The module (and a few others) appear to be loading for my Audigy2 card. Sound is fine in KDE and all relevant applications. I have no sound outside of X. I've made certain that the volume is up on ALL outputs in "alsamixer" there's got to be something I'm missing. I've just checked....I connected one of the line outs from the sound card to an amplifier and used madplay to play a song in console. It worked fine. The problem seems to be that the sound is not being routed to the video card (via spdif) in console mode. This does work after I've started X as I have sound on all applications when running KDE.
I have a new Dell XPS 9100 with 9GB ram and ATI Radeon HD 5770 1024MB GDDR5. I installed a dual boot with Windows 7 and Ubuntu 64bit. Sound worked fine withthe Windows 7, but no sound with Ubuntu. Did a reinstall with just Ubuntu 64 bit (wiping out the Windows 7). No sound.I first did:
System -> Administration->System Testing (testing only for sound). I get: 0 [Intel ]: HDA-Intel - HDA Intel
for my small home server i want the machine to NOT start x11 automatically but to enable remote logins via xdmcp.The problem: xdmcp is controlled by gdm. If i disable gdm to have no x11-login-screen xdmcp does not run...Is there any way to start gdm without starting x11 on the console?
I have one application which seems to work well when started from command line but cannot load documents when started from menu and also the cursor has form of the clock for some time after executing the application from menu.I wonder why there is so different behavior and how to make it work well anyway.
I recently installed ubuntu 10.10 on my Acer Aspire laptop 5745G-7671 laptop. It has an Nvidia Geforce gt 420m dedicated card, and an Intel HD integrated GPU. The problem is, I recenly installed a driver for it (because ubuntu had already found a driver in hardware management). After I did that, everytime I try to start ubuntu, I can no longer see any GUI interface.I have tried everything. I tried restarting X (which doesn't seem to work in Ubuntu 10.10, and tried holding CTRL+ALT+F7 too, but it just displays a few "[ OK ]" messages.
I have installed KDE and all the software for it to run on my server through the serial console but when I go and run "startx" I get the following and KDE doesn't start running.
root@u15434060:~# startx X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-28-server x86_64 Ubuntu
After installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated. 21:24:04.868 Statistics reset. 21:24:04.886 ALSA connection change. Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
New build to F12. Sound was fine in F11. Now, massive distortion. I have tried every possible permutation of settings. With the main volume control in the top taskbar, there are two positions of level setting where the audio drops to a normal level and sounds OK but any application changing the level or starting to use the Pulseaudio changes the level and its loud and massively distorted again.
In the Pulseaudio manager->sink->alsaoutput.pci-0000-00-11.5.analog-stereo -> properties-> show volume meter, the audio is always maxed out in level. I have tried everything, its unworkable right now. Its possible to start alsamixer from terminal and adjust settings for good audio but any future change reverts to distortion. All changes in Pulseaudio Dev mgr or vol control etc change the audio as they should but do not affect the problem.
I just installed 11.2 kde desktop everything works fine except no sound when I play ..... and watch movie online worked with my audio and video files in my computer only
Using Dell Inspiron 1564. In windows 7 and other distros like ubuntu, openSUSE sound was perfect. However the sound here is pretty low. Not sure if there's some configuration I am missing. I ran alsaconf, maxed out the bars in alsamixer and did a alsactl store. But the sound is still low.
Code: # lspci | grep Aud 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 02:00.1 Audio device: ATI Technologies Inc RV710/730
I recently upgrade my motherboard to ASUS P5G41T-M LX. The audio spec is as follows: ALC887 8-Channel AUDIO CODEC I set the PC as dual boot, win7 and Fedora 15. When I am in win7, the sound volume is normal, but when I am in F15, the sound volume is very low, compared to in win7. I already set the volume to max in audio settings when I do the comparison. How do I get the volume up?
I have a weird problem where the playing any track from Amarok results in no sound being heard from the speakers. However, from everywhere else - YaST audio configuration, openSUSE startup, VLC, SMplayer et al - the sound is heard fine. I have no clue as to how I can go about fixing this. Hoping someone could assist me with this. I have a Dell Inspiron 1520. Here's the link to the output of alsa-info.sh: [URL] My Smolts system profile: Show Box my /var/log/messages keeps recording this:
I have an old Acer Travel Mate 290 with OpenSuSE 11.3 (LXDE) 30G and 240Mb RAM. I don't have sound in the internal speakers, I only have sound through the headphones. Here you will find the information of alsa-info.sh [URL]
When I type: rpm -qa '*alsa*' alsa-utils-1.0.23-1.8.i586 alsa-plugins-1.0.23-1.9.i586 alsa-1.0.23-2.12.i586 alsa-firmware-1.0.23-1.2.noarch alsa-oss-1.0.17-29.2.i586 .....
Running 11.3 and sound works ok in desktop, mplayer, firefox (flash) etc. System is using Pulse audio. I think that this worked before but I'm not sure. I don't really use this system. I do boot it every couple of days and update it. Backend is on desktop, and live TV and recordings show fine but without sound. What do I need to check?
After trying at least a dozen distros, I'm a happy OpenSuse user now and hoping to stick to it for some time now. I am running it on HP DC7800 workstation and the performance is superb. One problem I have is that my sound is not working. If I plug-in the headphone to the front jack, I sear sound just fine but nothing from internal speakers. Here are some details:
I have an issue where my laptop speakers work just fine, but when I plug in headphones, I get no noise. I'm using openSUSE 11.4.I found others with the same issue, but this guy's solution looks like he might be using some different version and his solution doesn't work (can't find the file he edited).
I did a clean install of ubuntu 10.4 on 2 pc's and got the problem underneath on both of them. I can play all kinds of cd's, dvd's. The soundsystem is working fine. If I want to listen to a radio-station in a browser (be it firefox, be it chromium) I don't hear anything at all. No error-messages are generated. I installed/removed various soundmodules, but all to no avail. If I paste the url of the strean in VLC or Rythmbox, then I can hear the music! At booting-up, I get the following messages in the user.log-file :
Aug 18 20:36:27 Ubuntu-Bernard pulseaudio[1093]: module.c: Failed to load module "module-rtp-recv" (argument: ""): initialization failed. Aug 18 20:36:27 Ubuntu-Bernard pulseaudio[1093]: module-gconf.c: pa_module_load() failed Aug 18 20:36:27 Ubuntu-Bernard pulseaudio[1182]: pid.c: Daemon already running.
I must say that initially I only got the message "pulseaudio[1135]: pid.c: Daemon already running." By the way. I can listen to some stations, eg. [URL]. In the latter case, an iplayer-console is being opened.
To start off, I am about 3 days into my new ubuntu operating system. I am a complete newbie, but i have picked up alot in the last couple days. My sound was previously working, but the microphone was glitching when using skype. After running a bunch of different commands in terminal that were posted on forums from all over the internet, I rebooted my computer to find no sound. I have searched the forums again and tried many different command lines in terminal to no avail. My system setup is found here: [URL]
I don't get any sound from my left speaker. With my headphones plugged in though I get sound in both speakers. I've upgraded my Kernel to .36. I'm using Ubuntu 10.10. I'm on an MSI A7200 which is a great laptop but apparently a very rare one. There's like no info on it at all on the internet.
I've just installed Karmic 9.10 to a new 500GB sata in a friends PC and it boots and runs fine; internet and everything just works. Just reinstalled XP-SP3 to old 80GB pata drive in same PC, it boots ok, but has no sound, poor graphics and network is limited to 1394 - no ethernet.
I built this PC about 3 years ago and it had been running XP with SP2 then SP3 installed, and everything worked fine. So over the past day I have installed XP-SP3 (slipstreamed disc) in it 3 times now, then went back and tried XP-SP2 (earlier slipstreamed disc) twice with same result - no ethernet, poor graphics, no sound?
But it all works fine in Karmic?
I ran Karmic's disk utilities (Palimsest) on the old 80GB and it tested fine, no problems at all.
PC comprises Gigabyte M55plus-S3G m/board, AMD 3800+ 2.4Ghz CPU, 1 GB RAM and a 64MB NVidia graphics card (can't recall model)
Is it possible MS built 'crippleware' in to XP, or could there be a hardware problem that Karmic didn't detect (doubt it)
Karmic is going to be the main OS now, so I don't think the loss of XP is a problem, but friend still wanted to be able to boot XP, even though XP is installed in Virtualbox in Karmic (I did this by importing a previously saved XP 'appliance').
here's some background info: purchased a brand new netbook last week (samsung n130) and thought i'd set up a dual-boot to accompany the pre-installed windows xp sp3, and after a bit of research i decided upon installing ubuntu as my preferred linux os, which i believe at the time was and still is version 10.10.
but the problem is: when i attempt to watch flash videos (from videos for example) the video streams fine, but the audio is very jumpy and skips back and forth every few seconds. occasionally there are periods of say 10-15 seconds where the audio is ok. the problem exists on both firefox and chrome, and is exclusive to ubuntu. keep in mind that i'm an absolute novice when it comes to linux/ubuntu, etc.
I have mounted an NFS share with ISO images on my kvm Server. If i connect such a iso to a VM (using virt-manager) for installing a operating system i get the following error on startup: Error starting domain: internal error Process exited while reading console log output: char device redirected to /dev/pts/1 qemu: could not open disk image /mnt/iso/public/Linux/Distributions/Debian/debian-504-amd64-netinst.iso: Permission denied
The problem is definitly that kvm (or qemu or libvirt-bin, i don't know) tries to set permissions (rwx owner for libvirt-qemu, --- for kvm group, --- for other) on the file, although it has read permissions. Is it possible to change this behavior?
Whenever I start up Skype, the entire sound goes on my PC. Even when I shut Skype down, I still don't have it. The only way I get it back is to reboot the computer. Is there a setting I need to change?
I am using a laptop with a built-in sound card, but have a higher quality USB sound card that I plug in to listen to music. The problem with this is that I have to go through the sound options to change the sound card every time I plug the USB card in. what i'm hoping to do is write a simple script to do the job so that I only have to click an icon on the desktop. does anyone know the commands to do this?
i run opensuse 11.2 with kdebase4-4.3.5-0.1.1.x86_64 on a hp elitebook 8530w. when i start opensuse and the sound is initially turned off, it will be turned on while starting. if i turn it of manually (by pushing the appropriate button) it will be turned on again. I assume that there is a script like .bashrc for bash scripts which tells the system to turn on the sound. Does anyone knows whether there is such a script and if yes, where can i find it and edit it?
If I run Amarok right after ubuntu starts, and then start a movie, there is no sound. It doesn't matter that the playback in Amarok is paused, stopped or active, there is no sound in the other player. Even if i exit Amarok, i don't get any sound. It is important to note that the other player is definitely a gnome application. I tried playing a song in Rhythmbox after Amarok was started, or play a video in Movie Player: no sound. I get sound from KDE video players, but the video doesn't work there, so that isn't an option. The only explanation i can think of, is that Amarok somehow "occupies" the sound drive, and it remains "occupied" even after the application was closed. Because if i start Movie Player before Amarok, this problem never appears.
Im looking for console tool that will output most detailed information about sound file (particularly mp3). Tried to use different tools (id3, lame, ffmpeg)
I recently installed KDE in my ubuntu 10.10. To access KDE, I want to use startx /usr/bin/startkdeBut using it disables sound in KDE (Sound is working fine in GNOME). It doesn't sound for anything like login sound, totem, mplayer or any other playerBut when I press Alt+Ctrl+F1 to change to virtual console, the playback resumes from where it was in time and when coming back Alt+Ctrl+F7 and the time in totem (or any other player) doesn't move. While log out also it doesn't play logout sound and doesn't logout, so I have to press Ctrl+Alt+F1 so that logout sound play then it exits.When starting KDE by kdm or gdm, the sound works normally. But I don't want to login again using kdm or gdm and not to use root user to start kdm or gdm.I don't know what is the difference between when KDE is started by startx or by kdm/gdm where the same user login in kdm/gdm as that for startx
