I have a Wi-Fi connection in my home. There is a telephone through which a wire comes out, when I connect that wire with my laptop I can connect to the Internet.
Now I want to connect to the net without that wire.
Code:
linux-dpjj:/home/anisha # ping www.google.com
ping: unknown host www.google.com
Well, I followed this link:
[Code].....
I recently installed Ubuntu 9.10 on a Lenovo Thinkpad x100e and cannot figure out how to enable the wireless internet connection.
View 2 Replies View RelatedI am trying to connect my desktop to my laptop over a non-internet connected LAN, but when i enable the LAN connection on my desktop (the one with the wireless) its internet stops working.
it is a very similar problem to this except that i am using ubuntu for the machine with the two connections.
right now i have my wireless on the 192.168.1.* address space, while the LAN is to be on 192.168.5.*
note: my goal is not to share internet with my laptop, just be able to connect to it and the internet at the same time.
desktop: ubuntu 9.10 , wireless and LAN
laptop: windows xp, LAN only
I am running Ubuntu 10.10, and I would like to use my computer to share the internet connection from an ethernet port. For example, I would like to set up my computer as a wireless access point so I can create a network that other computers can connect to for internet.
View 3 Replies View RelatedI have a strange problem, I opensuse. I myself live versions on the Internet, but I'm not the version installed! I connected with usb modem.
View 1 Replies View RelatedIts a case of ".... wireless network connection active but still not internet connection .."I am using WEP - 128 key ... Works when I connect directly using ethernet cable ... but not wireless (pci and wireless router)
ubuadmin@ubucomputer:~$ ifconfig
wlan0 Link encap:Ethernet HWaddr 00:06:25:12:83:3b
inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::206:25ff:fe12:833b/64 Scope:Link[code].....
OpenSuse 11.4 Asus Netbook 1000H Following other members in the forums I have installed Opensuse 11.4 on the Netbook. In the early days Ubuntu Netbook Remix worked well for me. But this has been discarded, and the "one size fits all" Ubuntu had become slow and cumbersome. So..... onto my post. Opensuse is working well. The install went beautifully.
It detected the Wireless Internet and I am able to get on line. I also need to share the Internet connection to a desktop. This is done via a small network switch. Thus far I cannot do this. I tried to use ifup to configure a static ip but this busted my Wireless configuration. I went back to knetwork manager. Then I tried to set up the wired network using knetwork manager and under IPV4 "share" the connection. But this blanks out any possiblity of a static address and substitutes dhcp. My desktop cannot ping the this dhcp address. Ubuntu had this thing called Firestarter? - from memory. This configured the system to sharing the network.
I have installed Fedora 11 recently. I want to share my Internet connection.
I have e LAN connection eth0 which is connected to internet.
I have a Wireless connection wlan0.
I want to share my internet connection with wireless connection.
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
View 5 Replies View RelatedI tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed. I tried offline/online, that did not work either. when I click the firefox It says you are not connected.
View 1 Replies View RelatedI seem to have is trying to get the internet to work. I can go to ..... ect but when I try to run playonlinux it says you do not seem to be connected to the internet, please post if you have anything useful, as I said I am very new to linux so be as detailed as possible.
View 4 Replies View RelatedI have the "Work Offline" problem: when I boot up, the icon on the toolbar tells me I have "No network connection". This is not quite true, since I can access the first page of any website - only subsequent pages are inaccessible. I get a message saying that Firefox is offline. However, when I uncheck "Work Offline" in the File menu, it makes no difference to this behavior.
The problem is on my Ubuntu Dell desktop, which is connected to the internet with cable broadband via a D-Link router (wired connection). It has worked fine up till now. I use Ubuntu 10.04 and Firefox 3.6.11. I am writing this on my Ubuntu Dell laptop which is wired to the same router, so I assume the problem is not the router. I have tried various strategies suggested in threads on these forums, including editing about:config, changing "allow" to "deny" in some lines of /etc/dbus-1/system.d/NetworkManager.conf and changing from Automatic (DHCP) to Automatic (DHCP) Addresses only, but no luck so far. The contents of ifconfig are:
eth0
Link encap:Ethernet HWaddr 001:aa0:91:a7:51
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets: 0 errors: 0 dropped: 0 overruns: 0 carrier: 0
collisons: 0 txqueulen: 1000
RX bytes: 0 (0.0 B) TX bytes: 0 (0.0 B)
[Code]...
If I comment out "auto eth0" as well, it makes no difference. If I uncomment both lines ("auto eth0" and "iface eth0 inet dhcp") then I lose the internet connection altogether.
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
I have installed fedora 12 recently. after installation i tried to connect to the internet using BSNL broadband connection. I filled in the details such as IP, Netmask, Gateway and even DNS servers. In the services also I ensured that the network manager services is on. However even though my computer cannot connect to the internet. I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual.
There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
[Code]....
I then tried the ping test of the modem from the address 192.168.1.1 and found that the ping test is successful. Then i tried the network administrator and there I noticed something unusual. There are two options in the devices eth0 and eth1 thats ok but the unusual; thing is that the Activate (green button), Deactivate (red button) and even the delete buttons are in the background and I cannot select them. Isthis the problem for the network connectivity.
I just installed Ubuntu 11.04 desktop on my desktop in dual boot with Windows 7.
Heres my problem, I am unable to connect to the Internet even though my wired Ethernet connection says it is connected normally. The wierd thing about this is that I also have a wireless card in my desktop and when I connect through that I am able to connect to the Internet. I am connecting to a router that is functioning as a repeater to my main router/cable modem. I have tried to solve this myself but am having no luck. Ironically, earlier today suddenly my ethernet connection worked for a few minutes without me modifying anything.
The output of some terminal commands are below.
Quote:
Quote:
Quote:
However a pint to that ip address (my router) is successful.
Quote:
Hosts.allow and hosts.deny are both fine (not blank but no entries)
It is just 3 days that I am using Linux Opensuse 11.2. I got a problem with Internet connection: I have HUWAEI E1550 3G Modem, but I have no idea about using it on Linux OpenSuse 11.2. Now I use it Windows7, there is no problem, because there is a program and driver for modem.
View 1 Replies View RelatedI have bought a TV which has possibility to connect via LAN to Internet. At this moment I have no router but I suppose it should work also via PC where is 2nd net card. (of course PC must be ON)
So I connect TV to PC to one net card and from 2nd to internet (provider socket). But how should I set the PC to work it? Allow both cards, it is clear but is it enough? I dont suppose
PS: if important, KDE and oS 11.3
I m trying to get internet connection via wireless on Suse 11.4. Although ifstatus eth1 reports an IP address (and router reports a wireless connection) no Internet access is possible, which seems very strange (including the admin page of the router).
[Code]...
I just downloaded openSUSE 11 but I don't have an internet connection. I thought that it will find my cable connection automatically like Ubuntu does, but it didn't. It doesn't have a normal network configuration set-up, there is nowhere that it even gives me a choice to select local internet connection or a cable connection. What do I have to do to set it up.
View 3 Replies View RelatedI'm using ubuntu 10.04 dual boot with windows xp. Recently I'm having problems using the internet, I can connect to our wireless network but can't use the internet, firefox just says error on opening the page. But when im in windows xp i can surf and use the net. Is their a way to diagnose whats causing the problem. I use a Realtek RTL8187 wireless lan, it works fine before its just now that its not working with ubuntu.
View 4 Replies View RelatedI installed ubuntu 10.10 with windows 7 (dual boot) in my fujitsu lifebook. I use zoom ultra by Sentar EVDO MODEM ST880U. I tried pppoeconf or DSL or mobile broadband but fail to connecte internet. In first exprience on ubuntu 9.04 same via dell latitude with Huawei EC123 Data card.Any one can assist me to overcome the bad condition to like ubuntu as on offline mood in my work zone.Actually i used ubuntu 9.04 for my offline work in Dell. Now also same condition starts. Please help to come internet and enjoy ubuntu.
View 2 Replies View RelatedOS is Ubuntu 10.04. I have HomePNA-connection which is converted to Ethernet by Netsys NH-300 HomePNA-Ethernet adapter.
The problems that I have: Sometimes when I boot I don't get IP from DHCP. If try to ping any address I am told that host is unreachable. Sometimes this I can get IP by using command dhlient -r and dhclient to request new ip. Sometimes only way to get my connection to work is booting the computer.
Sometimes the connection works fine from the start but disconnects later for short time. Sometimes this happens every ten minutes, sometimes less often. If I wait for a while the connection might start working again, if not dhclient -r or reboot helps usually. But not always.
I'm trying to setup network server for a week now and I was able to setup network in which i can ping the other workstation that is connected to my switch which is also connected to my server and I can also ping the server from local workstation.
I have 2 NIC, I use eth0 to dial to my dsl connection(ppp0 has the IP of my internet) and I use eth1 to connect to the switch and use to connect to the other local workstation
Now my problem is I don't know how can I share the internet connection from my eth0 or the ppp0 to my eth1 to the network, what do I need to be able to share the internet connection to the workstation that is connected to my switch.
PC :Personal Computer
ISP : Internet Service Provider, which gives the IP Address to the PC under him.
Suppose I have PC-A running under ISP-A and another PC-B running under ISP-B. Both PCs A, B are running in different cities. Now Im running an application on PC-B which listens for the messages that should be processed and PC-A want to send to messages to the application listening on PC-B. For this situation how does PC-A does connect to PC-B i.e. what is the IP Address of the PC-A to get connected. Do I need to give IP of the ISP-B.
I was away for about a week, and on being back home I got on my notebook MAC but to find my MAC could not get to the internet! The Modem and the router were already switched on. Usually, this gave no problem. However, this time after repeated tries I was very sure something must be wrong. To cut the story short I managed to find a friend who knows another guy who is a qualified computer techy. He actually helped reset the whatever settings and upon getting it all done I asked what was the root of the problem. His explanation was "things like this does happen and we need to reset the system".
Just to make sure I will not need to bother my friend and his friend should thing like this crop up again, I really appreciate to get a guide on what you actually do to reset whatever that needs to be reset.
I have ubuntu 10.10 server with a web site I am mess up in NIC configuration. I have only one web site on my server. I Have 2 Internet connection with static IP. I have 2 Network Card as follow eth0 119.155.152.140 (1st internet with static IP without firewall) eth1 203.135.30.240 (2nd internet with static IP without firewall) when i restart my networking it give me following error
Code:
shah@server:~$ sudo /etc/init.d/networking restart
[sudo] password for shah:
* Reconfiguring network interfaces...
[code]....
For any distro, via CLI and configuring config files, without using graphical tools. Or there have to be different?
View 1 Replies View Relatedi ve installed RH-5,xp in my desktop(dual boot), my xp internet works well, recently i installed RH & want to setup internet conn in RH.
View 3 Replies View RelatedI know, that this thread is old one, but I am having the same issue. It does not seem to me to be the problem of single torrent. It is more the way how much do I use my connection. If I have only 1-2 torrents, everything is ok. If I have 10, I get this problem. It is also followed by aprox. 30 secs of no internet connection. I use Deluge for downloading and my limits are set like this:
max connections: 200
max upload: 300 KiB/s
max upload slots: 5
max connection attempts per sec: 20
The connection outage is really annoying.
I use Slackware 12.1 and I have a big problem that I can't solve by myself. I'm connecting to a LAN where there are almost 20 PC connected, all with static IP.
my ip: 192.168.1.205
netmask: 255.255.255.0
gateway: 192.168.1.1
DNS server: 80.58.61.250, 80.58.61.254
I configured manually it but it doesn't works well. I set up the DHCP server on Windows 2003 so I tried to configure it with dhcp too. It gives addresses from 192.168.1.200 to 192.168.1.240 there are no PCs connected with DHCP at the moment, so my IP is only mine.
My problem is the following:
bash-3.1# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1e:68:3d:1b:ad
inet addr:192.168.1.201 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::21e:68ff:fe3d:1bad/64 Scope:Link
Up Broadcast Running Multicast MTU:1500 Metric:1
RX packets:77 errors:0 dropped:0 overruns:0 frame:0
TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7041 (6.8 KiB) TX bytes:6282 (6.1 KiB)
Interrupt:17 Base address:0xc000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1810 errors:0 dropped:0 overruns:0 frame:0
TX packets:1810 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:90500 (88.3 KiB) TX bytes:90500 (88.3 KiB)
bash-3.1# route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
localnet * 255.255.255.0 U 0 0 0 eth0
loopback * 255.0.0.0 U 0 0 0 lo
default 192.168.1.1 0.0.0.0 UG 1 0 0 eth0
bash-3.1# ping www.google.es
PING www.l.google.com (66.102.9.99) 56(84) bytes of data.
64 bytes from 66.102.9.99: icmp_seq=1 ttl=243 time=78.7 ms
64 bytes from 66.102.9.99: icmp_seq=2 ttl=243 time=84.2 ms
64 bytes from 66.102.9.99: icmp_seq=3 ttl=243 time=75.1 ms
64 bytes from 66.102.9.99: icmp_seq=4 ttl=243 time=82.1 ms
64 bytes from 66.102.9.99: icmp_seq=5 ttl=243 time=82.8 ms
64 bytes from 66.102.9.99: icmp_seq=6 ttl=243 time=79.4 ms
64 bytes from 66.102.9.99: icmp_seq=7 ttl=243 time=82.3 ms
64 bytes from 66.102.9.99: icmp_seq=8 ttl=243 time=75.2 ms
64 bytes from 66.102.9.99: icmp_seq=9 ttl=243 time=80.7 ms
64 bytes from 66.102.9.99: icmp_seq=10 ttl=243 time=84.7 ms
64 bytes from 66.102.9.99: icmp_seq=11 ttl=243 time=75.0 ms
64 bytes from 66.102.9.99: icmp_seq=12 ttl=243 time=82.2 ms
64 bytes from 66.102.9.99: icmp_seq=13 ttl=243 time=85.1 ms
64 bytes from 66.102.9.99: icmp_seq=14 ttl=243 time=80.9 ms
64 bytes from 66.102.9.99: icmp_seq=15 ttl=243 time=87.7 ms
64 bytes from 66.102.9.99: icmp_seq=16 ttl=243 time=87.6 ms
64 bytes from 66.102.9.99: icmp_seq=17 ttl=243 time=83.2 ms
(...)
- www.l.google.com ping statistics -
49 packets transmitted, 48 received, 2% packet loss, time 560804ms
rtt min/avg/max/mdev = 73.624/80.945/87.725/3.823 ms
It takes a lot of time connecting to a internet web site! It's really strange because downloading a file the transferring rate is good, it takes some time starting, but it works normally. I wait almost 7 seconds after seeing a web site. All the others PC's (windows xp) can connect perfectly to network using static and DHCP. Trying with another wire in another room I've got the same result. My /etc/resolve.conf is configured with the IPs specified upper in this page.