I have a home server that I was able to up and till recently able to connect to externally and internally but something has changed. I can't connect through vnc, putty or ftp. if I ping the local address it can't be found. If I try to get to it using its external IP address I can get to the server and put in my user name but it wont accept my password.If I go to the server and use the password it works fine.
View 13 RepliesI'm running vsftpd-2.2.2 on Slackware 13.1 and I'm behind a NAT with a dynamic IP. I'm using pasv_address, which makes it necessary to have a crontab that checks whether my IP has changed, and if it has, edits the conf and restarts vsfptd. It's hackish but it works. I have also enabled FTPES on the same port that normal FTP runs. I have allowed only the 5001:5003 ports and I am aware that the recommented is 50 ports. However I never had an issue with the transfers since I'm the only user and have at maximum two simultaneous transfers.
I can connect remotely with FTP and FTPES with every client I tried but I'm having issues locally. FileZilla refuses to connect on FTP and FTPES. WinSCP can connect on FTP but not FTPES. Issues are gone if I enable pasv_promiscuous, which the manpage strongly recommends not to use unless "you know what you're doing". I don't. Why is this happening? And, can I fix the local connections without resorting to pasv_promiscuous?
Here is my config and log files from a failed local attempt.
vsftpd.conf
Code:
anonymous_enable=NO
local_enable=YES
write_enable=YES
local_umask=022
[code]....
I'm having issues with my SSH server.The server is running on a Slackware 13.37 machine, using the default SSH server software, which I believe is OpenSSH.On my Windows machine, I've tried connecting to my Slackware machine but can only do so using the external IP, not the LAN IP, instead I get a "Connection Refused" error using PuTTy. I've forwarded port 22 for both UDP and TCP packets to my Slackware machine.I don't really know what information you need so just ask me and I'll respond to the best of my abilities.
View 11 Replies View Related'm running on Ubuntu and I've succesfully setup apache alongside with a working php & mysql configuration - other computers connected to the LAN can access it by typing in my ip: 192.168.0.9however I would like my webserver to be accessible by all internet users...I've got my ports.conf file in the apache setup to listen on ports 80 and 8080 this is my ports.conf:PHP Code:
Listen 80
Listen 8080
Listen 2000
[code].....
I'm trying to workaround a limitation in a server application. The limitation is that I can only connect to a LOCAL mysql database. I am trying to fool the server in to using a remote mysql database. I was hoping to do this by simply forwarding 3306 to another server on the same subnet.To that end I've set up iptables rules to forward all connections to port 3306 to a non-standard mysql port on a remote server. This works, except that I need to deal with the loopback interface in a special way and I'm stuck.
View 14 Replies View RelatedWe've set up a Red Hat Enterprise Linux 5 server and can log into it remotely just fine (with root and other users), but if I try to log in locally with a keyboard and monitor connected to the machine, I keep being returned to the login prompt. If a login is incorrect, I get an error message, but if it is correct then the screen just blanks and shows the login prompt again.While booting the only error message that comes up has to do with SNMPD, so I don't think it's related.
I read this post on the forum which seemed like a similar problem but it didn't help (I wasn't getting the "Module is unknown" message he was). I also read another post somewhere that said he was having the problem because the server was trying to use AD to authenticate, but I checked that and it's not the case with our server.From what I'm told (I didn't set up the server myself) it used to work fine, but then "something" happened one day that made it do this.
How would I set up a website that would be only accessible locally. There's a router machine (server) that keeps provides internet access for a number of client machines. I need to set up a learning platform (moodle) locally. The server machine runs moodle server (apache server) and students should have access to their accounts locally (no need to be accessible outside of LAN). First of all, what would be the best network configuration for it.Sorry for a dumb question, but could I just come up with any domain name if everything stays locally within LAN?
View 4 Replies View RelatedI installed sendmail in RHEL5.4 with TrendMicro Spam scan engine. The configuration like sendmail should forward all the mails to scan engine after scanning it will deliver it to the mail domains. same way all the mails coming from external servers are scanned and the delivered to local box. My problem is when i sent mail for local users its delivered locally. but when i sending mail for external like yahoo its going through scan engine. I added the smarthost in sendmail.mc file also.
View 1 Replies View RelatedWe have a server were we no longer seem to be able to gain access, neither locally or remotely.When we try to connect via SSH we get a "Connection Refused". We have checked that it's not our standard firewall blocking the request, so it can either be the local firewall (which we disabled when installing) or that the process isn't running.However, when we try to login locally on the machine (as root) all we get is "Login failed". We've tried restarting the machine in single user mode to change the root password, and while we can do this succesfully, it still doesn't give us access when rebooting the machine afterwards.No other users (besides the standard users created when installing) are available on the server, so we can't say if this is a problem with the root account, or with logging on in general.
View 1 Replies View RelatedI just tried FreeNX. I work great. I am thinking about uninstalling the vino/vnc on my machine.
However, I'd like to know if FreeNX can access the session that open locally on the server. I tried session 0 and 1, none of them can access the local session.
For default vnc, the connection will let you access the local session on the server. Can FreeNX do that?
First of all, in whether I have interpreted this correctly: [url]
Where we want all users to be able to restore backups. This involves nfs exporting and mounting the backup directory ON THE SAME MACHINE, no...?
I have been trying to fix this all day, and can't figure out why its not working.
All my /etc/fstab /etc/exports /etc/hosts.allow /etc/hosts.deny must be correct as the file mounts (after booting, but NOT ON booting) with:
All the necessary (I think) services are starting on boot:
On bootup I receive the error:
Code:
I have other filesystems mounted from another server which all mount fine. Its just this one.
Can this be done? A company is currently running a postfix mail server. They got a new server and, while the users are migrated, they need to have the messages delivered on BOTH servers.
I thought it could be easily done in postfix: deliver locally AND forward mail to new server, but all solutions I found would deliver the messages in just ONE place.
I'm behind a very blocked firewall that only allows connections through port 80 and 443. I wish to ssh to my machine at home, but the port is blocked. Is there a simple server that I can run to route my ssh connection through http?
View 2 Replies View RelatedMy requirement was to direct certain traffic from various ports down different Internet connections. Basically, for locally generated packets, the OUTPUT chain in the mangle tables is used. You can MARK packets in this chain for ip rule processing.Now the "clear as mud" part. There must be a valid routing decision made without the fwmark, selecting the right source address, even if the gateway ip is invalid.
View 2 Replies View RelatedIs there an open source application that can download e-mails from a generic POP mail server, keep a copy of the mails locally and then deliver copies to multiple accounts on a LAN? I have a friend who uses a group e-mail account, and more than one person is always hooked onto that account. The problem is they cannot leave e-mail on the server, as it eats out their webhosting space, but if someone downloads a message in Outlook, the other users do not see that message.
View 1 Replies View RelatedThe problem with ssh is that it's a live connection; rubbish over a slow or packet loss full connection like satelite. Surely there's got to be something out there that allows you to compose the command you want and then submit it in one go with the return key?
View 3 Replies View RelatedIf you use Nautilus then you can just use the "Connect to server" from the file menu. However if you file manager does not support connecting to servers (like Thunar ) then you can use sshfs.
Code:
sudo apt-get install sshfs
You should create a directory as your mount point, say
Code:
mkdir /media/Server
[Code]....
Because my ISP is blocking every IP port under 1000, I'd like my local nat'ed server to be able to translate incoming and outgoing traffic from some port above 1000 to the default server port locally.Example :
To connect to my IMAP server (default port : 143) from the outside,I'd connect to my public IP, port 1143 (opened and nat'ed to the right server on my router) and the server would translate this port to 143 on the same machine.I wish I could simply configure my router to do that but sadly Linksys doesn't permit such setting... I also could modify the listening port of my server but I prefear to keep the default port inside my network.I think that iptables is the right tool to do that and I never used it and I must say that this tool is not so easy to configure at first sigh
I've got two things I am trying to do and there seems to be no simple solutions. I am wanting to ssh into my Linux box from my laptop (Mac) and play the arsenal of music I have stored on the Linux box back to the laptop locally. I hear of people ssh-ing from work and playing music from home all the time. I have googled for days relentlessly with no way of getting the music to play back to my laptop.
1. I would like to be able to do this outside my LAN. 2. Inside my LAN, I can only seem to get the songs to play on the server. It seems there is a way to forward the sound via ssh somehow. I haven't figured it out yet.
there's a way to locally proxy or spoof just one web page. That is, use tsocks or hosts or something so that when I run an application that requests [URL], it receives /home/user/myversion.html, but for any other address it gets the normal page. Seems simple enough, if a little unusual... (I'm trying to work around a wget bug.)
View 10 Replies View RelatedContinuing with my assigned task of migrating the company's PCs to GNU/Linux (openSUSE as server for GNU/Linux clients) I managed to set up a DC with roaming profiles for the few remaining Windows users, user validation and login for the openSUSE boxes and a few network shares with different rights. I know there are no roaming profiles for GNU/Linux and I can live with that but I would like to specify wich users/groups would have their home directories saved locally (notebook users) and which will save them on the Samba server.
By default home directories are saved locally but somehow Samba creates a minimal home directory for each user under /home in the Samba server. How can I tell the client box to use that directory? and how can I set up the few notebook users to save it on their disks? Maybe using the options under Yast > Security... > Users and groups management > Users (LDAP Users filter) > and then select the user and use the "Manage Samba account parameters" plug-in for specifying the different paths cant achieve this.
In Gnome Places->Connect To Server dialog, I am having problem using the Custom Location Service Type. I enter in the URI as
Code:
smb://username:password@ipaddress/share_name
I get an pop up error message that says:
Quote:
Cannot Connect To Server. You must enter a name for the server.
Which would be fine if there was actually a place for me to enter the name which there is not. What am I doing wrong. This is the first time I have tried using the Connect To Server dialog. Normally I just use a script I wrote to mount my share in a folder on my local drive as some programs cannot access the mounted network folder. In a browser all I have to do is:
Code:
smb://ipaddress/share_name
I tried using Windows Shares, but that did not work either. It does work if I click on network and access the share that way, but some programs like firefox and a few others that I want to save a file to my network drive do not show the network unless the share is mounted in a folder. So, I wrote a script:
Code:
#!/bin/sh
#mount ext storage drive
mount -t cifs //192.168.0.2/files -o username="username",password="password" /mnt/files
This works and I can use this, but it would be handy if I could just use the Connect To Server dialog.
I installed natty finally on my laptop (T410 Lenovo) via an upgrade from maverick. I tested maverick thoroughly first, since I had to perform the upgrade over the network, due to issues with natty booting from DVD. The upgrade went fine to natty, the system came up and I was able to get on locally and install other packages, though I did notice from time to time a lag in network performance. I installed VNC server and started it, as well as other network related services. However, I am noticing a definite issue with the network support and I suspect the natty kernel. The configuration looks sound, ifconfig, netstat and other functions appear to display the correct information, at least what I had with maverick (which worked).
Has anyone else seen issues with natty and networking? The glass looks okay, though I am using xfce and frankly there is nothing new there to really force me to upgrade, its just that this is a new LT and if I can cold install natty right now, it will save me an upgrade later.
System configuration (lshw) is below, ipaddress removed to protect the guilty..:
description: Notebook
product: 2522AP1 ()
vendor: LENOVO
version: ThinkPad T410
serial: R8M9B2Z
width: 32 bits
capabilities: smbios-2.6 dmi-2.6 smp-1.4 smp
[Code]...
I've spent days trying to setup access properly from a public address to a monitoring server that works fine locally. Everything works from public access until I try to link to a CVS repository. The rancid CVS repository is set up as a separate server (virtualhost). It appears the referring link causes a DNS error (105: Server Not Found) when the CVS repository server is accessed from the public address. Things work fine when accessing via localhost.
Localhost link:
[URL]
Public link: (this results in 105 error caused by redirection (bold portion of link))
[URL]
Code:
Virtualhost config:
LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so
JkWorkersFile /etc/apache2/workers.properties
JkLogFile /var/log/apache2/mod_jk.log
[code]....
I need to connect with a server apart from the server which I work on. What is the command for this?
View 5 Replies View Relatedi want to share my problem that after updating fedora 12 by my mobile broadband. mobile broadband connection stopped working. i mean now it can't connect to the server.
View 1 Replies View RelatedI set up 9.10 as a file server at my house, connected through the router via LAN. I had everything working, using it as a Samba file server. I moved to to my college apartment and I am now having troubles... I changed the network information in /etc/networking/interfaces to what it should be (or at least I thought so...)
I can ping myself, but nothing else. Also, on my router configuration page, the server is coming up as a connected device with the correct IP address that I set it to.
My problem is that i cannot connect to anything that is running on this server via WAN. i can connect to everything from anywhere just fine through LAN though... i have all in use ports opened up on my router. i tryed messing with the ubuntu firewall and even tryed turning it off. but no luck. btw i am running ubuntu server 10.04 with matching desktop!
View 5 Replies View RelatedI just loaded NX Server, following the instructions from NoMachine. When I try to login from a client I get "Authentication Failed for User My Username" I can use the same client to connect to another NX Server on my network so I know the client works. I'm not clear if I need to set up a user, or if I can just logging with the username & password from the host (which is what I'm trying).
View 1 Replies View Relatedi cannot connect via WAN to my ubuntu server. Literally out of nowhere it stopped working. i could connect to my Ubuntu server via WAN alll night long without trouble.
Servers running Ubuntu Server 9.10