Just noticed that when I plug my USB stick Slackware mount the drive to /media/?______?É?/
what the h**! is that name? Where it could potentially come from? How do I change that?
At this moment, the stick is mounted and lsusb says:
Bus 002 Device 009: ID 0951:1607 Kingston Technology DataTraveler 100
I just removed ubuntu and installed kubuntu, just for something different. i had my home and / folders partitioned separately for ease of upgrade, now during the update process i forgot to make sure the home directory would mount the right partition. for fear of loosing data, so my question is, is there any way of changing the mount point of the drive one the OS is installed.
View 9 Replies View RelatedI have a few drives that I would like to mount in my home directory. I know I need to add something like this to my fstab: /dev/hda2 ~/Music ntfs-3g defaults,locale=en_US.utf8 0 0I just don't know how to find the /dev/hda2 part
View 1 Replies View RelatedHow I can auto-mount a iSCSI drive into a folder? Because every time I reboot computer, I need to mount it manually.
View 3 Replies View RelatedThe solution may to my problem may exist elsewhere, but I had trouble searching/finding it.I just bought a new external drive. The drive is formatted as ext4. I use it mainly in esata mode. Whenever I connect it, it mounts to /media/[UUID], where "[UUID]" is the UUID of the drive. I want it to be located at /media/backup when it is inserted, not in relation the UUID. I have tried putting a new line in my fstab (mount by UUID to folder) to mount the drive. It mounts correctly if the drive is connected to the computer and turned on during startup, but if the drive is off/not connected during startup Ubuntu barks at me. (I press 's' to skip mounting the drive) Is there a way to make external/removable drives mount to a certain location other than /media/[UUID] when they are inserted? I want the drive to mount to the folder while the computer is running, not only during startup.
View 3 Replies View RelatedI was wondering how to get a script that i am writing with emacs over to possibly a flash drive or onto the desktop.?
View 4 Replies View RelatedI need a guicance related to mounting USB stick of 2GB capacity. Normally when I insert my USB stick it mount automatically and show me.I want that instead the usb mount automatically I manually mount it. Now there are two steps to do it. First How to stop USB to mount automatically ? Second How to mount it manually ?
View 1 Replies View RelatedI have two computers (one at work, one laptop) that I use daily. Both are running Ubuntu 10.04. I frequently use a usb stick to transfer files from one to the other. Somehow, every time I do this, all files get turned into executables (as if I did a chmod a+x on them...)
This happens every time I use the usb stick. I've reformatted the stick, but still this problem persists... anyone have any ideas on what is going on? It is really getting annoying to have to zip up folders so this doesn't happen...
In the linux machine we need to mount a folder names sever under apps folder with the user as steve. Also the steve user should have the permission to create the files in the folder. As of now, its mounted as root user.steve is in list of sudo users.
View 4 Replies View RelatedI'm installing things in a new Red Hat server and saw that the /var folder is full (100%). I need this folder to have more space or another kind of solution because this server is going to be used as a print server.
View 7 Replies View RelatedHow do I change folder permissions without changing the permissions of the files within the folder?
View 6 Replies View Relatedi am running Ubuntu 9.10. sometimes my USB device is auto detected and shows up on my desktop other time it is not detected?? anyway i am trying to figure how to Mount it. read about the ETC/FSTAB file and i may need an entry there. following is a copy
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
[Code].....
i did try to update with an entry similar to the cdrom. my fstab is read only so no update. i have read other USB mount problems but not sure about any.
how can i manually mount kingston usb stick under red hat ?
View 4 Replies View RelatedWhen I plug in my USB stick (with fat32 filesystem, labeled flash8p1) and then try to mount it from the Places menu, I get an error box that pops up: Unable to mount flash8p1 Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
I don't understand what the dmesg is telling me, but here it is for those who may understand:
$ dmesg|tail
[14076.617192] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[14076.619599] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[14076.619620] sdc: sdc1
[14076.623348] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[Code]....
I just got my Gnome-flavored Squeeze running this morning, and I'm still working out the configuration. I have disabled automounting and autobrowsing of removable media, but anyway this problem was occuring when I had automounting enabled. I have the OS installed to a 4-GB microSDHC card plugged in to the front of the computer. The computer is a Toshiba Mini NB505.
edit: And now, I just plugged the flash8p1 into a different USB port, and it mounted from the places menu. I wonder, though, if this is related to the fact that I had first mounted it from the command line.
I've got a problem with my usb stick, I work on Fedora 13 at the moment the usb is ex3, I tried even ex4 but Fedora doesn't even recognize the usb.
View 1 Replies View Relatedim using xfce. i would like to have it auto mount to /mnt/usbstick.
View 2 Replies View RelatedI have just installed opensuse for the first time. I have plugged in a USB memory stick but it does not register anywhere (eg Dolphin does not pick it up). how I can access the files on my USB stick?
View 8 Replies View RelatedI'm unable to mount external drives in thunar. Pcmanfm works fine. Ive tried a 2gb usb stick and a sd card reader. both give the same error. I used to be able to mount drives with thunar. What happened? I'm using ubuntu 9.10, installed lxde on top of server edition. Thunar is 1.0.1 , from the repos. Here is the output from the usb stick:
Failed to mount "2G Removable Volume". mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so .
My 16gb usb memory stick now fails to mount. The device can be seen in gparted but partition is shown as unknown. Tried to format but error message popped up "failed". The device is shown in dmesg see below. I had tried to use the device to create a bootable usb but this did not work and the problems happen there after.
dmesg:
usb 2-2: new high speed USB device using ehci_hcd and address 3
[41796.814297] usb 2-2: configuration #1 chosen from 1 choice
[41796.943922] Initializing USB Mass Storage driver...
[41796.944228] scsi2 : SCSI emulation for USB Mass Storage devices
[Code]....
My usb stick continually automounts at /dev/sda10, and for a certain operation I'm trying to do I need it to be mounted at /dev/sda (or sdb, sdv, etc); is there any way to change it's mount directory?
As a bonus question, or rather the real question, what I'm really trying to do is format a bootstrap partition as shown here
Code:
Command (? for help): p
/dev/sda10
# type name length base ( size ) system
/dev/sda101 Apple_partition_map Apple 63 @ 1 ( 31.5k) Partition map
[Code].....
I'd like to be able to manually mount a USB stick in console (before X is started) and I can't seem to find a good way to do that. I'm not too smart about HAL and UDEV and I don't want to undo the auto mount feature when X is running but still be able to manually mount and unmount as necessary; like for installing patches and packages after an install or version upgrade. It seems like there should be an entry in /etc/fstab and a directory in /mnt or /media but danged if I can find something that points the way.
View 12 Replies View RelatedI'm not familiar with Linux and I do not understand technical wording at all. I was given this laptop as a favour and it is an ex-work Dell Latitude. I was given this to help me as a replacement when my Compaq working with Windows Vista stopped working. I do not understand the way Linux works much. I managed to upload photos before from my Ericsson K850i to my memory stick but this time when I tried it kept telling me that the path was invalid and such things which I did not understand. I created a folder for 2011 photos ready to go next year but the mouse pad is hard to control and even though I did nothing the 2010 folder went into the 2011. Sorry if I am not being very clear.
All I want to know is where did my whole years worth of digital photos go from my memory stick as I didn't delete anything. Would someone please help me understand all the different extensions or tell me what I need to do to try and retrieve them. I would be so grateful. I was nearly crying when it happened as when you right click in Linux there is no Undo/Redo button.
I have searched the board and I did see some other questions but I don't think they will help in this instance so I have started one. I hope I can get my photos back and also hope to hear from someone soon.
Due to a bug that will be fixed at squeeze (I'm running lennyx64), I can't mount ntfs partitions from gui interface (or else, directories with non-English characters will be ignored).
So I'm mounting with disk-manager (hd partitions only), or from konsole. Obviously, mounting from konsole, is the only option for usb flash sticks.
Suddenly, just out of the blue, today debian stopped mounting ntfs partitions from konsole. Since this was my only option for mounting safely my friend's sticks, I have a big problem right now.
I can't figure out many things from the error message:
[Code].....
Today I was trying to make a LiveUSB for Fedora 15 with UNetbootin and when I inserted my USB stick, it blinked and then this error appeared:
Error mounting: mount exited with exit code 1: helper failed with:
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I tried (unsucessfully) to load the alpha version of Ubuntu 10.04, & now my comp will not even load XWindows at all. I am trying to reload Ubuntu 09.10, (i have it on a flash drive), but cannot even get the thing mounted properly. The error i get is Disk devsdb invalid partition table
View 4 Replies View RelatedCan look at attached screenshot and tel me why I can't cd to.....
View 5 Replies View Relatedim trying to properly change the name of my home folder and conf files to make sure my menus and shortcuts work. what happened when i tried was this error msg appears:
"Service '/home/user/.kde3.5/share/apps/kicker/mozilla-firefox.desktop' is malformatted."
then when i try to do anything the menus dissappear. i since redid what i done and it works
I've compiled my own code as root (long story why) anyway I now need to switch this to a normal user to compile. So I did a simple copy/paste (using gnome/debian lenny) to my home/user. I then logged in as used to see the folders with a padlock and permissions for root only. So I logged back in as root, change permissions to the used, check they were all ok, logged back in as user, and it still says owner root, even thought when I log in as root it shows user as owner.
View 6 Replies View RelatedAlthough I can perfectly mount any usb device (stick or disc) as being root, as a user I am not allowed to perform any such action! I have modified the corresponding fstab entry to look like:
Code: usbfs /proc/bus/usb usbfs noauto,user 0 0 and I have also made sure that the user is a member of the disk group, but without any luck. My system is OpenSuSE 11.2 (with KDE 4.4, but the problem is the same regardless I am attempting to mount the usb device via the GUI or through the text (c/k)onsole).
I have a few generic USB sticks lying around, and a few more SD/microSD chips that I use with openSUSE. Is there any way to label/ID them so they mount at unique points in /media, so I don't blast one accidentally? In mkfs.vfat there is a "-n volume-name" that looks promising, but I can't find a way to set that after the mkfs.
View 2 Replies View Related
