The search function does not like "U3" so I cannot locate the latest in removing it. Has anyone figured out how to do so using Linux? (Explosive, maybe, but was the Stupix worm hidden in flash drives using the U3 tools?)
View 9 RepliesI have a flash drive that I used on my old netbook to temporally hold a copy of ubuntu as the netbooks internal drive was dead. I have since got a new netbook and wanted to return the flash drive to simple removable storage. I've re-partitioned it back to 14gb fat32 2gb ext2 and everything is working fine. Except that if I try to boot with the key inserted grub loads then errors imminently (sort of obvious if grub is still in the MBR but there is no menu.lst file anymore...) Googling for removal of GRUB just gives me loads of hits for how to restore windows mbrs when you dont want to keep linux anymore. None of these methods seem to have any targeting. I need to remove grub from sdb while keeping it intact in sda. sdb shouldn't even be bootable, so that when boot from usb is higher in the bios than boot from hdd the usb key is ignored and the hdd is booted as normal.
View 3 Replies View RelatedI took some videos off a usb flash drive, then went and selected " safely remove usb" and the light continued to blink on the flashdrive, I pulled it out any way, and the root folder turned red... everything seems ok, but how do you know when it's ok to safely remove a usb devise ?
View 3 Replies View RelatedI made a persistent install of Ubuntu on a flash drive. I made changes to that installation. The software (Unetboontin) sets this all up. I think it partitions it for you. How do I image that flash drive to another flash drive?
View 9 Replies View RelatedI am sitting behind http proxy, and cant remove flash plugin. I go to system -> manage apps and remove. From there I get only loops: [URL] while I've set up all proxy settings in system - configure proxy.
View 1 Replies View RelatedSee the attached picture. I'm using Ubuntu 10.04. I've tried removing and re-installing flash using both Terminal and Ubuntu Software Center to no avail.
View 9 Replies View RelatedI installed Ubuntu 9.10 on half of my D drive about a year ago, but realized that I don't really need all the space on the Ubuntu partition. I have Windows Visa Home Premium installed on my C drive. Is there any way to re-size the drive on which I had installed Ubuntu without removing it?
View 4 Replies View RelatedI wanted to know if i can install 9.10 onto a usb flash drive--without using my computers hard drive at all when running ubuntu off the flash drive-
View 3 Replies View RelatedBack in Febuary, my wife bought a Toshiba Satilite from Wal-Mart and a few days ago the hard drive got toasted. So now I'm using an 8gig usb drive as the boot drive. I also have 2 other flash drives for downloads and such but overall I am very pleased.
I'm running 11.04 32 bit and was wandering if 64 bit made a difference. I've got 4 gigs of ddr3. It's slow to boot, but once it's running, it's faster then Windows 7. Very nice.
Is there anything I should chage, use, since I'm running it off a flash drive??
I have 3 seperat drives, 2 x 16 gigs and an 8 gig, and was wandering which one would be best for booting off of? What do I look for??
Here's what I got:
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:01.0 PCI bridge: Toshiba America Info Systems Device 9602
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
[Code]....
I bought an 8GB flash drive because my D drive doesn't read DVDs. Anyway, my goal is to install Linux ubuntu and have it be my OS (replacing Windows XP). Last night I went to the Ubuntu homepage and downloaded the Ubuntu desktop edition 32-bit and put it on my flash drive. I followed the instructions on how to open and run it, but I was never asked about whether I want Linux to run side by side with Windows or if I want it to replace Windows. It downloaded the whole program, my computer restarted and then (on a black screen) it asked if I wanted to use Windows XP Home Edition or Linux Ubuntu. It's really frustrating because it took a while to download and install it in the first place AND to top that off, when I tried to use Ubuntu it went to a black screen and at the top said that there was an error. So I uninstalled all the ubuntu program and software and now I have a clean slate and want to try this again. I am a complete n00b. Could someone please walk me through how I can go about downloading (w/ links plz), installing and making ubuntu my ONLY OS on my computer via a flash drive? I'm desperate and I don't want to go through all of that and make the same mistake again!
View 9 Replies View RelatedI have a Transcend 4GB USB flash drive that suddenly stopped working. However, when I insert it into the USB slot, the light on the drive glows, but I'm unable to mount the drive, neither does ubuntu detect it.I disconnected the flash drive, and then run `dmesg | tail`. The result was this :
[ 623.940610] scsi7 : SCSI emulation for USB Mass Storage devices
[ 623.940928] usb-storage: device found at 6
[ 623.940931] usb-storage: waiting for device to settle before scanning
[code]...
I did an installation of SUSE 11.2 on a new SCSI hard drive. Keeping the old hard drive separate. I remembered there was some info on the old hard drive I wanted.
I added this to the system and mounted a partition. I then copied the data over. Then I umounted the partition rebooted the machine and removed the hard drive.
However the machine will now not boot without this hard drive even though its not mounted. Not sure what the error message im given means I think it could be trying to fchk it.
Do I need to do something more like remove /dev/sdd ?
My little server box running 11.04 currently has two drives configured in a LVM, a 160gb internal drive and a 1tb usb drive.I have three logical volumes root and swap on the 160gb and backup on the 1tb. I am going to be changing the internal drive for a 8gb SSD and would like to keep the data currently on the external, is it possible to do this?
View 6 Replies View RelatedServer (LVM):
500GB
320GB
I want to install a new 500GB and remove the 320GB, of course moving the data on the 320GB to the new 500GB. I have an external 1TB in enclosure that I can plug in to move the data over, but how do I move only the data on the 320GB to it?? I found this [URL]. But that is only to move the data to a new replacement disk, but my external is only temporary to move the data from the 320GB until I remove it+install 500GB, then move the data back. Not enough space on the 500GB already on server to move everything from 320GB to it, just in case that seemed the obvious thing to do.
I have been attempting to load the latest version of Shotwell only to find that it is not available on 10.04. Consequently I attempted to load 10.10 and found that it would not load from my DVD. Similarly 11.04 fell at the wayside. Tried downloading both OSs again and again but each time failure to load.
Having come across reference to test drive I thought that I would give it a go and followed the instructions on this. It appeared to download OK but then would not display the OS. Decided to remove but despite it appearing to be removed (from the information displayed in the terminal) it still is loitering on the menu.
Since that failure I think that it could be related I am now being continuously asked to authenticate the keyring, something that from my initial install I have never needed to use.
I'm looking for a way to quickly remove all data/partitions/boot records from my hard drives while running linux (distribution is irelevant). There are lots of ways to do this that I know of, but they all have some problems. Here's a list of what I've tried/thought of already. The most obvious is fdisk: Simply delete all the partitions. This usually works just fine and is very quick, but there are times it just doesn't....I'm realy not sure what gets left behind...I remove the MBR as well..but whatever it is, it's in the way. A couple other options are:
dd if=/dev/zero of=/dev/sdb bs=1M
shred -vfz -n 1 /dev/sdb
Both of these approaches are great if you're selling the components and want to make it very difficult for anyone to recover data. The draw-back is they take so very long to run. I've got four 1.5 TB drives that I've been writing zeros to for 2 days now. If you thought watching grass grow or paint drying was boring. A hundred years ago or so, when I was doing tech support for Windows 95 users we used this nifty dos-based debug script to wipe the hard drive. It was sort-of a last resort thing, but it worked beautifully, most of the time. If the customer had already formated, fdisked, fdisk /mbr, reinstalled Windows, but still couldn't get the thing to work, this would clean the drive so you could do a fresh install.
Just in case someone wants this, I'll post it. To use: first boot to some type of DOS environment in which you have the program "debug".
debug
-F 200 L1000 0
-A CS:100
xxxx:0100 MOV AX,301
xxxx:0103 MOV BX,200
xxxx:0106 MOV CX,1
xxxx:0109 MOV DX,80
NOTE: Type 80 for the primary hard drive - HD 0,
or type 81 for the secondary hard drive - HD 1.
In most cases, the primary hard drive is required 80.
xxxx:010C INT 13
xxxx:010E INT 20
xxxx:0110 (Leave this line blank. Press the <Enter> key to continue.)
-G
The message Program terminated normally appears. How to do something like that while running linux?
After a couple of years, I decided this weekend to replace my old slackware 10.2 with the latest stable version 13.1 64 bit. The change log tells me that with the new kernel 2.6, the old IDE/ATA system has been removed and the libata is used instead. That /dev/hda become /dev/sda and so on. No problem sofar, however ...
My FIRST hardware configuration was:
One SATA drives connected to the onboard SATA controller [A]
Two PATA drive connected to PCI IDE controller 1 [B & C]
Two PATA drive connected to PCI IDE controller 2 [D & E]
One PATA drive connected to the onboard IDE controller [F]
So initially the system had 6 disk drives. Booting from the Slackware install dvd, I found out that the drives are detected in the following order.
Onboard SATA controller
PCI IDE Controllers
Onboard IDE Controller
And the drives are get names in the following order:
/dev/sda : SATA disk @ Onboard SATA controller
/dev/sdb : first PATA disk @ PCI IDE controller 1
/dev/sdc : seconde PATA disk @ PCI IDE controller 1
/dev/sdd : first PATA disk @ PCI IDE controller 2
/dev/sde : seconde PATA disk @ PCI IDE controller 2
/dev/sdf : PATA disk @ Onboard IDE controller 1
sda upto sde are configured to us with LVM, so 4 disks are added to the volume group.
sdf is where Slackware is installed (sdf1 = swap; sdf5 = /boot; sdf6 /; sdf7 = /usr; sdf8 = /home; sdf9 = /var; sdf10 = /tmp)
Here is the problem:
When a 7th disk is added (another SATA drive @ Onboard SATA controller) then all names are changed like:
sda remains the same
sdb new added SATA drive
sdb -> sdc
sdc -> sdd
sdd -> sdf
sdf -> sdg
Obviously booting without LILO parameters results in a kernel panic, so I booted with: Linux boot=/dev/sdg root=/dev/sdg6. This does not give the kernel panic, but results in an option to check a drive and gives an option ctrl+d to boot normally. However it reboots and I get stuck at the same again.
How does LVM handle the naming shift of the drives? The 4 drives that are part of the volume group contain critical data!!! If needed, I can reinstall Slackware again from dvd with all 7 drives attached (to avoid naming shift), but how do I recover my volume group? What if one of the drives dies or is removed, then naming shift happens again.
I have a 7.9 TB logical volume I've created from 8 1 TB RAID 0 devices. The volume is formatted with XFS so I can resize when ready. However, I think I want to do something that is not possible. I have 2.5 TB free on my logical volume. I'd like to shrink the volume down to be 6 TB by getting rid of 2 of the 1 TB devices in the physical volume. However pvmove seems to require free extents in order to work. Do I need to add 6 TB of storage, pvmove everything onto it, and then decommission the original 8 1 TB physical devices from the volume?
View 5 Replies View RelatedI have a nightly scheduled script which creates a $vhostname directory under /mnt, mounts a windows box pointing to /mnt/$vhostname then rsyncs (pulls) some files/folders from the mount point. After this, I want to unmount the drive and remove the /mnt/$vhostname directory. Problem is that removing the /mnt/$vhostname directory sometimes ends up deleting all the files on the source! Example of script (stripped out lots of superfluous stuff):
Code:
vHOSTNAME='testhost'
vRSYNCFLAGS='-ahvz --inplace'
/bin/mkdir -p /mnt/${vHOSTNAME}
/usr/bin/rsync ${vRSYNCFLAGS} /mnt/${vHOSTNAME}/KAVSHARE /backups3/${vHOSTNAME}/
/bin/umount -l /mnt/${vHOSTNAME}
/bin/rm -Rf /mnt/${vHOSTNAME}
It seems that my umount line isn't disconnecting the mount, leaving the following line to literally delete all directories, recursively. Is there a way of safely just deleting the directory (ie: mount link) without linux accidentally trashing the whole source?
I'm using 'Adobe Flash plug-in 10.3.183.4ubuntu0.11.04.1', installed from the package repos on kubuntu, and since the last update, it has broken all flash functionality in both rekonq and firefox.I have tried removing and reinstalling the package multiple times, both with and without the browsers open. Can anyone suggest a way to restoring functionality?
View 7 Replies View RelatedI tried to install Ubuntu on an external drive, but it doesn't boot, but it installed GRUB on my main HD, and now I can't even boot Windows. I only get a "grub rescue" prompt. I need to remove GRUB. How to do it?
View 6 Replies View RelatedI am trying to install freeBSD on F14 (with LUKS encryprion). freeBSD doesn't detect hard-drive, probably coz of LUKS? Now what can I do within F14 to format harddrive and remove LUKS to get in a shape that I can install freeBSD or other OS.
View 1 Replies View RelatedI have a seagate SATA hard drive that was running a mythtv distro. It had 3 partitions, EXT3, swap, and XFS. I started having I/O errors on boot and saw error messages on both the EXT3 and the XFS partitions. I also heard some clunking sounds on the drive when it was reading, so I thought hell, the drive is dead.
I have since replaced the drive and everything is back up and running on the replacement drive. I thought hell, the seagate drive is toast, but I just want to verify it with some sort of tool. I have the hard drive in a Vantec NexStar external hard drive case (SATA->USB) and found there was a tool called badblocks. Ran badblocks on it, which ran for 24ish hours and found no bad blocks. I also didn't notice any clunking sounds while it was running.
I ran
Code:
badblocks -n -v /dev/sdb
Is badblocks a proper test to run on external hard drives or was I just wasting my time? Is there any way that I can really test it without removing it and connecting it with SATA to the motherboard?
Is Ubuntu like windows and can you download Ubuntu to a flash drive or external hard drive and if so what kind?
View 4 Replies View RelatedUbuntu Breezy 5.10 (don't suggest an upgrade - it works!) I'm trying to setup a script which updates some software on the hard drive from a directory on a USB Flash drive.After I've plugged in the USB drive and seen it recognised by automount:
Code:
ls -l /vol/USBDISKB
OK - shows me the directory and files.
Code:
#!/bin/bash
if [ -d /vol/USBDISKB ]; then
echo "Found USB drive"
else
[code].....
I know a bunch of commands and I am comfortable using the terminal, I even set a powerpc server but I can't figure out how to remove epiphany on this new computer I'm setting up. I didn't install anything with tasksel. I installed gnome and xorg afterwards... I load it up and 'startx' just fine. then I check around for the programs that were installed. I lik'em gimp, lot's of utilities. gedit. anyway I find epiphany, which I have already established that I dislike, I immediately go to the root terminal (another nice program that comes with gnome) and type apt-get remove epiphany-browser-data the output says it will be deleting gnome... however I have researched and found these are simpy meta packages that don't really matter.... however under the section that states all the packages that will be removed by autoremove there is a huge list... I doubt these packages are safe to remove. how to remove epiphany without removing a huge amount of probably needed software
View 14 Replies View Relatedwhat i did was, remove evolution mail from synaptic, what i wanted to do was just remove the indicator applet from the task bar. i read a bunch of bad stuff about removing evolution from synaptic vs just removing the applet.
im worried. did i break anything or put my security at risk. after, i used a command (older) (sudo apt-get install ubuntu-desktop)to install ubuntu desktop. because i thought that it would fix evolution. then i went to synaptic and installed a package called evolution. i rechecked evolution in applications menu. however, i notice that i have both a checkable evolution and two evolution icons. nothing 'seems' broken. im not sure if it ever was. and evolution calender pops up as normal, as does the the installed plain evolution. they both seems to be an exact copy of the other.
all i really wanted to do was remove the indicator applet. did i make a serious mistake. since ive had ubuntu, ive reformatted a lot because i was worried i made a mistake of some kind. however now im into the more "make a mistake and fix it stage' as im pretty happy with my current desktop and have worked hard to customize it. the command, sudo apt-get remove indicator-messages removed the mail icon. i still am worried that i broke something, or put my security at risk. also, now i have two mail icons. evolution mail and calendar, and another just called evolution.
These should be my last pleas for help with regard to Fedora 13. I've been unable to turn off the notifications that appear in the top right corner, despite a decent amount of searching on google. I can't remove any notifications package without removing a bunch of important software along with it. Also, F13 refuses to "Safely Remove" either of my external disks. I have to yank out the usb cord, touching wood each time.
View 5 Replies View RelatedSo i have a 16Gb Flash Drive and well i was wondering if i can make my ubuntu bootable from my flashdrive. SO if i go somewhere i have my Ubuntu with me with the programs installed in it. SO can i do this on my FlashDrive? if so how?
View 5 Replies View Relatedif there was a program where a flash drive can be used as a cd. The reason I asked is I used cd-writing programs (Brasero, k3b, etc) for music cds to rip into lossless formats (AAC and FLAC), and it sometimes does not come out right from ripping. And thought writing to the flash drive would get rid of those little errors in the songs since there are no moving parts..
View 6 Replies View Related