What is the current state of ATI graphics card support under linux? Up until a few years ago, nvidia had much better (albeit proprietary) drivers than ATI. Has this situation changed, now that AMD has owned ATI for a while now? Are open source drivers any better?
View 6 RepliesMy situation is like so: I have two NVIDIA GTX 460 graphics cards running the latest (260.19.06) proprietary drivers. I SLI these together under Windows 7 for gaming. However, for day to day usage I have Ubuntu 10.1 running on my two monitors using twinview.
My problem is that the xserver refuses to load (I get the "screens found, but none have a usable configuration" error) when both my graphics cards are plugged in and powered; if I remove the power to one, the system works fine. If I was just using Ubuntu, I would simply leave one unplugged but, because I'm not, its a pain to have to plug/unplug one every time I want to switch operating system.
I have tried every modification to the xorg.conf file that I can think of and a few more found in the documentation and via google, all to no avail. I have also tried everything again with twinview disabled and only one monitor plugged in.
I am aware that SLI isn't compatible with twinview, I don't really need to use it, although it would, of course, be nice.
Is it possible to run a box with 2 graphics cards in it with one card being a PCIe x16 and the other being a PCIe x1?
Unsure whether this would cause all sorts of problems with ubuntu and/or the nvidia drivers (2 quatro NVS 290's).
I know ATI cards have not worked well with Linux in the past, however this may have changed since AMD bought out ATI and their being improvements in the OpenGL platform. (version 3.1/3.2) So... I am wondering. Is AMD planning to add more features to their cards by offering customer good solid drivers for use on the Linux platform(s)? I know that has always been one of their pros making good CPU chips that work well with Linux. But my main question is, do the 5xxx series cards work (well) in Linux? Has anyone every tried Linux with one of these card or are their any drivers out there?
View 4 Replies View RelatedIs there a list of supported hardware anywhere?Ubuntu directed me to Gentoo-Wiki, but there was no page with the name...Anyway, I have Intel extreme graphics, whih I know isn't the best, based on the new ones out there,Does anyone know if it's supported for desktop effects?Or will I Have to buy a new one..I'm Okay if it's a bit slow, but I just want to know if it will run..
View 1 Replies View RelatedI'm using Ubuntu 9.04 with 2 graphics cards (ATI X1300 both).After installation 1 monitor on one card worked fine.I also managed to start Ubuntu with dual monitor support (on one graphics card).Now I want to activate my 2nd graphics card in order to use my 3rd monitor too.
View 2 Replies View RelatedI have an ACER Veriton 7600GT, with an internal Intel 82865G, which drives the main monitor and a Radeon 9250 which drives a second monitor (on its first port) - it all works fine under XP.I've had no luck at all trying to get any version of linux to cope with this. I've been trying live cds..PCLinuxOS and Mandriva will not boot except in 'safe mode' and then run with the wrong resolution for the main monitor and ignore the second one.
Ubuntu boots OK for primary but ignores the second monitor (I'm not keen on ubuntu anyway because of instability on other machines).OpenSUSE boots OK for primary and seemed to offer some hope of setting up the second monitor. However, after this discussion it seems to have come down to trying the latest development milestone.There is quite a lot of diagnostics in the above discussion and I'm wondering if anyone here has any experience of this sort of thing? The problem seems very fundamental in the sense that (even with all the tests) I've never seen the second monitor even receive a signal and wake up under any version of linux.
i just upgraded my pc to 12.1 milestone 5 when i went to play my fav game (Xonotic) it was all laggy at 1 fps. I realised the graphics card app wasnt working anymore.Can any 1 fix PS and i had to go on failsafe too. PS2 milestone 5 workes flawlessly apart from the gnome 3 bug at startup
View 2 Replies View RelatedHi i am looking at buying a ASUS K52JR-SX052X i3-350M 2.26GHz, 4GB, 320GB, 15.6" WXGA LED, HD5470M 1GB, 11N, BT. or a ASUS G51JX-HD-SX232V i7-720QM, 1.6GHz, 6GB, 500GB, 15.6" WXGA LED, GTS360M 1GB, BT.
I know there can be issues with graphics cards and would like to know if anyone has a site that i could look at to see if these cards work with Ubuntu 10.04.
I'm building another desktop. This is not a gaming system (though some video does cross my path), it's primary focus is as an application development platform. The thing is based on a SuperMicro two CPU motherboard with a couple intel multi-cores, 16GB RAM, a hardware RAID, and CentOS 5.6 (64bit). To this mix I would like to add a solid dual-head graphics card. Something that will support a couple HP LP2465 monitors (not new but functioning well). Speed of rendering is not my biggest concern, stability and "real estate" (the monitors are 1920x1200 and I want all of it).
I've looked a little at the Matrox items and started researching nVidia, but would like to hear opinions from those "in the know".The motherboard, though a solid performer, may have just made this trip unnecessary. It has a quirk that I hadn't considered before. It has several PCI-X slots (64-bit @ 133MHz) but only one "PCI-Express 1 (x8) on a (x16) slot". Does that seem a little strange to anyone else? Not that there is just one PCI-E but that it will fit a x16 board but will only support x8 connections...
After a PSU and motherboard failure, I'm about to spec out a new PC. The last time I looked, Nvidia was the preferred graphics chipset as they tended to support Linux better than ATI. Is this still the case?[url].... seem to have lots of ATI cards in stock but hardly any Nvidia (despite offering a similar sized range), but I don't want to get an ATI card if it's not preferred for technological reasons (or even FOSS ethical reasons!).
View 9 Replies View RelatedFrom what I've read there is no problem running one nvidia card on a crossfire motherboard, but not much information running two cards.Some context: I currently have a Core 2 Duo on a motherboard with an nForce chipset supporting SLI. I have 2 nVidia 9400 graphics cards not in SLI mode driving my 3 monitors.I'm toying with the idea of upgrading the CPU and motherboard (maybe the RAM if I go for DDR3), and am leaning (back) towards the AMD camp, however most of the motherboards for AMD CPUs that have 2 PCIe x16 slots also have Crossfire.
View 4 Replies View RelatedI have a Thinkpad T400 running FC11 and am using integrated (intel) graphics, because I know FC11 doesn't have 3-D acceleration support for the ATI Radeon Mobility 3470. I take this to be because the 2.6.29 kernel and the X Server release were too new, and unsupported. I know from phoronix that 2.6.29 is now in fact supported with the advent of 9.8, and that I believe my X server is supported too.
As far as I can tell, this means I **should** be able to use fglrx..I was wondering how one backed up their X configuration on Fedora, as it doesn't really use xorg.conf very much. I was also wondering how to reconfigure X for a completely new graphics card with a completely new driver, without reinstalling. That is, quite simply, out of the question for me, as I've made many customizations to Fedora, and I don't have the time to back them up and restore them.
I have just bought 2 monitors to be used as a x3 multi setup and 2 graphics cards the same make and model (ATI Sapphire Radeon HD5450). This all works in Windows 7 but I have just booted into Ubuntu and removed the old nVidia drivers and got the supported driver. The problem is only 2 monitors are detected as it would seem that it's only picking up 1 card.
View 1 Replies View RelatedSo I installed openSUSE 11.1, and got everything from yast2 and then finally got nvidia.ymp or whatever. Bascially, the one click install. When i did that, I couldn't boot into the SUSE GUI. I could boot into the command line but I couldn't start X server.When I did try the Ec2-openSUSE-2.62.27.9 option, I get grub error 13. It says that the ex2fs file system is not supported, only I did not format it with ext2. I am completely stumped and I'm a newbie.
View 3 Replies View RelatedI want to add a second monitor to a computer with existing onboard Intel 965 graphics. The Intel graphics work great so i'd prefer adding something old for a second monitor (just to throw some toolbars on it) instead of installing ATI / nV card (which will disable the Intel graphics). I added an old PCI (not PCIe) Cirrus Logic GD 5440 Alpine for the second monitor (so that it won't disable the Intel). This card is capable of 640x480 w/ 256 colors (actually more, but I don't know how much more it will go. It has like 1MiB memory)
Now I set it up like this:
/etc/X11/xorg.conf.d/20-cirrus.conf
Code:
Section "Device"
Identifier "CirrusCard"
Driver "cirrus"
BusID "PCI:4:0:0"
EndSection
/etc/X11/xorg.conf.d/20-intel.conf .....
All the additions to the cirus (modeline etc) were added when experimenting, but did not change the errors. X fails to start in all configurations I tried here:
Xorg.0.log
Code:
[987.177]
X.Org X Server 1.10.2
Release Date: 2011-05-28
[987.179] X Protocol Version 11, Revision 0 .....
I think the problems are connected to the ATI drivers I've installed. I used the ones I got off of the ATI graphics driver repository specifically for OpenSuse. I would like to try the latest drivers off ATI's website again. I understand they are much more recent than the ones in the repository. The first time I tried them they didn't work, though they have worked in the past for me on a previous incarnation of this system. Do I have to uninstall the current drivers first? If so, how do I be certain I have uninstalled all that is necessary since I didn't keep track of the details in the first place? I can find some of them using the search function but perhaps not all. I would imagine there is a way to do that using YaST since I got everything off that one repository.
which option in the ATI graphics driver installer (ati-driver-installer-10-4-x86.x86_6.run) should I use? I'm using 11.2-64 on an Intel based system. Will the 32 bit drivers work on a 64 system? As I noted, the automatic option doesn't work for me. From reading some of the other posts here it seems perhaps I should start in level 3 and use the cli from there. That's not what I did before. Or should I try the latest 11.3 milestone since that seems to have better graphics card support?
is there some wiki page on GNOME or Fedora that list which graphics cards work without problems on Fedora 15 with GNOME Shell? I have tried 3 older cards and they all failed, so I would like to share this info with others so people know which cards to avoid if they want to use full features of GNOME 3 via GNOME Shell.
View 1 Replies View RelatedI had initially created 10 GB ext3 partiton for my kubuntu 9.10 , but now space is almost full , I tried Gpartedbut it wont let me unmount my ext3 partition ?The error is posted below.I got windows 7 on another partition but its partition manager does not support ext3 so its useless ??shd i boot from live CD and then extend my partition or is there an easy way out , like using "parted" command line tool Could not unmount /dev/sda2The partition could not be unmounted from the following mount points:/Most likely other partitions are also mounted on these mount points. You are advised to unmount them manually.
View 5 Replies View RelatedI would like to know how I stop the current window I am on following me when I switch workspace.for example, I have this web browser open whilst I am typing this, I press Ctrl+. (my shortcut to take me to the workspace to the right), and instead of taking me to what was a nice empty workspace on the right, it sweeps this web browser to it as well.I can't find a way to configure this to my liking, can anyone help?
View 4 Replies View RelatedI am trying to use an ATI Radeon x300 graphics card with my current system setup with fedora 12 but i am having an openGL issue. I am trying to create a 3D model using comsol and i get an error like:
Failed to initialize 3D graphics. OpenGL not fully supported.
This is a hardware/software issue with the graphics card... not the program COMSOL. How could i enable openGL support to correct this issue?
I have a dns server started with 2 NIC Cards in it. The bios sees both cards but they both dont show in ifconfig. is there a way to activate the second card?
View 1 Replies View RelatedI've upgraded Slackware-13.1 I had installed to Slackware-Current using a local tree I had download with mirror-slackware-current.sh script, but when I rebooted I could not get the graphics to load. I think it's because I've also modified /etc/groups and add an username after audio: and video: group, but I forgot that and had to remove slackware from the machine.
View 4 Replies View RelatedLogical Memory Space of 4GB is divided in to 3GB User Space and 1GB Kernel Space. Always. Correct?
1. How can we change it? (just changing value of PAGE_OFFSET is okay?)
2. If system have only 256MB of memory (embedded system) and suppose Kernel Modules eat away all the memory during boot. User space will be left will no memory. Is this case possible?
I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first:
Integrated graphics
PCI graphics
PCI-Express graphics (PEG)
I set the BIOS on PEG, but
I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.)I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one.Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says
Current usage: Unknown
There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset!
Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power.It gets all its power from the PCI-E slot; there is no external power connector.The BIOS is an AMI Award BIOS.how can I make the PCI Express graphics card visible to Ubuntu?
I have just installed Ubuntu (9.10) and noted that in order to successfully run the trial off the CD I had to test in "safe graphics" mode. I have an NVIDIA GEforce 6600 GT card - which was discovered by Ubuntu in the first few minutes of the trial and so I activated the recommended driver and continued to test. After a successful trial I installed Ubuntu (dual partition Ubuntu / Windows XP), however, it seems the install didn't activate the required driver (as part of the process) and so I'm unable to get into my newly-installed Ubuntu at all. All I get is a flashing tty screen asking for my username and password - however it's erratic and won't recognise what I type. So - I'm stuck in a catch-22 as there doesn't seems to be a safe graphics mode option via the start (GRUB?) menu list.
View 4 Replies View RelatedI have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
I have a Packard Bell Imedia desktop with on-board ATI graphics. I also have a spare Nvidia PCI card. Is there a way I could use the Nvidia to run a second screen, if so how as the Nvidia and fglrx drivers seem to collide in a show stopping way!!I am running Kubuntu Intrepid, but have resorted to Gnome as KDE4 went spectacularly wrong on me.
View 5 Replies View RelatedI have linux and windowsxp on one machine. I have only 3gigs free on the windowxp machine and 20gigs free on the linux machine. I want to transfer space from the linux box to the windows machine.Is this possible and what steps would I need to follow to do this?
View 1 Replies View Relatedmy home partition is an extended one, and when i want to create an unallocated space the space will stay in that extended partition. but there is also an 7 gb unallocated space which i want to merge with the other unallocated space. I also cannot extend that partition over that 7 gb. how can i overcome that problem?
i m also uploading a screenshot of gparted.[URL]..