Networking :: Bridging Wireless To Wired?
Aug 22, 2010
I am trying to share my internet access using the following setup.
A Linksys WRT54G v5 router that is connected to my cable modem in my basement. I want the signal to be picked up by my Hawking HWABN1 and sent through a Linksys BEFSR41 to my Ubuntu desktop running 9.04.
I'm pretty sure the Hawking is receiving the signal because when I check the devices in the wireless router setting the IP shows up. I can't seem to get anything whether it is hooked up to the BEFSR41 or straight to the desktop and Ubuntu tells me I'm offline and I'm not getting an IP.
I have a WinXP laptop that I have used to run the Hawking setup and it is supposed to be accessible through a web based interface similar to the routers.
View 5 Replies
ADVERTISEMENT
Feb 11, 2011
Here's the story running 10.10 on my box with a wireless N adapter I'm about to go get a XBox with the built in wireless but the problem is that the XBox does not pick up 5ghz. Any way to connect the XBox with a ethernet cable to my motherboard and bridge those connections so the XBox can get network access?
View 1 Replies
View Related
Apr 1, 2011
My laptop, which is my main machine, is running Ubuntu 10.10 I am bridging my wireless connection on my laptop to my Dell desktop; but I have somewhat of an issue. I was able to bridge the connection with ease, but the IP the XP machine has been assigned is not in my subnet. The issue is that I need to port forward to this machine, but my router doesn't recognize that the PC is on the network because it has a random IP. I've tried assigning a static IP on the XP machine itself, but it doesn't change...
View 2 Replies
View Related
Apr 29, 2010
I have a Dell Studio 1501 Laptop and I want to bridge the wireless with the ethernet port so I can hook my xbox360 to my laptop.
I've spent the last 2 hours trying different techniques but nothing is working.
I'm running Ubuntu 9.10 so the last thing I tried was going into the network manager, clicking on wired, editing the ethernet port and allowing it to share. This did nothing.
I tried to share the connect with firestarter but that did not work either.
View 2 Replies
View Related
Aug 11, 2011
I dont know if its possible or not ? I'm using 3G dongle (ppp0 interface) for connecting to internet on my laptop running ubuntu 11.04 , now i want to share this 3G connection to my wireless router(Trendnet TEW-652BRP) through eth0 interface in simple my connection should be like this
INTERNET<<<3G WIRELESS MODEM<<<LAPTOP----WIRED CONNECTION TO WIRELESS ROUTER<<<OTHER DEVICES (LIKE ANDROID MOBILE/LAPTOPS SHOULD CONNECT THROUGH THIS WI-FI CONNECTION)
View 9 Replies
View Related
Jul 9, 2010
I want to connect my modem straight to my fedora 13 box, using it as a firewall, and I want to use my wireless card to set up an ad-hoc to give internet to the windows computers in my house. My router has been messing up and I am trying to create a quick fix until I can solve the problem.
My eth0 has internet connectivity but when I use the brctl command to try to create a bridge it doesn't let me add my wireless card, wlan0, and also I lose internet while my eth0 is in a bridge. I am fairly new to Linux.
View 2 Replies
View Related
May 11, 2011
I'm trying to set up a wired/wireless linux router. it wirelessly connects to a network, then is wired to the internet port on my netgear wgr614.
eth0 (wireless) is dhcp
eth1 (wired)
The router
Internet port is static
And local network
I turned forwarding on, set the iptables for masquerade and nat, but i'm not really sure what i'm doing wrong. any pc connected to the wrg614 can see the pc thats supposed to be forwarding packets but can't see any further(the other router at 192.168.1.1 or the internet).
My sources sofar are:
[url]
[url]
View 5 Replies
View Related
Mar 18, 2010
I have Ubuntu 9.10 installed on a VM Server 2.02 with a Win7 32 bit host. When the host is wired into my network, the Guest (Ubuntu) has internet conductivity. However when the host is connected via Wireless, the Guest Does not have any internet connectivity. The VM Network connection is set to Bridged.
View 1 Replies
View Related
Apr 1, 2010
in short : installed 9.10 on a dell inspiron 600m which has a broadcom bcm4401 ethernet and an intel PRO/Wireless LAN 2100 3B mini PCI. At this point, i'm not too picky about which one works (meaning neither of them currently work). nm-tool seems to pick up on both : the broadcom (eth0) is using the b44 driver, State is unavailable; the intel (eth1) is using the ipw2100 driver, it's State is disconnected.
i have encryption turned off, and the wireless sees a number of AP's (including mine).
i'm jumping off the good ship m$ and determined to make this work!
View 3 Replies
View Related
Apr 30, 2010
I just did a fresh install of ubuntu studio 10.04 and I can not connect to either a wired or wireless network. The In Network Tools the IPv4 IP address is 127.0.0.1. It is plugged into a network giving out DHCP IP's. Both wired and wireless were working on ubuntu 9. I have tried to bring eth0 up in the terminal but it did not give an error or anything. It it running on a Dell Latitude D820 laptop.
View 3 Replies
View Related
Aug 7, 2010
when i'm connected with wired (eth0) to my access point vpn connection connect flawless but when connect with wireless (eth2) to the same access point vpn connection failed i don't know whats the deal. i try disable eth0 (ifconfig eth0 down). it's disabled now but vpn connection still didn't work
View 5 Replies
View Related
Aug 9, 2010
I dualboot Win7 and Ubuntu 10.04 for quite a long time now with no problems.... but now wireless works perfect on Win7, but I can't even connect Ubuntu with a direct wired connection.... ubuntu connects to the actual Linksys Wireless router just fine, but just won't take the internet, and I've tried two different Wireless cards.this all started (I dunno if its relevant or not) when I put in a new TV tuner, which I obviously took out right away. But the problem is still there. I don't think its the card, I'm pretty sure its just some kind of setting that I've messed up or something because when I connect to the network its near 100%.
View 1 Replies
View Related
Sep 9, 2010
I have installed Ubuntu 9.10 twice on two different laptops that had wireless cards that weren't working until I sudo apt-get update(d) them. After that, the wireless cards seem to miraculously work. But I was able to download them because they had working ethernet cards.
I'm working on a new laptop (Dell Inspiron 1150). I installed Ubuntu 9.10 like normal but I could not get a wired connection. I plugged in directly to my modem and it still cannot connect at all. It says that Auto eth0 is available, but it tries to connect but can't seems to make it. I downgraded to 9.04 to see if there was any changes, and there aren't. The same problem persists.
What's my next step to troubleshoot?
ifconfig:
Code:
lshw -C Network:
Code:
View 1 Replies
View Related
Sep 27, 2010
I'm running Lucid 10.04 on a Dell Studio 15. I first noticed it today, but it could have been happening for a couple of days. I get no IP address for my wired connection when running ifconfig. Wireless is connecting perfectly. Normally when I start up both wired and wireless connect and get a local IP address like 192.168.1.11*. Additionally, the router has a slowly blinking light corresponding to this connection, which is different from other good connections like my printer which has a solid light on. Here is output from running route -n:
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0
169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 wlan0
View 2 Replies
View Related
Nov 15, 2010
I have a single pc with both a wired and wireless card in it. I want to take down the wired connection down and bring the wireless connection up with a cronjob at certain parts of the day.
Here are my interfaces:
Code:
eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:xx
inet addr:192.168.1.9 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::224:1dff:fe64:ecfb/64 Scope:Link
[code]....
Same error applies if eth0 is down and I try to bring it up, I get the same error.As a side note, here is my networking hardware:
Code:
00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
01:06.0 Ethernet controller: Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01)
View 3 Replies
View Related
Apr 30, 2011
I recently installed ubuntu 11.04 after trying 10.10 for a while and never had to deal with wireless seeing as I always had it hooked up. but Now I am running it on my new laptop which has a Ralink RT5390 802.11b/g/n WiFi Adapter, and I am truly stumped on how to get linux to recognize it. Do I have to install a driver?.. plus, my laptop has the on/off toggle switch assigned to an 'fn' key, so it easily toggles on/off in Windows, but not in ubuntu.
View 1 Replies
View Related
May 5, 2011
I have recently developed a problem with my computer connecting to the internet which has totally stumped me and is currently forcing my to use windows much to my frustration. I am using ubuntu 10.04 on a Toshiba Satellite laptop. My wireless and wired network connections will not connect. They are all present in the menu and i can click on them but the connection tries to connect and then just times out and fails to connect. Everything still works fine in windows Vista. The more confusing thing is i tried some live disks to see if they would work but they all did exactly the same thing including a live disk of ubuntu 9.10 which used to work perfectly and live disks of openSUSE 11.4 and Mint 10. I struggling to tell if this could be a hardware problem or not. The fact that the live disks wouldn't work suggests a hardware problem but the fact that Vista still works totally throws that argument. I have looked all over these forums and elsewhere and have found some similar ish problems but non seem to have the severity of this one as all of those seem to be wireless only problems. The only thing that i was doing at the time this started was i had just set up a new secondary user account but i suspect that may be coincidental.
View 4 Replies
View Related
May 6, 2011
So I had 11.04 beta and after the official release I updated,rebooted and lost all wifi and wired connectivity.
On an Inspiron 9300
lshw -C network gives
*-network:0 UNCLAIMED
For my Broadcom BCM4401-B0 100Base-TX and *-network:1 DISABLED For my wirless interface Intel PRO/Wireless 2200BG
View 1 Replies
View Related
Jul 21, 2011
can i be connected to both wired and wireless network at the same time iam using backtrack4 which is based on ubuntu 8
View 1 Replies
View Related
Sep 17, 2010
The fallacy in moving from desktops using PCI (etc) devices which have a history of available wireless and/or wired drivers is simply that one reaches a level of technology in modern laptops wherein drivers used by the devices in those laptops running Win7 are simply difficult to find for Linux OSs.
I purchased a Toshiba L500 (64 bit) which ran Win7 Home Premium; I wiped the HD and installed Windows 32 bit Pro. Runs like a top. Even after I installed Win 7 Pro, I had to search back on the Toshiba site for the wireless and Lan drivers to reinstall. I then installed Fedora 13 which gives me use of Win7 but also Fedora; However, does anyone know where there is a copy of an rpm driver (or for that matter a deb driver) for the following; 1. Atheros AR8152 PCI-E Fast ethernet controller and, 2. the Realtek RTL8191SE Wireless Lan 802.11n PCI-E NIC?
Obviously, without the availability of online status for Linux on Laptops, Linux becomes a useless paperweight and I have a very fast new Win7 Pro machine.
View 1 Replies
View Related
Jan 30, 2011
[PC]--(wire)--[Router1]--(wire)--[Laptop]==(wireless)==[Router2]::[Internet]
My setup is above, I hope it comes out OK on this forum, and someone can understand what its supposed to be! My problem is I am not sure how to get [PC] to be able to see [Internet]. From [Laptop] I can get both networks to work, and have tried using brctl to bridge them, but as soon as I do "ifconfig br0 up" neither network... works anymore (cant ping either router).
View 2 Replies
View Related
Feb 7, 2011
I installed Debian 6.0 on my hp dv400 laptop, Ive been using linux ubuntu for a while now and my wireless card has always been picked up but after isntalling Debian its not working. This is what I have. Also I cant seem to install awn for some reason.
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04)
00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4)
00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04)
00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
06:05.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
06:06.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
06:06.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE 1394 Host Controller
06:06.3 Mass storage controller: Texas Instruments PCIxx21 Integrated FlashMedia Controller
06:06.4 SD Host controller: Texas Instruments PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
06:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
View 3 Replies
View Related
May 29, 2009
My current network setup at home is all wired, and that's worked for me so far. Now I want to set up a wireless connection on my Linux box that I can connect to with both my laptop and my Nintendo DS. I'd like to be able to host a wireless network from the Linux box, connect to it with some other wireless device, and have the wireless device communicate with the router, the internet, and other computers on the wired network. I have the wired network set up (statically configured) as eth0. Other network adapters present on the system are eth1 (not in use) and wlan0, wlan1, and wlan2 (identical cards, remnants from the last time I experimented with wireless).
So I guess my question comes in two parts:
1) How do I set up wlan0 such that it can host? Is Ad-hoc mode okay for this, or do I need to set it up in Master mode?
2) How do I forward connections between the wireless net and the router?
Note that I will be using WEP, as it is all that the NDS supports. I'd like to set up MAC filtering as well, but not until after I get something that works.
View 11 Replies
View Related
Apr 24, 2010
I have installed Linux for the first time on an old Gateway purchased from work. The system seems up and running, but I can't get connected to my wireless or the wired network. I have tried using the network manager, but it isn't working. I have tried reinstalling Fedora 12 I have the following LSUSB and LSCPI output.
[Code]...
View 6 Replies
View Related
Apr 29, 2011
F14 did not recognize my wired or wireless NIC upon installation. I have enabled network manager, what should I do from here? Here is my hardware specifications:
Network controller: Realtek Semiconductor Co., Ltd. Device 8176 (rev 01)
Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 05)
View 11 Replies
View Related
Jan 10, 2010
I have recently bought a new laptop for this purpose. It is a Toshiba L555D-103. It was pre installed with Windows 7 (64 bit). I have now installed Ubuntu 9.10 (32 bit). It works perfectly when wired. But it does not when I try it wireless. It did work wirelessly with Windows 7, and I have many more both stationary and laptops working through the router, so I do not think the router is the problem.I am guessing that there are no drivers for the wireless to function, but I am not sure. I am guessing that there are no drivers for the Ethernet card ?
View 9 Replies
View Related
Jan 18, 2010
I recently purchased an Acer Aspire 1410 notebook running Windows 7 home edition. I installed Ubuntu 2.3 and my wireless and network LAN connection is not working. I saw on a link in this forum, someone was having similar problem. However, when i tried the solution that was recommended/suggested to the person, it did not work for me.
what I can do to get my wireless and wired connection to work?
View 9 Replies
View Related
Jan 31, 2010
I recently got a cable modem from Comcast, and connected a Belkin F5D7230-4 wireless router to it, then connected my computer and an Xbox 360 to the router with ethernet cables.
My computer dual-boots Ubuntu 9.10 and Windows 7. In either operating system, the wireless connection is flawless. In Windows, so is the wired connection. But in Ubuntu, there's a lot of trouble with the wired connection -- specifically, while I can connect to the router and to the Internet, and while I can use ping, dig, traceroute, etc., to verify connections to remote hosts, Web browsing, or anything else that uses http, works only for a few Websites, and then only erratically.
I don't believe it is a DNS problem -- testing with ping, dig, etc., demonstrates that, and I have also tried using alternate nameservers. I also don't believe that it is an issue with IPv6, as I've tried the fixes usually suggested, including editing the grub configuration to disable IPv6 support in the kernel and verifying that IPv6 was inactive. I've also tried using local dns servers such as pdns-recursor. None of these things seemed to help.
Also, perhaps unrelated, but disturbing: my computer has locked up a few times while testing the wired connection, and I had to use a hard reset to restart the computer.
View 1 Replies
View Related
Mar 6, 2010
I installed ubuntu 9.10 on my laptop a few days ago and love the OS so far. However, initially i could only get internet connection though an ethernet cord. After much internet searching, i finally figured out how to get wireless internet. Unfortunately, in setting up wireless internet, I no longer have wired internet. The system doesn't seem to recognize my wired internet anymore. I'd like a scenario where i can connect to the internet both wired and wireless.
View 9 Replies
View Related
Mar 22, 2010
I just installed (dual-boot with Vista) Ubuntu 9.10 in my Toshiba Satellite M300. The problem is that (when using Ubuntu 9.10), its network is dead, both wireless and wired. The LEDs of the LAN port don't even blink. My wifi is not also detected. Both of my wifi device and LAN port are functional when using Vista.
View 1 Replies
View Related
