Hardware :: Get Ubuntu To Print In Reverse Order?
May 8, 2010
I have a BROTHER MFC-495cw and i do alot of printing so when i as openoffice, adobe etc to print a document it always comes out 1st page first with the last page on top (when i do it this way i have to go in and turn everything around i'm tired of doing that) i want it to print the page from last to first that way the first page is always on the top of the stack
i am running ubuntu karmik koala and i already mentioned my printer model
View 4 Replies
ADVERTISEMENT
May 26, 2011
I am running fully updated ubuntu 10.10 and now, since 2 days ago, when I open a file
in open office, gimp or gedit etc the directories and files now appear in reverse alphabetical order.
View 8 Replies
View Related
Apr 27, 2009
Here is what I have so far.The program receives and echos characters without syscalls. I am trying to add 2 procedures(rev7 and putint)Rev7: Reverses the least significant 7 bits and outputs $s2Putint: Prints the decimal value of $s2.When i run it, it echos the character then prints a "P". I have no idea where that comes from.Everything seems correct to me but I do not understand why it does not print the decimal digits
Code:
.data
hello:.asciiz "Enjoy This Program
[code]....
View 2 Replies
View Related
Aug 12, 2010
I'm trying to write an extension to PHP which means coding in C. I'm really really rusty at C coding and was never very good at it.
Can anyone propose an efficient, safe, and [hopefully] future-proof way of reversing a double? Keep in mind that it should work on as many systems as possible and on 32- and 64-bit systems (and on ???-bit systems in the future?). Will the size of a 'double' ever change or will it always be 8 bytes?
I've tried this and it doesn't work...the compiler complains about "invalid operands to binary" because I'm trying bitwise shiftw on a non-integer.
Code:
x = (x>>56) |
((x<<40) & 0x00FF000000000000) |
((x<<24) & 0x0000FF0000000000) |
((x<<8) & 0x000000FF00000000) |
[Code]....
View 3 Replies
View Related
Apr 6, 2011
I'm curious as to whether anyone else has experienced this, and has an explanation. I'm running Kile 2.0.85 under openSUSE 11.3 32-bit on a Lenovo X61. Twice in the past couple of days I've had the bizarre experience that, upon a sudden burst of typing my text has appeared in Kile in reverse order.
no ngis fo ecnacifingis eht fo redaer eht dnimer esaelp ,dniw cihportsoeG a htiw snoitalumis eht gnicudortni erehw ,Note the perfect reversal (I rarely type that accurately in forward mode). A day later it happened again: )1.3.5( noitceS fo hpargarap dnoces eht ni ,niaga ecnO.I've been using Kile for almost a year now, on two different machines and under several versions of openSUSE. Nothing remotely like this has happened before. I don't think I have a virus. I can't think of any event that may have heralded this mystical behaviour. Cheers, jdw
View 2 Replies
View Related
Oct 12, 2009
I am using RHEL5. These are my config files:
Code:
options {
listen-on port 53 { 127.0.0.1; 192.168.14.54; };
listen-on-v6 port 53 { ::1; };
directory "/var/named";
[code]....
View 3 Replies
View Related
Aug 18, 2010
in my text file of 5 columns 2 column is in DDMMYYYY format. (ie DATE OF BIRTH). how to use sort command for its ascending order and descending order.
Is the same can be use for the date format YYYYMMDD ?
View 3 Replies
View Related
Mar 23, 2011
Interesting problem: For the first time with Xubuntu 10.10 64bit, I am finding certain applications print corrupt. A varying amount of letters / numbers either get substituted/print a blank space/ print a box etc etc. This corruption seems to happen from a Pdf ( evince ) or Spreadheet ( Gnumeric ) Opening the same Pdf on another machine (ubuntu 10.10 32bit) prints perfectly. Opening the same .xls file on the original computer but using OOo Calc prints perfectly.
I guess I have ruled out any problems with the printer itself or the network JetDirect box. I have re-installed CUPS and evince and upgraded to the latest version of HPLIP but the problem appears unchanged.
View 2 Replies
View Related
Jun 5, 2011
I cannot print pdf files. I have tried using okular and xpdf. The documents display in the program, but print preview shows a blank page. The printer then sends out blank pages. I have tried printing on 2 different printers using usb cables. Using terminal to process the commands shows error:
Quote:
xxx@xxx:~$ xpdf
***** MediaBox = ll:0,0 ur:611.976,791.968
***** CropBox = ll:0,0 ur:611.976,791.968
***** Rotate = 0
Segmentation fault
Converting to .ps also is blank.
View 6 Replies
View Related
Dec 26, 2010
My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies
View Related
Aug 14, 2010
Just installed drivers for Lexmark pro200 - S500 series. However although it is recognised by the system and has a tick by its name, And tells me it is connected via usb file goes to print que but will not print. Also tells me it is Printing - localhost! is this correct?.
View 1 Replies
View Related
Dec 6, 2008
I initially had a problem accessing the CUPS interface (see my other post) and got that resolved by adding the user "cupsys". Now, everything "looks" ok, and when I print a test page, it shows it as completed (in CUPS). However, the page never prints.
The printer is a Canon MP600 (using the canonmp600en.ppd file to configure it). Here's the output of my conf file.
Code:
# Show troubleshooting information in error_log.
LogLevel debug
[code]...
View 8 Replies
View Related
Feb 16, 2011
I'm running Kubuntu 10.10 with a Laserjet 5M printer. When I attempt to print a job from Firefox or from Okular, the job never gets onto the print queue. However, I can print test pages on the printer and also print from OpenOffice, so this seems to be app-dependent. I know the jobs aren't being queued because the job number doesn't increase (as shown by the jobs for the test pages). Both Firefox and Ocular give every indication that the print job has been processed correctly.
View 1 Replies
View Related
Feb 26, 2011
Not sure when CUPS started acting up. I have the latest 13.1 current software installed.The first page to print is always OK, but all succeeding pages are overwritten. The second page shows the first page on top of it, and the third shows the preceding pages on top of it - and so on. Has anyone else seen this problem?I guess the printer buffer is not getting flushed correctly. If my configurations were trashed in some way, I don't know where to look for a fix.
View 14 Replies
View Related
Mar 23, 2010
How can I combine multiple single page prints into a single print job? For example, using Firefox on Linux one can print a web page such that each sheet of paper has four pages printed upon it. I would like to combine several separate web pages so that for example, web-page-a, web-page-b and web-page-c (each less than one print page long) are printed on a single sheet of paper.
I would like to do this without having to use some form of image editor to combine and manage manually created temporary files.
View 1 Replies
View Related
Jul 15, 2011
Our one remaining problem seems to be printing. She has an HP OfficeJet 6500 USB printer. We have the computer conntected. Strangely, when I boot from the CD the printer shows up as installed even though I did nothing to install it. After having submitted a print job it shows the printer status as "idle" and the print queue is empty. I tried deleting that printer and re-installing. The installation went as one would expect. However the results are the same. I'm beginning to think that somehow the problem is related to the fact that we are operating from the live CD. getting this thing to print from the live CD.
View 9 Replies
View Related
May 5, 2009
I have a debian system installed on my pc . I have just saved a text file on my desktop . Please let me know how can i print the file through comand prompt ? I need to learn the printing the file thru comamnd line .
View 1 Replies
View Related
Feb 1, 2010
I am running 9.10. I have a HP Photosmart 7350 printer. I have it installed and printing. But the issue I am dealing with is that it will print a full page and then print a blank page..then a full page..then a blank page. Actually they aren't completely blank..it shows half of "2 of 6" or whatever page it is on. Like it cuts that in half and prints the 2nd half of "2 of 6" onto a separate new page.
View 2 Replies
View Related
Feb 28, 2010
Here we go, error 4,384,239,283 in Ubuntu I was trying to load a PDF and print it and only said "print to file" So I go to System >Administration>Printing, and it says "Starting Printing." at the bottom, and then goes away... Sigh, anyone knows whats going on?
View 5 Replies
View Related
Feb 13, 2010
What is a Reverse Proxy? And what is the use of implementing a Reverse Proxy???
View 1 Replies
View Related
Aug 12, 2010
What is a Reverse Proxy? And what is the use of implementing a Reverse Proxy?
View 2 Replies
View Related
Feb 2, 2011
I want to be able to SSH into my computer that I can't expose port 22 on. I've tried the ssh -R ... several times, but can't manage to make it work.I have my home computer (want to SSH into), server (can SSH into), and some computer I want to SSH from.Do I need to install the sshd on the machine I want to SSH into? What are the commands I need to enter to forward from my server to my home computer?
View 1 Replies
View Related
Jan 31, 2010
so i start it with ssh -f -R 4096:localhost:22 me@server.com and it comes up and someone can log in at the remote end. how do i close the tunnel from the initiating end ? netstat doesnt seem to identify my end of the tunnel , unless im looking for the wrong thing!
View 1 Replies
View Related
May 4, 2010
getting a reverse proxy to work. I have it working fine on my windows box with at32 Reverse Proxy. It was very easy to setup. Anyway I'm wanting to replace that windows box with a Linux box.Here is some background on what I'm trying to get done in Linux.
I have
[url].....
All pointing with a CNAME to my dyndns.org address. I have a dynamic IP from my ISP so I need this and its currently working just fine.my ISP blocks port 80 so I have to use port 443. Port 443 seems to be the most reliable port to use since its one of the ports my ISP does not block and its one of the ports other places like hotels dont block.So I want to access my bittorrent server. I type in http:[url]....443 and the at32 Reverse Proxy points it to my internal server http://bittorrent on port 80.
I got this to work perfect in windows.So right now I'm doing this all in a virtual machine for testing. I have Apache all setup and working with the reverse proxy except for my thermostat's web server.Here is how I have it setup in the virtual machine.The machine is called testbox and its running Ubuntu Alt 10.04 32bit .In that VM I can go to http: // testbox but it will only display the HTML code of the page.If I go directly to the main page on the thermostat http://testbox/index.shtml the web page renders just fine and all the links work.My sites-available config file has this inside.
<VirtualHost testbox:80>
ProxyPass / http://192.168.0.205/
ProxyPassReverse / http://192.168.0.205/
</VirtualHost>
The config file is for port 80 but I think once I get things working in the testbox I should not have any problems switching it to port 443.
View 2 Replies
View Related
May 11, 2010
A first server with apache2 installed and configured as reverse proxy, that works great, with this version:
That works mostly, but fail with an oma (outlook mobile access) redirection
It works for all reverse sites hosted, but when we try to connect to oma using a nokia phone, it fails.
I can see in access.log that it hangs on FolderSync istance.
I've used wireshark to sniff packets, and in oma server I can see only three way handshaking coming...
My doubt is: when I'll upgrade working server, also it will not work anymore...
Configurations are the same (I've copied /etc/apache2 folder from running one to new one).
View 1 Replies
View Related
Nov 28, 2010
I made the big mistake of installing the preview version of the new Unity desktop that will be part of 11.04.I now have a computer that runs like a dog and it is near impossible to do anything. I have tried to find anything on how to reverse back to the standard Gnome desktop, but all I can find is instructions on how to install it.
View 3 Replies
View Related
Mar 4, 2011
How the reverse [apt-get install] for remove a program.
View 1 Replies
View Related
Oct 3, 2010
I am currently running 64-bit Windows 7 from my home laptop and I would like to establish an SSH reverse tunnel to my laptop from my work Ubuntu 64-bit machine. I have been reading many "tutorials" that have led me nowhere and I feel as though I'm chasing my tail now. I have done the following on my Ubuntu machine:
Code:
ssh -R 19999:localhost:22 laptop_ip
and on my Windows machine, using putty, did the following:
Code:
Host Name: host_IP
[Code]...
I am able to access my Ubuntu machine when on my work network but there I have been unsuccessful when it comes to trying to remotely access it. I have tried everything that I can think of (though I am a novice). If there is any help/suggestions/ideas that could help, please let me know and don't hesitate to ask for more info!
p.s. I would also like to enable x-forwarding, but for now I would like to have remote access to the Ubuntu machine.
View 6 Replies
View Related
Mar 12, 2010
I have a project that I'm working on now that is using Ubuntu 8.04LTS to create a reverse SSH proxy for a telnet process. We have the box logging in with RSA keys so that it can automatically connect to the SSH host on our end. We are using autossh to keep the connection up and running.
We have rolled out 3 of these and they are working very well. We ghosted the original, changed the hostname, changed the IP info, and regenerated the SSH keys. Now I need to clone 35 more. I want to try to do this as efficiently as possible and can script the changes in the hostname, IP, ect.
Can I batch create RSA keypairs on my workstation and then copy them over as a part of the batch? My current other option is to login to each of them and generate the pair. I would like to just install the drive and ship it and not even have to boot it up.
View 3 Replies
View Related
Apr 9, 2010
I'm trying to reverse a clip in kdenlive and add text on top of the moving clip, but cannot figure out how to do it..anyone know how or a program that can?
View 2 Replies
View Related
