I'm getting some jitter when capturing via RCA or S-Video from an em28xx device. Input type is PAL, other than that I haven't fiddled with mplayer or vlc's options (vlc only sees the RCA input, mplayer sees both)
View 1 RepliesI've made a lot of progress getting my easycap 2.0 usb capture device to work with ubuntu 10.10. I've got the picture up any everything works great. But about a minute into the stream it just freezes, I need to go into "playback" and either pause then play, or click "next", it then refreshes and works again for another minute or so. I'd believe it if someone says faulty hardware because the easycap is cheap, but I don't think that's the case. Additionally, is there any way to set VLC so that when I open it, it automatically opens with my video capture device (/dev/video0) so that I don't have to go into the options and change it every time?
View 1 Replies View RelatedIn Ubuntu 9.10, I was successfully able to use my Pinnacle Dazzle DVC 100 (a cheap USB analog video capture device). I use it for backing up old video that is stored on tapes, and it isn't working with my current install of Ubuntu 10.04. When I plug the device in, it should be detected and the em28xx module should be loaded. This fails and /var/log/messages has the following:
Code:
Sep 25 16:13:18 kernel: [1196215.111898] usb 2-2: new high speed USB device using ehci_hcd and address 20
Sep 25 16:13:18 kernel: [1196215.266097] usb 2-2: configuration #1 chosen from 1 choice
[code]....
I'm making an attempt to install drivers for my easycap dc60 USB video capture device. Someone was good enough to make a driver project on sourceforge. Problem is I cannot get it compiled.
Code:
Building
make[1]: Entering directory `/home/jan-bart/Download/easycap_dc60.0.4/src'
make -C /usr/src/linux-headers-`uname -r` M=/home/jan-bart/Download/easycap_dc60.0.4/src modules
make: Entering an unknown directory
make: *** /usr/src/linux-headers-2.6.31.8-0.1-desktop: No such file or directory. Stop.
make: Leaving an unknown directory
[Code]...
Since I upgraded to 10.04 my Webcam (a logitech Quickcam Pro 4000) won't capture video.Ubuntu see it is there, but aMSN, Google Talk, Skype, and Cheese all give me nothing.
View 2 Replies View RelatedI want to capture DV-video through IEE1394 (FireWire) with Kino and Ubuntu 10.10. Seems I can't capture... When I plug in the camera there is no hot plug message (if there should be one? I've read it should...). The DV-out on the camera is enabled There is no option to enable/disable the port in my BIOS.
Some information:
Code:
a~# lspci | grep 1394
07:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
Hope there are some command to check?
I've been trying for a while now to capture videos with my webcam of my samsung n110 netbook, I am running ubuntu 10.4 and cheese 2.30.1. I can take pictures fine, with effects and everything but when I press "start recording" the webcam seems to turn off or all I see is a black image, then when I press stop recording the camera picture comes back on and then the program freezes. I've tried turning down the resolution, I've tried all the possibilities in gstreamer-properties but nothing helped so far running from terminal didn't give me a clue on what the problem might be either. I would like cheese to work to have photo and video in one program but if someone has a good program to capture video I am willing to try it out.
View 8 Replies View RelatedI'm just wondering if there is a video capturing program that can, at the least record what is on my computer screen (including what is on Wine) and at the most capture what is on my webcam as well.
View 2 Replies View Relatedvideo playback is like I have applied a blueish sepia filter over it. And this is just the playback from totem player or mplayer, and not the playback from ..... (and generally online streaming) - this works just fine. this messy video playback also appears when I use cheese to capture video with my webcam. Note that the preview picture of the video file on nautilus has the natural colours it should have.
at first when I installed the os this particular problem didn't exist, but it came up the time I decided to follow the "comprehensive multimedia guide". So now I have all the pros of following the guide, but this is a major con...
I am having problems with ffmpeg. My goal is to capture a video stream from my webcam and feed that into a webcam-capturing program. But to get that to work, I will need ffmpeg to work. I need the following command to work, but I get an error:
Code:
$ ffmpeg -b 100K -an -f video4linux2 -s 320x240 -r 10 -i $device -b 100K -f image2pipe -vcodec mjpeg - | perl -pi -e 's/\xFF\xD8/KIRSLESEP\xFF\xD8/ig'
ffmpeg: relocation error: /usr/lib/libavfilter.so.2: symbol avformat_find_stream_info, version LIBAVFORMAT_53 not defined in file libavformat.so.53 with link time reference
I need to capture from my webcam. It has a mic too.I can specify video input device as /dev/video0.I specified input audio device as /dev/dsp2 ( OSS device, corresponding to USB Webcam), Now VLC throws an error, "VLC is unable to open the MRL 'alsa:///dev/dsp2'. Check the log for details".Thinking it wants an alsa device, I specify device as /dev/snd/pcmC2D0c. (got it from kinfocenter and dolphin). Now again an error, "VLC is unable to open the MRL 'alsa:///dev/snd/pcmC2D0c'. Check the log for details.".I try with any device, the same error. I have added myself to audio device so that I can read/write to the mentioned devices.I see no way of switching VLC to use OSS. And I see no information (documentation on net) on it's expected device listing for audio.
View 5 Replies View RelatedGot a Ubuntu system. Have a device on my LAN that can send Syslog messages.
I would like to:
1. Capture these specific syslog messages.
2. Keep them separate from any other syslog activity on the Ubuntu system.
3. View these syslog messages later.
I have been trying to get tvtime or any tv package to work with my Pinnacle PCTV HD usb but I have not had success. I have correctly installed every driver imaginable. So, here is what it what it comes down to: When I open tvtime it says "cannot open capture device /dev/video0" and the screen is blue. But my usb PCTV HD stick is NOT /dev/video0 so the question is how can I get tvtime to look for the usb tv tuner rather than video0?
View 9 Replies View RelatedI'm trying to view the output of a dv firewire capture device (advc-100) fullscreen through vlc. I've read of people being able to do this but a detailed explanation of how eludes me.
I'm running Ubuntu 10.10 and VLC 1.1.4
The error message I'm given after trying to open through 'media>open capture device>play' is;
Quote:
Your input can't be opened: VLC is unable to open the MRL 'v4l2:///dev/ffc1/'. Check the log for details.
(and I can't find the log)
I'm not even sure if I've got the device name right so I ran lspci from the command line which gave the following output (and I still can't work out what it is);
Quote:
[ 0.008410] ... event mask: 000000000003ffff
[ 0.014418] ACPI: Core revision 20100428
[ 0.020016] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.020023] ftrace: allocating 21756 entries in 43 pages
[Code].....
I have video capture device "MSI vox USB 2.0", every thing seem to be fine, but none of tv applications show the device, they just show my webcam "/dev/video0"
It's driver is "em28xx" from "v4l2"
I test it with "mythtv, tvtime, xawtv, kdetv, me-tv, v4l2-tool, vlc, mplayer" none of them work detect the device, expect mplayer open a green window with time out message.
The device work fine under windows I test it with vlc-win
lsusb show:
Quote:
dmesg | grep em28xx show:
Quote:
Quote:
So i did:
Quote:
then:
Quote:
Quote:
Quote:
Trying to install the drivers for my blackmagic intensity pro capture device and I cannot get the driver to install I get an error in the ubuntu software center saying:
There seems to be a programming error in aptdaemon, the software that allows you to install/remove software and to perform other package management related tasks. Please report this error at [URL] and retry.
Details:
Traceback (most recent call last):
File "/usr/lib/python2.6/dist-packages/aptdaemon/worker.py", line 768, in simulate
return self._simulate_helper(trans, status_path)
File "/usr/lib/python2.6/dist-packages/aptdaemon/worker.py", line 851, in _simulate_helper
size = int(deb["Installed-Size"]) * 1024
ValueError: invalid literal for int() with base 10: ''
I have the latest ubuntu fully up-to-date.
I have a video capture card MP-2010 from Commell.What configure and software I am supposed to do in order to let the video play on fedora 11?
View 3 Replies View RelatedI'm building a Linux system specifically for video capture in prep for yet another video games review site I want to attempt. She is running Debian Sid with Enlightenment as her desktop.This system actually has two different devices that should be able to do the capture from the Wii, PS2, XBox, and other systems that can connect to it. The first is the video card itself, an ATI Rage 128 Pro AGP 4X, which has TV (aka composite) in as well as what I am guessing is S-Video in (not positive on that since the port has significantly more than 4 pins unlike the S-Video ports on my AV switch). The other is an external ATI TV Wonder USB TVWonder, which has coax, composite, and S-Video inputs.
When I installed and ran XAWTV, it crashed with a complaint that there was no video grabber device found. When I did lsusb, I saw that there was no sign of the external USB capture device. lspci showed the video card, but no mention was made of its TV capture feature. However, I am not certain if there was supposed to be any separate entries for that.So anyway, before I start bogging you all down with what may or may not be too much system data, I first need to know, is this an exercise in futility with the hardware I have? Is video capture with Linux even possible with these, or should I start shopping for something else?
Are there any USB video capture devices that work with Linux? Something that will take an input from RCA video and audio jacks.
View 1 Replies View Relatedi am looking for recommendations for a usb video capture card. i basically want to take co-ax input coming from a cable digital converter box and save the content (mpeg, avi, mkv, ...).
View 5 Replies View RelatedI have a digital camcorder, an analog camcorder, and a set top dvr.
I want to get video and audio material from them onto my notebook (i.e. I don't have any PCI slots, etc. to plug a video capture card into).
My notebook runs kubuntu karmic Linux with Windows XP (in a VM).
It has USB 2.0, firewire, PCI card, and Express Card interfaces.
I am looking for any reasonable way to do this.
All three devices have composite video out and left and right audio out RCA jacks. The digital camcorder also has USB and firewire ports, but didn't come with any software (and AFAIK the software has long since become unavailable).
Plugging the digital camcorder into my notebook via USB or firewire cables didn't do much of anything in either Windows or Linux.
Awhile ago, I bought the Hauppauge USB-Live 2 video capture device (it's a smart cable that's supposed to convert from the RCA plugs to USB), but had no luck getting it to work in my XP vm and very limited results under Linux - with a lot of help from a fellow lug member.
Under Linux, I tried using polaris.
[url]
At this point, I just want to get the job done any way I can, but since the devices are still in use, it's not a one-shot deal, so I need a solution that will continue to work. I'd prefer it in Linux (where it would also have access to more computing power), but XP would be fine too. If I need a different interface/converter, I will buy one if it's not too expensive.
Soon, I will also have access to my partner's new notebook, but haven't reconfigured it yet. When I do, it will be running kubuntu lucid with Windows 7 in a VM.
I am getting myself set up to create a series of Linux based how to videos, with the first being on building a Debian box for general web use and document creation, etc. on "recycled" hardware, starting at the very beginning, even going so far as to include how to download a netinstall iso and make it into a burnable CD.
So anyway, one very important ability I need for this project decent video capture capability. I need to be able to capture the output of the install into a proper video format, on which I can provide commentary about what is going on on the screen.
I have another Debian box that is equipped with a bt878 TV/Video capture card, and the box I am using for the Enlightenment project I posted about many times recently has a Geforce 5600FX. Last night, I ran a cable from the S-Video out on the GeForce to the composite in on the capture card (had to go composite since I don't have an S-Video cable long enough to cross the room... Cable used has an adapter to switch to a standard RCA cable.
So, after getting the two hooked up, I got XAWTV installed on the capture box, and rebooted the other computer. With XAWTV running, I was able to see the boot up process going through the capture card. So I think I am on the right track.
But (and isn't there always a big but?), the captured video leaves a lot to be desired. Here is what the final AVI file looks like: Warning. This is a big file
As you can see, the video quality is mighty poor. And it wasn't just the final video either. It looked this bad in XAWTV as well. So, is there any way to improve the video quality in XAWTV; and also, how about increasing the app's resolution since the tiny square of video is not easily readable, and I will need it to be legible on a full size display?
If XAWTV is unable to do this, then can anyone here recommend and alternate video capture app that would be up to the task at hand? Also would like an app that will actually save my settings, as XAWTV always reverts to whatever the default settings were when I shut it down and restart it.
In addition to improving the quality of the S-Video output, I also need some recommendations on how to reduce the filesize when capturing the video. The original, before Photobucket converted it to flv was an avi file over 10MB, which is really inefficient for my needs.
Finally, can anyone recommend a PCI video card that has S-Video output (must be a 4 pin S-Video connector), and has at least 8MB of video RAM? Or does some kind soul here have one lying about that they may be willing to part with inexpensively?
So, a summary of this post...
1: How do I get XAWTV to provide S-Video capture that is actually readable?
2: How do I get XAWTV to record in a higher resolution?
3: How do I get XAWTV to save my ******** settings?
4: If any of the above 3 are not possible, what are some other alternate video capture apps to try?
5: Hook me up with a 8MB or higher PCI video card that also does S-Video out? (4 pin S-Video connector is a must).
I have two sound devices, an internal audio device on my motherboard and an external USB devices, which came with my headset. After upgrading to 11.4, the microphone on my headset ceased to work with my softphone. As it turned out, the softphone used the standard input device, which was defined in the Phonon tab in the KDE System Settings. Unfortunately, when I put the USB Device on top of the default input stack, it doesn't stay there. When I apply the changes and leave the Phonon tab or even enable "Show advanced devices " the stack always resets to its initial order. I was unable to find any kind of config file where Phonon saves this settings.
View 4 Replies View RelatedI am watching streaming video via Firefox and Flash player. The data rates are too slow so I am getting choppy audio and video. How do I download the clip so I can play it back later. The video is coming from a tourism web site.
View 9 Replies View RelatedAnyone knows of a video capturing tool for Linux that can work like FRAPS in Windows? Basically capture a window or full workspace in video.
View 1 Replies View RelatedI have created several DVDs from my camcorder (sony handycam DCR-HC21 NTSC); however, the recordings are too long. I would like to capture smaller segments of these and load them online to share with family and friends.I would like to know what is the most recommended software for this task. I am running Ubuntu 9.10.I would have done this by using a firewire cable directly attached from the camcorder to my laptop, but my laptop has only USB ports. So I ended up creating DVDs using an stand alone Video Recordable DVD Drive.
View 1 Replies View RelatedHow do I capture video from my JVC GR-DF470 MiniDV camera into 10.04 Lucid.PiViTi looks good for an editing app, and I've installed OpenShot as well, but neither have a way of capturing the video from a camera. I used Kino previously in 8.04 Hardy, but it was buggy at best in 9.10 Karmic; I've just installed it in 10.04, but capture keeps stopping after 2 or 3 seconds. I also tried kdenlive, but the audio capture has a lot of 'noise' that is louder than the voices on the tape, and once it finishes capturing video, it doesn't display a 'Save' dialogue as it is supposed to - so that wasn't very successful either.So what can I use to capture video from a MiniDV Camera via Firewire.
View 9 Replies View RelatedI am working in a script I have, to capture video with sound from my capture board, wich is a clone of the pico2000. This script was working in Ubuntu 9.10 untill I reformated my machine and instaled the Ubuntu 10.10, 64 bits. The machine is an AMD Athlon II, 2.6GHz with 3 GBytes of Ram. The former script was:
Code:
#!/bin/bash
clear
SERVICE="mencoder"
MOVIE=$(date +"%H%M")
[Code].....
This is on Karmic Koala 9.10. The video displays fine via guvcview using a Logitech webcam. The trouble is the capturing of the video. With .AVI, I've tried different video formats (MPEG-4, flash, etc.) and none of them will play. The generated .avi file seems to grow with data, but the result is just unplayable -- it just hangs, thinking it's playing. Is there a troubleshooting page or something to figure out what the problem I'm having with guvcviewer is?
View 1 Replies View RelatedI'm trying to make a stop motion video using StopMotion but can't get the program to capture any video off of my Logitech webcam. Only a black screen appears when I click the "camera" button and alternates between a brief green screen.
View 1 Replies View Related