Networking :: Trying To Bridge Wired / Wireless Networks
Jan 30, 2011
[PC]--(wire)--[Router1]--(wire)--[Laptop]==(wireless)==[Router2]::[Internet]
My setup is above, I hope it comes out OK on this forum, and someone can understand what its supposed to be! My problem is I am not sure how to get [PC] to be able to see [Internet]. From [Laptop] I can get both networks to work, and have tried using brctl to bridge them, but as soon as I do "ifconfig br0 up" neither network... works anymore (cant ping either router).
View 2 Replies
ADVERTISEMENT
May 29, 2009
My current network setup at home is all wired, and that's worked for me so far. Now I want to set up a wireless connection on my Linux box that I can connect to with both my laptop and my Nintendo DS. I'd like to be able to host a wireless network from the Linux box, connect to it with some other wireless device, and have the wireless device communicate with the router, the internet, and other computers on the wired network. I have the wired network set up (statically configured) as eth0. Other network adapters present on the system are eth1 (not in use) and wlan0, wlan1, and wlan2 (identical cards, remnants from the last time I experimented with wireless).
So I guess my question comes in two parts:
1) How do I set up wlan0 such that it can host? Is Ad-hoc mode okay for this, or do I need to set it up in Master mode?
2) How do I forward connections between the wireless net and the router?
Note that I will be using WEP, as it is all that the NDS supports. I'd like to set up MAC filtering as well, but not until after I get something that works.
View 11 Replies
View Related
May 3, 2010
I am running ubuntu 9.10 on a dell xps m1530 laptop dual booting with windows 7. I am trying to achieve the following setup.
Wireless router <=========> Laptop <-----> Switch <-----> PS3
---- wired
==== wireless
Both laptop and ps3 have static ip addresses
The reason for this is I can connect to the internet on my ps3 through my laptop, and I can stream from my laptop to ps3 through wired connection. This works fine in windows 7 all I had to do was right click bridge connections. As I dual boot I don't want to have to make any changes to the settings on the ps3.
My interfaces are:
eth0 - wired
wlan0 - wireless
I installed bridge-utils and created a bridge and added both eth0 and wlan0 to it. However I could not get it to work. I have also tried internet sharing through network manager and firestarter.
View 2 Replies
View Related
Nov 15, 2010
There are two networks in house I rent with other roommates. One wired, the other wireless (two separate routers), long story of why it worked out that way. For some reason, I am getting the same ip on eth0 and wlan0 even though both connections come from two separate routers, see below:
[Code]...
View 2 Replies
View Related
May 28, 2010
I'm trying to install Ubuntu 10.04 on my Toshiba A200-12U laptop (with an Atheros AR5007EG wireless card), but networking is being problematic.I entered Network Configurations and tried to get 'Auto eth0' working -- I went to Edit > IPv4 settings and filled in 'Addresses' with the details of my connection:
Address: 192.168.1.254 (the local IP of my router)
Netmask: 255.255.252.0
Gateway: 94.195.208.1
[code]....
View 4 Replies
View Related
Apr 12, 2011
I am a (somewhat) newbie to Linux (but have an extensive Windows background), and I have just installed Debian Squeeze in an old EeePc 701 4G using the netinst version only with the following packages:
eeepc-acpi-scripts
x-window-manager
gnome-session
gdm
gnome-themes
gnome-themes-extra
plymouth
bridge-utils
Now I would like to install Debian in my main laptop, but I think it won't be able to connect to any wireless networks during setup and before installing firmware-brcm80211 and wireless-tools (its wireless card is a Broadcom 43224AG). That being, and to avoid connecting the computer directly to the router (it is not easy), I would like to bridge the EeePc's wireless connection to my laptop using a cable. I tried using the instructions found at the Debian Wiki, but I couldn't set it up properly.
View 1 Replies
View Related
Oct 27, 2010
I want my netbook to connect automatically to both the office wired/static network and to the usual wired/DHCP networks.
wicd is wicked but netsearching hasn't revealed how to configure it for both wired/static and wired/DHCP except by manually switching profiles.
wicd's profiles can use pre/post(dis)connect scripts but I don't know how to integrate them into wicd when they are upping/downing connections on cable (un)plugging.
If it is not practical to solve this within wicd, I'll explore standalone scripts to configure eth0 on cable (un)plugging, as detected by ifplugd.
View 2 Replies
View Related
May 17, 2011
I'm trying to bridge connections between a wired and a wireless connection in one of my computers. I was told it was impossible due to low-level limitations in the wireless subsystem, but apparently theres a way if you somehow forward packets from one port to the other. Is there a way I can achieve this?
View 1 Replies
View Related
Feb 5, 2011
I have a LAN (2 PC !) wire connected and I use a Huawei e182e to join the internet (If you have problem to install the Huawei on Linux, don't install drivers proposed on forums or don't try to unlock it. It's not necessary, simply install a kernel > 2.6.34 and it will install itself as a perfect plug and play). On the unconnected machine, the Internet is accessible normally from the broadband dongle, but the connection stops when I plug the LAN cable. It's normal since the PC cannot use both network connections simultaneously without a previous configuration, and the question is precisely there !
Bridging could be a solution but mobile broadband uses ppp protocol that is not on the same layer as wired LAN. brctl refuses to add the key into the bridge configuration. Vtun seems a better approach since it works more independently from the protocols, but it must be installed on both sides and the broadband dongles does not accept software installation in it. Documentation from Huawei is quite inexistent. Actually the story could be the same for a computer connected to a wired LAN and using a wireless dongle, but here bridging is feasible (not tested by me) because they work on the same layer. I tried to deactivate LAN switching in the BIOS: no result static address with gateway pointing on the other device (I tried everything) no result. How to bridge a ppp dongle with a wired LAN?
View 6 Replies
View Related
Jan 13, 2011
I've two networks (network 1 in the apartment, network 2 in the basement/server room) I would like to build a vpn connection between the two networks. In networks 1 I have a 24h running PC/Firewall/Debian Server. For network 2 I would like to buy a RVS4000. Is it possible to connect the two objects (Debian and Cisco)?
View 2 Replies
View Related
Mar 8, 2011
I am new in ubuntu and really pleased with performance of ubuntu. Now I am in between a trouble of connecting two network in a switch. I may explain the scenario in detail. I have two Internet connections one connected through LAN (wimax) in to switch having internal DHCP (now we enabled this DHCP to connect our network) and another wireless internet connection connected via USB to a PC, this PC using ubuntu and I am successfully configured ppoe (EVDO), can use this Internet, and this ubuntu possessed PC also connected to Wimax via Network switch. We have 12 PC connected to this switch to share Internet (currently we all using Internet from Wimax through network switch). Still we have a problem of consistency of wimax connection our region. So we decided to connect ppoe (EVDO) in to the same network if Wimax connection is not available. How I connect both in to one network?
View 1 Replies
View Related
Jan 7, 2010
I could use Wireless network. I could see several different networks in my range. Then suddenly the network stoppedworking, and I can no longer see any networks under "Wireless networks".The Wired networks works fine.I tried upgrading ubuntu, but nothing changed. Just to confirm, I rebooted the computer in Windows Vista (Dual boot) andconfirmed that Wireless worked fine there. No hardware problem then.The suggestions I have found on this and other forums suggest looking at the output from iwconfig and ifconfig. But since I'm a n00b at Ubuntu I don't know what to make of it.
This is the output:
emil@emils:~$ iwconfig
lo no wireless extensions.
[code]...
View 1 Replies
View Related
Jul 30, 2011
I am trying to connect networks connected via locked down wireless routers. Here is the setup:
Internet <-> eth0 - server - eth1 providing DHCP <-> hub <-> wired clients & to WiFi router with NAT & DHCP <-> WiFi clients.
I want the wired clients and the WiFi clients to be able to talk to each other directly, but the locked down WiFi router (meraki) is in the way. the wired clients get their IP address from the server, the wireless clients get theirs from the meraki WiFi router. I can't reconfigure the WiFi router to bridged mode without paying meraki a sizeable annual license fee. What options are out there to get through the WiFi router? I came across OpenVPN and ethernet bridging, but broke networking on the server when trying to configure the br0 interface. I followed these instructions: [URL]
View 2 Replies
View Related
Feb 27, 2010
I have a Windows 7 machine which is having issues with a Linksys Rangeplus wireless card, specifically kernel dumps every couple of hours. I have an old (really old) tower sitting in my room which I would like to turn into a wireless bridge so that I could connect the windows box to the internet without dealing with the blue screens. I plan on using Knoppix as I have it available already, but if it would be easier with another distro I can always download it. If this doesn't work I'm going to have to buy an old WRT54G offline and convert that with DD-WRT...
View 3 Replies
View Related
Jan 11, 2010
I've been running Karmic since it was officially released on my Dell Studio 17 (specs are in my signature) with a Broadcom wireless half mini wireless card.hen I installed Karmic, it gave me the option to install proprietary drivers for my video card as well as 2 Broadcom drivers, STA and one of the BC43 drivers. I installed all of these, and the only problems I had were with the audio. I spent a few days troubleshooting the audio and finally got PulseAudio set up for my card.
Almost 3 months later, I was making use of my wireless network at home, as I had done plenty of times over the previous 3 months, when I closed the lid (thus putting the computer into sleep mode) and took it to the hospital to stay with my fiancé¥ after her surgery. When I got to the hospital, I couldn't get their network to show up. Network Manager didn't even recognize the network. We had also brought my fianc饧s laptop (same machine with a slightly less powerful CPU and only 4 GB of RAM). She is running Windows 7, which detected the hospital's network with no problems.After trying to ad-hoc the hospital network with no success, I finally just gave up and played Sudoku and toyed with some graphics stuff in GIMP until we came home. Upon returning home, however, I was shocked that my card didn't even detect our home network.
I have been unsuccessful for the past 3 days in getting Network Manager to identify our wireless network. The wired network connects without issue and I am able to make use of a USB Belkin adapter, which identifies all 7 of the various wireless networks in my neighborhood, including our home network.While I would be able to simply carry my Belkin adapter with me in order to make use of wireless networks, I would really like to solve this problem with my Broadcom adapter. I've gone through the Ubuntu Wireless Network Troubleshooting guide, but I still can't get it to workOutput of lshw -C network:
Code:
*-network
description: Wireless interface
[code]...
View 8 Replies
View Related
Jun 11, 2011
For some reason, ubuntu cannot find local wireless networks. In fact, the Broadcom wireless card Ralink RT5390 802.11b/g/n seems to be incompatible with ubuntu. I've tried numerous 'solutions' on the Internet, but none of them seem to work on my computer. Tutorials I've visited have recommended downloading the b43 drivers from the Synaptic package manager and also the bcmwl-kernal-source package. Nevertheless, the wireless never turns on and Additional Drivers never shows anything at all. After several exasperating hours of trying to get my wireless running I've decided to turn to the forum for help. I'm sure there's probably more information I should supply, but I'm honestly not sure what that would be.
View 2 Replies
View Related
Oct 18, 2010
I have spent the last 24 hours trying to work a wireless bridge (a D-Link DAP-1522) into my network configuration. It would connect to our gateway here at home (some 2WIRE piece of garbage AT&T hands out, but I digress), and two computers (an Ubuntu Desktop and an Ubuntu Server) would connect via the bridge.
The bridge SEEMS to connect to the router, and indeed, the Ubuntu Desktop PC is able to access the internet. The server, however, is not, and neither computer can communicate with the other (ping, SSH, etc.) furthermore, the router recognizes the presence of these two computers on some level, but does not seem to know their IP addresses (I assume this is related to the computers' inability to communicate).
Before I get too far into this, here are a few links/items for the sake of clarity. The first is a shoddy diagram of my (proposed) network topology, for all of you out there who, like myself, understand things visually:[url]
This is the output from running "ifconfig eth0" on the Ubuntu Desktop PC, which sits behind the bridge. The PC is connected, and can ping hosts across the Internet, but can only ping the router locally (that is, it can't ping any other device in the house, on either side of the bridge):
Code:
The router uses wireless encryption, not MAC addresses, to restrict access/traffic, and all wireless devices (including the bridge) have been provided with the proper credentials. There shouldn't be any devices being denied access on account of their MAC address. In fact, the router's control panel lists the PC and the Server among the recognized devices (even lists their MAC addresses), but provides no IP address and always considers the two computers to be "offline." And yet, I am writing this very post from the Ubuntu PC. Sigh.
I am very comfortable with computers, and reasonably comfortable with Ubuntu/Linux and the Linux command line -- I've been using the operating system for just over a year now -- but networking issues have always been perched right on the edge of my understanding. In short, it's likely this issue has more to do with me than it does with the hardware itself (although the more forums I browse, the more I start to doubt this bridge...).
View 2 Replies
View Related
Nov 19, 2010
I have a wireless network that is upstairs, i cannot run a cable down here, however i've got 3 boxes that i want to run as servers..
1. Desktop running 10.10 (the one with the wireless card)
2. Server running 9.10 (no wireless card.. is currently connected through a wireless B gaming bridge)
3. An old P4 that I will be putting 9.10 on and running as a server.
Take the Desktop that has the working wireless card as my normal desktop and also running as a passthrough for the switch to go to the other two while still allowing all of the port forwarding to the other two to be handled by the router upstairs so basically what I want to do is this
= wireless connection
- wired connection
[Internet]--[wireless router]==[Desktop]--[switch]--[server1 + server2]
Everything i've come across so far has been for going from a wired router to turn a box into a wireless AP unfortunately i need the reverse.. a wireless bridge. if someone can point me in the right direction (or i'm not against hand holding if it's available.
View 2 Replies
View Related
Dec 8, 2010
I first want to say that I am very new to Ubuntu so please forgive any ignorance I have successfully given internet access to my xbox by connecting it via crossover cable to my ubuntu 10.04 laptop and given the eth0 settings "share with other computers" My issue is that the ip address being given to the xbox is 10.42.43.10
How can I change this ip address given, or use a static ip address (ie 192.168.x.x) because using this ip address keeps my xbox from accessing windows shares on WORKGROUP on my 192.168.x.x network.
View 1 Replies
View Related
Mar 30, 2011
I am trying to configure an external wireless bridge for a few systems to replace a very long, duct taped cable.
I have it set up and it is connecting, at least I can see the pfsense router on the other side and ping any machine in the network.
Here's the issue, I cannot get dhcp to work across the link. I set a static address (dns servers and all) but when I try to ping google i get "Network is Unreachable"
View 1 Replies
View Related
Feb 5, 2010
Using Ubuntu Server 9.10 x64 and a tomato router to act as a wireless bridge to connect to another router. The reason I ask is because I do have the router set on WDS mode on the tomato firmware. I think I have it configured to the best of my ability, but when the interface is up, the signal doesn't get pushed out (no received packets) and it gives something at the bottom of an ifconfig eth0 "Interrupt:28".
View 4 Replies
View Related
Feb 26, 2010
I'm trying to share my ethernet via my wireless card. It doesn't work. Here is some info:
lspci
04:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
05:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
lsmod
b43, mac80211, cfg80211, ssb
I've tried everything listed in these forums but every time I run
sudo iwconfig wlan0 mode master
Error for wireless request "Set Mode" (8B06) :
SET failed on device wlan0 ; Invalid argument.
I tried the STA drivers and get the same thing except the kernel module loaded is wl instead of b43. Is it even possible to set this card to master mode? I can't find jack on the net.
uname -r
2.6.31-19-generic
View 3 Replies
View Related
Mar 24, 2010
I want to create the following network:
I have a Belkin 54g ADSL Router/Modem connected to ADSL
I connect my laptop (Ubuntu 8.04) wirelessly to this router
I have a Netgear DGN2000 Router/Modem with NO connection to ADSL
I connect my desktop to the Netgear using a wired connection
I want to bridge the two routers and use the internet on the desktop
The Belkin 54g Router setup has options for Wireless Bridge.. I have selected "Enable Wireless Bridging"; as far as I can tell there is no corresponding option in the Netgear DGN2000's settings to act as a wireless bridge. I have changed the ESSID, Security, and Channel all to the same settings and when I turn on the Netgear router the signal strength of the network dramatically increases. I am unsure whether this is the "Bridge" connected... or if the Netgear's signal is just drowning out the Belkin's signal. In any case I cannot use the internet when connected to the network with the Netgear turned on. What do I do?
Or is there some way I can share internet like this:
wireless wired
ADSL--->Belkin54g----------->Laptop-------------->Desktop
View 1 Replies
View Related
May 5, 2010
How I can make this "link" with Ubuntu 10.04?
pc 1 == win xp
pc 2 == Ubuntu 10.04
View 1 Replies
View Related
Jul 20, 2011
how do you manually reassign a wireless bridge in xubuntu 10.04.. Or basically configure it without having to do so through the installation process.. Hopefully there are commands for it.
View 1 Replies
View Related
Dec 8, 2008
I want to set up a bridge using bridge-utils within /etc/network/interfaces like is shown here in this guide: [URL] The problem is that, at the same time, I want eth0 to have a specific static IP address. Right now I have a configuration for eth0. This guide tells me that I should not configure eth0 outside of the br0 configuration.
View 3 Replies
View Related
Feb 11, 2010
I have an Acer Aspire 3000 and just installed a Netgear WGR614ver9.I installed FreeSpire and it works great.{well except} I am online with Eth0 now. It says the wlan0 is working but it does not see any wireless network. I tried it at a couple of places other than here where I thought it should detect a wireless network but it did not. How can I determine if it is FreeSpire or the Wireless card at fault?
View 1 Replies
View Related
Feb 6, 2009
abit new to fedora 9, the installation went ok but now i cannot get access to my network.what happens is that i can click on the wireless icon on the desktop but then i'm not allow to click on my network. there is an edit function available but not sure how to use it.
View 1 Replies
View Related
Feb 14, 2010
I have been having trouble getting my network card to access networks. I currently am using a wired connection. A while ago when I first installed Linux on this same computer, I got it working by installing the driver. But since I reinstalled Linux, I tried the process again with no success. Can anyone give me explicit instructions on installing the network card driver so I can use it on Linux.
View 1 Replies
View Related
Mar 23, 2010
I have Ubuntu 9.10 on VirtualBox.How can i view my wireless networks via 2 ways ?
1)via Terminal(Shell)
2)via a suitable apps in GUI.
View 3 Replies
View Related
