When I do ifconfig than IPv6 address is appearing on an interface. However when I run the system-config-network and select to edit same interface than it shows the normal ip4 192.168.1.x address. Why is it like that? ipv4 at one place and ipv6 at other?
View 3 Replies
I have been struggling to get FC15 to act as an IPv6 router for a while now, am sure I am missing something trivial.. The idea is that I have a ppp / adsl connection (this works fine), use the wireless card on my pc with hostapd and dhcpd to provide connections to other pcs (works fine), and radvd to delegate ipv6 addresses.
The issue seem to be that as soon as I turn on ipv6 forwarding (net.ipv6.conf.all.forwarding =1), the ppp connection no longer gets an IPv6 address. This means the router cannot ping any ipv6 address outside my network.
If I disable ipv6 routing, my router gets an IPv6 address on its ppp connection, and can ping things such as ipv6.google.com just fine, however (of course) no packets are forwarded from my network and radvd complains that forwarding is disabled.
I have a problem with my ipv6 connection: although I can't get ipv6 address with DHCP, I can't use ipv6 network. I tried [URL], and the tortoise is static. I want to fix it out , so I use 'ifconfig' to see my network configuration:
eth0 Link encap:Ethernet HWaddr 00:50:8d:ef:dd:06
inet addr:210.77.9.102 Bcast:210.77.11.255 Mask:255.255.252.0
inet6 addr: 2002:d24d:b64:4:250:8dff:feef:dd06/64 Scope:Global
[code]....
Some people told me that the fisrt ipv6 address was wrong and unsuitable for ipv6 connecting. I tried /ect/init.d/networking restart but it didn't work. How can I use the second address as my ipv6 address and fix the problem out ? Now it seems there is not problem with the ip adress but the route. After watching some video, I suddenly could use ipv6. I did 'ifconfig' again and nothing was different. However, the result from the command 'ip -f inet6 route' changed: the last default route was gone and there was only one default route.
When I run OpenVPN server - tap0 adapter, it breakes Teredo(Miredo) IPv6 address down. I dont need IPv6 on OpenVPN, so is there any way to disable IPv6 on tap0 completely?
View 2 Replies View RelatedI have a networking problem with my computer. Under Windows, the computer can get both v4 and v6 address via DHCP. However, the same computer can only get v4 address under Ubuntu. Does anybody know how to solve this problem?
View 3 Replies View RelatedI have a host and typing ifconfig I get:
eth0 Link encap:Ethernet HWaddr 00:0E:7F:4F:E4:09
inet addr:130.130.9.9 Bcast:130.130.255.255 Mask:255.255.0.0
inet6 addr: fe80::20e:7fff:fe4f:e409/64 Scope:Link
[code]...
and to do a test i want to disable or delete the ipv6 address, but mainteining the other configured parameters. Looking on the ifcfg config file I have
DEVICE=eth0
BOOTPROTO=static
BROADCAST=130.130.255.255
[code]....
and nothing about IPv6... Then, using ifdown-ipv6 could i remove only the ipv6 address?
I have retrieved IPv4 address successfully using
Code:
struct ifreq ifr;
fd = socket(AF_INET, SOCK_DGRAM, 0);
ifr.ifr_addr.sa_family = AF_INET;
ioctl(fd, SIOCGIFADDR, &ifr)
for IPv6 address I tried
[Code]....
I have an Ubuntu 10.04 server/router with IPv6 internet connectivity (I have an internet routable /64 subnet). Since I have this abundance of IPv6 addresses I wanted to try and assign v6 addresses to specific users on the local system. I've been looking at ip6tables with packet mangling but I don't seem to be able to find out how to do this or if this is even possible.
Current configuration: eth0: Local network, has the /64 IPv6 public range active and the IPv4 LAN range. tun0: 6in4 tunnel with a ISP assigned public v6 address. eth1: Standard IPv4 internet connection.
All users on my system use the v6 address configured on tun0. I want to force them to use the /64 range which is configured on eth0. If I can force users to use a specific v6 address, I'll configure more then one v6 address on this interface based on the users userID on the system.
I've two WLAN AP's with both a different IPv6 subnet. When I change from one AP to the other, my IPv6 Global address stays valid and so is the default IPv6 gateway. After a while I get another Global address from the second AP's subnet and another default IPv6 gateway for the second subnet. Both have the same metric. IPv6 connectivity is broken now. When I disable wireless on the laptop and reenable it, it flushes all IP addresses and receives new ones and connectivity is restored. Does anyone know if this is normal behaviour or should it normaly flush all the addresses when changing network? It's a bit silly to have to disable/enable wireless all the time..
View 4 Replies View RelatedI addes IPv6 address to my interface as
Code:
ifconfig eth0 inet6 add 3fff:ffff:6:5:4:3:2:1
But, when I restart the network service this IPv6 address is gone. How could I make it as a permanent IPv6 address( that should be edited or deleted when I want but not when I only restart the network)to my interface?
I added an init script numbered just before bind9 starts, which needs to see the ipv6 link-local address on eth0. Sometimes this address is not configured, yet. In all cases it eventually is configured.
I am unable to find any script that is configuring the ipv6 link-local address (which is in part based on the MAC address). Does anyone know if there is some script or program that is supposed to be doing this, or is it an internal kernel function?
One workaround I am considering is making this init script go into a loop around sleep 1 to keep checking for the ipv6 address. But I'm concerned this might cause some problems. Any suggestions? I don't want to let it move on to start bind9 until the configuration this script does (more ipv6 addresses) is done.
This is on Ubuntu 9.10 server (for which there is not a prefix choice).
I can reach other hosts by means of their global addresses by either the IP address or hostname (that has the global address). What I want to (also) do is have a hostname that references the IPv6 link local IP address (an AAAA record in DNS, or just the fe80::<whatever> address in /etc/hosts) and use that host name in commands to access that host. The problem is, an interface ID is needed when making such a reference.
It sure looks like the programs just pass the host name string on to the resolver library, which does not understand the significance of the '%' even though it could find and see that the name preceding the '%' is consistent with that being an IPv6 link local address (e.g. the logic could have been "split at first % and see if preceeding name is found as a link local address and accept that if so, or ignore the split otherwise" ... but it isn't). Is there a different syntax for this ... or was it overlooked in the design of programming around IPv6?I want to be able to address a host by its link local address, while still using a mnemonic instead of having to type the IPv6 address.
Im trying to achieve the multiple uplinks/provider found on LARTC.org. I have to get the IP addresses from my interfaces (EF1 and EF2) by using a script, but i dont know where to look at for the default gateway from each interface which got their ip address from my ISP.
View 1 Replies View RelatedI recently just upgraded from humble Linux user to confused Linux admin of my own virtual Linux server. When I issue the ifconfig command I get following output.
Code:
venet0:0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:1.2.3.4 P-t-P:1.2.3.4 Bcast:1.2.3.4 Mask:255.255.255.255
UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
The WAN IP of the interface is not really 1.2.3.4 I just changed that IP for security reasons.What I am trying to figure out, is it possible to assign a private IP address to the same interface or can I only have one IP address per interface. I understand I have a mask of /32 so I am not going to be able to subnet the address to create any more addresses, so I assume I am stuck with the WAN IP (public IP) that I have, and just need to deal with it.
The reason I ask this is because I have been reading through several DNS/BIND tutorials/walk-throughs, and a lot of them specify setting up a intranet access with 192.168.1.1 address for the local DNS server, but since I am connecting to the sever via SSH I figure I do not need a private IP address.
Showing my ignorance, but why would this work
address 172.16.1.8
netmask 255.255.254.0
network 172.16.1.0
broadcast 172.16.2.255
[Code]....
Notice the 2 in address. Seems to me it doesn't like the network and wants it to be 172.16.0.0, but I am adding to a network already configured this way.
how to do a virtual interface under linux. I'm using for example eth0:1 so ifconfig eth0:1 192.168.0.20 netmask 255.255.255.0 for example.
However if i do eth0:1 hw ether 00:11:22:33:44:55 It changes eth0 as well. Where should i look into for creating a separate virtual interface that's simply bridged with one of the existing interfaces that has a separate ip and hw address that the os handles.
Is there possibility to disable ipv6 protocol for given interface? More info:
1. I have PC with 3 Ethernet cards. Two of them up(eth0, eth1), other is down(eth2).
2. eth0 is connected to LAN, so it configured to obtain IPv4 address via DHCP(works)
3. eth1 is connected directly to other Ethernet card in other PC and used by packet generator(tcpreplay utility) in debug purposes. ipv4 is not configured on this interface.
4. I have rebuilt kernel with build-in ipv6 support, because it required to work in LAN with some other PC's.
5. Now all my interfaces got own link-local ipv6 address(like fe80::xxxx:yyyy:zzzz:qqqq )
How to get rid ipv6 on my eth1 debugging-interface? Any unauthorised packet send thru interface wastes whole debugging session. "ifconfig eth1 del " doesn't helps. Can it be achieved using tools available in slackware 12.2 or at least slackware 13.1?
Someone just erased my HWADDR line from /etc/sysconfig/network-scripts/ifcfg-eth0. How can I obtain my original MAC address?
Code:
ifconfig eth0 does not work (it shows the wrong MAC address) since the HWADDR line from the file I mentioned above was erased. Also there is no ifcfg-eth0.bak backup configuration file.
I used to play with gw6c ( a client for tunnel broker ) It works well with fedora9 , fedora 10, but not with leonidas. my rpm is gw6c-6.0-0.4.beta4.fc9.i386.rpm ( a little old!) when I tried to install i have got this: libcrypto.so.7 est ncessaire pou w6c-6.0-0.4.beta4.fc9.i386 I try to make a soft link to libcrypto.so.0.9.8k, but nothing; The question :-Is there a solution for that pb - did you know a better client for non native ipv6 connectivity?
View 2 Replies View RelatedI have two network interfaces in my pc eth0 and wlan0 and a virtual one br0.
router <= eth0 (0.0.0.0) => br0 (192.168.1.10) <= wlan0 (0.0.0.0) => other pc.
On startup of my pc (ubuntu 10.04 server x64), samba bind itself only to loopback network interface, as i can see when i do netstat -an , preventing me to enter in my shares from a remote pc.
Here is my configuration regarding samba network:
Code:
interfaces = 127.0.0.0/8 192.168.1.0/24
bind interfaces only = yes
and my /etc/network/interface
Code:
# The loopback network interface
auto lo
iface lo inet loopback
code....
Any idea fo speed up my bridge configuration or to force samba to wait unitl the bridge is ready?
I want to add an ipv6 address in linux.
i am going to use the following command.
# /sbin/ifconfig <interface> inet6 add <ipv6address>/<prefixlength>
Can anyone explain how this command will works?
Is that prefix length value is fixed to 64 or is it vary?if so,can you explain how it could be?
I've registered a top-level domain site.com pointing to my IPv6 address (6to4 tunnel). Everything looks ok, dig command, nslookup command shows requested output, but: I'm not able to connect to mail.site.som on 110 port. I still get an error messaged, that connection has been refused. I've populated the ip6tables with commands to open desired port but with no success. I'm listening on 25, am able to connect to this port, but not to 110.
Command netstat -an | grep "LISTEN " shows that I'm not listening on 110 port, although I'm just added this port to the firewall exceptions. Telnet to ::1/tunneled IPv6 address is successful. Postfix installed, configured properly, ping6 working. Everytime I try to send email from external domain, I'm advised that the mail domain is not pointing to A record.
How can I validate an IPv6 address through javascript before using the IPv6 value in my cgi script?
View 2 Replies View RelatedI am trying to get the MX record using dig command supplying IPv6 address of host. but i am getting connection timed out .
while with IPv4 address and host-name its working fine.
I use DNS on my server as a chasing DNS so its not fully configured. I seem to be having trouble with IPV6 addresses. I'm guessing this is linked to the 6to4 tunnel I have set up to my windows box, but I'm not really sure.
Code:
May 21 18:00:16 hyrule named[1148]: error (network unreachable) resolving 'D.ROOT-SERVERS.NET/AAAA/IN': 2001:dc3::35#53
May 21 18:00:16 hyrule named[1148]: error (network unreachable) resolving 'B.ROOT-SERVERS.NET/AAAA/IN': 2001:500:1::803f:235#53
May 21 18:00:17 hyrule named[1148]: error (network unreachable) resolving 'zg.akamaitech.net/AAAA/IN': 2001:503:a83e::2:30#53 .....
Please send me the code how to assign ipv6 address using ioctl system call using C.
View 1 Replies View RelatedOn our Home LAN, we have several different SuSE machines running. Now, I have run into a problem which I cannot solve myself. One of the computers (a 11.2) just doesn't receive any IPv6 lease from the main router. The router has radvd running and distributes addresses to the other computers just fine. The network card on the box ist a
[Code]...
When I create virtual ethernet interface and do a ping -I <v_int> <host> the outgoing address is the one of the physical interface and NOT the virtual interface.Is there no chance that trafic will go out with virtual interface address??Incoming trafic is done well i.e. responds to the virtual interface have the virtual address.
My problem is that I have 2 modems and want to check both default gw behind the modems.
If I do a "normal" ping both are reachable over default route even the modem which is not the default route will not work because ping goes over the working modem.So I have 2 routing tables and want to route the virtual interface to one modem the other to the other modem
My ISP offers the service of native IPv6. So my ADSL router provides me with a local and global IPv6 address. However after a reboot it takes minutes to finally see the global address when using "ifconfog eth0". During that time I can't do a ping6 to an external server, which seems logical. So I waited several minutes, but no global address. After that I started a KDE session, went back to the console(<Ctrl>+<Alt>+F1) and now the global address was there. Is this normal behavior or should I file bug report?
View 6 Replies View Relatedi install kernel rpm after i boot that kernel network not working kernel name : kernel-rt-trace-2.6.24.7-132.el5.centos.i686 [URL] error "Bringing up interface eth0: Device eth0 has different MAC address than expected, ignoring."
View 1 Replies View Related
