is linux friendly. I am now thinking of buying online.
View 2 Replies View RelatedCentOS 5 Networking :: Broadcom BCM5700 Gigabit Not Present In 5.3
Apr 22, 2009I just kickstarted this box - I used eth0 and had no issues. After booting - eth0 is not available/present. This was not an issue in 5.2. This is a dell 4600 - both the 100mb intel and gig broadcom are onboard. I am about to try a different kernel. This is not a show stopper - it's plugged into 100m switch and I can just use eth1 - but I am curious as to what is different and why this no longer works.
[root@localhost ~]# ifup eth0
tg3 device eth0 does not seem to be present, delaying initialization.
[root@localhost ~]# lspci
00:00.0 Host bridge: Broadcom CMIC-HE (rev 22)
00:00.1 Host bridge: Broadcom CMIC-HE
00:00.2 Host bridge: Broadcom CMIC-HE
00:00.3 Host bridge: Broadcom CMIC-HE
00:04.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) .....
CentOS 5 Networking :: Netgear GA311 Gigabit PCI Adapter
May 16, 2009I have a Netgear GA311 PCI Gigabit Adapter. Any chance it might work with CentOS? It is not one of the cards listed when I do "NEW" Ethernet Adapter from the System Network menu. Maybe there is compatible choice?
View 5 Replies View RelatedCentOS 5 Networking :: On Board Network Card Refuses To Run Gigabit?
Jun 30, 2009I've just set up a PC with CentOS 5.3 runing on near identical hardware to an existing 5.2 machine. Motherboard is Asus M2A-VM which I discover by chance generally works very well with CentOS. Ethernet is on board Nvidia.The older machine just did run gigabit speed without any intervention at all, rather to my surprise. The newer machine insists on running at 100 Mbit which is annoying as it is connected to a NAS through a gigabit dumb switch.
The obvious difference between the two is that ethtool on the older machine says that supported ports are TP, and so the port is TP. Whereas the newer machine says that supported ports are TP or MII and insists on running MII. I cannot change this with ethtool -s eth0 port tp. Perhaps not too surprisingly, mii-tool says that the supported speeds range up to 100 Mbit.
Slackware :: No Network - Intel Corporation 82567LM Gigabit?
Mar 3, 2011Just did a clean install on a Dell Latitude E6400 of Slackware 13.1 and, for the most part, all is working great. Got wicd installed and wireless came right up, nvidia drivers installed and video is fantastic, but for some reason my wired connection isn't happening. The device is detected, but I can't get an IP.
Code:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
[Code]...
Hardware :: Detect Intel 82574L Gigabit Ethernet On Ubuntu 8.04?
Feb 14, 2011I'm having issues with Ubuntu 8.04 to see my Intel 82574L ethernet card. Ubuntu is not detecting it at all.
I downloaded the drivers from
[URL]
copied it to the server, untarred, make install ,and now i'm getting notifications that kernel-devel is not installed. I installed linux-headers from the install cd ( ihave the alternate and server one), but i cannot find any kernel-devel or linux-kernel-devel. The driver still does not want to build after installing linux-headers.
I need to use Ubuntu 8.04 due to some specific requirements, do i need the network cards to work.
Hardware :: Intel 82574L Mobo Gigabit Network Card
Sep 10, 2010NIC: Intel 82574L Gigabit mobo network card
Issue: After the server has been up for a random amount of time, the network connection is lost. Attaching a console and looking at ifconfig I see a large number of dropped packets and collisions.
use;
Code:
lspci -vxx
to list the make manufacture of NIC and the device driver it is using.
In this case: Intel 82574L, e1000e
Look in var/log/messages to get the version of the driver, in this case 1.0.2
Download .gz file with source code, follow instructions to install newest driver (e1000e.ko), in my case version 1.2.10. [URL]
CentOS 5 Networking :: Can't Get Broadcom Corporation NetXtreme BCM5761e Gigabit Ethernet PCIe Working
Sep 20, 2010from [URL]
i did the following
[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
Fedora Installation :: Intel Corporation 82579V Gigabit Network Connection?
Aug 29, 2011I installed Fedora 14 on my new PC but I don't have network connection. In fact, I hit the command "lspci" and the prompt return :
Code:
Ethernet Controller : Intel Corporation 82579V Gigabit Network Connection
So, I created a ifcfg-eth0 file on /etc/sysconfig/network-script because it doesn't exist :
Code:
DEVICE=eth0
TYPE=Ethernet
BOOTPROTO=dhcp
ONBOOT=yes
Then, I restart network service, but eth0 is down, no device found for the connection eth0.
CentOS 5 Networking :: Can't Install Card For Intel DG41TY - Missing Dependency: Kernel(net_core)
Mar 12, 2009I have been able to load CentOS on my computer. I have the motherboard DG41TY from Intel. It seems that the only problem I have is my network card does not work. On the Intel site there is a link to download the network driver for Linux. I did that. It's an rpm file. realtek-r8169-kmp-default-8.004.00_2.6.16.60_0.21-0.i586.rpm is the name. When i right click and say install it tried to connect to the internet for some thing and fails. of coarse it does there not loaded yet. I added a second nic that cent did recognize and got me online. I want to load the on board driver and remove the add on card. When I try to load now I get missing dependencys.
[Code]....
Fedora Hardware :: Intel Gigabit Ethernet(e1000e) Broke On 2.6.35 Kernel / Resolve This?
Nov 8, 2010Just a heads up to others. There is a kernel regression in the 2.6.35 kernel with regard to, some but not all Intel Gigabit ethernet adapters using the e1000e driver. After an otherwise successful upgrade from fedora 13 to 14, no ethernet connection could be made while using the upgraded 2.6.35 kernel that comes with fedora 14. The 2.6.34 fedora 13 kernels work fine and were fortunately still available after the upgrade.
I have personally seen the identical malfunction on all 2.6.35 kernels I've tried with both Arch and Aptosid and have seen similar reported problems on the Gentoo forum. In each case, going back to a 2.6.34 or upgrading to a 2.6.36 kernel solved the problem so this is almost certainly a kernel issue. My onboard Intel Gigabit ethernet adapter is:
$ lspci -vv | grep Ethernet
00:19.0 Ethernet controller: Intel Corporation 82566DC Gigabit Network Connection (rev 02)
I believe the intel ICH8 chipset motherboards are the ones primarily effected.
CentOS 5 Networking :: Can't Connect With Ethernet Card Intel 82801CAM (Centos 5.5)?
Sep 13, 2010I've installed from the CD the Centos version 5.5. When I try to connect to Internet I can't because I received some errors. I've the Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller also a wireless slot (I've the wireless card DWL-G650+) When I turn on the pc and I go to "Ethernet Device", I see set: peth0 (Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) ETHERNET CONTROLLER) and also set "Bind to MAC address": fe:ff:ff:ff:ff:ff I've set manually the IP address (I'm under router). Status is "Active" but can't go on the Net. When I change to "eth0 (Intel EtherExpress/100 driver)...sometimes become "Active" an other times said that the MAC address is different or to check the cable because can't find the IP. What can I do?
View 5 Replies View RelatedCentOS 5 :: Failed To Install Intel's Igb Driver And Can't Got VFs?
Apr 6, 2011in order to using the SR-IOV, according the guide HOW_SRIOV [Moderator edit: fixed link.]but i can't got the VFs.so i try to compile the driver :igb-2.4.13 and igbvf1.0.7.but i failed to install them.when i make install the igb-2.4.13 i got the errormsg:root@localhost src]# make installakefile:106: *** Linux kernel source not configured - missing version header file‚[root@localhost src]# i alreadly installed the kernel-headers-2.6.18-194.32.1.el5.x86_64.rpm .some system info maybe needed:Information for general problems.
== BEGIN uname -rmi ==
2.6.18-164.el5 x86_64 x86_64
== END uname -rmi ==
[code]....
Software :: Install Netcdf With Intel Fortran On CENTOS?
Jul 25, 2010I will install ncetcdf4.1.1 with intel fortran 11.1 on centos,according to the readme file,"configure.."is complete,when i command "make",the following message apear:
[root@localhost ~/netcdf-4.1.1]# make
make all-recursive
make[1]: Entering directory `/home/hu/netcdf-4.1.1'
Making all in f90
[code]...
CentOS 5 Hardware :: Belkin USB Gigabit Ethernet Adapter Not Recognized?
Aug 12, 2010I have spent them with Fedora and liked it a lot. Today I decided to install CentOS as this looks like something I would like to be using in the future. However a problem I could not solve came right at me after the first boot.
I have one eth0 device which is onboard lan and that was correctly recognised and activated. The second device is F5D5055 Belking USB Gigabit ethernet adapter. There was no problem with it whatsoever under Fedora. According to all the info it should be automatically recognised on kernel 2.6.14 and later. However when I plug it into the USB port, I can see its correct name in the device manager but it is not recognised as a network device. I have configured my Fedora as a firewall/router for my lan and definitely want to use that interface.
Hopefully without needing to do anything in the realm of compiling kernel, cause that is where my half a day long attempt to fix the problem left me.
CentOS 5 :: Blank Screen On Reboot After Install (not Intel DDC Issue)?
Oct 12, 2010I've been trying to install 5.5 here for the past few days, first from USB and now from the CDs, with no success. The problem occurs when I reboot after installing. After the BIOS has done it's thing I'm faced with a blank screen with a blinking cursor at the top left of the screen.
Initially I assumed that this was due to the intel driver problem which is reported in the release notes as a known issue, and the PC I'm installing on has intel graphics. However I have now done a text install and still have the same issue. I'm able to boot up the system using the CentOS live CD, which encounters no issues, and it mounts the local system no problem. After unmounting and remounting to get write access I'm able to change the device entry in /etc/X11/xorg.conf to have the Option "DDC" "false" entry. I can also see that the runlevel is set to 3 in /etc/inittab, still I get the blank screen on attempting to boot.
Any ideas on what might be wrong here? It really sounds like the intel driver problem people have described, and yet I can't even boot in text mode so that doesn't seem to be the case here. Could there be something wrong with the bootloader?
CentOS 5 Networking :: Intel 3945 Everything Active However Wireless Just Would Not Connect?
Mar 12, 2009working to sort out the damn wireless for too long. Mine in cent05 5.2 . network manager is on and I can see the icon on tray. It list all the wireless connections too, but just won't connect. WPA encry is disabled. further details below:
# lspci | grep Wireless 0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
# ethtool -i eth1
driver: ipw3945
version: 1.2.1dm
firmware-version: 14.2 1:0 ()
bus-info: 0000:0c:00.0
[Code]...
CentOS 5 Hardware :: Unable To Install 5.5 On Intel Desktop Board Dh55jp
Oct 6, 2010installing CentOS 5.5 on intel desktop board dh55jp?i cannot install the centos on it.. either python got an error or halt on loading the OS...
View 2 Replies View RelatedCentOS 5 Hardware :: Belkin Gigabit Ethernet ExpressCard Not Seen On Dell Precision M6500 With 5.5
Jul 20, 2010Actually, the title I was looking for was Belkin Gigabit Ethernet ExpressCard not seen on Dell Precision M6500 with CentOS 5.5 _when system boots with no link on this card_. When I boot this system with a cable connected to the Ethernet port, the card shows up (dmesg, lspci 0e:00.0 and ifconfig). When I boot it with nothing connected, it's like it doesn't exist. I know I could make it work with a loopback plugged in at all times, but am looking for a more graceful solution. Here are messages logs from when it's recognized
Jul 19 15:14:23 mss kernel: sky2 driver version 1.22
Jul 19 15:14:23 mss kernel: sky2 0000:0e:00.0: v1.22 addr 0xf6afc000 irq 193 Yukon-2 EC rev 2
Jul 19 15:14:23 mss kernel: sky2 eth0: addr 00:00:5a:11:45:5b
[code]...
Update: Should have been a little clearer - this card has the Marvell Yukon chipset. I'm trying to identify the part number without ripping out the casing.
CentOS 5 Networking :: Intel(R) PRO / Wireless 2200 / 2915 Driver Doesn't Work
May 31, 2009Wireless networking doesn't seem to work. When I try to create a new network interface with system-config-network, my wireless card doesn't show up. The following comes from dmesg:
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw2200-bss.fw request_firmware failed: Reason -2
[Code]...
I saw a post about this elsewhere and downloaded some firmware drives from [URL] and installed then. But, I'm really out of my league when it comes to this kind of stuff.
CentOS 5 Networking :: Intel PRO / Wireless 2200BG [Calexico2] Network Connection (rev 05) Not Working On 5.3
Jul 6, 2009Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05) is not working on centos5.3
# uname -r
2.6.18-128.1.16.el5
# lspci | grep Wireless
0b:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
[Code]....
Ubuntu Networking :: Not Getting Gigabit Connection
Aug 24, 2010I'm running a wired gigabit card using the atl1c driver. It works fine, but I don't get gigabit, only 100 Mbps. I have a gigabit switch and other Ubuntu machines on my network are gigabit. Is there any way this could be a software/configuration issue, or is the only likely explanation that my wires are of sub-par quality somewhere?
View 1 Replies View RelatedUbuntu Networking :: 10.04 Gigabit Lan Connection 10Mb/s?
May 11, 2010I recently did a clean install of Ubuntu 10.04 on my machine. It previously had windows 7 on it and everything worked flawlessly. Now the gigabit LAN connection only connects at 10Mb/s under Ubuntu. I installed a virtual machine with windows 7 and there it connects at 1Gb/s.
[Code]...