Does anyone have a workaround for non existent model specific drivers for my HP Laserjet CP1525nw printer?
I bought it advertised as Linux compatible but cannot locate drivers for it. SUSE 11.2 by the way.
It is HP themselves that sell it as compatible with Linux and are refusing to accept that their own UK website product description is misleading.
Where can I find driver and install it on backtrac4 for hp laserjet 6l and scenjet 2400?
View 1 Replies View RelatedAlthough HP claims driver is compatible with 9.10 Ubuntu can't seem to find driver.
View 3 Replies View RelatedHow to find printer drivers for the following printers
HP Laserjet 1020
Cannon iP1900
i used ubuntu maybe for a year but i dislike unity and i installed gnome 3 via ppa but it wasn't so stable.now i installed fedora on my netbook and really like!Gnome 3 is very stable but i have a problem with my printer.Fedora notices it plugged in my printer HP Laserjet p1005 but it doesn't find any drivers.
View 1 Replies View RelatedI am looking into 1026TT-TF and 6016TT-TF for a CentOS 5.4 or 5.5 64bit installation:
SuperMicro 6016TT-TF
SuperMicro 1026TT-TF
It will be used as a Web-server mostly. Since they are twin nodes, one node will be one strong firewall. I have been checking all over and I can't find any driver, bios, or issues with this specific motherboard from Supermicro and Intel 5500/5600 series CPUs. Is there anything that would concern you with these servers?
I am also looking to put in a 4-port Gigabit LAN card into one node which I doubt makes any difference in the whole equation. Further more, and most importantly, the first one takes only 2.5" HDDs and the second option accepts 3.5" HDDs. Other than size availability and price, are there any concerns regarding performance when chosing one over the other? System which accepts 3.5" HDDs only takes two per node so I have to opt for 1TB drives. For the 2.5" system I can go with 4 of 2.5" HDDs of 500GB in size. Either of options selected will be setup in RAID-1.
LaserJet Pro CP1525NW. HP website mentions that it is compatible with Linux. However, this particular model cannot be found at Linux Foundation's OpenPrinting Database. As you can see here, there is no mention of HP LaserJet Pro CP1525N which makes me worried. Also, the printer is not listed in HP Linux imaging and printing.
What are your thoughts and do you have experience with this printer? What other Color Laser printer do you recommend? The fact that the that printer's specification on HP website says that it is compatible with Linux, yet it is not listed on HPLIP nor in Openprinting makes me nervious.
How do I give permission to a logged in user to stop/start a specific service without entering a root/sudo password? So they can do a simple "service SomeService stop|start" It is for a headless Ubuntu server.
View 5 Replies View RelatedI need to search a bunch of files in a specific folder for a specific number and add all the numbers together to a total sum. I use Rsync everyday, everytime I run rsync i get a logfile (rsync output) witch contains the textstring "Total bytes sent: xxxxxx".
The "xxxxx" can vary in lenght. I need to extract the "xxxxxx" from each file and add the numbers together to a total size over a week or a month. Is this possible? And I wish to only use bash. One way of doing stuff at a time my friends .
my system I want user1 and only user1 to be able to mount and unmount a specific partition, this partition contains backups and is usually mounted read only, needs to be temporarily mounted read/write by user1 while doing the backup.user1 is an unprivileged user. I've read that the user option will let any user mount the file-system (and only that user can then subsequently unmount it) and that the users option allows any user to mount or unmount the file-system.I also found this in mount's man pageQuote:The owner option is similar to the user option, with the restriction that the user must be the owner of the special file. This may be useful e.g. for /dev/fd if a login script makes the console user owner of this device. The group option is similar, with the restriction that the user must be member of the group of the special file.So it looks like I'd need a login script for that user to make the user owner of the device file (/dev/voiceserv/backup in this case)
View 7 Replies View Relatedfor example
else {
for fileDOC in $location/*.doc
do
[code]...
I'm trying to configure our mail server to block email from a specific sender reaching a specific recipient. In other words, if one of our employees is getting harassed by a 'stalker', how would one go about blocking, at the MTA (Sendmail) level, a specific sender email address from reaching a particular users inbox? We do not want to capture the email - simply block it before it consumes server resources.The Sendmail server (MTA) is a front end to our Exchange server so no user accounts exist on the Linux server. We simply use it as a SPAM and Virus scanner then forward clean email to the Exchange server.
View 6 Replies View RelatedI want to replace specific character in a file after every specific line. example as follows.
O 000000000000000000
A 111111111111111111
C 222222222222222222
[code]...
I am trying to play some of my old dvds, they play in Windows 7, but I get the following using vlc in Fedora 12 (all software in up to date).
[jerry@bigbox Desktop]$ vlc dvd:///dev/sr0
VLC media player 1.0.4 Goldeneye
[0x93058b0] main libvlc: Running vlc with the default interface. Use 'cvlc' to use vlc without interface.
libdvdnav: Using dvdnav version 4.1.4
libdvdread: Encrypted DVD support unavailable.
libdvdnav: DVD Title: OKLAHM
libdvdnav: DVD Serial Number: 26654F88
libdvdnav: DVD Title (Alternative): OKLAHM
libdvdnav: Unable to find map file '/home/jerry/.dvdnav/OKLAHM.map'
libdvdnav: DVD disk reports itself with Region mask 0x00fe0000. Regions: 1
libdvdnav: Suspected RCE Region Protection!!!
libdvdnav: Suspected RCE Region Protection!!!
[0xb7300710] main input error: ES_OUT_RESET_PCR called
[0xb7300710] main input error: ES_OUT_RESET_PCR called
libdvdnav: Suspected RCE Region Protection!!!
[0xb7300710] main input error: ES_OUT_RESET_PCR called
[0xb7300710] main input error: ES_OUT_RESET_PCR called
I have a dual boot Win7/Fedora 12 laptop. I set the region to 1 on the windows side.
I'd like to upgrade my 9.10 desktop to 10.04 but I can't get past step 1.I've done alt-f2 and issued update-manager -d, but no "New distribution" option is presented.I've clicked the "check" button and updated all my repo information but that doesn't help.I've done a wireshark trace and observed that the update-manager's requests get through the corporate firewall, and responses come back.Somehow it determines that no new distro is available.I'll explore further if someone could help me out with getting hold of the relevant update-manager source code.
View 2 Replies View RelatedI'm working a program to implement a simple multi-process browser. The browser works by having a ROUTER process as the parent of everything else in the program. There's another process called the CONTROLLER which is part of where the user can input information. To tell the ROUTER to make a new tab in the browser the user activates a function from the CONTROLLER to send the create new tab information to the ROUTER:
Code:
void new_tab_created_cb(GtkButton *button, gpointer data)
{
[code]...
Fedora 11 was being run on a Toshiba Satellite Intel Core2 Duo @ 2.1 with 180 gig hard drive and 3 gigs of RAM. The laptop is encrypted, using Fedora's encryption option when installing 11. Just finished upgrading using the upgrading DVD. Fedora boots and runs fine, when update manager is accessed it says 338 updates available. When updating is attempted there is one unavailable package after another. Have attempted to break the updates down into manageable sections to no avail. There is no repository manager (that can be located). Where to from here?
View 1 Replies View RelatedI just set up Suse 11.1 64bit and installed Virtual Box 3.1.6. I had it running previously with no problems, however, this time I can't get it to recognize any USB ports. In fstab I entered the line
None /proc/bus/usb usbfs devgid=1000,devmode=664 0 0
and ran mount -a (no go)
I loaded Vmware Player and it uses the USB ports perfectly fine (go figure) I added to the "none" line auto,
busgid=1000,busmode=0775,devgid= etc.
Still a no go - vmware uses them no matter what I have in "fstab" what am I missing with Vbox?
I've been trying for a long time to send emails via gmail, but without any success.
I always got the following error: "Must issue a STARTTLS command first"
I then added the following to my main.cf file: smtp_enforce_tls = yes
I now get this when running postqueue -p
(TLS is required, but our TLS engine is unavailable)
How to set up gmail, but none worked.
This is what I added to main.cf:
WARNING No path in service <printername> - Making it unavailable!
I'm runing a CentOS 5.4 server. I have a Windows NT Domain. My CentOS server is in the Domain, Samba works fine (both ways). I haven't needed to print from the CentOS box until now. I have a shared HP LaserJet 2100 printer connected to a workstation and shared. Everyone can use it. I'm not using SELinux
I want to be able to print from the CentOS box to that printer.
I used Webmin to set it up, but no joy so I've searched the entire web for any info to do it manually but I'm stuck.
My smb.conf file looks OK. It's just the printer.
I installed a while ago two CentOS 5.3 servers. One of them was running Samba and another OpenLDAP. I configured Samba to act as a PDC on the network and everything was working fine. I was already on policies configuration and desktop migrations.
The following problems are Samba server problem, LDAP server is on hold until I figure out the first problem.
Software conf:
Hardware conf:
One day, both servers began crashing, and after a while, it showed the following during the boot on Samba:
After that, ALL CentOS installations had this problem after yum update, epel installation and some smb.conf modifications:
I figured out it might be EPEL (i did installed yum-priorities and tryied updating the base sistem BEFORE epel installations), so I installed the system without EPEL yum repository. After some good and relieving 15 min working, the system crashed AGAIN after yum base update and showed the following on boot time:
And it stops right there.
Maybe some wrong kernel update? the first time it crashed in one way, with running updated system (After the first update, no manual update was done). The sequel problems were all after Kernel update and EPEL. The last one was just after Kernel update. I'll try one last time with NO updates, but i can't run the system like that.
I can't do anything that might one day crash, it's a 6000-7000 user gov environment, but i don't want to install another distro, so if I don't figure it out, they will order me to.
I configure squid to work with squidGuard , and all thing work properly , but there is problemfirst look to this squidGuard.confdhhome /usr/local/squidGuard/dblogdir /usr/local/squidGuard/log
src blacklist {
ip 10.0.0.5
}
[code]...
(and new-ish to Linux in general) and would appreciate some assistance with fixing a problem I'm having with getting wireless working on my computer.Computer specs: Lenovo Thinkpad Edge 520, I5Wireless card: Intel WiFi Link 1000 b/g/n(Note: I also have a Netgear USB wireless adapter, and trying to use this does not solve my problem)I cannot activate wireless. When I go to Network Settings > Wireless, it is listed as "unavailable", and "off". When I try to switch wireless "on", it says "disconnected", but then immediately switches back to "off".Having tried to browse various forums and such for a solution, I tried looking for the file ifcfg-wlan0 under /etc/sysconfig/network-scripts, but it doesn't exist
View 4 Replies View RelatedI am facing a problem with Linux fedora 9 mail server. I cant send any mails outside, since in log I found that
dsn= 5.0.0, stat = service unavailable
I have a directory that needs to be owned by nginx user and I need to access it via other users in order to add/edit/delete files in it. So I created a group called www and added both then chgrp -R on the directory. However I am still getting a "unavailable to access no permissions" sort of error in my SSH/SCP/what ever you want to call Mac's Transmit.
ls -a output
drwxr----- 3 nginx www 4096 Jul 17 23:56 nginx
I have had ubuntu installed for a few months now and have been loving it. Yesterday I wanted to get JDK installed for a found a forum that said how to install it on ubuntu. The installation was not a success (I am not sure why because I am not skilled when it comes to the command line and I didn't understand the error). Later, I tried to install a different application just through the ubuntu software center and it said it was waiting for a different software manager to finish. I didn't understand what was still running because I had all other applications closed that I know of.
Once I restarted the problem was the same. Then I found a bug where people had the same problem with the software manager and they entered this and fixed it:
sudo dpkg --configure -a Now whenever I try to apt-get anything I get:
E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
Today when tried to install a software from the terminal...d command dint work. Check this.
calvin@calvin-desktop:~$ sudo apt-get install pidgin
[sudo] password for calvin:
E: Could not get lock /var/lib/dpkg/lock - open (11: Resource temporarily unavailable)
E: Unable to lock the administration directory (/var/lib/dpkg/), is another process using it?
calvin@calvin-desktop:~$
It says that it cannot get lock! I have installed ubuntu along with windows! and drive E: is in windows.
I've installed transmission-daemon on my headless Ubuntu 11.04 server and use the web interface to manage it. This is all working fine. However, after a reboot it seems that transmission daemon starts but the webinterface is unavailable. I get this in the syslog after a reboot:
Code:
Jun 22 10:54:27 localhost transmission-daemon[703]: Transmission 2.31 (12441) started (session.c:706)
Jun 22 10:54:27 localhost transmission-daemon[703]: RPC Server Adding address to whitelist: 192.168.*.* (rpc-server.c:805)
Jun 22 10:54:27 localhost transmission-daemon[703]: RPC Server Serving RPC and Web requests on port 127.0.0.1:9091/transmission/ (rpc-server.c:982)
Jun 22 10:54:27 localhost transmission-daemon[703]: RPC Server Whitelist enabled (rpc-server.c:986)
Jun 22 10:54:27 localhost transmission-daemon[703]: RPC Server Password required (rpc-server.c:989)
Jun 22 10:54:27 localhost transmission-daemon[703]: Port Forwarding Stopped (port-forwarding.c:181)
Jun 22 10:54:27 localhost transmission-daemon[703]: UDP Failed to set receive buffer: requested 4194304, got 262142 (tr-udp.c:75) .....
I am running ubuntu 10.04 and am trying to get updates via the update manager but continue to get the following errors:
"E: could not get lock /var/cache/apt/archives/lock - open(11:Resource temporarily unavailable)
E: Unable to lock the download directory"
I'm using Google Chrome & Arch Linux x86.When I try to log in to my Gmail to check my Email I get this;Quote:The webpage at "A very long URL" might be temporarily down or it may have moved permanently to a new web address.And when I click on 'more information about this error' I get this;
Code:
Error 107 (net::ERR_SSL_PROTOCOL_ERROR): Unknown error.
I've updated openssl and have both SSL 2.0 and 3.0 enabled in options and I still can't log in