From some Googling, I've found that you can use Bootcamp to install Linux Macbook.However, I have a Macbook air and do not have sufficient disk space. I was wondering if I could install it on an external drive, and boot it from the Macbook? I think that the problem is the bootloader. But, if I still use Bootcamp to install Ubuntu, it would set up the bootloader, and then I would just install to an external?
I have REHL 6 Desktop. I have a macbook pro 7,1 with nvidia graphics and (I believe)a nvidia sata controller. I have fedora currently installed with no problems during or after installation ( with a few drivers of of course).
When I boot with the disk i burned ( works on other computers) it comes up of a list of devices to select and when i select local CDROM or DVD it goes to select drivers. So, then I tried "burning" the installation files to an external hard drive then I used the DVD to boot and selected Hard Disk then selected SDB1 (path of external HD). With this method I get to the Graphic installation screen and can go to the part were it says custom partitioning. I select ok then it say the only disk that is available is SDB1 (EXTERNAL).
Manually mount or fix my external hard drive. I can't format the drive because I have important data on it. The drive is 1TB Select USB 2.0 Desktop Hard Drive from Iomega. When I plug it in, a message appears that reads:
"Error mounting: mount exited with exit code 32: mount: wrong fs type, bad option, bad superblock on /dev/sdb2,missing codepage or helper program, or other error. In some cases useful info is found in syslog - try dmesg | tail or so".
Also, I plugged in the drive, typed the command "sudo fdisk -l" in the terminal, and received the following:
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
WARNING: GPT (GUID Partition Table) detected on '/dev/sdb'! The util fdisk doesn't support GPT. Use GNU Parted.
Earlier this year I encountered a problem with my external hard drive; it would not mount automatically and I kept getting an error message. Last time I was able to fix it by typing in the terminal 'sudo fsck /dev/sdb2'. Once again it's not mounting automatically and I'm not even getting the error message. I can't format the drive because I have important data on it. The drive is 1TB Select USB 2.0 Desktop Hard Drivefrom Iomega. Also, I plugged in the drive, typed the command "sudo fdisk -l" in the terminal, and received thefollowing:WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 120.0 GB, 120034123776 bytes 255 heads, 63 sectors/track, 14593 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
I have ubuntu installed on one hard drive (laptop hard drive). The hard drive has some bad sectors on one of the partitons. I have installed a new hard drive and now wan to import the ubuntu installation on the new hard drive. What is the easiest way of doing this? I dont' want to start fresh because I have a lot of custom drivers and settings saved.
Im using rhl 5 on my new hard drive,i want to transfer data from my older hardrive (which has windows xp installed,one partition has fat32 and another has ntfs filesystem) to the new hardrive...
This is my first even moderately successful venture with linux, I had a virus ridden HD which I formatted, and then installed Mint distro. I then shut down, removed the HD and turned my desktop back on. I then receive the Error 15 notification while booting, and don't know how to solve this problem. I've tried sudo update-grub, but I get a notification that the terminal can't find it. Would it be safe to delete anything concerning the GRUB from my primary OS system files?
I have installed Isadora on 8gb USB drive. getting to like this OS.a lot. Problem is I will soon be running out of space and lack speed. I would like to transfer all my data and downloads to my hard drive permanently. Can I make my memory stick installable?
Have a machine running Fedora Core 4 that has been used as a mail/web server. Now want to transfer drive to a newer machine. Can this be done without having to re-install fc4 and what becomes of current network settings
i have a 200gb hard drive and im upgrading to a 1tb hard drive and i want all my stuff like settings and files on my new hard drive whats the best and easiest way to transfer all my stuff from the old hard drive to the new one
I am running dual boot Ubuntu and windows 7 but have decided to ditch windows and go permanently with Ubuntu. How do I save my data files (email addresses etc.) to an external hard drive for downloading back on to my laptop when I have reformated it.
I have a 500 gig external usb, and a few 8 gig flash drives. If i copy a file (say a movie or large file) from my primary hard drive (80 gig WD formatted to ext3) to a usb drive it transfers very slowly, about 2 mb/s. But if I copy a file off my secondary internal drive (40 gig seagate formatted to ntfs) it transfers full speed (25-30 mb/s) Its also very slow transfering between internal hard drives (again, no more than 5 mb/s) I checked and as far as i can tell both drives are running in DMA mode. Any reason my primary seems to be causing this bottleneck? it seems to preform fine otherwise (as it is the drive with my ubuntu installation on it)
how to transfer large files from my laptop to external hard drive. Problem occurs when I'm sending Blu-ray films (4.4GB) to external, gets to 4GB and then comes up with error. Is there any way of breaking it up and then merging when it reaches the hard drive or is there a way of sending it as one whole file.
I just got a new hard drive and need to transfer my dual boot window 7/Ubuntu 10.10 onto the new hard drive and be bootable. Is there an easy was to do this?
I got Ubuntu Desktop 9.10 32bit installed on a P4 machine. A little hard is hosting the software. I wanted to use this like a file server and after installation was up and working I added a Western Digital - Caviar Black 1TB Internal Serial ATA drive.
It does not even know it's there. I did a search and since i am in desktop I am using a GUI and do not know how to add a hard drive with text string, or where to do to do it.
How can I add this hard drive? Windows seemed to notice the addition.
i would like to know how i can put a shortcut from my hard drive (the internal one) one my gnome desktop (like in mac os x). if possible it would be nice if i also could see the space / remaining space all the time.
i tried to create a shortcut from filesystem, but right click and send to desktop does not work. also pressing ctrl+shift and dragging the filesystem symbol to the desktop does not really work.
The CDROM/DVD drive in the new computer was defective. Everything is working now.
My ancient Dell desktop finally kicked the bucket but the hard drive was relatively new (less than a year old).So I replaced that old desktop with a new desktop (not Dell this time) and decided to just plug in the old hard drive - to see what happens.Well, I was pleasantly surprised when Debian booted up and executed as normal (ok then, ALMOST normal)!
The problem is that the CDROM/DVD-RW is not recognized.For example, I have an audio CD in it, but neither file managers or multimedia players can see it (where 'it' is either the CD itself or the CDROM device).
I've tried GUI applications like mplayer, kplayer, Vlc, dolphin, pcmanfm; and I've tried the command line as well (bash).Short of doing a complete reinstall of Debian, is there a way to get it to recognize this 'new' hardware?
i'm using karmic. today i mounted a new hard disk, 1 Tb, as per the instructions i found in the wiki. first of all i wish to express my gratitude to all who contributed there. the instructions were most helpful and everything went fine. my new drive can be accessed for both read and write and automounts like the good drive it is.
however, there is this this icon for the new drive on my desktop. is there a way to get rid of it? i can access the drive perfectly well through the places menu. i like my desktop clean...
I am under orders from She who must be obeyed that I must fully backup her data as she had a loss of information due to a hard drive failure.Presently I am having her make available her info as shared documents on her XP system and I am copying this data over to my Ubuntu (Karmic) desktop. I would also like to have a USB Hard Drive save the information in order that I can safely store this away from a live system.
So far things are working not too bad but She wishes to have all her backup that was available on DVDs and salvaged from posted material assembled as one complete resource. I can with some effort put this into some semblance of order but do not feel like doing the work twice.I would like some method of easily copying / transferring data to the external HD. Additionally I would like to be able to update data daily and be able to with minimal effort have this synced onto the external HD.
I recently upgraded my computer and tried using same hard-drive in new one. Fedora 11 booted and allowed me to log-in. But system is un-usable as there are no Icons on desktop and no panels. While I know that initial installation is based on hardware profile of previous computer, is there any work-around to make it work without having to install fresh. Also, If I choose option "replace previous Linus version" from LiveCD, will that preserve my personal data and settings?
I managed to have the ATI Catalyst driver (10.12) installed on a machine with F14 x86_64, Radeon HD 57xx and I also installed the ATI SDK Samples for OpenCL. ATI Catalyst reports OpenGL fine, glxinfo is fine, all OpenCL samples that do not use OpenGL are working fine. I used the "install to hard drive" feature of the F14 x86_64 desktop disk. Problem: which headers and libraries do I need to install in order to use OpenGL in an application? I would also like to have the OpenCL working on the system for another application.
Previously I had a small application working with SDL + Mesa library on FC9 using software rendering, but after F14 installation and ATI card addition the app is not working. Files gl.h, glu.h are missing. I checked the system and I found only a glew.h header. I tried linking against glew but it complains about glu.h (file not found).
I looked on the Internet and I found a post that someone suggested installing xorg-x11-devel, but there is no such package. I tried installing libX11-devel...f1.x86_64 but the gl.h/glu.h were still missing. I tried compiling the latest Mesa library with make linux-dri-x86_64 and it complains about egl. All dependencies have been checked (dri2proto, X11 version, libdrm, kernel version). After Mesa installation ATI Catalyst is no longer reporting OpenGL and glxinfo is not working. Am I supposed to install just the Mesa library without the ATI driver? Am I supposed to use glew only with the ATI driver?
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
