Networking :: Routing Table For 2 Servers?
May 18, 2009
routing tables using "ip route 2" I have a server(server1 from now on) with eth0(internet connection) and eth1(lan connection). eth1 have 2 more alias devices = eth1:1 and eth1:2 On my server 1 the eth0=public ip, on eth1=192.168.10.1/24, eth1:1=192.168.20.1/24 and eth1:2=192.168.30.1/24 server1 is running squid and iptables to all 3 networks (eth1, eth1:1 and eth1:2) All of the clients have access to internet. Now what i want to do is add 3 more networks via a router(linuxBox = server2 from now on) connected to server1 in eth1. so the network will be like this:
Code:
server1
eth0=internet
eth1=192.168.10.1/24 (connected to server2 and other clients)
[code]...
View 2 Replies
ADVERTISEMENT
Apr 6, 2010
I have a firewall, this consists of three NIC's:
Code: eth0[192.168.0.2] eth1[192.168.1.2] and eth2[10.10.165.2]
I am trying to ping eth0 from eth2, but I am not able to succesfully get a response from pinging the device, I am using:
Code: ping 192.168.0.2 -I eth2
I have tried to insert routing data into the routing table, but it still doesn't work
View 2 Replies
View Related
Jul 25, 2010
I have an Ubuntu 9.10 server installation which have been working flawlessly for some months. The server runs bridged networking, because of some VMs that runs on it. But, a couple of weeks ago the network connectivity have started to disappear now and then (usually once a day or so). Running "sudo /etc/init.d/networking restart" always kicks it back to life.
After a bit of debugging I noticed that when OK the routing table looked like this:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 * 255.255.255.0 U 0 0 0 br0
192.168.122.0 * 255.255.255.0 U 0 0 0 virbr0
default 192.168.1.1 0.0.0.0 UG 100 0 0 br0
While when in the non-working state it looked like this:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 * 255.255.255.0 U 0 0 0 br0
192.168.1.0 * 255.255.255.0 U 0 0 0 eth0
192.168.122.0 * 255.255.255.0 U 0 0 0 virbr0
default 192.168.1.1 0.0.0.0 UG 100 0 0 eth0
default 192.168.1.1 0.0.0.0 UG 100 0 0 br0
Deleting the two routes to eth0 restores the networking again. Why these "erronous" routes gets added, and what adds them? How to further debug this?
View 6 Replies
View Related
Apr 5, 2010
After making an changes (add/modify/delete) to /etc/static.routes, what command should we use to reload the routing table?
View 5 Replies
View Related
Mar 1, 2010
A packet is sent from the computer to the router it's connected with only the destination address in it, right? So - what does "kernel routing table" mean?
View 10 Replies
View Related
Nov 29, 2010
I have to connect my private adres 10.0.0.2/26 to an external adres 192.168.1.253/16
I am not allowed to use Nat so i have to create a static routing table..
Ive put a router between with 2 nic's:
Ive seen on various sites that :
Should do the trick but it isnt working for me ... Ipforwarding is enabled.. Also when i use the sys/proc command..
How to make the table? I am using Opensuse 11.2
View 5 Replies
View Related
Aug 26, 2010
eth1 which is connected to interneteth2 internal networkbecause the server is part of a complicate network i need to setup the routing tables for eth1 and eth2but i need that the default 0.0.0.0 must be read from eth1 while i dont know why the server first read the one on eth2. this creates big problem to me.if i add the default route to eth1 i get an error saying that the default route already exist (i suppose is the one on eth2)how i can solve this ? i must create a script that first delete the default from eth2 and after add it to eth1
View 1 Replies
View Related
May 16, 2010
Is there any way to restore back the default ip routing table? For example, my current routing table is something like
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
109.123.95.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 109.123.95.1 0.0.0.0 UG 0 0 0 eth0
Then i connect to a vpn service and the routing table get's changed..now when i close it, it doesn't reset back to my default routing table.
View 1 Replies
View Related
Apr 24, 2016
After a long time that I didn't touch my PC I just forgot how to configure the routing table I trying to ping the router and get "destination host untraceable" I manually assign the ip of the machine to 192.168.1.2 .And the gateway ip to 192.168.1.1 the only problem now
Is to get to the router interface on 192.168.1.1 to configure my internet and to browse
View 7 Replies
View Related
Aug 5, 2010
My routing table does not get complete for some reason. I'm using a Huawei E220 USB modem on openSUSE 11.3 using NetworkManager to connect.When I connect to the net the routing table looks like
Code:
/home/freefox # route
Kernel IP routing table
[code]....
View 9 Replies
View Related
Dec 10, 2010
When I try wget URL... I get failed: connection timed out.I have created br0 as a bridge over eth0 to run this VM. The host has this IP 172.30.8.135.The host has access to internet through eth0 and this is the output of route inside the host.
View 1 Replies
View Related
Apr 28, 2011
First, I installed CentOS 5.5 and Quagga 0.99.17.
Then I configure to run OSPF v2 on R1 and R2 following below:
I added --> #echo "1" > /proc/sys/net/ipv4/ip_forward to forward packet on centos
View 2 Replies
View Related
Mar 3, 2009
I want to use tab networking in my kvm with routing.Can any one guide me how i can do it. i have been reading different guides over the net but not understand any one clearly.I have read this[URL].. One problem is this all my server are remote and no gui is running.I am able to install kvm with ssh console with -nographic and -x "console=ttyS0" option now i want to change from bridging to tap networking with routing.And i have live ip on kvm guest/Virtual machine.
View 1 Replies
View Related
Feb 15, 2010
What exactly does gateway in a route refer to? I know what a default gateway is- it's the route of last resort. But used in context of a host route (with destination specified), what is a gateway and why is it important?
View 5 Replies
View Related
Aug 19, 2011
We purchased a virtual server from GoDaddy (1 month trial) to set up as a proxy for our networks (24 of them). I am having 2 separate issues. The first is I can't configure/install NAT and support is telling me the only way I can is to purchase a dedicated server. Here's the error:
iptables -t nat -A PREROUTING -p tcp --dport 80 -j REDIRECT --to-port 3128 iptables v1.3.5: can't initialize iptables table `nat': Table does not exist (do you need to insmod?) Perhaps iptables or your kernel needs to be upgraded. Here's the fix: [URL] So, what I am hoping to do is configure this by just opening port 3128 directly, and only allowing access from our networks. As a test I did this and allowed only from our office and it did not work. However I can't connect, so I am wondering what I am doing wrong? Here's my squid configuration:
[Code]....
View 4 Replies
View Related
Feb 4, 2009
So my server running FC4 died last night and I decided to go ahead with the long-awaited upgrade to FC10 while I was rebuilding my server. I use my server for a number of things including, but not limited to: router, firewall, web server, mail server... I have a typical configuration process that I have followed since before fedora, and it has worked well for me up through FC4, but my usual config process doesn't work on FC10.
First of all, I don't want SELinux running, I didn't see an option to not install it during the FC10 setup, so how to I properly disable or uninstall it afterwards? Second, I was unable to even configure the server to route traffic from my internal network to the web, here's the process I usually go through for this:
[Code]...
I don't have a static IP from my ISP, so I'm not quite sure how to add the default route. I think I need to do something like "route add default gw xxx.xxx.xxx.xxx eth1" where eth1 is my external NIC, correct?
What else do I need to do to route traffic? I noticed that I wasn't even able to ping my server from the internal network even though they are on the same subnet, my server's internal NIC has an address of 192.168.7.1 and my computer on the network has an address of 192.168.7.2. If I can get this going to I have internet access again at the very least, I can move forward with the web server, email, etc.
View 8 Replies
View Related
Jan 10, 2011
I have one external ip address and a few domains. Would it be possible to have each domain on a internal domain and the box that sits on that external ip route to the internal. This would be for a number of server (mail, apache, imap, pop3, https ) So for example:
Some visit domain1.com ->external ip -> 192.168.10.100 Someone else visit domain2.com ->external ip -> 192.168.10.101 and so one with a number of domains
View 3 Replies
View Related
Sep 1, 2009
I have an environment of roughly 30 machines that all have ssmtp installed with identical config files. I also have logwatch installed on all of them, and it runs nightly as it is supposed to. The problem is that any given night, a random number of machines do not send out the resulting email from logwatch but instead dump it to ~/dead.letter. The number of failures changes every night, but most of the time it is between 20 and 30 of my servers.
View 2 Replies
View Related
Apr 21, 2010
Just curious to see what everyone's opinion on using routing vs. bridging for openVPN. I'm installing openVPN on a linux box that I'm using as a router. What I was wondering was your opinions on which one of these two options to use.
View 2 Replies
View Related
May 2, 2010
I am playing with openvpn, and I got stuck.I am using ubuntu server for openvpn server, which has 2 physical NICs, one is directly on internet and other is LAN, where few pcs are connected on.
View 5 Replies
View Related
Jan 14, 2010
As far as I can tell, the server guides only explain a bit about what dynamic routing is, but not how to implement it.
My situation is this:
We require a server with 3 interfaces. One local, one to a vsat link and the other to a fibre link. The fibre will be the default route for Internet traffic but we want dynamic routing to automatically switch to the vsat link when the fibre link goes down (which happens fairly often in Zimbabwe!) and then switch back to the fibre link when it comes back up again.
The first option would be to handle dynamic routing on a Cisco router, but at the prices of Cisco devices here, it's not the most affordable option.
View 3 Replies
View Related
Sep 17, 2010
There are two connections in my Ubuntu server: eth0 is a normal interface and, eth1 is configured with an static IP, and has an domain name with that IP. But this connection is charged by bytes, very expensive.
how to set up the route table so that: everyone can access my server with the domain name, and let the traffic goes from eth0 as much as possible(I have a proxy service on my server. At least, let the proxy traffic goes from eth0)?
[Code]...
View 7 Replies
View Related
Jun 8, 2011
I am trying to install some program: rosinfo: - Create mysql database for rosinfo - Create table hosts, locks. Use file docs/rosinfo.sqlAnd I need to create table hosts, locks, using file rosinfo.sql. I have that file, but dont know what to do with it.
View 1 Replies
View Related
Jul 13, 2011
I've started a webserver at 127.0.0.1:**** I want to be able to use a database for this server. Which schema do I use to add a new table to? Do I create a new Schema altogether?
View 5 Replies
View Related
Jun 8, 2010
i know exactly what i need to do, im just not familiar enough with command line to do it properly.i have 7 computers.the first 4 are connected to a router via wireless at one end of the house. of the last 3 only 1 will be able to access the router via wireless, so it needs to share it's one wireless connection via ethernet. this computer i'm going to call 'server'server will have two IP'swlan0 192.168.1.6 this connects to the router that has internet access.eth0 i intend to have the following settingsip:192.168.0.1sub: 255.255.0eth0 will connect to a second router, where the cat5 cable goes from the server, into the internet port of the router where i will define the router's static IP:IP: 192.168.0.100sub: 255.255.255.0gateway 192.168.0.1i have then set the router IP for LAN handling as 192.168.27.1 and all ethernet connections will have a 192.168.27.x IP.
so i need to know how to, without a gui application, use the terminal to assign server eth0 a proper IP address, and tell the server to take the connection it has and share it through eth0 to supply internet for the last 2 computers via ethernet.i had it set up in this way with a windows machine being the one that had the wifi access, but i'd rather have it setup for the ubuntu server to do this task. security is imperative for these 3 remaining machines, so just getting 2 more wifi adapters for a connection to the initial router isn't an option.the 2 that connect to server do so through SSH and though server IS connected via wireless it only makes outward connections through
View 1 Replies
View Related
Mar 12, 2011
I would like to store JPG files in a mysql database table. I figured that using BLOB fields on the one hand and the 'load_file' command on the other would do the trick. Here is how I set up the table:
mysql> create table blobtable (id int(10) not null auto_increment,
fileName varchar(15) not null,
file longblob not null, primary key(id) );
Query OK, 0 rows affected (0.51 sec)
Then I tried to enter the data:
mysql> insert into blobtable(filename,file)values('pic',load_file('/var/www/temp/IMGP4764.JPG'));
Which got me the following error signal:
ERROR 1048 (23000): Column 'file' cannot be null
It seems to me that the file path to the JPG file (although correct) is the source of the problem, and is causing the load_file command not to work. My first attempt was with the JPG file in my PC's home directory. When that returned the same error message, I figured that maybe the file had to be in the PC's (server's) web area so I put it under the 'www' directory.
View 7 Replies
View Related
Sep 27, 2010
I have a mysql server which "goes down" every day at 9, because the debian-sys-maint user needs to run a table check, for no particular reason.
I assume it's a cron-job, but I can't find anything related to this. There's the mysqlautobackup script, but that runs at 4 in the morning, which is expected and perfectly acceptable.
View 1 Replies
View Related
Sep 6, 2010
My setup is...I have a wireless access point using laptop as a gateway. The AP is also connected to a switch as is the laptop. So the laptop has two interfaces one wireless and one wired. A third device is using the AP to connect to a server on the internet. The AP sends the packets to my laptop where they are dropped. I've been looking for a solution to this problem without success. Basically is there a way for my laptop to forward all packets it sees from a certain IP address to whatever destination address they have?To clarify, my laptop is just the gateway of the AP and none of the packets are addressed to it at all, it just picks them up using a sniffer or similar tool.
View 1 Replies
View Related
Mar 10, 2011
I have a pc with debian 6 (without GUI) installed on it and want to use it as server at home. It has 2 ethernet nics. Now i want to configure the routing process. Searched internet for a long time found something but couldn't get it work.
View 8 Replies
View Related
Feb 17, 2010
When setting up an SSH proxy, I know you can configure Firefox to route DNS requests through the proxy. Is this possible from linux directly? I'm trying to use wget through the proxy, including DNS lookups.
View 3 Replies
View Related
