My Live CD won't boot in the machine that I want to put openSuSE into.
I was able to install it in another machine, then remove the harddisk, put it in a USB enclosure, and copy the partition to another partition on the target machine, using gparted. All files copied accordingly, to the target partition, which is just slightly larger.
I edited my menu.lst, but openSuSE does not boot if selected. I get a corrupt file error...
Is this a boot sector error, which did not copy over?
fdisk returns this:
Disk /dev/sdb: 30.7 GB, 30735581184 bytes
255 heads, 63 sectors/track, 3736 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Can anyone give me links for installing Lucid on an single disk Win XP with 5 partitions as a separate DUAL BOOT system - esp screen shots? I want to install it in a 8gig EXT3 partition without touching or messing up the others, but the default seems to want unassigned space. I want to make sure I pick the right alternatives, which are never properly explained on installation.
This is a new bigger laptop hard drive that I copied over the Win XP partition (1), 2 data partitions (from an external drive), a 8.04 Ubuntu Ext3 partition (which I finally formatted with GParted), and a last NTFS partition. If you say "install inside a partition", will it also make the SWAP partition from that space? It had GRUB on it, when I formatted the Ubuntu on the old drive, I lost the GRUB on that partition so it wouldn't boot without installing syslinux w SUPERGRUB boot disk.
On the new disk that hasn't been done, so it won't boot as of now. Will installing Lucid Lynx with GRUB2 find the Win XP and make the proper shortcut to it or should I fix the MBR w SUPERGRUB disk or something else first?
I have a Acer Aspire 5003Wlmi Turion 64 ML32 1.8Gh, 1gig ram. Before I used the AMD64 Hardy, but was disappointed at limitations of software I could use (and never knowing what would work or not). After a half year, the Hardy broke irretrievably and I could never login (even with every trick). Do you recommend using the i386 or AMD64 version of LL? Any known problems with Lucid Lynx on this machine (now 4 years old)?
I'm trying to copy kubuntu from a old disk to a partition on a new hard disk. I used the command:
cp -apx /mnt/source /mnt/dest
I also edited fstab and changed the uuid to the correct partition, rebuild grub, and rebooted. When booting the kubuntu in the new partition, the sysytem still refers to the old partition (which is much smaller). ie: df displays the old partition. Is there another config file that has to be edited?
I have an old Dell Inspiron 8200 which I use for doing my CCNA study on. I installed Ubuntu 9.10 and it the cairo dock, all was running great, a little sluggish at times but thaht was down to the integrated display adaptor, no problem. I then decided to try out Open Suse but didnt like it so reformatted the whole disk back to Ubuntu then my problems started.
After going through the installation, I found the computer would only boot in the live CD mode, no files were copied. I then reformatted back to Windows XP and try top set up a dual boot system but the same results!, no data on my hard drive from Ubuntu!!. I then installed a new hard drive and tried a new dual boot installation but with the same results, what is stopping the machine form installing Ubuntu
I recently upgraded to a bigger hard disk. I used CloneZilla to copy my 150GB ext3 /home partition on my Ubuntu system to a shiny new 800GB ext3 /home partition. However, I've filled it up to almost 150GB, and I keep getting warnings that I have only 300MB available. It looks like the free space is being reported incorrectly. GParted recognizes the size of the partition as 800GB, and Nautilus reports the same when I boot from a live CD. I've tried using tune2fs to remove the reserved blocks and e2fsck -f to fix any errors, but nothing's changed.
Some time back using this computer a SucKit rootkit was found. Having dd urandomed the drive, flattened CMOS battery, flashed BIOS, run Knoppix live CD 6.1,using no flat pack battery (laptop), and memtested the RAM, I am still having problems with what I suspect is a javascript file that tries to reload the rootkit from? firmware. I suspect the firmware as everything else should have eradicated it??
Also it or a hacker via a backdoor then corrupts the drivers so devices malfunction. Windows security programs and rootkit detectors don't seem to pick it up. Fresh install of Windows or linux after the above still show this problem, though internet not used. The person who admitted rootkitting this machine is capable of writing java programs or using javascripts to do all this.
When viewed using Ubuntu 8.4 files and dates on a Windows partition appear normal both in file manager and terminal. However booting using Knoppix CD these files are all green, and I cannot change their permissions, even as root. ie: everything is green including text files etc. If I copy them to a linux partition, I can change their permissions and make them nonexecutable and nonwritable. Also on the Windows FAT32 partition the . directory has the date 1 Jan 1970.
If I disable any green files, I can shutdown and reboot cleanly. If I don't I start having problems shutting down [/usr/sbin/init ?] And always these follow a pattern:
Can't remember details as I have now corralled the beast but error messages relating to:
I have a brand new thinkpad X301 with 4GB of RAM and thinking of getting fedora 11 on it. The plan is to have it triple boot with vista/seven and hopefully OSx86. I am aware of the 4 primary partitions limit on an MBR disk. I was thinking of having a swap file instead of swap partition and not creating a boot partition as well. If I install the boot loader(GRUB?) on the root partition will I be able to boot it without any problems by using vista's boot loader?
Or Maybe I should install GRUB on the MBR and add all the other operating systems on it? Does anyone have any objections for not creating a swap partition or a boot partition? When comes to desktop environment I've been using KDE in the past, is there any major advantage of using Gnome over it? KDE seems to look really nice on fedora where Gnome is maybe more stable?
using onboard windows disk management i have made 75gb unallocated to add to the aforementioned ntfs data partition. but, after resizing extended partition, will i need to fix grub even though i will be adding the unallocated space to a storage partition and not the ubuntu boot partition?
I'm trying to install on HP ML 350 F13 G6 with standard array controller and 3 drives in raid 5. Well, when the installation process get the screen that shows the files copied (all copied...) , it freezes and does not advance more. Perhaps groped a firmware update? Other distributions are installed correctly.
I'm running 9.10 off of a 4 GiB CF card. I keep running into space issues with updates, so I purchased an 8 GiB replacement card. I've cloned the 4 GiB card to a .IMG file using DD.I've then copied the 4 GiB image back to the 8 GiB card using the Ubuntu startup disk creator program. Once done, I'm able to properly boot off of the new 8 GiB clone.Unfortunately, the clone ends up with 3.67 GiB of unallocated space at the end *see attached). I tried deleting the "extended" partition that the swap is located at after booting from a Live CD and the system was unable to boot after this. I was thinking that I would delete the swap entirely and create a swap file after I merged the existing partitions, but I was unable to do this.
best way to do this (e.g. get one large 8 GiB partition with my old image on it)? I still have the original untouched 4 GiB card and also have an external CF drive if I need to redo the cloning. I've also used Clonezilla before, so perhaps there's a way to do this that allow me to grow the image as it's being cloned.
My most recent F11 -> F12 was a near-fiasco, because I had the bad luck of foolishly having two distinct physical drives in the same system, where the /(root) partition on each drive had exact same UUID (result of partition cloning and neglect to change the UUID on the copy)
BUT! the UUID redundancy was not the initial trigger of my problems (its near-disastrousness played itself out only while I was REMEDYING the initial problem). The initial trigger: insufficient space on my /boot partition. "preupgrade" neglected to properly assess the space and/or warn me about it before proceeding.
In addition, the automatic cycling out of grub kernel entries came to bite me (part of many factors of the near-fiasco) because after the unfinished upgrade i had only one working kernel left to boot into, until I messed up that remaining one (too long a story), and then grub-install messed up my booting because of duplicate UUID. At any rate, at the end of what looked like a good preupgrade-reboot-upgrade-package-install process the post-install phase lingered a looong time, then I found myself booted into the old Fedora 11 kernel with absolutely NO modules (corresponding /lib/modules had been erased by the upgrade!) Somehow the system ran, but no USB, no wifi, no ethernet, no way to easily place the right kernel rpm onto the hard drive (had to unscrew the drive,etc., to copy over the correct kernel rpm). (Plus, file /boot/preupgrade/vmlinuz, left over from the arrested upgrade, was NOT the right target upgrade kernel version (2.6.32.9-70.fc12), so it didn't help either because it didn't have its modules either. The target /lib/modules (version 2.6.32.9-70.fc12) WERE there, but the kernel itself was NOT, due to upgrade running out of space on the /boot partition).
(Oh, and the preupgrade/upgrade had deleted my /var/cache/yum/preupgrade/ packages; hence my inability to quickly (re)install the 2.6.32.9-70.fc12 kernel rpm -- why!? it hadn't successfully finished the process!)
(Also, FWIW, i ended up rescuing the system through "rpm -i --force <kernel>", many an F12 rescue boot, chrooting, /boot/grub/grub.conf & fstab edits, tune2fs/uuidgen, running grub on command-line ("setup (hd0)"), etc., etc.)
So, any tips out there on phasing out the old-school /boot partition scheme, the safest and easiest way (without destroying a working system, of course)?
My laptop can't boot from cdrom becouse it is broken and it can't boot from USB becouse it has never been able. Ubuntu 8.10 now run in my laptop withgrub 1.I've just try the following trick.1) I put grub4dos in /boot2) I put iso image in /boot3) I add the follwing entrt in source.list
Code: # =========== GRUB4GOS =================================== title == Use grub4dos for the following entries: ==
Added an SSD (dev/sdc) and decided to move some less often changed directories there. Started with /usr and /boot, leaving / on a primary in the first drive, for now. All started ok, and my changed fstab mounted the right ones, and the system works.
However, grub is actually using the original /boot on / on sda1. I cannot see any way to change this. (Which makes it sorta hard to update the kernel
From grub:
Okay, since it has two choices, I tried to tell it which one to use. But, grub> root (hd2,5) does nothing.
Disk /dev/sda:
what I seem to recall, grub doesn't care about the boot flag on the disk. Nor does it care about primary vs. logical (except GNU doc says "makeactive" only works on a primary?).
The GNU doc also indicates that it looks for a directory /boot on the partition, so if you're mounting a partition as /boot, it also needs to contain a /boot directory under it. Tried that, but no change.
Is my problem the logical partition? Does that prevent "grub> root" from changing it? I'm afraid to wipe out the old /boot and find that I can't start up.
After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
I am trying to install Ubuntu 10.04 LTS on a Windows XP Media Centre Edition system.On the Step 4 of the installation which usually gives you the option to partition the disk but it only gives me the option to Erase the entire disk or specify partition manually, although this also doesn't allow anything other than totally erasing the disk. I'd ideally like to keep my Windows and I have installed Ubuntu before (but 9.10) on a different system.
I am trying to install a box here where my /storage partition is about 2.5T.I had setup the partitioning with suse, while testing, and all worked well.Now when trying to install CentOs 5.5 it gives me an error, that my boot partition is on a gpt partition and this machine cannot boot that.Also I don't see the option to create XFS partitions from the installer.Can 5.5 support GPT @ install time?
I am new to Debian but have some basic experience with Linux and am currently trying to triple boot Windows 7, Fedora 16, and Debian on an HP Pavilion dv7. I have the Windows Boot Loader on my MBR because I've heard that Windows updates can cause boot issues if GRUB is installed there. This means that I've been installing GRUB in the /boot partition for each Linux distro and creating corresponding entries in the Windows boot menu.
This has worked in the past with both Fedora and Ubuntu, but I have not been able to work around it with Debian. When I choose my Debian option in the Windows boot loader, it loads GRUB but hangs after it prints "Welcome to GRUB!", and I have to restart the computer. I would like to hear what more experienced Linux users have to say both about why this isn't working for Debian and about if keeping the WIndows boot loader is the right way to go.
Also, here is my partition layout:
Partition 1: SYSTEM (HP pre-installed) (209 MB) Partition 2: Windows Partition (472 GB) Partition 3: Extended (160 GB) 1: /boot for Fedora (524 MB) 2: Physical Volume for other Fedora partitions (79 GB) 3: /boot for Debian (749 MB) 4: Physical Volume for other Debian partitions (80 GB) 118 GB free space Partition 4: HP_TOOLS (HP pre-installed) (108 MB)
I installed fedora 10 on my laptop as a partition with vista. However i'm now not able to boot into my vista partition as everytime I try it comes with an error saying "bootmgr" is missing. Below is whats in my grub.conf file. However I am able to access my vista partition through fedora.
I was creating dual-boot WinXP on my machine with F10 allready installed.
On my 1st try, windows froze when inspecting hardware, so I deleted boot partition with fdisk and then it works.
I installed succesfully XP on last partition on my drive, but XP won't boot because of hal.dll error (forums says it can be repaired by changing boot.ini).
Now what I want is to create new boot partition to reinstall grub.
I'm trying to do that from gparted live cd:
From gparted live, i entered console and did "fdisk /dev/sda".
When i type 'p', here is my output:
Code:
when I try to type 'n' to create a new partition, it tells me "No free sectors available".
Before /boot was on /dev/sda1 (Start@1, End@13), and NTFS was on /dev/sda13.
I am Quad booting my lappy with Fedora 12, Opensuse Karmic and Vista. Previously Grub2 is not recognising Fedora partition. Now i have managed to add Fedora entry to Grub2. But i got another problem, after selecting Fedora from grub menu, i cant get login window. I can see fedora sign at the bottom right corner of Laptop LCD.
I'm trying to understand how I can partition my hard disk to allow for a dual boot (Windows & Ubuntu) as well as allow access to a certain set of files from both Windows & Ubuntu. So far I understand that I'll need:
1 Windows boot partition ~2-4GB 1 Linux boot partition ~2-4GB 1 Linux swap partition ~1-2 GB
But I don't know:How can I keep my non-boot linux files & folders -- /home, /usr, etc. -- separate from the boot files? Do I need another partition? If yes, what size & format -- FAT32, ext3, etc. -- should it be? If I separate, for instance, the "/home" folder only where do the remaining folders and files reside? How can I access certain files with both Windows & Ubuntu? Do I need yet another partition, formatted in FAT32?
I would like to install XP to /dev/sda5,sda6 being karmic. (I may have a dying dvd burner as was unable to install it yesterday but..) I got in a dreadful mess with grub after attempting to upgrade to Lucid,I needed to reinstall anyway. Will I be able to dual boot or should I just start from scratch?
Ive decided to create a new thread because my old one had become rather complicated and now had a misleading title.
I have a laptop with Windows XP and because of a few programs I want to keep it on and dual boot with Ubuntu. I have created a boot partition at the beginning of the harddisk because I had broken the 137gb and cant keep Ubuntu at the end and still make it bootable.
The separate boot partition is at the beginning of the disk and mounted as /boot in the installation.
The system still cant boot into Ubuntu, but at least grub shows up with a decent menu and I can choose Windows. When I try to choose Ubuntu it says that it cant find the specific drive. The UUID is the same as the boot partition
So what should I do now ? Should I change fstab and move some files to the boot partition ? Id rather not move the entire Ubuntu partition to the front.
I just got a new Toshiba Satellite 64bit laptop with 4bg of ram and a 640gb hard drive, I want to dual boot windows 7 and Ubuntu 10.04 Lucid Links and I had the guys at Best Buy make me a partition so that if something went wrong with the partition it would possibly be on them. the issue I'm running into is that I can't seem to figure out how to boot to the "S" partition on my hard drive when installing Lucid Links via a USB key.
I have been looking around and cant really find a guide on how to do this, I have found guides on how-to put a live CD on a usb flash drive, but this isnt want i want to doI want to use a high-end USB flash drive as a sort of SSD to put my boot partition on, I think if i do this it will decrease my boot time significantly. If it works i am going to take the back case off of my laptop and install the guts of the flash drive inside my laptop, i think the mod would be cool, i just dont know how to do it on the software side
I now that when I run my PC and insert Ubuntu Live CD/DVD it installs it on the same partition, but how can i do this from boot, because I can't boot Windows XP, I installed Puppy Linux so my PC is usable but I need to access the data from Windoink Iws Partition, which I can do from Puppy. But I want to install a "real" OS like Ubuntu but still be able to access Windows XP Partition data. I think it is not possible to access the data from Ubuntu on a seperate partition so they have to be on the same one if I am right. Just if you wanna know why I can't boot XP? I get the BLUE SCREEN OF DEATH!
i wanted to dual boot lubuntu and my existing windows xp. i installed lubuntu 8.10 and everything was fine at boot. i could boot in to either then i upgraded lubuntu to 9.04 and windows was gone from grub? can i delete my lubuntu partition and windows will boot again?
System Layout: Alienware M17 Laptop 2.26 GHz Quad-Core CPU 4.0 GB DDR3 RAM
Hard Drive #1: Toshiba 500 GB 7200 RPM Hard Drive #2: Toshiba 100 GB 7200 RPM
What I was thinking of doing was putting Windows 7 Ultimate (64-bit) and Ubuntu 9.10 (64-bit) on the 100 GB hard drive - with just under a 75/25 split towards W7 (approximately 70 GB for W7 and 22 GB for Ubuntu). Would this be optimal, having the operating systems on one drive separate from nearly everything else?
Another question that I was unsure about with this setup was the swap area. It doesn't need to be on the same HDD as the running OS to be utilized, does it?
Also, any partition size adjustment recommendations.
