Hardware :: Boot Halt After Initrd With Large Hard Disks?

Feb 5, 2011

upon installing 4 2TB drives, my server will not boot. I have tried booting from a slackware 11 dvd and passing these boot paramaters:

huge26.s root=/dev/sda1 noinitrd ro in addition to just trying to boot from the DVD using the huge26.s kernel. the kernel starts to load and says "Ready." Then sits there with a flashing cursor... The problem only exists with the new 2TB drives installed. I never had any problems when I had 750GB drives installed. Also, everything works fine if I boot from the DVD using "huge26.s root=/dev/sda1 noinitrd ro" as boot paramaters, and insert the 4 2TB drives (hot add) after the system starts booting.

I have also tried booting from a backtrack 3 cd but experience the same problem (boot halt after loading initrd)

View 13 Replies


ADVERTISEMENT

OpenSUSE Install :: Boot From USB Connected External Hard Take Long Time From Loading INITRD Image To Start Boot Process?

Jul 18, 2011

I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.

View 1 Replies View Related

Ubuntu :: Keep Connect Both Hard-disks / At Start Select From Which Hard-disk To Boot?

Mar 9, 2011

I have two internal harddisk. Harddisk 1 has ubuntu, fedora installed and harddisk 2 has ubuntu installed. I normally connect either one, and use it. How can i always keep connect both harddisks, and at the start, select from which harddisk to boot? Or it's not possible?

View 7 Replies View Related

General :: Boot Two Hard Disks - XP And Kubuntu

Sep 10, 2010

I have installed xp at the main hdd. It has 3 partitions. Then I installed Kubuntu 10.04 on the slave hdd. When I boot, it doesn't recognize kubuntu. When I searched at My PC in XP, didn't recognized the slave hdd. I switched the hdd (slave to master and viceversa) and it didn't go well either.

View 8 Replies View Related

OpenSUSE Install :: Can't Boot Anymore From Any Of Hard Disks

Jul 18, 2011

i have got a very strange boot problem. But first: I have openSUSE 11.4 with kde installed. I have the amd64 dual core cpu and 2 hard disks. I was able to boot from both of those disks (on the second disk I have openSUSE 11.2 in case something goes wrong with the first disk). Then I decided to install openSUSE 11.4 from DVD to a usb key (just like I would to a hard disk). I succeeded. I did not involve any partition of the hard disks in this install. But now I can not boot anymore from any of my both hard disks although bios finds them it did before. After bios I get the following message: Loading stage 1.5 error 21.

Error 21 means: Selected disk does not exist. This error is returned if the device part of a device- or full file name refers to a disk or BIOS device that is not present or not recognized by the BIOS in the system But I am still able to boot from usb key. I have even modified the menu.lst from the usb key to boot openSUSE 11.4 from the first hard disk. This works fine. I have also tried to install grub again on my first hard disk with grub.install.unsupported and with yast2. But installation stops with an error message like "hard disk not found by bios".

View 3 Replies View Related

General :: Hard Drive - Does Check Disks During Boot Instead Of Shutdown?

Dec 3, 2010

I'm just curious - why do all linux distros (all I've seen) run their periodic disk checks during boot? I mean, I understand that a disk should be checked now and then, but why does the system do it during boot, when I'm waiting for it to load, instead of checking them during shutdown, when (most probably) user doesn't need the computer anymore.

View 5 Replies View Related

Ubuntu Installation :: Pxe Boot Doesnt Detect Hard Disks?

Feb 26, 2011

I have a fully operational PXE boot server, the client boots up and begins the setup process however, fails to detect the hard disk, I have tried with ubuntu 8.10, 9.10 and 10.10 and none of them will see my hard disk, I boot to the cd and it sees the hard disks with no problem, so apparently the pxe boot server isnt serving up the neccesary drivers or something to detect my hard disks properly. They are just IDE drives and like I said, regular cd install detects my drives just fine.So if anyone here has any information that may help shed some light on this issue I would be so grateful

View 1 Replies View Related

Ubuntu Installation :: Boot From Flash Drive Without Hard Disks?

Jun 13, 2011

I have no hard drives in my computer, so I have been trying to boot Ubuntu 11.04 from an 8GB usb flash drive. Is this possible? So far the best result i have gotten is it will sit on the loading screen for a while then dump. I was only able to get the last little bit which reads mount. mounting /dev on /root/dev failed: no such file or directory. mounting /sys on /root/sys filed: no such file or directory. mounting /proc on /root/proc failed: no such file or dirctory. target file system doesn't have requested /sbin/init

View 4 Replies View Related

General :: Unable To Boot From Ssd With Multiple Hard Disks System?

May 2, 2011

I have a PC with 4 harddisks and one ssd drive, presently PC boots from the 1st harddisk and other harddisks (sometimes 1, 2 or 3, depends upon the requirement) are used for the storage. Now i want to boot the PC from SSD and use the other harddisks for the storage only. My problem is that when system boots it takes 1st harddisk as sda and SSD as sdb, if i am using only one harddisk, and if i use 2 harddisk it takes sdc as SSD. So i am not able to give fix boot point in menu.lst file, if i wish to use root filesystem from SSD.I am using 2.6.33.7 kernel and grub bootloader. I have tried using initrd with udev but not able to include and start udev properly in initrd. I am trying to boot from UUID or LABEL, but no success. Am i missing something in kernel to get the UUID or LABEL.

View 6 Replies View Related

OpenSUSE Hardware :: After Upgrade To 11.4 Hard Drives Not Properly Unmounted During Halt?

Mar 27, 2011

I did a zypper dup upgrade from 11.3 to 11.4 with no errors. My shutdown command has always been halt -h and during shutdown, I would always see verbose info about the drives being umounted, the "term" signal being sent, and the "kill" signal being sent. Since the upgrade, I only see the "term" signal being sent, followed by shutdown. On every boot since the upgrade, the system goes through several hundred lines of file repairing as the file system is not clean after shutdown. For whatever reason, the hard drives are apparently being killed before the umount is complete. I have changed no settings. The problem exists whether I do a shutdown from the KDE menu, or run halt -h as su from a terminal.

View 9 Replies View Related

Ubuntu Installation :: Which Disks Can Be Main Boot Disks

Mar 31, 2010

I have/had a PC with several hard drives, and a mix of ubuntu and windows on multi boot.The old boot drive died screaming, and I need to start again. (But my data is safe! yay!)

Is there anything special about which drive can be the main drive to start booting from? Or to put it another way, can I install to any of the other 3 and expect it to work, or do I need to switch them around so a different drive is on the connections for the recently dead one?

View 2 Replies View Related

Debian :: Make-kpkg --initrd Won't Create Initrd?

May 18, 2010

When I compile a custom kernel with this command: make-kpkg --initrd kernel_image kernel_headers and then install the .deb, there's no initrd in /boot and I have to create it manually. I've thought that the --initrd option should take care about this, but somehow it doesn't.

It behaves like this for about two years at least (since I've compiled my first kernel). Of course, it's no big deal to create it manually, I was just wondering whether do I do anything wrong or whether should I fill a bug report..

View 1 Replies View Related

Software :: How To Boot From UUID Using Initrd

May 2, 2011

i want to boot from UUID using initrd,

View 1 Replies View Related

Ubuntu :: Can't Access Two Different Hard Disks

Jan 30, 2011

I'm having two hard disks in my pc. I can easily access both of them from my windows. But in case of ubuntu i can access only that hard disk on which ubuntu is installed. The other hard disk can not be accessed from ubuntu.

View 2 Replies View Related

Hardware :: Using Old Hard Disks In New System

Nov 10, 2010

I'm going to buy a new system, and I have 2 SATA hard disks from my old system. One is installed with a Linux OS, the other with Windows Vista.For the Linux hard disk, will I be able to simply use these 2 hard disks on the new system and boot up, retaining all my data? If not, how do I transfer the data from my old hard disks to my new hard disks? My old system is faulty (no signal to monitor), so I can't just copy everything directly using, say, a portable hard disk.

View 3 Replies View Related

General :: External Hard Disks

Mar 22, 2010

I'm using SUSE11.1, and connected to my system, a DELL 7500, a 1.5 TB Buffalo external HD. I partitioned it in 4 sectors.After connection, nmediatly the mounted disk would appear on the screen,(each partition with its respective name), and could use it as any other folder.To unmount the external Hard disk, I just ejected each partition, and had no problem. I used the same HD with my Mc, and things were all right, I used to backup automatically the Mc. However after having been using the system in this way for more than half a year, suddenly the hard disk began to rattle...and the SUSE system on the DELL, nor the Mc can mount the external hard disk any more. Thus, the partitions can not be mounted any more. When I cd to /media/ in the SUSE, the names of the partitions appear, but they seem to be empty..On the Mc, going to /Volumes/, before the problem appeared, the names of the partitions were there... but now, they are no more and the automatic back up either.So my question is, how to mount the disk, if it needs mounting... or how I can recover the partitions and the data therein... I am clueless, after two weeks trying to solve the problem..

View 1 Replies View Related

General :: Regarding Local Hard Disks

Dec 28, 2010

In Fedora when we double click the Partitioned Local Hard Disks then we have to give the root password otherwise it will not open. Is there any way to read and execute the Partitioned Local Hard Disks without giving the Root Password.

View 5 Replies View Related

Software :: Lilo For Two ATA Hard Disks

Jan 23, 2011

I am booting Slackware 13.0 on an X86 from a (master) ATA hard drive. I have added a second (slave) hard drive that contains an installation of Slackware 13.1. This works in so far as I can boot 13.0 from the master drive, then mount the slave drive and read and write files to it. So the hardware is basically working.What I want to do is configure lilo so I can choose to boot either 13.0 or 13.1. So far I have not gotten this to work.

Under 13.0 the slave disk appears as /dev/hdb. The root-partion for 13.1 on the slave is the first primary partion on the slave, and appears as /dev/hdb1 when viewed under 13.0. What stanza should I add to lilo.conf to make the slave 13.1 bootable?

View 5 Replies View Related

Hardware :: Optimizing Large USB Hard Drives?

Jan 19, 2010

I recently purchased a Western Digital 1TB USB hard drive to use for general data storage. I had thought about repartitioning it into 8 - 10 individual drives (most Linux users will doubtless understand the arguments for and against this) and reformatting them with another filesystem, probably ext2.

The unit actually consists of two 500GB drives that are presented by the internal controller as a single 1TB drive, and are formatted with the old HPFS/NTFS filesystem, so I'm a bit cautious about the possibility of my original plan confusing the drive's controller. Does anyone have any experience with these large drives, any thoughts about repartitioning/reformatting, and relevant criteria for optimizing their use?

View 1 Replies View Related

Ubuntu :: Add An Initrd Entry For The Boot Line Of Another?

Jan 27, 2011

I have long been avoiding Grub2, but it got installed without my permission when I upgraded to Maverick. I was using the legacy Grub from Fedora and was quite happy, but after partitioning Ubuntu did not give me the choice of not installing Grub2. Anyway, I can live with it if I can learn it well enough to edit it as easily as I did legacy grub. My problem is that although Fedora boots fine, grub did not add the initrd entry to boot the Slackware kernel Which of course it requires.) I edited /boot/grub/grub.cfg and manually added, but as soon as I ran "update-grub" it removed it again. Does anyone know how to permenently add this line to the kernel line in Grub2 for Slackware.

View 5 Replies View Related

Ubuntu :: Format Alignment Of Hard Disks?

May 27, 2011

I thought that alignment of 4096-byte sector Advanced Format hard drives was automatically taken care of via Gparted or Disk Utility until I bought a Hitachi HTS547575A9E384 (Travelstar 5K750) and saw that Disk Utility showed my partitions to be out of alignment. I then realized that my WD, which I had bought a few months ago, probably had its jumper set to emulate a 512-byte sector legacy drive (512e) and is probably not set to the AF setting.

Straight to the problem.

I've searched many sites, some of which suggest using fdisk (others the proprietary software of the hard drive's manufacturer). It is essential that one change the arguments prior to changing the partition table as there is no way back (yet, as far as I know) without having to move data to another drive and starting all over:

[Code]...

View 9 Replies View Related

SUSE :: No Hard Disks Were Found For Installation

Aug 5, 2009

the hard disc has two partitions, one is 156gb ntfs, currently with windows xp prof sp2, and I am trying to install linux to the second partition, also currently ntfs.I am not a total newbie (i used fedora 10 last semester and ubuntu the semester before that). I have tried installing ubuntu9.04, fedora 10, fedora 11, and opensuse11.1 to this computer, and every time the installation probes for hard disks it comes up with zip, unless I have my external disks connected. Otherwise "No hard disks were found for the installation. Please check your hardware!"with OK button.

I also tried with gparted to see if I could find the hard disk, and still had no luck. I googled my problem and found others with similar problem but no satisfactory solution.does anybody have any idea what could be wrong and how to fix it??

View 6 Replies View Related

General :: Using LILO Then Moving Hard Disks Around

Jun 15, 2010

A few years ago I built a small Slackware system and, for storage, I used using a 2Gb Compact Flash card plugged into the primary IDE interface. Initially, I made a bootable CD rom, booted the new system from that, copied the file system to the CF card and then ran LILO to install a boot sector on the CF 'disk' /dev/hda. That all worked well enough.

The only trouble is that the CF card, being an early one, is rather slow and so I've just bought an Innodisk 2Gb Disk-on-Module which ought to be much faster. I have plugged that into the secondary IDE interface, I've run cfdisk to make a partition, formatted it using mkreiserfs and copied all of the contents of the CF card on /dev/hda to the new device on /dev/hdc. So far, so good. But...Now I need to run LILO from the existing CF card in /dev/hda to put a boot sector on the new /dev/hdc. Then I want to move the new device from /dev/hdc and put it in /dev/hda once it's bootable.

I'm stuck to know how to configure LILO to install a new boot sector on /dev/hdc. I don't appear to be able to make LILO understand what I'm trying to do. If I change the line 'boot = /dev/hda' in lilo.conf to 'boot = /dev/hdc', LILO aborts with an error message.

View 5 Replies View Related

General :: Add Entry To GRUB2 With 2 Hard Disks?

Jun 8, 2010

I have two ide hard disks. One with windows and other with ubuntu 10.04. i want both windows and ubuntu in grub menu so what should i do ?

View 3 Replies View Related

Server :: Configuring Four Hard Disks Externally Into One LVM?

Dec 30, 2009

I am connecting a complete set of four hard disks externally to my linux server.I have certain queries on that

1. How to make it detected. Will the cd which had come with that will install the required drivers?
2. How the cd drive will work out in linux?
3. How to configure all the 4 HDD into one LVM?
4 How to remove an already installed software from a linux system?

View 3 Replies View Related

OpenSUSE :: Creating Large Partition In Hard Drive?

Apr 14, 2010

I am so sorry but this is not for me. I cant make this work. I want to install windows xp back in my pc, i just give up with Linux, I lack the expertise to do anything here.

View 2 Replies View Related

Fedora X86/64bit :: Boot From A Vanilla Kernel Without Initrd?

Oct 17, 2010

I've downloaded 2.6.36-rc8 vanilla kernel, then I copied .config file from my current working kernel 2.6.32.21-168.fc12.x86_64, then I've configured, compiled and installed kernel like this:

Code:
make gconfig
make -j4 all (or make all)
make modules_all
make install
The last command edits my grub.conf file and writes this:
[Code]....

I checked my .config and ACPI, and File Systems are built into kernel and not loaded as modules... And, I have LVM but my /boot partition isn't in it, so I don't HAVE to use initrd, right? How can I boot from a vanilla kernel without initrd ?

View 11 Replies View Related

CentOS 5 :: Boot Stuck At Initrd After Reinstalling GRUB?

May 7, 2009

I am using CentOS 5.2 with GRUB booting a software RAID configuration. The first disk is md0 and is mirrored across sda1 and sdb1.I manually re-installed grub using grub-install and the machine will no longer boot off of the HD. The grub menu comes up, I can select my kernel the machine then jumps to loading the initrd and hangs.It will go no further. I have a live DVD that can boot from the HD. If I use that to first boot from the DVD, then specifiy the HD, it shows the same grub menu and then the machine boots fine w/o the initrd hang.I have tried re-installing grub but not been able to get the machine to work again w/o the DVD.

View 3 Replies View Related

Debian :: Auto-mounting Hard Disks On Start Up

Feb 18, 2016

I'm not sure how to do this. I checked the hard drive preferences and looked through the forums... I don't want to manually mount my hard drives(s) every time I boot up just to access my music and wallpapers.

View 5 Replies View Related

Debian Configuration :: Tool To Turn Off Hard Disks?

Dec 31, 2010

Is there a command line tool to shut off/spin down the hard disk either when not in use or when something is typed into the console? I'm trying to save power in a laptop I have..

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved