I just installed Fedora on my old laptop. When I run the vga out into my monitor, I am limited to a resolution lower than desireable. Is this cuz of the video card in the laptop? Cuz of Fedora? I am sorta new at this.
View 1 RepliesI have the following inside /etc/security/limits.conf(I have specified root separately because * will not include it.)
user2 - core unlimited
* - core 0
root - core 0
[code]....
I would like to limit any process from using more than 500 MB of RAM. AFAIK this is done using RSS in /etc/security/limits.conf but the process called gnome-panel apparently is using 618436 kB of VmRSS. How can this be ?
/etc/security/limits.conf
* hard rss 512000
username@debian:~$ cat /proc/3002/status
Name: gnome-panel
[code]...
I running ubuntu 10.04, but im having problems and i'd like to upgrade to 11.04. If i get a live CD for 11.04 can i reach my backup program from there and restore my music collection?
View 3 Replies View RelatedI've set limits in limits.conf but they don't seem to be having an effect (the easiest to test is maxlogins). Do I need to do something to enable the limits?:wqEDIT: old postI know you can have file system quotas, is there any way to set a similar quota for CPU usage for particular users so that they can't hog all the system resources (either intentionally or accidentally)?A preliminary Google search is suggesting it's not possible, but I can't believe thatOk, limits.conf and pam... I used bad search terms apparently. Now I just need to figure out how to use this stuff, but that shouldn't be an issue.
View 2 Replies View Relatedso when they log on to their profile in kde, they have a max of "x" hrs per day, but not necessarily on any set schedule. can it be done?
View 5 Replies View RelatedToday I noticed, that despite a 1kb/s limit upload being set i was seeding at an unlimited bandwidth, it had been running for 3 hours wasting about 300mb.
I had never seen this before, however 10gb mysteriously disappeared from my 25 quota last month as i dont mind seeding things at 1kb to help people get the missing bits. My 25gb costs me $100 with the larger package being $160 so i dont have much choice but to be stingy.
I have changed and added some lines to /etc/security/limits.conf. At this time I can not reboot the system. Which service limits.conf belong to so that I can restart that service.
View 4 Replies View Relatedi need to limit summary working time at system. I tried use limits.conf for this. If only two lines would be thereQuote:TestUser soft cpu 10estUser hard cpu 20 So user TestUser can login at system at any time, work any time period, and when summary time of all its logins reaches 20 mins all his proceses would be killed?p.s. if i am wrong in method whith which i try set time limit for user,
View 8 Replies View Relatedhow to check the print quota status on print server?
View 1 Replies View Relatedi realised that although before when i had windows7 my relative download speed was around 5.0 MB/s ( i have a 50MB virgin connection)now with ubuntu 10.10 im limited to only 2.8MB/s or somewhere around there.
First i tested my wireless speed on another laptop (with windows 7) on the same network and the speed was as i said around 5.0MB/s sometimes even more. So i thought it was only chrome that i was using at that point.However, this download speed limitation appears in jdownloader as well as in firefox and i guess the whole system.
SO im wondering if there is any way to set up the speed limit on the system and if there is, how should do i go ahead with this change,through the terminal or through preferences?
I'm using Slackware with NFS share and I've been wondering why I had problems with access to some folders and I finally figured out that NFS limits group membership only to 16. Is there a simple way to circumvent this in Slackware?
View 7 Replies View RelatedI am having two kids, that should not be able to use our computer more than one hour daily each. Is there an elegant way to automatically force a log-off after a certain time has passed?
View 2 Replies View RelatedHow i change the limits of e-mail sizes on the server. I have an e-mail server installed with CentOS3.
View 4 Replies View RelatedMy foray into Linux is one of hopeful necessity:I have a friend who doesn't have any comp & whose son is leaving for the military. I have an old pc I was planning to recycle but instead would like to see if it can be put back into use.She has wireless service in her apt building which she would like to access. I don't know if the versions of Linux that are light duty enough to operate on such a low end machine still suwifi networking... (I will have to download it at home to a mac, burn it to cd & install from there)? Is it possible to install a wireless card into an old P3/128mb ram (IBM 6564/GL300) and get it working?
View 4 Replies View RelatedI just picked up an AcerAspireOne AOA150-1777 netbook that I've loaded slackware 13 onto. I'm using fluxbox as my window manager. Screen resolutions look good, running at 1024x600, as I set in xorg.conf. My question is, some applications, (gimp/firefox are good examples) open windows that are too big for the screen. I was wondering if there was a way I can set apps to use the limits of my screen size.
View 2 Replies View RelatedWe want to know following :
1) What is the difference between rtprio and priority in limits.conf?
2) How to apply changes in values of limits in limits.conf?
3) What is the value system takes if it is not set in limits.conf?
4) What is the max/ideal value of each parameter especially priority?
I want to change the resource limits for a specific processOr to create a new process and give it limits as I want, There is a function setrlimit, Which is possible to change it but for a programmatic I want to apply it to another Process, The problem is that this function does not receive process ID for example. I read in most books on the subject of The Linux system programming
View 1 Replies View RelatedWhat limits a file to have some maximum size depending on the Operating System? I do not exactly understand this. If you have the storage space, what else can be the limitation? You should be able to store as much data as you want the way you want (even in a single file) unless you run out of storage space.
View 5 Replies View RelatedI recently installed Ubuntu 10.10 (64bit) on my laptop (Toshiba satellite L300 64bit) and have since had horrible issues with the machine overheating. When the system is idle, the temp is decent, a bit warm maybe. If I start browsing the Internet, temp goes way up. I cant watch more than 1 and a half minutes of a ..... video without the system's temp exceeding acceptable limits, and shutting itself down. I have tried both the 32 bit and 64bit versions of ubuntu 10.10, as well as a 64bit version of 10.4. same overheating issues with all of these.
I am 99.999999 percent sure that it is an issue with my laptop's cooling fan, as although it appears to be spinning, it is so quiet that I would think it was off completely if I were to not tilt the laptop back and check to see if it is spinning. Also, the speed of the fan does not change, regardless of the machines temp. Even before it shuts off because of extremely high temps, the fan is still running at that same speed. I am currently downloading fedora 14, a different linux distro, to see if there is any difference.
I'm running a server using Debian 5, on which a few people log on to over SSH using a user account with limited permissions. Basically I want to make sure they can't run things like fork loops as a lot of bad stuff would happen were the server to hard reboot.So, how can I test what something like this will do:
Code:
:(){ :|:& };:
in a controlled environment, ie. so that I can kill it without rebooting?
My friend and I were discussing partitioning and we disagreed on repartitioning when the drive was full. How full is too full before partitioning will mess up your file system? I've partitioned before but it was only after the OS was installed, so only about %5 of the drive is being used. I read that 90% or more is too much. My friend claims it doesn't matter, and you can repartition even if the drive is 95%+ full.
View 1 Replies View RelatedI want to limit what a authenticated user can do on my Linux server. I've set the default shell to rbash, but I know a knowledgeable user can switch shells. Can I use file permissions to deny execution rights to /bin/bash to anyone who is not in a particular group? And if that works, how do I find out what other shells are installed on my server (Ubuntu 9.10)?
View 7 Replies View RelatedI have some init scripts that launch some daemons that I wrote. I want Linux to generate a coredump anytime something crashes. I activated coredumps in /etc/security/limits.conf by adding the next line:
* hard core 100000 After rebooting, I run ulimit -a and I can see that coredumps are not activated: > root@computer:~# ulimit -a > core file size (blocks, -c) 0 First, I checked if there is any file script on my system that deactivates coredumps (greping ulimit -c 0 ), but I didn't find anything so far.
Then, I created a bogus c program..to double check if it's working, and I can confirm that it's not. The program is this
[Code]...
Our Apache server is pretty much configured straight out of the box, and I've noticed it is using far more CPU and less memory than another server where I have the following:
RLimitCPU 8
RLimitMEM 100000000
RLimitNPROC 24
The Apache documentation says that if these aren't set, the values are obtain from the OS. How can you tell what those are? I'd like to see if I can tune Apache's performance, but I don't even know if these values are higher or lower than what it's currently using...
clarify me with ulimit output and memory limit?
ulimit -a output:
core file size (blocks, -c) unlimited
data seg size (kbytes, -d) 1572864
[code]...
When I boot my computer I get this message: Warning Pc video resolution is out of range Change setting to recommended resolution 1280x1024 @60mh So I hit ctrl alt f1 I typed in Sudo dpkg-reconfigure xserver-xorg Nothing happens. It's been very frustrating because with everything that I've looked up it says that it's suppose to guide me through something. I desperately need my computer for school.
View 8 Replies View RelatedBarebones installation. Manually start x with 'startx'. For some weird reason, the resolution randomly sets to either 1024x768 or 800x600. How do I permanently set a resolution?
View 1 Replies View RelatedI'm running 10.10. I have a Nvidia GTX 460. My actual resolution is only 1024x768. I can't get the native resolution (1280x1024). Nvidia-settings does not show this resolution. Google hasn't helped at all so far, and I have installed the Nvidia Driver.
View 2 Replies View RelatedIs it fair to say that connLimit and hashlimit are very similiar on Linux i.e. while hashlimit caters to limits for groups of ports, they both set the connection rate limit per host? How in IPTables, do I configure a policy that limits connections on a port that encapsulates the total sum of all connections from all hosts? i.e. I do not want to allow more than 6000conn/minute for port range that is the sum of all connecting hosts?
View 3 Replies View Related