Hardware :: Reasonable Temperature (range) For AMD Phenom II X4 965
May 7, 2010What is a good reasonable average temperature (range) for this processor? At what temp should I begin to worry?
View 14 Replies
ADVERTISEMENT
General :: What Is The Reasonable Minimum Ram For Ubuntu In VMWare
Jul 21, 2010I'm running Win 7 on 3G ram on my host machine
I need to open an Ubuntu 10.04 VM in VMWare 7 and it needs to stay open for whole day for accessing some sites and connections.
I won't serve anything, just uses putty and sometimes firefox.
I run it on 256 MB but did anyone managed to run it under this. I don't know too much about linux and its deamons.
How can i disable them and which are useless for me ? for example i can see that evolution related deamon is running but i did not open it ever.
OpenSUSE Hardware :: 11.3 - Graphics Not Running At Reasonable Speed
Oct 22, 2010On an old laptop I needed some package (pdftk) from 11.3 and so I upgraded. But I cannot get the graphics running at a reasonable speed now. This old laptop has a Radeon RV350 (mobility Radeon 9600 M10) as shown by lspci. The current ATI closed source drivers don't support this card any more but the legacy driver doesn't support the 2.6.34.7-0.4-default kernel anymore.
Using the open source xf86-video-ati driver gives me an unacceptable alternative:
Without a kernel boot parameter it's dead slow, glxgears shows only 200 frames/sec and my Opengl application (see below) is just unusable with this setting.
Adding the 'nomodeset' kernel parameter make the graphics much faster - glxgears reports 1800 frames/sec - BUT now my Opengl application freezes the machine (only a power cycle can revive it). I'm using the Python/OpenGL application "Impressive" to present pdf files.
Fedora :: How To Reset Login Font To Reasonable Size
Jul 27, 2010I am running Fedora 13 x86_64, and have been using the nouveau display driver.I have just installed the Nvidia driver using the easyLife application. Having already set up most things as I like, I only set easyLife to install the Truetype fonts and the Nvidia driver.the initial re-start was a bit nasty, the login screen fonts were huge and the desktop font also huge. I did manage to reset the desktop font size via System> Preferences> Appearance>Fonts>Details. The resolution was set somewhere in excess of 300, and I brought that back to 96 which has put the desktop back to normal.The login font size remains very large, and I have followed advice to set the DPI in the monitor section of xorg.conf 'Option "DPI" "96 x 96", but that hasn't had any effect.Does anyone know how to reset the login font to a reasonable size?
View 1 Replies View RelatedGeneral :: Multiple Tmpfs Mounts And Reasonable Settings For /tmp?
Jul 17, 2011My laptop now has 8GB of memory, so I think mounting a tmpfs over /tmp is a reasonable thing to do. I also want to prepare for getting a SSD in the near future.The computer has a 1GB swap partition and I've set vm.swappiness=20
1) There is also a tmpfs mounted to /dev/shm. Both have the default size of 50%. Is there a way to get /dev/shm and /tmp to share the same capacity without doing a symlink or bind?
2) Is the swap partition a good size (is that swappiness value ok)? What happens if /tmp runs out of room? Should I increase the swap size to something really large like 15G (because I have swappiness so low...)?
Networking :: What Are Short Range Link And Long Range Links In Routing
Jun 23, 2009get me understand the short range and the long range links from routing (and routing protocols') point of view.
View 6 Replies View RelatedSoftware :: Gnuplot - Combining A Linear Range And Log-scale Range In The Same X-axis?
Apr 24, 2011I want to plot a set of data in only one plot.The problem is that some points of the data should be better plotted in a linear scale (lets say 0 to 100,000) but there are other data points that, exceding the value 100,000, would be better plotted in a logarithmic scale, as they goes in the range 100,000 to 500,000,000. Let's say the data is:
Code:
X Y
0 100
10000 80
20000 75
[code]....
Is there a way to plot all these points in the same plot in only one X-axis showing two different ranges in that axis: linear: 0-100,000 logarithmic: 100,000 - 1,000,000,000?The axis would be read, for example, as:
Code:
|-----|-----|-----|-----|-----|-----|-----|-----|-----|
0 20k 40k 60k 80k 100k 1M 10M 100M 1G
(The abbreviations k-M-G are not the important point. Just shown for clarity)
Programming :: Bash Script To Ping A Range Or Own IP-range?
Apr 11, 2011I want to build a bash script, which can ping a range IP adresses which will be filled in by the admin. If there is no IP-adress filled in, then the script must ping the subnet where the system is logged on. So if my ip is 192.168.1.6, then the script must ping from 192.168.1.1 till 192.168.1.255 Or else, if there is given a beginning and ending ip it must ping that!
The first part of the bash script is to ping a given range (see below). But there is one problem, how can I tell the script to ping from $begin till $end, [..] is of course wrong! But what must be filled in there???
echo "Enter beginning IP-adres:"
read begin
echo "Enter ending IP-adres:"
read end
ping -c 1 $begin [..] $end
The second part is to find my own ip and ping the whole range.. How to do that? I only can find my own IP, but I cant ping the whole range,, how to do that?
#!/bin/bash
ifconfig | grep 'inet addr:' | grep -v '127.0.0.1' |
cut -d: -f2 | awk '{ print $1 }'
Hardware :: CAS Latency For AMD Phenom II Overclocking
Jun 12, 2010I'm getting close to ordering the components for a new machine based on the AMD Deneb quad core and had one last question.I'd like to try a little careful overclocking, not only for the performance increase but also to learn how. Nothing extreme, no gaming, just whatever I can get with good stability with the stock heatsink and fan.I was going to get 8GB on 2x4GB strips but they are all CAS latency 9. The MB has 4 slots for a total of 16GB capacity. Would I be better off going with 4x2GB strips and try to get a lower latency strip like maybe 7?
View 5 Replies View RelatedRed Hat :: Centos 5.3 - 2 CPUs Are Missing On AMD Phenom II X4
Mar 12, 2010Not so long time ago I have installed Centos 5.3 on my AMD Phenom II X4 server (I am hosting game servers on it). Only today I noticed, that cpuinfo shows me only two CPUs. I watched for the info in the dmesg and found there that the system boots up only 2CPUs.
Here is some info from the dmesg:
Quote:
Linux version 2.6.18-164.11.1.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Wed Jan 20 07:32:21 EST 2010
Command line: ro root=/dev/VolGroup00/LogVol00
ACPI: Local APIC address 0xfee00000
[Code]....
Am I correctly understand that something wrong in BIOS? Or it is something else?
Fedora Installation :: OS Doesn't Support AMD Phenom X3?
Aug 24, 2009i've downloaded and burn the live cd of690MB, ISO format, 1 CD-ROM disc image for Intel-compatible PCs (32-bit) I am trying to install on my desktop which runs on phenom,it just doesn't bootbut on the other hand on my thinkpad laptop it works...
View 3 Replies View RelatedRed Hat / Fedora :: Centos 5.3 - 2 CPUs Are Missing On AMD Phenom II X4?
Mar 12, 2010Not so long time ago I have installed Centos 5.3 on my AMD Phenom II X4 server (I am hosting game servers on it). Only today I noticed, that cpuinfo shows me only two CPUs. I watched for the info in the dmesg and found there that the system boots up only 2CPUs.Here is some info from the dmesg:
Linux version 2.6.18-164.11.1.el5 (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Wed Jan 20 07:32:21 EST 2010
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 0:4 APIC version 16
[code].....
Hardware :: Sensors Only Detect One Phenom II Core?
Oct 17, 2010I have k10temp driver built into the kernel and using lm_sensors 3.2.0.But, sensors can only detect 1 phenom core.Quote:
k10temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +40.2�C (high = +70.0�C, crit = +99.5�C)
Fedora Hardware :: AMD Phenom Quad Core Using I686 Packages?
Jul 10, 2010I'm having an interesting problem. I have an AMD quad core and for some reason I can't install x86_64 packages only i686 it originally didn't bother me, but now that i've finally decided to install an ATI graphics card I bought off a friend before i was running fedora but i can't installthe driver for it.
View 2 Replies View RelatedOpenSUSE Hardware :: Slow Performance With Mutexes And MySql On Multi Core CPU - AMD Phenom II X4 965 - With 11.3
Nov 11, 2010I have installed OpenSuse 11.3 32 Bit in a virtual machine on an older computer on a Windows XP host and on a new computer with AMD Phenom II X4 965 processor.
With sysbench I tested the performance of mutex and on the new computer it is 3 - 4 times slower than on the virtual machine. Other performance tests with sysbench for CPU, memory and threads are faster on new computer like expected. I tested this, because I have a slower performance of table creation in MySql tested with sql-bench, where creation of 10000 tables lasts 45 seconds on the virtual machine but over 400 seconds on the new computer.
I have tested with kernel-desktop and kernel-default but there are not large differences. File creation was tested with bonnie++ and is on newer computer faster as expected.
My questions are:
- Why is the mutex handling on the multi core CPU slower than in the virtual machine and how to speed up this?
- Or is there another reason why table creation of MySql is so much slower on multi core CPU?
Fedora :: Running A Dual Boot Windows 7 Home Premium And 12 System On An AMD Phenom Platform
May 31, 2010I am/was(?) running a dual boot Windows 7 Home Premium and Fedora 12 system on an AMD Phenom platform.
I thought that I would try the KDE desktop and installed it with the command
yum groupinstall "KDE (K Desktop Environment)"
After tasting KDE for a while I decided that I far prefer Gnome.
I removed the KDE with
yum groupremove "KDE (K Desktop Environment)"
This appeared to work but I then found that whilst I can boot into Windows 7, I can no longer boot into Fedora 12.
I have tried booting the F12 DVD and going into to the Rescue function. I re-installed grub but still cannot boot into F12.
I have looked at grub.conf but can see nothing wrong.
Red Hat / Fedora :: Get Temperature Of CPU?
Jun 6, 2011In my system, the temperature of the CPU can be known from the file,/sys/bus/acpi/devices/LNXTHERM:00/ thermal_zone/temp . But I have found that not all systems have this file. Is there a generic method to get the temperature. Installing a package for this purpose won't be a solution as I'm building a simple gnome-shell extension. Something that comes along with the kernel would be perfect.
What could be other files that can possibly store temperature information, so that it would work on most atleast if not all? Any help like the file that stores temperature on your particular system only would also be highly appreciated.
Hardware :: VIA C7 CPU Temperature
Mar 5, 2011Does anybody know wich temperatures a VIA C7 processor can tolerate (max) ?
If i let the server run without the top: ~40C (104 Fahrenheit)
If i let the server run _with_ the top on: ~65C (149 Fahrenheit)
Someone over at silentpcreview.com suggests that the C7 can easely tolerate temperatures of 100C (212 Fahrenheit)
OpenSUSE :: HDD Temperature Control?
Mar 29, 2010There is a question, i'd like to ask: is there any decent program to monitor HDD temperature for linux? WHy are they so few? Suse Install repositories do not show any that could be installed. I used to use hddtemp on my previous 11.2 gnome installation, but it seems now something gone wrong, and i cant get this program anymore through: "sudo apt-get install hddtemp" and receive "sudo: apt-get: command not found", so as i am a newbie i can barely guess what is wrong. maybe there are any other programs to get this thing running. Its really puzzling because every laptop user need such tool badly, and i do not understand why is there so many monitor tools for cpu temperature and not a single good for hard drive which is far more important than cpu temperature, that rises and drops constantly as soon as your fans are fine???
View 2 Replies View RelatedOpenSUSE :: Can't Measure Temperature
Sep 3, 2010I installed opensuse 11.3 to my laptop.Toshiba L505-13w satellite. core i5 2.27 ghz , 4gb ram, 1gb ati display.I can't measure cpu temperature. I tried "acpi -t" and sensors but nothing happened.I also tried system information widgets from plasma menu.Still I can't see my cpu temperature. Can anyone help me about this problem? I want to see my cpu temp.
View 1 Replies View RelatedUbuntu :: Can't Monitor Cpu Temperature?
Jan 2, 2010I've recently installed Karmic on my new machine with the following specs;
Asus M4A785TD-V EVO Motherboard
AMD Athlon II X4 620 2.6GHz
Crucial 4GB (2x2GB) DDR3
Coolermaster Elite 330 Case
Western Digital WD5000AAKS 500GB
I'm looking to install some sort of temperature monitoring for my cpu and have had luck using either lm-sensors or acpi. With lm sensors, I've followed the various how to's on the forum and am still coming back with nothing. Trying to add hardware monitoring to panel brings up a 'no sensors found!' error, and x-sensors just starts up with a blank screen.
'sensors' in terminal spits back this -
Code:
lou@lou-quad:~$ sensors
No sensors found!
Make sure you loaded all the kernel drivers you need.
Try sensors-detect to find out which these are.
lou@lou-quad:~$
I've added the relevant lines into etc/modules as per the last question during configuration but still no joy. I've just run 'sensors-detect and had a gander at the output, and I'm wondering if its as simple as no one has written a driver for my mobo yet.
[Code]...
Ubuntu :: Getting CPU Temperature With MSI Board?
Oct 1, 2010So I just got a MSI 870A-G54 and have been trying to get the CPU temperature on the command line. I ran the following
Code:
sudo apt-get install lm-sensors hddtemp sensors-applet computertemp
And ran sensors-detect
Code:
sudo sensors-detect
# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
# System: MSI MS-7599
# Board: MSI 870A-G54 (MS-7599)
[Code].....
Ubuntu :: Check Out Temperature Of Cpu?
Sep 1, 2011So I would like to check out my cpu temperature in function of time. I've followed [URL]...gpu-en-ubuntu/ but unfortunately in the description it was for the old version of Ubuntu and despite having downloaded the program, I simply can't add it in the taskbar. I did in a terminal: sudo apt-get install sensors-applet. Then I installed a few remaining packets from synaptic. Now how do I run the program?
View 6 Replies View RelatedHardware :: GPU Temperature And Fan Speed?
Apr 5, 2011My nVidia graphics card gets too hot to touch very quickly. Below is current statistics, but it is usually 93C.Is this too hot? Should I speed up the fan? How I do this without risking frying the thing?
View 10 Replies View RelatedSoftware :: Cpu Load With Temperature?
Jun 5, 2011i need a script that can log simultaneously the individual cpu core load and individual cpu core temp, like the "cpu core temp" software in window. write that script that can log these values for over a certain period of time with a fixed time of interval in between the two values?or is there any such tool in unix?
View 7 Replies View RelatedCentOS 5 :: Lm_sensors - To Get CPU Temperature?
Oct 24, 2010Trying to find the CPU temperature, I found this lm_sensors is what I need..I do this;
wget http://dl.lm-sensors.org/lm-sensors/releases/lm_sensors-3.2.0.tar.bz2
bzip2 -dv lm_sensors-3.2.0.tar.bz2
tar xvf lm_sensors-3.2.0.tar[code].....
OpenSUSE :: Temperature Plasmoid Do Not Work On Kde 4.6.2?
Apr 25, 2011openSUSE 11.4 64 bitsI have "sensors" package installed and configured with sensors-detect.The cpu temperature monitor plasmoid worked on kde 4.6.0 without problems but after installing 4.6.2 the monitor do not show any info.By running "sensor" from konsole I can see the temperature for both processors so it seems to be something related with the kde update
View 9 Replies View RelatedOpenSUSE Hardware :: App To Show The Temperature (probably Of The Cpu)?
Nov 28, 2010I'm using default KDE openSUSE 11.3 64 bit In windows I can see the temperature of my HP laptop (cpu I suppose). Is there a facility for viewing that in Linux / openSUSE. Maybe in KDE, maybe in Yast, wherever?
The reason is that my laptop's temperature and fan speed increases slowly when I convert large video files from one format to another and the computer eventually shuts down spontaneously when the temperature becomes critical. I'd like to watch this so I can prevent it. So I need the app.
Ubuntu :: 10.04 - 2 Cores CPU Temperature High
Apr 13, 2010I have a notebook with AMD Athlon 64 QL-62 2 cores CPU. Normally the temperature is 50-52 Celsius in idle but with Ubuntu 10.04 beta 2 idle temp is 60 Celsius. /proc/cpuinfo shows both cores on 1GHz which is good but still temp is higher than usual. I tried to find solution using Google but I didn't find anything.
View 1 Replies View RelatedUbuntu :: Temperature Too High Then Normal
May 3, 2010If I install Linux Mint 8 or Open Suse , temperature is 48 as windows mostly.If I install any other distro, temperature goes to 80-85 and fan is always On.Ive a laptop dell just bought it, dell studio 15, 4ghz ram dual core etc, a monster for linux but ive this problem, kinda annoying when you wanna have something silent and that doesnt become a furnace.
View 2 Replies View Related