Networking :: Connecting Wirelessly With Newly Installed Fedora 14?
Jan 6, 2011
I finally got the driver to be installed and to be associated with the network adapter. Now the issue is the wireless network adapter won't connect to my wireless network. I am new to Linux, and am trying to get my Fedora 14 to work online, without needing to constantly be wired in (what's the point of having a laptop if you have to be stationary). Anyways my network has WPA2 personal security with a TKIP + AES encryption (I switched it from solely AES because I thought that might have been the issue).I've heard a lot of good things about Linux, but so far its been frustrating trying to get this wireless connection working. I am currently taking a course on Linux, and I am using the opportunity to learn about and maybe switch over to a Linux OS which I have heard so much good stuff about in my previous courses.
View 2 Replies
ADVERTISEMENT
May 11, 2010
For reasons that are not terribly interesting I decided it would be a great idea to remove and re-install the xserver-xorg package. Which proved to be a much larger mistake than I imagined it would be. I purged the package, and then restarted.Naturally I need to have an internet connection to use apt-get to reinstall xserver-xorg, which is where my idea falls apart.I followed the directions in the How To: Manual Network Configuration. However, after I enter the command "sudo dhclient wlan1" I get the line "wmaster0: unknown hardware address type 801" twice prior to the output that the above link shows. Then I just get DHCPDISCOVER messages until I get a "No DHCPOFFERS received. No working leases in persistent database - sleeping."
I'm connecting with WEP to a router that I know works (because I'm using it to type this on my laptop right now) and I know that the wireless adapter(RTL8187) is installed properly because it automatically connected to my network when I had xserver-xorg still installed.I'm running ubuntu 9.04.I've searched for a few hours and I'm no closer to resolving the issue.
View 9 Replies
View Related
May 3, 2011
I am using an HP dm3 1030us laptop. The wireless adapter is and Atheros 5009. I have a fresh and clean install of Ubuntu Natty in it. I am trying to connect to a Linksys WRT54G2 that is in G mode using WPA2 Personal with AES. Router info:
Router Information
Firmware Version: 1.0.01 build 003, Mar. 26, 2008
Current Time: Mon, May 02 2011 20:34:37
MAC Address: 00:22:6B:4A:44:DF
Router Name: WRT54G2
Host Name:
[Code]...
View 4 Replies
View Related
Nov 10, 2010
I've recently installed Lucid Lynx 10.04 on my Dell Studio which uses an internal BCM4315 wi-fi card to connect to the internet. I was hoping it would work upon the install, but deep down I knew I'd have to tweak it a little bit to get it up and running the way I wanted. The card was instantly recognized but, at first, wasn't detecting wireless networks. This was quickly and painlessly fixed using System > Administration > Hardware Drivers, which I used to install Broadcom B43 wireless driver (b43-fwcutter). I rebooted and could not detect the local wireless networks.
I entered my password to my home network (correctly, I quadruple checked) but, unfortunately, it continuously tries to connect to the network with no successful. Occasionally I'm prompted to re-entered the password and the process repeats. The network I'm trying to connect to is a WPA/WPA2 network which I've heard to be troublesome. I haven't yet tried connecting to a WEP network but I'm fairly certain it will work and I will get back to this post when I test it in a few hours.
I'm curious if this question has been answered or if the problem has been solved and I just simply don't have the google skills to find it.
[Code]...
View 3 Replies
View Related
Dec 15, 2010
I'm having some issues getting connected with a TP-Link TL-Wn727N wireless USB adapter. I have no way to connect hard wired with the computer, but I have another working notebook to possibly download files. However, the second notebook is a Mac, so most of the posts I've found are not filling in all of the answers. Also forgot to note, I am using Ubuntu 10.10. I followed along with this and managed to get the card to find the wireless connection. However, the connection would never connect. After entering the security password the wireless icon would do it's thing and then pop up asking to ok the password again. I double, triple checked the password and it is correct. I found elsewhere that I should probably install wicd. This is where I've run into problems with finding the way to get files that I can download on the Mac and then installed on the Ubuntu computer. I managed to find this forum thread and downloaded this file I transferred the file from the Mac to the Ubuntu with a flash drive and tried to install. First the install said that Network Manager needed to be removed, so I removed it. Next it says "Dependency is not satisfiable: python-urwid." I'm not sure how to go about getting this dependency as it is not showing up in the package manager.
View 6 Replies
View Related
Sep 30, 2010
After spending several months coming up with ideas (and ultimately failing), I have found the easiest and simplest way to connect your Ubuntu desktop (or laptop w/o a wireless adapter/card) to the Internet using only a Linksys Wireless Range Expander and an Ethernet cord.
YOU WILL NEED:
Linksys Wireless Range Expander (WRE54G)
Ethernet cable
Linksys wireless router (that is providing your home/office with wireless Internet) The WRE54G can be purchased online through various websites, including eBay. They run anywhere between $10 and $40, but it's going to be cheaper than a USB Wireless Adapter (and no software needs to be installed, making it universal for most Linux distros).
[Code]...
View 1 Replies
View Related
May 20, 2011
when iam trying to use filezilla in a newly installed fedora 14,it shows a time out error. (when trying to connect to a server) my pxoxy properly working&i get internet connections, in my filewall ftp port is enabled. so what may be the issue now?
View 1 Replies
View Related
Jun 30, 2011
I am trying to get an internet connection on my newly-installed ubuntu computer.
i have tried <sudo apt-get install b43-fwcutter>. it responded <E: Unable to locate package b43-fwcutter>.
i then tried a <dmesg | grep -i firm>.
the it spat back at me.
[ 0.161805][Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.245165] pci 0000:05:08.0: Firmware left e100 interrupts enabled; disabling
[ 17.328521] Broadcom 43xx driver loaded [ Features: PNL, Firmware-ID: FW13 ]
[ 18.302783] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[Code]....
i read the instructions, but no downloads. and fast, too; caus if i don't set up my friends computer by sunday i dont get $50.
View 9 Replies
View Related
Jan 8, 2010
I can telnet mx1.hotmail.com 25 from all other machines, apart from my newly installed ubuntu 9.10 laptop. I just installed exim4 and mailx and set in /etc/exim4/update-exim4.conf.conf: dc_eximconfig_configtype='internet' But I can't send mail cause telnet mx1.hotmail.com 25 doesn't work. I can ping mx1.hotmail.com just fine.
View 2 Replies
View Related
Jan 14, 2010
I installed fedora 12 very recently after which I installed a few files. I don't know where these files get installed. Is there a default location for newly installed files?
If there is one, is it possible to change the location?
View 1 Replies
View Related
Sep 8, 2010
I have just installed fedora 13 onto my old PC. Everything is great apart from the fact that i cannot access the internet. My isp is TalkTalk, they do not support linux, and have suggested that i contact the Geek squad who might be able to help me for the princely sum of �30. i think that all that i need is the ip address for my Isp or something equally simple and my problem will be solved. failure to resolve this issue means that i might have to go back to windows.
The machinery that i have is an emachines 3210, 2.70 GHz, a Dlink wireless router, i am using a cat 5 cable plugged directly into the back of the pc, i am using fedora 13. ps my son is using windows and is connected to the internet still via WiFi.
View 5 Replies
View Related
May 5, 2010
just upgraded my laptop to 10.04, but I can't get the laptop's internal wireless to connect to my netgear router.the laptop doesn't even show all of the neighbor's routers.
View 2 Replies
View Related
Oct 11, 2010
I just installed Fedora Core on my Dell Inpsiron B130 laptop and I am having trouble connecting to the internet both wirelessly and with an ethernet cord into the router. When trying to configure my network, I dont recognize any of the ethernet adapters in the drop down list. I have been told that my wireless card is Linux compatible (dell y8029 dell wireless 1370 802.11/a/b/g mini pci). My ethernet card is a B130 Broadcom Ethernet Driver which isnt in the drop down menu either.
I read that I need to download an ndiswrapper but I dont know where to find this download AND even if I could download it to a zipdribe, I have trouble opening a USB flash in Linux becuase its not a "valid block device". This is after the command "mount /dev/sda1 /mnt/usbflash"
View 4 Replies
View Related
Feb 8, 2010
I have recently switched entirely to Ubuntu. I love Ubuntu and everything I need works fine, except the whole thing keeps crashing on a regular basis - screen goes black or white in a blink and totally hangs, requiring a hard reboot. How to starting trying to figure out what's happening? - I don't think it's hardware, as this laptop has worked fine with windows for a few years now. What sort of scans or checks can I do to investigate?
View 1 Replies
View Related
Jun 16, 2011
i cannot start a newly installed 11.04, i installed the boatloader into the root partition because i use another bootload called boot-us which start from its own partition, this worked fine with other ubuntu versions, but now i got the following errors after i try to start ubuntu with grub:
error no such device following a number
error no such disk
error you need to load the kernel first
View 3 Replies
View Related
Aug 16, 2010
how to identify freshly installed linux o/s
View 7 Replies
View Related
Feb 21, 2010
I have just installed ImageMagick but it doesn't appear in the Applications Menu. I have rebooted. Does it require another app or GU
View 5 Replies
View Related
Mar 19, 2010
I'm playing with my hard drive partitions and trying out different O/S versions so I want Grub2 to be aware of them on its boot menu. Currently I'm using the maintainer's version of Grub2 that came with karmic. Do I have to do a re-install of Grub2 or is there a makefile I can use? Specific commands that I would need be nice.
View 5 Replies
View Related
Nov 23, 2010
I am a beginner Ubuntu 9.10 user. I downloaded and installed the latest version of the sun VirtualBox. My problem is I cannot find where it is installed and that's why I could not run it. Generally, when I install a program the shortcut appears in the menu "Applications->ClassOfInstalledFile". But Virtual Box did not appear. How to find the icon, or simply how to run this application and have a shortcut of it on the "Applications" menu?
View 1 Replies
View Related
Feb 26, 2011
A friend installed QCad. All seemed well but he cannot find the app in the Applications menu under any category. Strange thing is, the Software Centre shows that it is installed. How can he run it if it does not appear in the Apps menu?n it be run from the command line?
View 4 Replies
View Related
Mar 22, 2011
I had a dual boot system (Ubuntu 10.04 and XP) and had a problem with my XP and had to reinstall it. Unfortunately I forgot to backup the boot file. After the re-installation of XP, I can't load Ubuntu 10.04 anymore, so I booted up Ubuntu 10.10 using USB, during the install, it didn't give an option to do a repair, so I did an install along with other OS. After the install, the GRUB showed now 3 OS:
Ubuntu 10.10
Win XP
Ubuntu 10.04
How can I remove the newly installed Ubuntu 10.10 without damaging the other OS? I'd like to keep the 10.04 because it's all customized and have several apps already installed.
View 7 Replies
View Related
Jul 30, 2011
I just installed ubuntu 11.04 on my PC from CD.I selected the option for it to run as dual boot with my windows xp (SP1 - don't laugh). I changed the boot priority order in BIOS to hard drive.The problem is the boot menu where i select the OS doesn't appear and I go directly into winXP. I have rebooted ubuntu from the disc and checked that all the ubuntu files are there and the drives are partitioned as set. So where is the boot menu?I notice the grub.cfg file refers to windows xp do need to change something here?
View 1 Replies
View Related
Dec 7, 2010
I have installed gcc-3.3 & g++-3.3 in ubuntu 9.04. Now I want to change the default compiler as gcc-3.3/g++-3.3. After creating links to newly installed gcc/g++, gcc works fine but g++ doesn't work.
When I give "$which gcc" or "$gcc --version" it works fine, but when I give "$which g++" it gives nothing and also "$g++ --version" it gives an error "the program 'g++' can be found in the following packages: * g++..." When I installed gcc I gave the command "$configure --perfix=/opt/gcc33 --program-suffix=33 --enable-languages=c,c++" . When I give "$which g++33" and "$g++33 --version", work fine.
I tried following:
$export CXX=g++33
$sudo ln -s g++-3.3 g++
Nothing happens. I am very new in Linux and I need to install ns2.1a9b in gcc-3.3.
View 2 Replies
View Related
Feb 4, 2011
have installed RHEL 5 recently and want to use internet on it. However it doesn't activate my connection when I try activating it through System>Administration>Network>Devices Tab.
My network adapter is "Realtek RTL8139/810x Family Fast Ethernet NIC", and processor is Intel Core 2 Duo. I read in a thread somewhere to edit a file named resolv.conf to include DNS server address, but don't know how to go about it exactly. I asked my ISP and he gave me two DNS Ip addresses
View 11 Replies
View Related
Jun 26, 2009
I am trying to use the ksctp on CentOS 5 newly installed machine. However, I am not able to find some files (/usr/include/netinet/sctp/h, libsctp.so etc.,) that are required for compiling my application.
View 1 Replies
View Related
Oct 6, 2010
I have just installed OPENSUSE 11.3 (32 bit) on a pc. I am brand new to OPENSUSE. I have connected a network cable from a router that previously connected a Windows XP machine to a home wired network/internet connection. The computer shows network connectivity, but when I launch Firefox it cannot find the OPENSUSE URL or any other such as my ISP. Do I need to install or activate some LINUX application to make the OPENSUSE system see the network /internet connection? I can't seem to find any application in the basic OPENSUSE installation that addresses this. Is there some kind of firewall that needs to be dealt with?
View 3 Replies
View Related
Jan 7, 2010
I've just installed ubuntu 9.10 on my laptop, and when I'm on vim, I can use arrow key normally in command mode, but in editing mode, if I use them, it print a letter, capital case + new line and doesn't move the cursor.
In putty I would try to play with the different type of keyboard settings (ESC[~, Linux, Xterm R6, VT400 etc...), but here, I don't know what to do.
At the installation time, I choose French/French keyboard.
Extra Question :
[URL]
It's said to have GRUB2 by default, but at boot time it says Grub 1.97 beta...
View 3 Replies
View Related
May 20, 2010
So I just had gotten to know the old Grub a little when I upgraded Ubuntu to find the new Grub, which I barely understand at all! My use of Ubuntu is mostly for learning and recreational as my bread and butter is working on people's messed up Windoze systems, since that is where the work is. Naturally I've got to use and work with Windoze to know how to fix it and keep it running cleanly, but Ubuntu was the first Linux I found that to me seems like something that could be potentially be embraced by "non geeks". I have as yet to get anyone to try it; it is all about keeping up with the Joneses and having what they have. There is also that old pervasive myth that you get what you pay for, which with computers, I find the opposite is so often true, that the good stuff is mostly free.
In any case I dabble a lot with Ubuntu for fun and personal knowledge, but since I put 10 on I had only Windoze 7 on my machine at the time. It picked it up and I purposely installed Grub to my Ubuntu drive (I used separate physical drives, so that if you removed the Ubuntu drive, 7 would boot as if Grub and Linux were never on the machine and that is the way I like it since I tinker a lot.). The trouble is that I need Win 7 to be the default and I don't know how to do that with Grub 2 (is it 2?) I used to know with the old one. Also, I have since added a 160GB PATA drive with XP on it, since so much of the help I am asked to give over the phone is with XP and I am not one who can talk others through things unless I can see it myself. Plus there are some things I do that just plain old work best with XP. So I also need to add XP to my boot menu, and it is, on a separate physical drive as well, and I wanted that the same too; if you made the XP drive the priority boot device it will boot XP as if it was the only OS on the machine.
What the ideal for me would be is to have the Ubuntu drive as the one it boots from, Windoze 7 to be the default OS, and XP to be on the menu too. I have been able in all of the time with Ubuntu and Linux in general to find precious little info on how to do things with multiple physical drives. It seems to be taken for granted that the only way people multi boot is with separate partitions on a single physical drive
View 2 Replies
View Related
May 23, 2010
i recently installed a few games via the Synaptic Package Manager on Ubuntu but they aren't in the Applications->Games menu when i click on it
View 7 Replies
View Related
Feb 17, 2010
I am trying to install RSYNC to my newly installed Debian (Booting from SD). I ran the command apt-get install rsync and I got the following error WARNING: This version of glibc requires that you be running kernel version 2.6.12 or later. Earlier kernels contained bugs that may render the system unusable if a modern version of glibc is installed. The installation of a 2.6 kernel _could_ ask you to install a new libc first, this is NOT a bug, and should *NOT* be reported. In that case, please add etch sources to your /etc/apt/sources.list and run: apt-get install -t etch linux-image-2.6 Then reboot into this new kernel, and proceed with your upgrade dpkg: error processing /var/cache/apt/archives/libc6_2.7-18lenny1_arm.deb(--unpack): subprocess pre-installation script returned error exit status 1 INIT: version 2.86 reloading Errors were encountered while processing: /var/cache/apt/archives/libc6_2.7-18lenny1_arm.deb E: Sub-process /usr/bin/dpkg returned an error code (1) When I ran uname and I found out the kernal version of my debian is 2.4.26. Then I ran apt-get install -t etch linux-image-2.6, and I get the error
Reading Package Lists... Done
Building Dependency Tree... Done
Package linux-image-2.6 is a virtual package provided by:
linux-image-2.6.26-2-orion5x 2.6.26-21
[Code]...
View 1 Replies
View Related
