I have an NFS mount that is in my NFS client's fstab file
Code:
192.168.1.102:/mnt/mythtv /mnt/mythtv nfs defaults 0 0
sudo mount -a will mount it after i have booted the system.
[code]....
I have attached a 2 TB LUN to the HP Blade Server running CentOS 5.3 via a Qlogic HBA. To provide the cluster users with sufficient storage areaa, I want to move only the home directory from the default partitioning schema to the attached storage and leave the remaining partitions on the main harddrive of the server. So, having copied user directories & files to the new location, i.e.,
/cluster/home2 on the new storage partition, what modification(s) should I make on the server?
/export/home is the default location for the users.
/cluster/home2 is NFS shared directory serving as the new home location for the users.
I'm running:CentOS release 5.3 (Final)
when I plug in a Small USB key, hotplug sees the new device, mounts it in userspace and creates a link on the desktop. The user can open the link and read and write to the USB key. I have tested 3 different usb keys and they all work. When I plug in a USB 250 GB drive (Lacie), also fat32, it doesn't mount:
May 11 12:25:29 tinkerer kernel: SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB)
May 11 12:25:29 tinkerer kernel: sdf: Write Protect is off
May 11 12:25:29 tinkerer kernel: sdf: assuming drive cache: write through
May 11 12:25:29 tinkerer kernel: SCSI device sdf: 488397168 512-byte hdwr sectors (250059 MB
However, I can mount the drive manually as root. The problem is that the user cannot write to the device if it's mounted by root.Is this a problem with hotplug/udev or another way that I can make this device available rw to the user?
The default partition manager which OpenSUSE DVD 11.4 uses (Expert Partitioner) is not creating any logic partition with / mount because another system is already using it, is there anyway to fix this?
View 9 Replies View RelatedI have Ubuntu 9.10 and when i plug in my usb drive it wont mount it automatically and is not shown in the nautilus browser also, but if i search in /dev its visible(its detected) and i can mount using mount /dev/sdc /mnt But if i do this i can only copy files from browser and for all other times i need to use terminal again
View 1 Replies View RelatedI've created some encrypted partitions using Disk Utility, and would like them to be automatically mounted when Ubuntu starts up. Is there a guide to this anywhere?
I've gathered that it involves /etc/crypttab and possibly /etc/init.d/cryptdisks, but haven't had much success so far.
Ideally, some of the partitions would mount early in the boot process, while some of them can mount after I've logged in.
If I can't get this sorted, I really can't use Ubuntu so pleeease help. I'm a complete newbie, as in, about 2 hours using ubuntu so far. Generally things are going well. I am trying to create a link to my windows xp workgroup where all my data is stored (I was surprised that linux could even see it!) I mounted a volume on the desktop apparently... that worked fine until I rebooted and it had disappeared. it was fairly annoying that I had to go back into the network and re-mount the volume. How can I get it to stay put, even after rebooting? I have limited to zero knowledge of linux/ubuntu so you may need to break it down for me.I tried using 'Storage Device Manager' as someone suggested but emmm I didn't understand a word of it. In fact there weren't many words. Only acronyms
[URL] I don't understand it at all...
I just formatted my iomega 250 gb external HD to ext3. This is where i store media, such as music. What I am attempting to do is take all the music from my 5th gen 80gb ipod (rockbox firmware), and transfer it back onto my external drive, as all my data was (naturally) erased during the format. However, as soon as I plug in my ipod it mounts as usual... but after about 15-20 seconds my external drive unmounts. When i do a 'sudo mount dev/sdc1' it says sdc1 does not exist. How can i fix this? what is the problem? I have my ipod set on /dev/sdd2 and the external drive at /dev/sdc1, each with their own mount point. They each work perfectly independently. I have tried switching usb ports around and rebooting.
View 3 Replies View RelatedIt i plug the pendrive or insert cd to cdrom it will be automatically mounted. How would i do this?
I don't want to mount these manually from terminal.
I'm trying to automatically mount a windows share in a Fedora 12 instance (FC12).When I manually mount things work:mount -t cifs //nas01/servers -o username=guest,password=myPassword /mnt/nas01/serversIf I update /etc/fstab with the following://nas01/servers /mnt/nas01/servers cifs username=guest,password=myPassword 0 0Nothing happens after reboot. The thing that has me baffled is after a reboot if I run:mount -aThe share is mounted.
View 3 Replies View RelatedWhen I mount an external usb drive on linux (CentOs4), the permissions are by default set to read-only. Since there are multiple users on the computer who need to use the external drive, I want everybody to have rw permission for the entire drive. I also want them to be able to mount the drive if the computer has accidentially been shut down. They can use sudo mount to mount the drive, but this will only give them read permission, and I obviously don't want to allow sudo chmod.
Is there a default setting that I can change so that every new external usb disk automatically gets rw permissions?
Fairly new to Ubuntu (started with Karmic), now dualbooting Lucid and Windows 7. Lucid is automatically mounting my NTSC partitions, which is pretty convenient since I store all my media there, but I recently deleted one of the partitions and just extended the other one. Now Lucid is still trying to automatically mount the partition that no longer exists and giving me an error message every time I boot up. Not really a big deal, just a minor annoyance, but I'm wondering what I do to make it realize the partition is gone.
View 7 Replies View RelatedI want to mount partitions automatically after starting computer...currently i hav to click on the partitions and mount them.
View 9 Replies View RelatedI want the following behavior in kubuntu 9.04 when I plug a device (USB stick or CD disk):
1. It should be mounted automatically for me. Now it isn't, though it appears in fdisk -l output: Code: Disk /dev/sdd: 8006 MB, 8006926336 bytes
16 heads, 32 sectors/track, 30544 cylinders
Units = cylinders of 512 * 512 = 262144 bytes
Disk identifier: 0x9b12d290
Device Boot Start End Blocks Id System
/dev/sdd1 * 16 30544 7815232 b W95 FAT32 and if I mount it manually, all goes OK
2. If I mount manually my CD disk and then press the eject button on my drive nothing happens until I manually unmount the drive. But I want it to open immediately
All this worked for me in kubuntu 8.10, and broke with the upgrade.
My fstab entries Code: /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/sdc1 /media/usb vfat noexec,codepage=866,utf8,nosuid,nodev,quiet,uid=1000,gid=1000,umask=077,user 0 0
I have dual boot on my laptop. First OS is Windows XP and second is Ubuntu 10.10.
When I click on places menu in Ubuntu, I can access Windowz XP Drives.
If I access some pdf file or document while in Ubuntu which is in Windows XP Drive, then it will come in Recent Document in Places menu.
Now I restart Ubuntu and click on Recent Documents and click on the document which I accessed in last session ( before restart ).
It says Unable to Open Document.
Then I click Places again and access my Windows XP drive. Then again I click Recent Document and click on document, I am able to open the document.
My guess is this happens because my windows drives are not mounted automatically when I start Ubuntu. How can I mount Windows drive automatically when I start Ubuntu.
I have various drives and partitions that I have been mounting through fstab, but sometimes I had to do it manually, but now, I can't get them to mount at all. At first I thought it might be a disk failure, but booting to a Live CD shows all the drives working fine. when the entries are added into fstab, $mount -l shows them as mounted to their relevant mount points, but the data does't show in either terminal or dolphin?
Typing $umount /dev/drive always returns /dev/drive not mounted.
When I comment out the entries in fstab and reboot and try a manual mount, I always get /dev/drive already mounted or /mount/point busy. $mount -l does not show any mount entry points for the drive. My /home/user partition is now full as I can't save data on the other drives, so I don't know if this is an issue. Also I use a mixture of encrypted partitions and non encrypted partitions, but this wasn't an issue before. Checking some of the logs didn't show any errors. The problem seemed to start when gdd was saving data to a partition mount point I thought was mounted but wasn't. I have since removed that data and even created a new mount point.
I have come across the following statement: " When a FAT32 partition is mounted at '/media/windows', all access to '/media/windows' and everything below it is transparently handled by the Linux kernel using the 'vfat' module. Applications need not know they're dealing with anything else. However, mounting a partition at a location inside of another mounted partition is unpredictable, unstable, and generally a bad idea. "
Is it correct? Most of my partitions are mounted on /home, which is on a separate partition; and I have one "level 3" partition. I have been using Ubuntu for nearly three years so far with no problems (except for /home losing it's format once).
I'm having difficulties mounting an FTP address to my file system automatically during boot. After a bit of research I have discovered a package called curlftpfs, I've installed this package using aptitude and I had no errors.
I've successfully mounted an FTP address manually using curlftpfs at the command line and proved to myself that this is working as it should...However, I can't get this to mount automatically and I am receiving the following error during boot when I try and mount it through /etc/fstab...
Error connecting to ftp: Failed to connect to (IP address of server): Network is unreachable
My research indicates this package should be able to do this.
I'm still a learner when it comes to Linux, but could this be because TCP/IP services are not started at the time of mounting the filesystems? I've tried a continuous ping at this computer whilst it is booting and I don't get a response until after /etc/fstab has been processed. If this is the reason, can I start them these processes earlier?
Another option would be to have a script/command run when the computer boots, but prior to MySQL loading. If this is possible, it would also satisfy my problems.
I've got a removeable disk which I want to mount on startup automatically at mountpoint "/backupsystem". If' it's not there I would like to have no error message. Actually after upgrading to 10.4 I get the message: Continue to wait; or press S to skip mounting or M for manual recovery.". But I don't wand this if the disk is not there that's OK for me. How would I configure fstab to achieve this?
View 2 Replies View RelatedI am having permissions errors every time I try to mount a windows host. I have a linux server and all the windows computers can see that computer and its files, but we wanted to start backing up the linux machine to one of our other computers. so I tried to mount one of the computers. here is the sequence of events:
Code:
$mount -t cifs //192.168.1.194/Admin$ /mnt/Anita-comp
password: (I have no password so I left it blank)
Mount error (13): Permission Denied
I tried all sorts of passwords we use around the office and none of them worked.
I then decided to try mounting one of our other computers. this one looked like it worked fine. no error messages at all. (I left password blank) so I look in my filesystem and the mounted drive is not in the /mnt/Anita-comp file. What gives?
I have a netbook running Ubuntu Netbook Edition and I would like a USB flash drive to be automatically mounted whenever I plug it in. The drive is FAT formatted. It mounts when I plug it in but all files are only writable by my user, other users only have read access. I understand that I need to add a corresponding entry to the /etc/fstab file. I've added the following so far:/dev/sdb1 /mnt/USB_DRIVE vfat
Firstly, is that appropriate so far? I've created /mnt/USB_DRIVE as root. Next, I'm not sure what options I should be finishing the line with, especially to get all users to be able to write to the drive.
I've migrated back to Fedora as I am just displeased with the majority of debian based distros and Sabayon at the moment. Fedora has grown up quite a bit since FC9 and I'm here to stay. I keep all of my media and documents on a seperate partition on my disk and am wondering how I can have it set to automatically mount it upon startup. It gets kind of annoying having to re-enter my password every reboot just to mount the partition that 90% of my time is spent on.
View 4 Replies View RelatedI have the swap partition configured normally in fstab but it doesn't automount when I boot up. Not only that but I can't manually mount it either (ie with 'swapon -a', 'swapon -L /dev/sda7' etc). When I try I get this error -
Code:
[spoovy@kermitfed ~]$ sudo swapon -a
swapon: /dev/sda7: read swap header failed: Invalid argument
fstab -
Code:
/dev/sda7 swap swap defaults 0 0
The swap partition is used by another installation (Ubuntu dual-boot), which mounts it fine each boot.
I have an external Western Digital Hard drive with two HFS partitions with journaling disabled.When I connect it to a computer running Linux (Debian or Ubuntu), frequently both partitions are mounted read-only. In the past, mounting them on my Macbook and executing the command to disable the journaling often worked (even though it would tell me that journaling was already disabled) but I would love to have a solution which works every time.
View 1 Replies View RelatedI have a dedicated server that Ubuntu 9.04 operating system has been installed on it. Before this dedicated server, I had another server that according to some reasons, it was put aside and I requested my datacenter support team to attach previous server's HDD to my new server in order to transfer its information to the new server's HDD. On the disks of previous HDD, Ubuntu 8.04 LTS OS had been installed and most of its capacity was full, but while I mounted that HDD on the new server, the contents of the primary partition were visible but the contents of the extended partition weren't visible. After some inspectings, I observerd that the extended partition type is converted to LVM. Before this, I didn't deal with this kind of partition. I tried to mount this partition but I failed. I read many articles about this problem and implemented instructions on the HDD but the LVM partition was never mounted that returns many different errors and even I pursued the reasons of this errors but non of these remedies didn't solve this problem. Since the datacenter had determined a specifies time for transfering information. then I had to return the SCSI HDD on the specified time, so I was forced to make an image of the hard disk by "TestDisk" software. I've made that image from the LVM partition which its capacity amounts to 150 GB but still I'm not able to mount the image according to instructions on the different related websitres. Since I'm really dummy in Linux Fle System field, I request you to help me to mount this image or extract its contents.
View 1 Replies View Relatedhow to make my other partition mount at Ubuntu startup? I have a shortcut to my windows XP documents folder, but the shortcut is broken every time I restart because the other partition has not been mounted. I assume there is a terminal command I need to type into my start-up manager?
View 9 Replies View RelatedUbuntu has been complaining about swap not being ready during boot. The swap partition was showing up un-known in gparted. I booted off CD, reformatted it to swap. Error message gone but system monitor > resources shows my swap size to be 86GB (the exact size of my shared NTFS volume). gparted shows the swap partition as not 'swapped on'
I am running Ubuntu 11.04 along side Windows 7 (as well as my factory restore partition) and an NTFS shared partition.
My partition structure in order of location on disc. Screen shot below to help.
sda1-2 Windows 7
sda4, extended partition
--sda6 Ubuntu
--sda7 swap
--sda5 NTFS shared partition
sda3 Factory restore image
I wanted to know if it is possible to mount an ISO image to a partition and boot from that instead of a CD or DVD. I know it is easy to do it from a CD but I would like to know if I can also do it this way.
View 3 Replies View RelatedHow to mount ntfs partitions into red hat linux. I'm trying to mount but not mounted that
View 8 Replies View RelatedI want to mount my all windows partition in my "Red Hat Linux", please help me to mount all my windows partition in linux.And please tell if i mount windows partition is it harmful for windows/partition?
View 3 Replies View Related