Networking :: Get A Subdomain Accessible Outside The Local Network?
Jul 25, 2011
I have a subdomain called www3 and I cant see it outside of our network. It's added in vhosts.conf in /etc/httpd/conf.d, and I can access it through [URL], but only when on vpn.
We have another www2 that is both local AND outside the vpn. I am testing the site live and need access to it. Is there another file besides vhosts.conf that I need to add the ssubdomain in? Here's what I added in my vhosts.conf
Code:
<VirtualHost *:80>
ServerName www2.mydomain.com
ServerAlias www2.internal www2
[code]....
View 7 Replies
ADVERTISEMENT
Nov 3, 2010
I just setup a ubuntu 10.10 box learn linux and to play around with, and want it to host my website. I can see the web site on my local network no problem but the outside world gets a time out message. I check to make sure everything is forwarded correctly on my router and the dns so i has to be something in ubuntu blocking out-of-network traffic how do i turn port 80 on to the outside world
View 4 Replies
View Related
Jul 30, 2010
I m using the pc as gateway....i have two NICs:1) 10.6.15.254 ---> for internal network 10.6.15.02) 10.6.0.115 -----> for out side world I can ping and ssh any out side machine but when i try to ping or ssh any machine in the 10.6.15.0 network it says host unreachable.... i can ping and ssh gateway i.e. 10.6.15.254 and 10.6.0.115 but not the client machine in the 10.6.15.0 network from out side world even i flush iptable rules i can not access any client machine i m using ubuntu 10.04 as operating system..
View 2 Replies
View Related
May 16, 2010
I'd like a way to see all of the devices on my local network and what their local IP address is. I recall that I used wireshark to troubleshoot a similar problem a while back, but it doesn't seem to have a way to see all of the devices- only the traffic. (I'd like to do this without having to physically interface with my router if possible, and I am in an encrypted network if that matters)
View 6 Replies
View Related
Jun 28, 2011
I have installed a web server on my local network. Everything is well configured and web pages are shown correctly from Internet (outside the local network) using the domain or the public IP.The issue is if I try to see that web pages (using the domain or the public IP) from inside the local network. In that case the router config page (192.168.1.1) is shown instead of the web pages.From inside the local network I'm only able to see the web pages using the internal IP address (192.168.1.XX).
View 2 Replies
View Related
Aug 16, 2010
For some reason, all the computers on my network can't reach each other via their host names. For example, the ping command doesn't recognize host names:
Code:
$ ping file-server
PING file-server (208.68.139.89) 56(84) bytes of data.
^C
--- file-server ping statistics ---
20 packets transmitted, 0 received, 100% packet loss, time 19152ms However, ping works fine if I use IP addresses instead. I would put the address for "file-server" in my /etc/hosts file, except for the fact that DHCP changes it's address occasionally.I attempted changing the line
send host-name "<host-name>";
in /etc/dhcp3/dhclient.conf to
send host-name "file-server";
but to no avail.
View 2 Replies
View Related
Nov 4, 2010
I am trying to have a serial device connect to my ubuntu machine via the com port, and forward that comport over the network to a windows box so that I can configure/access the device. I have looked into socat/ sredird but still haven't found an option that I can get to work.
View 1 Replies
View Related
Jun 29, 2011
Currently I am trying to get some fedora shares to simply connect to each other to access a read-only shared folder on a host machine (no security/encryption even required for these files!). I've tried to get a smb network share going but that didn't work (can't connect with nautilus), I've tried a quick fix with daap and rhythmbox so that they can at least access the music, but rhythmbox fails very miserably trying to connect/create that (and mt-daapd didn't help much) - Basically I get errors saying the host is unreachable.
I haven't even set up a firewall yet for this network and already I'm running into these fundamental problems. Currently I'm using Fedora 15. On a whim I tried the "public" folder and had sharing of the public folder over the network enabled - yep, didn't work (and I certainly didn't expect it to). I would be trying some more advanced CLI stuff, setting up an ssh server or something, but the computer-challenged people who have to access these files just want to be able to click something and have it work.For the operational requirements of this setup, a file synchronisation system would work (although highly inefficient since it would mean gigabytes sent over the network).
View 4 Replies
View Related
Aug 6, 2010
I will try to explain a bit first about my network typology: I have one cent os 5.5 machine with 2 nics - external one 86.x.x.122 and internal one with 2 IPs: 192.168.1.1 and 89.x.x.121. The ideea is that I have a public subnet (86.x.x.120/29) of IPs which are routable only through 86.x.x.122 so I have a webserver hosted on a different machine with the IP of 89.x.x.122 and GW 89.x.x.121 - everything works perfectly fine, except that I cannot access from the internal network 192.168.1.0 / 24 the so called DMZ (roughly) - the 89.x.x.122.
What really makes me crazy is that I setup the IPtables rules correctly because I can access the webserver from the outside world but I cannot accessit from the internal network...
what I'm missing - why the 192.168.1.0/24 cannot see the 89.x.x.122 machine... What IPtables rules should I add?
View 2 Replies
View Related
May 25, 2010
I've got an Ubuntu server hosting our websites and other various things here in our own home. We recently switched to a router that doesn't support loopback (abomination), so I've set up hosts files on our computers so we can access our own sites when on our home LAN.
However, we often take our laptops as we travel about, and I'm guessing due to the hosts files when we try to access our sites, it'll look on whatever local network we're connected to for our server, which won't work, obviously.
Is there a way to set up something like a hosts file that'll only try to look up the local IP of the server when we're on a specific network (our home one), or have one that tries to look for the local IP first, then proceeds to try and resolve the domain name and use the external IP if the local IP doesn't work?
View 6 Replies
View Related
Jan 10, 2010
I would like to know if there is a fairly easy "How To" for setting up my home network. I have 2 XP SP3 computers and 2 Linux with ver. 9.10. The XP boxes can see each other and share files and folders. I can see from an XP box one of the Ubuntu machines, but can't access any of the files or folders.
I get the following when I try: \Lstoragemusic is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. The network path was not found.
View 9 Replies
View Related
Nov 26, 2010
I've setup openVPN using bridging following these guides
[URL]
I'm running Ubuntu Server 10.10 My clients can connect and get their own IP within my ip range (192.168.1.x) They can ping each other and I've tested I can use the connection a lan game and a windows RDP connection. The problem is I cannot access any of the actual local network devices except the vpnServer. Is their something else that needs to be done to allow full network access?
View 5 Replies
View Related
Dec 23, 2010
On computer, I have apache server, configured at port 80, running. In local network, web page is accessible by my local IP (192...). Although, when I want to get to the page from the internet, I don't know right ip address, since router's one should be local, and also, router has it's own web page running at port 80. So I guessed that my server IP would be modem's one, which I don't know. Sometime in past, I figured out address of modem too, but it has it's own application running. Also, router supports port forwarding (which I guess, is needed), but I don't know how to get using to it. what address from internet should I have? How should I determine it?
View 8 Replies
View Related
Feb 7, 2016
I managed to set up an openvpn server, ip-forwarding and a nat iptable rule for that.
Almost everything works as expected, but my problem is:
Smartphone -> VPN -> Internet ==> works (by ip and hostname)
Smartphone -> VPN -> machine in my local network by IP ==> works
Smartphone -> VPN -> machine in my local network by its hostname => DOES NOT WORK
Machine w/ VPN server -> ping to machine in local network by ip or hostname => works
So, i wonder why i cant access a local machine through the vpn by its hostname. I guess I'm missing a forwarding rule??
iptables dump:
# Generated by iptables-save v1.4.21 on Sun Feb 7 20:56:52 2016
*nat
:PREROUTING ACCEPT [786:59064]
:INPUT ACCEPT [728:53047]
:OUTPUT ACCEPT [19:1487]
:POSTROUTING ACCEPT [20:1576]
-A POSTROUTING -s 10.8.0.0/24 -j MASQUERADE
COMMIT
# Completed on Sun Feb 7 20:56:52 2016
View 0 Replies
View Related
May 31, 2010
I'm working with a Ubuntu 10.04 LTS system with two network interfaces (both Ethernet). I wish to setup this system such that it is simultaneously connected to my local and an OpenVPN network and able direct traffic between the connections depending on what program is sending the traffic. The problem: Under my current OpenVPN configuration all network traffic is directed to the VPN.
My OpenVPN config file (some details omitted)
--remote [gateway ip] # vpn12 load:
--remote [gateway ip] # vpn11 load:
--remote [gateway ip] # vpn15 load:
--remote [gateway ip] # vpn16 load:
[code]....
In practice, I would like OpenVPN to operate out of one of my two network interfaces and leave the other interface connected to the local network. Then by default all network traffic should be directed to my local network unless I specify (on a per program bases) that certain traffic should go though the VPN. These two network connections can (should) stay completely independent of each other and do not need to talk to each other.
View 2 Replies
View Related
Sep 19, 2010
I need forward traffic from sub.domain:44400 to domain:2222. I think i can do this with iptables, but how?
View 1 Replies
View Related
Mar 31, 2009
I have two networks. One of them is wired, the other is wireless. The wired has an internet connection and a few other computers connected to it. The wireless network has a few hosts connected to it too, but it has no internet connection. What I've been trying, fruitlessly, to do, is make all connections that are bound to the internet, or my wired network, be routed that way, and all the connections to the hosts of the wireless network go that way.
Here's the setup..
Wired:
192.168.1.0/24 Gateway = 192.168.1.1
Route internet through here
Wireless
192.168.2.0/24 Gateway = 192.168.2.1
If my computer sends a packet to the internet, it should be routed through 192.168.1.1 If I send a packet to one of the local hosts of the wireless network, it should be routed through 192.168.2.1. Here's the routing table I've set up(This is one of many configurations I've tried)
Code:
$ ip route show
192.168.2.1 dev wlan0 scope link
192.168.2.0/24 via 192.168.2.1 dev wlan0 src 192.168.2.4
[code]....
With this, and everything else, I get destination host unreachable when pinging. The strange thing is that, if I unplug my eth cable, reboot and connect to the wireless network, everything is fine and I can access the router and the others. I'm trying to improve my networking skills, as I've had this of setting up a small linux box as a router for quite some time, for the fun of it, but I need to get routing under control before I go ruin my network.
View 6 Replies
View Related
Mar 29, 2010
As it looks like the number of DNS Top Level Domains are just going to proliferate in the near future, use locally on an RFC 1918 private network in order to prevent a future name collision issue?
.local is the most obvious one but as that was stolen by Apple for mDNS/rendezvous use it's probably wise to avoid it now.
View 4 Replies
View Related
Jan 21, 2011
If i want to use SSH to log on to my home computer, which is connected to the router, how do I go about connecting to it?If I get my external IP of the computer at home, it will show me the external IP of the router correct? Then I need to forward the router's external IP to my computer at home. But then, how do I connect using ssh? or do I need to consider my local IP of the computer at the router's network?
View 7 Replies
View Related
Dec 14, 2010
how to resolve an ip with a port in linux?, how to include this on the dns. So the user don't have to remember the ip address and the port. like the user will only type http://scanfiles then it will resolve the corresponding ip. is it possible?
View 3 Replies
View Related
Jul 23, 2009
Let me start off by saying everything WAS working...I have a lab environment comprised of two subnets (.1.128/25 and .2.0/25). On the .1, I have 3 Solaris 8 servers running NIS, NFS, databases, DNS, various services, etc... the network was setup on VLAN'd Layer 3 switches with the VLAN interface addresses acting as default gateways (dgw) for the two networks (on a single switch). The switch dgw was a router for outside connectivity. The servers are running ODCS OpenSSH.I was having problems with the VLANs, so I reconfigured the network so that each subnet had it's own switch as a dgw, and they route through a point-to-point static route setup as 192.168.0.1&2 on a separate VLAN between the two gateway switches.Here's where the problems start:First, ALL the services (NIS,NFS,databases,DNS,etc) are STILL WORKING. I can ping all the addresses. Traceroutes show the proper path thru the point-to-point, etc. There are NO firewalls setup, hardware or software, network or host-based... no iptables running, etc.
The three servers are on the .1 network. I can ssh to them from hosts on the .2 network no problem. However, I cannot complete an ssh login to them from any host on the .1 network. I get a password prompt, enter the pwd, and then it hangs until I receive a "Connection timed out" error message several minutes later. The next time I log in however, it shows "Last successful login" from the failed attempt.While the connection is hung, netstat on the server shows "ESTABLISHED" to the client on the proper port. nother odd indication is that I CAN sftp to the servers from hosts on the .1 network.
View 8 Replies
View Related
Feb 19, 2010
Running Ubuntu 9.10. In the Remote Desktop config dialog I get: "Your desktop is only reachable over the local network. Others can access your computer using the address 127.0.0.1 or tabatha.local." I understand this means only the loopback ip address is available. All my other machines show their true local ip address (e.g., 192.168.1.104) in this dialog. Thus I cannot log on to this desktop from other machines.
When I try to do a remote logon from another Ubuntu 9.10 box (or from an XP box using a VNC viewer), I get: "Connection to 192.168.1.102 has been closed." What steps are needed to make this machine show its actual ip address? All file sharing between the various machines is working properly and all windows shares back and forth between XP and 'nix, and among the the vaious XP boxes and linux boxes are available as designed.
View 1 Replies
View Related
Mar 4, 2010
How to make apache 2 accessible only on the local network? I have installed it in the easy way (but not the best, probably):
Code:
sudo apt-get install apache2 php5 php5-mysql mysql-server
And now I want to make apache only accessible in my local network.
View 2 Replies
View Related
Mar 25, 2010
up until about four days ago connecting to the local LAN was as simple as booting Ubuntu, and letting nm-applet automatically connect on Auto Eth0 But the other day it just randomly stopped working, with no cause that I can think of. I can still connect to the internet (This is via a PPPOE connection, running through the same wired interface) so it can't be a hardware problem with the ethernet port/cables themselves. nm-applet just stays spinning in circles, and nothing ever happens. I tried deleting the auto Eth0 entry, and creating another LAN entry with exactly the same settings, but I still get the same problems. way to completely restore nm-applet settings? Or some other way to give me access to the local network?
View 3 Replies
View Related
Oct 28, 2010
I've been having strange local network behavior with my Ubuntu 10.04 box. First off DNS was pretty flakey, but I replaced the automated DHCP servers with 8.8.8.8 and 4.4.4.4. Now I see very strange behavior in my local network, the symptoms of which are frequent dropped connections trying to use FTP, VNC, or Samba to try and connect to my other machines. I did a tracepath and got this back:
tracepath 192.168.1.136
1: 192.168.1.105 (192.168.1.105) 0.112ms pmtu 1500
1: no reply
2: no reply
3: no reply
3: 192.168.1.105 (192.168.1.105) 3002.961ms !H
Resume: pmtu 1500
[Code],,,,
View 1 Replies
View Related
Feb 15, 2011
Have a domain registered on a public ip. The domain server for the domain is on the same local network as the web server that uses the domain. The web server naturally has a local and public ip address.
The problem is that whenever I try to access the domain from my local network the lookup for the domain fails, as it cannot find the server from the local network. What's the most painless solution to this problem?
TL;DR: need for my domain to be accessible from both my local network and the outside world, now it's only from the outside which is a problem.
View 9 Replies
View Related
Jun 3, 2010
My router is a DHCP Server.My Access Point is a DHCP Server.I'm wondering if it is really necessary and usefull.Is it possible to get an IP from the Router through the Access Point.For exemple I connect my laptop to the wifi Access Point and the IP is given by the router only.
View 2 Replies
View Related
May 3, 2010
I Have Ubuntu 9.10 Server installed and for some reason after updating our server with the ubuntu update manager, we can no longer connect to the network via remote desktop, let alone not even able to ping. We are actually able to connect to the internet itself just fine so I dont understand why this isn't working
View 3 Replies
View Related
Jan 11, 2010
I've got router with: eth2 - local network (192.168.1.1), ppp0 - uplink (x.y.z.a)
my firewall:
Code:
# Generated by iptables-save v1.4.5 on Mon Jan 11 12:22:25 2010
*raw
:PREROUTING ACCEPT [1038480:666298388]
[code]....
somehow iptables -t nat -A PREROUTING -i eth2 -d x.y.z.a -j DNAT --to-destination 192.168.1.1 helps, but imho there should be some other solution. kernel is 2.6.31.6, architecture is x86_64.
P.S. i've also tried iptables -A POSTROUTING ! -d x.y.z.a -s 192.168.1.0/24 -j MASQUERADE that didn't help either.
View 10 Replies
View Related
Aug 19, 2010
icmp request from an ip that is in the same network as one of the local interfaces is not responded to, if the ping request is received via an interface in a different network. Is this some security feature?
Consider the below network
x.1|RTR1|-y.1---------y.2-|RTR2|-z.2------z.3-|LNX|-x.3
RTR - Router
x.1 -> 192.168.x.1
LNX - Linux machine
[Code]....
View 1 Replies
View Related
