Networking :: Possible To Run Wvdial As Soon As Detects USB Modem?
Jan 3, 2009
I post here wanting to know if it's Possible to run wvdial as soon as linux detects USB modem.I have already installed and done the setting for using wvdial. I can successfully use wvdial command to setup internet connection.But I have only 1 USB modem. When my wife wants to use it for her PC, she disconnects it from my linux machine.What I want to do now is... 1 that when I attatch the USB back to my linux, I'd want it to do "wvdial &" automatically.2 that when linux is rebooted, "wvdial &" done automatically as soon as it detects USB modem.
View 2 Replies
ADVERTISEMENT
Apr 11, 2011
trying to connect to the internet using wvdial but facing problems. the command runs fine until i get PID ppd Carrier detected. Starting PPP immediately.
--> Starting pppd at Sat Oct 23 10:40:09 2010
--> Pid of pppd: 2520
nothing happens after this.. I checked the resolve.conf and it is empty. i put openDNS server addresses but still did not work.
View 3 Replies
View Related
Nov 20, 2010
1) I have micromax 372g usb modem(3g).. but it is not being connected ubuntu 10.10
2) I suppose my device is being recognized and I tried this method [URL] but when I tried to install, it said that package missing for wvdial.
What should I do. Where can I get this package and how can I install it (with no dependany check). My life is extremely difficult without internet on ubuntu, I am ready to give any other information that u need. I have ubuntu 10.10 maverick dual boot with windows. And yes take into consideration that I don't have internet on ubuntu. So provide me full detail how to install it from other media and commands to execute them.
View 9 Replies
View Related
Jul 31, 2011
I m using Ubuntu 11.04. I have USB modem MMX 300C HSIA Rev.A (BSNL) I m getting problem in installing wvdial. I have done following steps :
1) I have installed following packages in that same order:
libxplc0.3.13
libwvstreams4.4-base
libwvstreams4.4-extras
libuniconf4.4
wvdial_1.60.1+nmu2_i386
2) Then I run wvdial command but getting following o/p
--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
[Code].....
View 1 Replies
View Related
Mar 13, 2011
I have only a dial-up connection. I've been using the 32-bit version of WVDIAL and its associated programs in Karmic Koala for over a year. I recently finally got around to installing Maverick Meerkat on a different drive. The 64-bit version. I see that I need the 64-bit version of the modem software, and I haven't found it right away. Where can I get it? The programs required under 32-bit Karmic Koala:
libwvstreams4.6-base
libwvstreams4.6-extras
libuniconf4.6
wvdial
All of these had .deb filename extensions. Also, largely because I only have a slow dial-up connection, I don't have any updates for either Karmic Koala or Maverick Meerkat installed. If you happen to know that I absolutely need some particular update(s)
View 2 Replies
View Related
Aug 13, 2010
I m trying to show the power of linux to the world bt no body helps me after lots of googling i cant find a proper way to install rpm,gz,bz2 n etc software in linux. without any error. dependency,error,n lots of other problem that i have faced. so being on pt..from last 3 days i m trying to install Wvdial 1.61 bt i m unable to do it. some wvstreams.pc file stoping me. i m really frusted. being a new to linux no one can expect lots of searching by me me..from last 3 days i m just trying traying n only tying..every time Google rediectes me to this site.. This is my last try.
I had compile and install Wvstream.tar.gz file sucssesfully. mainly i dnt knw wheter it is done or undone..then i m trying to install wvdial as my main aim.bt as put the command make...it show some thing like could nt found wvstreams.pc...stop i had personally chk tht file in the pkgconfig folder bt it still shows me that error. i want to connect my cell phone to RHEL5 any how.. i want to use internet in linux..
View 2 Replies
View Related
Jul 21, 2011
Now that I'm able to connect to Internet via my MC760 wireless modem on /dev/ttyUSB0, I am losing time!
I have lost 5 minutes while online for 1/2 hr.
Yes ntpd is running. What is strange is that right now, I'm in town at coffee shop and using wireless. I'm not losing time at all. This isn't the first time I've noticed the loss of time. It's been happening every since I was able to connect with the usb modem. I just had to come to town and use wireless to see if the problem existed while on wireless (b43). While being connected via the MC760, I've also noticed that the cpu temp rises and the fan runs quite a bit more than when not connected via the MC760. Here is the top portion of output of "top" code...
View 3 Replies
View Related
Jul 17, 2011
I have a usb modem(A phone): Huawei Technologies Co., Ltd. E220 HSDPA Modem / E230/E270 HSDPA/HSUPA Modem It is recognized by Yast under modems.But I am getting No carrier detected on wvdial,qinternet and many I have tried with. Here is the output:
[Code]....
View 3 Replies
View Related
Jan 2, 2011
My wireless card in my Acer Aspire 7551G shows wireless networks in range but wont connect to any of them. I am running an Atheros AR928x Wireless network card (windows reports it as a AR5b93). Also as a side note, whenever i turn on my computer, my wireless is disabled. However not connecting is my primary problem.
sud rfkill list
Code:
sojurner@Sojurner-Laptop:~$ sudo rfkill list
0: acer-wireless: Wireless LAN
Soft blocked: yes
Hard blocked: no
[code]....
View 3 Replies
View Related
May 22, 2009
I'm developing an application to monitorize the network interfaces plugged in my PC. I know that wireless interfaces are listed in /proc/net/dev, but I don't know how to identify a cellular NIC.Is there any virtual file in /proc that shows the cellular NICs in the system? Could I identify different cellular NICs looking at /dev/tty?
View 2 Replies
View Related
Jan 19, 2009
I am using a laptop with a realtek8139 integrated adapter. When I boot the live cd (Puppy), I go to configure the internet connection, and shows the module for the card has automatically loaded, and I just set it to DHCP and that is all. After installing the os, however, I go to configure the connection, and it tells me that no module has been loaded, so I should manually choose from the list. When I do, it tells me that it failed to load. I have also tried allowing it to probe by loading every possible driver, to no avail. I have reinstalled the os twice, and it does not recognize the adapter, but when I boot live, it works fine. Any reason why it would do this?
View 1 Replies
View Related
Nov 29, 2010
Basically, I just installed Fedora in my desktop (use it on my laptop), and have a big problem, which is that Fedora (13), detects my wireless card (Edimax nMAX EW-7728IN), but when I try to connect to my wireless networks (WEP & WPA) it hangs and asks again for the password. I know the problem isn't from my routers,since I'm right now connected via Fedora 13 in my laptop.
View 4 Replies
View Related
Jul 29, 2010
I am trying to connect to Internet using Wavecome modem with Airtel GPRS connection. I am able to successfully connect and browse the Internet using wvdial. But if I use pppd, I am getting the error message as "LCP Terminated by peer".
The exact error I am getting is pasted below.
[root@pscu1320 ppp]# pppd call gprs-wavecom
GPRS modem init: press <ctrl>-C to disconnect
Wakeup Modem
[Code].....
View 1 Replies
View Related
Dec 30, 2010
trying to install wvdial-1.61-3.fc13.i686.rpm from last two days on centos5.5 but it is demanding for dependencies.these are written below
Code:
libuniconf.so.4.6 is needed by wvdial-1.61-3.fc13.i686
libwvbase.so.4.6 is needed by wvdial-1.61-3.fc13.i686
libwvstreams.so.4.6 is needed by wvdial-1.61-3.fc13.i686
libwvutils.so.4.6 is needed by wvdial-1.61-3.fc13.i686
[code]....
i have tried alot but could not find these dependencies. is there any huge rpm which can resolve all dependencies requirement?
View 2 Replies
View Related
Jul 4, 2010
I've installed F13 on two Dell E6400 laptops, both with Broadcom BCM4312 wireless cards. After updating them both, I enabled the RPMFusion repos and installed the akmod-ed wireless driver on each (following these instructions: [URL] Wireless works perfectly on one laptop, but doesn't seem to be working on the other. The wl module is activated (shows up in lsmod) and the wireless card is enabled (wlan0 shows up in ifconfig), but Network Manager isn't showing any available networks. For the record, wireless works on both laptops with Ubuntu 9.10 I am going to try cloning the entire drive on the working laptop and sticking it on the dud one.
View 11 Replies
View Related
Jun 7, 2010
I'm wondering here with my 64-bit 9.10 why my wireless does not seem to work with my Zonet wireless USB adapter. The adapter is working and it detects my network (a WPA) and attempts to connect, and after about 20 seconds or so, I am disconnected.
View 9 Replies
View Related
Jan 2, 2011
so my wireless isn't working. My netbook wireless detects the available networks but when I try to connect it doesn't. The box that asks me to put in the password occasionally shows up but it still doesn't load. I even tried re-installing Ubuntu and didn't fix anything.I'm using kernel version 2.6.35-22-generic and
Code:
*-network
description: Ethernet interface
[code]...
View 7 Replies
View Related
May 3, 2010
I use a wireless 3G card via wvdial and was wondering how could i possibly share it via my laptops wireless with WPA2. I want to be able to connect a second laptop I have and my iPhone via wifi.
View 3 Replies
View Related
Oct 23, 2010
I have a couple of questions for anybody willing to answer them. I have a GSM modem with a t-mobile SIM card that I am currently trying to use to connect to the Internet. I am using Lucid amd64 machine.I have been running wvdial with a baud rate of 115200 with much success getting the output below:
Code:
sudo wvdial
--> WvDial: Internet dialer version 1.60
[code]....
View 1 Replies
View Related
May 5, 2010
What I want to do is to share the internet connected to a computer with a telephone, over another telephone which is permanently connected to the pc.The thing is, that some guys found a way of making this on windows, in fact, I already set it up on xp and works like a charm, it involves configuring in a certain way the telephone, and to use 2 programs. One is CCProxy, which redirects the internet connection to the telephone, and another one, which updates the IP adress of the telephone connection to dyndns, so that I can put that adress on my second telephone as proxy, and this way, surf on the net through my home internet on the telephone anywhere. Tricky right?
Now, the thing is I don't like at all booting windows only for sharing internet with my telephone. So I want to do it in linux. I use Ubuntu and Puppy linux home.I tried setting up the connection to the modem with wvdial, and... I got connected! But hey, when I connect to the telephone, I lost my internet connection (main, cable based, the pc connection) :-S. I mean, somehow, the "active" connection for the browsers and all the internet programs is now the connection I have made with my telephone, which is plugged to the computer.Now my objective here is that NO CHANGE of active connections get done when I start the connection to the phone, and then, get a program like CCProxy, and a dyndns updater for sharing the internet connection on the pc, to the connection made on the telephone-modem wired to the computer.
View 1 Replies
View Related
Mar 23, 2011
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
View 1 Replies
View Related
Mar 19, 2011
I already had solved the problem [URL].. but after several yum updates it has appeared again. Within the script "/etc/ppp/ip-up" the sixth parameter isn't provided. But the sixth parameter should be "ppp0" (in this case). The script sets it into the variable $LOGDEVICE and passes it as first parameter to annother script. Successfully I had patched "/etc/ppp/ip-up". I would like to report a bug but I'm not sure if it is a wvdial or a ppp/pppd or a Fedora 14 bug.
Now (after several yum patch updates) my patched /etc/ppp/ip-up doesn't help anymore. The registration at the mobile phone provider seems to be ok but the internet connection isn't initialized.
According the man pages wvdial starts ppp or pppd and one of them seems to call /etc/ppp/ip-up. At which point in the subprocessed scripts (under /etc/sysconfig/network-scripts/) I didn't find out yet.
View 5 Replies
View Related
Sep 14, 2010
I have BSNL EVDO usb modem and I use wvdial to connect to internet in my Ubuntu 10.04.I want to share my internet over wifi so I can use this on my wifi phones. I searched all over and actually ended up here.
View 2 Replies
View Related
Dec 13, 2010
I've Alcatel X220 cellular modem and I'm connecting via wvdial (Is there anyone who know how do I connect via NetworkManager?). when I'm connecting via the wvdial Evolution and pidgin won't connect to the internet. It's look like they like the NetworkManager and won't connect via other way.
View 2 Replies
View Related
Apr 6, 2010
Using Centos 5.4 I've successfully set up pppd and wvdial to automatically dial out but I need wvdial to call an alternative number if the number is busy or dialout fails for some other reason and I cannot get this to work. I've gone back to basics and tried manually soliciting wvdial with a minimal wvdial.conf:
[Dialer ppp-client]
Password = secret
Modem = /dev/ttyS1
Phone = 11111111111
Phone1 = 22222222222
[Code]...
View 3 Replies
View Related
Jun 28, 2010
I do not have any shares setup on my home network so this has never been a big deal to me. My mother finally took enough interest in my operating system to allow me to dual boot 3 of her computers. Everything was up and running like a charm and then she asked "What about connecting to the file server?"
I click on "network" under nautilus and start clicking around - no where in here is the file server that every Windows system on the network can see (5 or so other systems with xp/vista/7 on them - so I know the share works). A small bit of time and some command life foo later I had hunted down and manually mounted the share and added and fstab entry for the drive so my mother would never have to go through that on her own.
That being said - did I do things the hardway here? Can someone please tell me there is an easy method that successfully detects and connects to samba shares without having to resort to CLI? Personally I do not mind doing this, but it is an issue when I am installing Linux for a beginner.
View 2 Replies
View Related
Feb 8, 2010
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
View 4 Replies
View Related
Mar 31, 2010
My resolv.conf states:
No nameservers found; Try putting DNS servers into your ifcfg files in /etc/sysconfig/network-scripts like so: [...]
After running wvdial. I suppose I have to create a file ifcfg-ppp0, but what does it have to contain in order to automatically grep the DNS servers from wvdial?
In Ubuntu, it works just fine, just that I don't have an Ubuntu installation anymore.
View 3 Replies
View Related
Apr 5, 2011
my wvdial.conf file content is:
[Dialer Defaults]
Modem=/dev/ttyACM0
Baud=460800
[code]....
View 2 Replies
View Related
Mar 3, 2010
I use wvdial and a 3G modem to connect to the network. On the same host I also run bind9 which is authorative for my local network.The problem is that when wvdial connects, it overwrites /etc/resolv.conf, which means that DNS lookups on that host no longer get made to localhost (as specified by the original resolv.conf file) and end up at the local instance of bind which is authorative for in-house hostnames, but end up with the ISP who doesn't know my in-house host names.The local DNS forwards to the ISP, so the ISP's DNS'es are not required in resolv.conf.How can I prevent wvdial from overwriting /etc/resolv.conf?Removing write privileges from /etc/resolv.conf did not work.
View 3 Replies
View Related
