Hardware :: Eaton Powerware 9130 - UPS Connection During Lansafe Installation As A Controller And RHEL 5.5
May 26, 2010
We have:
1. Intel server board S5500BC
2. Eaton Powerware 9130 connected to server via USB
3. Red Hat Enterprise Linux 5.5 as OS We need to control UPS and server shutdown using Lansafe 6.03.
I was asked a question about UPS connection during Lansafe installation as a controller. My answer was USB. It tried to find UPS automatically, but then showed me the list of available UPSes. I chose my model, changed some characteristics and got among others "connection type: network". Very strange, but can't be changed. At the end i got message "successful installation". But it doesn't work Nor windows installation client can't connect to controller, nor server shutdowns after 5 minutes of energy lost. I tried to find any information about this behavior all yesterday. I even wrote an e-mail to powerware. But didn't find solution
The problem mostly is in text (followed my message) "driver=(none)". It's very strange because usb keyboard and usb mouse are both driver=usbhid. What to do? So, what can be seen in RHEL 5.5:
[Code]...
View 1 Replies
ADVERTISEMENT
Sep 13, 2010
I have a couple of servers which runs CentOS 5.5 and CentOS 5.4. We have decided to buy a UPS and we choose Eaton EX RT 11 plus eaton network management card minislot. I have read on the site of Eaton that they have two applications which could gracefully shutdown my servers - LanSafe and NetWatch. My experience with UPS and those applications is zero so I`m here for some advises? Do you prefer NetWatch over LanSafe?
View 2 Replies
View Related
May 10, 2009
I want to Install RHEL 4.7 64 bit on one my server (Supermicro Super Server) having RAID controller1. Intel2. AdaptecWe are using Adaptec.We are using RAID 1 with 2x320GB Hard disksPOINT: If we Install RHEL 5.3 it recognize RAID controller and show single Logical volume of 298 GB, Means working fine but when we try to install RHEL 4.7 it shows two hard disks of 298GB and 298GB,meanz its unable to recognize RAID controller.So, the issue is Driver of it, CD which we got from super micro having driver for RHEL 4 to RHEL 4 update 6We are making our DR site and its necessary for us to Install RHEL4.7 to make it identical.I searched a lot and spent more than three days on it continuously, And still unable to find the solution.
View 9 Replies
View Related
Feb 4, 2010
How to resolve a standalone RHEL machine under Windows Domain Controller?
View 4 Replies
View Related
Jun 18, 2010
I can not get the node or cloud controllers to startup using the init.d scripts. I have a fresh install of CentOS 5.4 with Eucalyptus 1.6.2 I have compiled Eucalyptus and all packages using the RPM supplied from Eucalyptus and utilizing yum installer. I do not currently have any processes or applications listening currently on the ports on the boxes as well. I think it may be a permissions issue or something because I get a "permission denied error", but I am not sure if it is Eucalyptus or CentOS. It looks as if it is not binding to the address on the interface of the NIC. It may be something else however. I have the Node controller, Cloud controller, and Cluster controller on seperate physical boxes. When I try to run either the cloud controller or the node controller I get this message:
Cloud Controller:
[root@cluster-cont ~]# /etc/init.d/eucalyptus-cc start
Starting Eucalyptus cluster controller: (13)Permission denied: make_sock: could not bind to address [::]:8774
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:8774
[code]...
View 2 Replies
View Related
Sep 15, 2010
Basically i want it so that the analogue stick on my PS2 controller, which connects via a USB adaptor and is recognized, correctly controls in game characters. It seems to work fine enough in platformers, at least it does with Banjo Kazooie, but with games like perfect Dark it seem to be trying to move forward and look down at the same time, also backward and look up simultaneously and look sideways and move sideways simultaneously , rendering the game all but unplayable.
I have tried running jscal and, apart from the fact that it seems a bit beyond me, it reports "jscal: missing devicename" when i try to run "jscal -c". Do others out there have there analogue sticks working correctly with games like Perfect Dark, or the James Bond games, for example?
View 4 Replies
View Related
Feb 15, 2010
Can anybody suggest me how to configure my RHEL-5 for USB internet connection(if u r in India, I want to configure AirTel USB internet connection) ??
View 1 Replies
View Related
Mar 5, 2010
My ifconfig of RHEL 5 is
Code:
My windows ip config is ( DNS IS 172.31.1.30)
Code:
Ethernet adapter Local Area Connection:
I want to access internet on windows system through this RHEL system .
View 10 Replies
View Related
Feb 11, 2011
how to install yum in RHEL 5 I want to install yum with internet connection I tried to install by FTP but I'm getting problem of RHN...
View 1 Replies
View Related
Feb 8, 2010
i have a Linux Box running RHEL and has no internet connection, hence i need to setup a local repository which i can be able to install packages together with their dependencies.
View 2 Replies
View Related
Sep 22, 2010
plz can any one help me in configuring linux server 5.0 to share the internet connection to thinclient and the steps reqiure at client side and server
View 2 Replies
View Related
Apr 12, 2010
I have RHEL 5 installed on VMware 6.0 and the host OS is Windows 7. My Host is connected to internet using a wireless connection and works on shared IP. Earlier when I had Windows vista as host I have managed to get the internet connection on the RHEL but do not remember how I managed it. Now I need help in setting the internet connection on RHEL. I have set up a NAT connection. But of no use.
View 4 Replies
View Related
Apr 28, 2009
At the school i work in i have a server2k3 server that provides a domain to all the windows clients, aswell as a fedora server that acts as an imaging machine and webserver.
Im rather concious of the fact that if for any reason the Server2k3 server was to die there is no backup of active directory, or anything that can take its place whilst a replacement is found.
So is it possible to use a fedora machine with samba as a secondary domain controller? so it can be used as a login server, and has a copy of AD.
View 1 Replies
View Related
Aug 2, 2010
Recently we bought a server machine in purpose of hosting game servers.Debian is the optimal choice for us but we have a huge problem.We have 2 x HDD Fujitsu MBA3300RC, 300GB, 15000rpm, 16MB [MBA3300RC] , but NO SAS-controller , so standard Debian DVD1 didn't recognized our HDD's during installation.Is there any way to install Debian on our machine without haveing to buy a SAS-controller? answer in "step-by-step" method, i am not very experimentated in linux.
View 2 Replies
View Related
Jan 29, 2009
I am trying to install FC 10 on my built-in Adaptec raid controller and the Live CD does not see the controller.From my other ATA drive FC10 install I get this from lspci -v:
Code:
00:1f.2 RAID bus controller: Intel Corporation 6300ESB SATA RAID Controller (rev 02) (prog-if 8f)
Subsystem: Super Micro Computer Inc Device 5180
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 18
I/O ports at e200 [size=8]
[code]...
sdb and sdc are the SATA raid disks... they have already been partitioned as a single raid 0 device... not sure why / how they stil show up as two disks.
View 1 Replies
View Related
Dec 31, 2009
my setup
P4 3.4GHZ
2GB Ram
Gigabit Ethernet
Drive Configuration
1 x 750GB Sata
Connected To My Raid Controller in ide mode
1 x 120GB IDE HDD
1 x 250GB IDE HDD
my problem, I Am trying to install f12 and the only drive that it sees is the 750GB Sata,it is not seeing the other 2 ide drives The raid controller is an ite 8212 in ide mode The Bios Sees the drives just F12 doesnt
View 1 Replies
View Related
Oct 22, 2010
I have a Dell PE 600 box with 2 Adaptec 2110s U160 Single Channel RAID controller supported 6 HDDs.I am trying to install Ubuntu from a mini ISO - tried server / desktop / alternate as well. And also different Ubuntu versions.The mini installer runs upto setting the time zone (after configuring for DHCP et.al.) and then on the screen 'Detecting Disks and Other Hardware' hangs up.Now I am assuming its because of the fact that I have 2 of the above controllers - as I have another similar box with only 1 of the controllers and it installs/boots fine with no problems.Look forward to you suggestions/help and if there is any other info I can provide. I plan to set up Ubuntu 10.10 server on it. Btw I don't think its a Linux problem as SUSE 11.3 installs fine on the box.
View 1 Replies
View Related
Sep 1, 2010
I need to add the LSI drivers for the 9750 RAID controller during the install. These drivers are not included in 10.04 (or 10.04.1) and I need to install onto the RAID device I've created. LSI provides the drivers and instructions here - [URL]
Here are my steps, with the drivers on a USB drive -
Code:
Boot from the installation CD and select Install Ubuntu Server.
Press CTRL+ALT+F2 to switch to console 2 while Ubuntu detects the network.
# mkdir /mnt2 /3ware
# mount /dev/sda1 /mnt2
NOTE: LSI drivers are at /dev/sda1, via USB
# cp /mnt2/9750-server.tgz /3ware
# cd /3ware ; tar zxvf 9750-server.tgz
# umount /mnt2
* Remove the USB flash before insmod command *
# insmod /3ware/2.6.32-21-generic/3w-sas.ko
Press CTRL+ALT+F1 to return to the installer. Continue the installation as usual. Do not reboot when the installation is complete. Press CTRL+ALT+F2 to switch to console 2 again.
# cp /3ware/2.6.32-21-server/3w-sas.ko /target/lib/modules/2.6.32-21-server/kernel/drivers/scsi
# chroot /target
# /sbin/depmod -a 2.6.32-21-server
# update-initramfs -u -v
# exit
Press CTRL+ALT+F1 to return to the installer. Reboot to complete the installation. There are no errors, but after I reboot I just get "GRUB" in the upper left corner, nothing else.
View 2 Replies
View Related
Nov 11, 2010
I installed Ubuntu as well but was still using the windows loader. I eventually installed Ubuntu Studio when I got another HDD (which is where I installed it). Don't ask me how I did it. As of now no loader automatically pops up. It acts as if there is nothing to boot from. However I can hit f12 and chose which HDD to boot to. On one it comes up with the Windows loader w/ Vista and Ubuntu. I can chose Vista and it works just fine. However if I chose Ubuntu it starts going a lil nuts and restarts. If I chose the other HDD it boots up Grub w/ options of Ubuntu and Ubuntu Studio. Studio works (which I'm currently on) and pretty much the same thing happens as before when I chose Ubuntu. So if the 2 OS's that I need work (Only really use windows for games) then what is the problem? I know its a little bit annoying trying to remember to hit f12 and having to chose your OS again after that (and of course the extremely annoying vista startup times). Some other things in both Studio and Vista don't want to work like they should. This is about the only thing left that I could think of that may have something to do with it. My wireless card+an old wireless card I found won't work w/ either.
Yet they both work on other computers running Vista and/or Ubuntu (not studio). I seem to always keep having display problems on both as well (dual monitors and graphics both). Even on studio I have to restart it sometimes to even get it to let me go fix it. My wireless controller receiver (for games) will stop working randomly and need to be unplugged and plugged back in. I also have problems with Studio recognizing SD cards and DVD/CD's. I am not sure much of anything can be done aside from wipe and fresh install on both. Bad thing is I don't have my other computer with me and can't afford to buy a 1TB HDD right now.
View 1 Replies
View Related
Jul 31, 2013
I just bought a new server with one of the most recent v3 Intel processors (socket LGA1150). The board (Supermicro X10SLM-F) uses the new Intel NICs (i217LM + i210AT), not supported by the current Debian stable release. Hence, the ethernet adapter is not recognized during the installation process.
I would like to be able to install something as close to stable as possible in a production server such as this one.
View 12 Replies
View Related
Jul 19, 2011
I have DL120 Proliant server that has a P212 raid card, if I install Lenny it works fine however I need squeeze. If I upgrade or install a new version of squeeze the raid controller is no longer visible. I have done some snoopping and it seems as though the ciss drivers have been replaced by the hpsa drivers but I still cant seem to get the raid card recognised any body got any tips ?
View 1 Replies
View Related
Jun 18, 2010
I want to create a file-server with Ubuntu and have two additional hard drives in a RAID 1 setup. Current Hardware: I purchased a RAID controller from [URL]... (Rosewill RC-201). I took an old machine with a 750GB hard drive (installed Ubuntu on this drive). I installed the Rosewill RAID card via PCI port. Connected two 1TB hard drives to the Rosewill raid card. Went into the RAID bios and configured it to RAID 1.
My Problem: When I boot into Ubuntu and go to the hard drive utility (I think that's what its called). I see the RAID controller present with two hard drives configured separately. I format and tried varies partition combination and at the end of the day I see two separate hard drives. Just for giggles, I also tried RAID 0 to see if they would combine the drives.
View 3 Replies
View Related
May 31, 2011
I upgraded F14 to F15; However, F15 no longer recognizes my 3 sata disks connected through Marvell controller. The controller is an integrated Marvell chipset 88SE6480. The controller has its own manufacturer driver but it was intended for RHEL 5.4 (mv64xx) and installation of this driver fails to generate mv64xx driver.
View 3 Replies
View Related
Mar 2, 2011
is possible to edited the default RHEL CD to have it automatically install RHEL based off of a kickstart file that I will store locally on the CD. My plan would be to put a cd in a server and have the OS automatically being installed.
View 3 Replies
View Related
Feb 1, 2011
We are planning to migrate our LINUX server from RHEL 3to RHEL 5. What are the configuration difference between RHEL 3 to RHEL 5 for webserver installations?
View 1 Replies
View Related
Apr 27, 2009
I have 4 partitions in my system, out of which two(sda1, sda2) have windows on them. I have installed RHEL 4 32 - bit on sda3 and after that , installed installed RHEL 64-bit on to a partition sda 5. Now i am unable to boot into RHEL 32-bit. The error i am getting is Error 13: Invalid or unsupported executable format.
View 1 Replies
View Related
May 1, 2011
can not ping from host (RHEL 6) to RHEL 5 in (virtual)? I have stopped iptables on both machines. But still not able to ping from host machine to virtual.
View 1 Replies
View Related
Jul 13, 2009
I have RHEL 3 and Win XP Installed in my P.C?I want to uninstall RHEL 3 and install RHEL 9 without affecting XP.how can i do this and also where can i download free RHEL 9 version or any other latest linux distribution for free?
View 1 Replies
View Related
Feb 16, 2010
A client has sent me an RHEL 5.1 box for me to do some work on, but it's not registered with Red Hat. This is causing me problems, because it's a minimal installation, and I need some more dev software.My immediate reaction was to install various bits (emacs, and so on) from my Centos 5(.0) DVD.The base RHEL system only had one (disabled) repo entry,so I added a yum DVD repo entry in yum.conf.d.
This looked good to start with, but it doesn't work. Something in RHEL's pirut/yum/rpm/whatever is getting confused, and can't work out what is/isn't installed.
Question - how do you maintain an unregistered RHEL box? Has RH done something to make life difficult? Is my problem simply that I'm using a Centos 5.0 DVD, instead of Centos 5.1? Am I stuck with downloading lots of rpms from the net and doing everything manually? I really don't want to do that.
View 2 Replies
View Related
Dec 23, 2009
I am trying to download RHEL 5.4 AS version for testing..But under [URL] There is no specific link for AS version or ES version..How can I detect which iso is for AS and which one for ES..? There are separate links for AS and ES version for RHEL 4.x version but why is it not available for RHEL 5.x versions?
View 3 Replies
View Related
