Hardware :: Best External DVB For System?
Jan 8, 2011I am looking for a good external DVB for my linux box which linux completely support it without any problem .
View 1 RepliesI am looking for a good external DVB for my linux box which linux completely support it without any problem .
View 1 RepliesEvince in non-gnome systems is unable to open external link. The error msg it shows is
Code:
Unable to open external link The specified location is not supported. I have already googled it, however it only says it is a bug, without any solution available. Evince in gnome systems however work just fine. Is there any way evince can use sensible-browser to open external links?
I am running fedora 10 on my laptop. I use a usb Western digital "MyBook" 500Gb (ext3). I am using this hard drive since more than 1 year now. Lately I run into a single problem when I read a precise file. The laptop becomes totally unresponsive and I have to manually shutdown the computer. After start-up I can find that the /var/log/message file of my previous session has grown very quickly with "[sdb] Sense Key : No Sense [current]" and "[sdb] Add. Sense: No additional sense information" messages.
I found various similar question on the web, most of the answer were hardware dependent and kernel related. I tried various kernel hoping that my specific problem would be fixed in the next one but with no success (all the kernel since fedora 10 release and two testing one: 2.6.29.5-84.fc10 and 2.6.29.6-93.fc10), I don't have access to a Fedora 11 machine.
I replaced the usb cable and check that the power supply was working correctly.
I am joining part of /var/log/message and the results of lsusb (related to the external hard drive).
I just picked up a 1 TB Western Digital. Right now i just have Ubuntu 10.04 installed but I think I will need to dual boot with winblows soon for school. Which file system will play nice with both OS's? Should I try to put one of the OS's on the external HDD or install them both on the internal (250 GB Seagate)?
View 7 Replies View RelatedI have been using lucky backup to backup my files. However, I am unable to get a list of all packages that are currently installed, turn it into a file, and then back that file up as well with this gui.Lucky-backup's execute function does not work.I would like to have my system backup all appropriate directories upon connection of an external usb drive.I would also like to run a variation of the following command:sudo dpkg --get-selections > /path to external drive/Linux Backup/app-list.log(I need to overwrite the file on every connect- not add to it! What needs to change to this?)1. What commands would I need to use to backup certain directories?2. How can I turn the above mentioned command to OVERWRITE the current file on the drive, and not simply add to it?3. Most importantly, how do I run these commands both immediately upon mounting of the drive, AND/OR "on command" without having to type it all out every time?
View 3 Replies View RelatedMy system doesn't recognize my external HD when I restart. I have to unlug and replug it in every time. Is there a command I could add to startup apps that would do this for me?
View 7 Replies View RelatedGot Samba on fedora 13. Windows machines backup their files to the linux shared folder. I want to attach an external hard disk (USB) to the linux machine in order to backup those files. Can the external hard drive be NTFS or do I need to reformat it as Linux file system (ext3)?
View 9 Replies View RelatedCan I install linux on external HDD (WD myPassport) 300GB? I want to install either Ultimate or lucid lynx Ubuntu, Redhat, openSuse, Slackware or KNOPPIX.
Would it be the 32 bit download if even possible?
Would the external get to hot?
How can I install linux using an external hard drive? ANy help would be greatly appreciated. I dont have any CD's or anything and this is my only option.
SO how can I install linux FROM my external HDD ONTO my internal HDD?
My external disk does not appear as mounted on the desktop (It's e-Sata and NTFS, samsung 1.36 Tera bytes ) There's nothing in /media, nor it appears on the desktop as mounted. What can i do to be able to use it?
[code]...
I have configured a command line (9.10) server to forward all the system email notices to an external Gmail account.
All is forwarding fine except, all the emails from root have a return email address of "root <myaccountname@gmail.com>".
I do not think that it is a big security issue but, I would prefer that the root emails were forwarded to an existing user account on the server and then forwarded to my external Gmail account. That way the return address would not say "root" within the address but rather "existinguser <myaccountname@gmail.com".
Anyone have a thought on this? Is exposing the "root" name within the return email address a serious security issue?
I have a 1.5TB Western Digital Caviar Green in a USB 2.0 external setup with an ext4 file system. I'm going to purchase a 2.0TB Western Digital Caviar Green in a USB 2.0 external case, copy the data over and put my 1.5TB in a fire-resistant box in another house. I'm worried about a couple things however:
(1) I'm worried about the long-term viability of _any_ file system years into the future. I've been storing my data on hard drives (instead of CDs, DVDs or BDs) for years now due to their higher reliability than optical disks. However, the file system used in optical disks is UDF which I think has much longer viability into the future. I'm not going to store terabytes of data on optical discs of course, so I'm wondering what I should choose for a hard drive file system. FAT32 or NTFS (due to Windows' 90%+ presence on the desktop, including still being used by Windows 7) may be the best choice, but I much rather have a open source file system, especially one that allows for permissions, timestamps, etc.
(2) As for my 2TB hard drive that I will be using for a while into the future, should I continue to use ext4 (I've had no problem with it thus far), but is there another file system that has better performance when storing and transferring gigs of data?
Just installed Ubuntu 10.04 LTS netbook edition and everything goes well except for one thing.
When I connect my lcd monitor to the vga port the system lags. If I listen to music and browse web pages at the same time, the sound skip and when the page stop loading, music is ok. Also, the mouse skip. If I do circle with it on the desktop without doing anything else, it will skip.
The strange thing if I remove the external monitor and reboot the system everything comes back to normal.
I had Intrepid Ibex for 2 years without any problems. I remember a post saying that powernowd should be disable, but can't find the process from the startup list anymore.
Ok so I just installed Debian 7.5 on my laptop and encountered several problems.
First off was the problem with GNOME 3, GNOME 3 failed to load.
Second problem was that the system does not recognize an external monitor via hdmi. Via VGA I do not know do not have a cable to try it out.
Third problem was that my wireless was no recognized.
Dell Inspiron 5537 Laptop
wireless: Network controller: Atheros Communications Inc. AR9565 Wireless Network Adapter (rev 01)
Graphics card: VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09) from the 4xxx series
System: 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3+deb7u2 x86_64 GNU/Linux
Before I had Fedora, but only cuz all the devices were recognized by default, for a while now I wanted to switch over to Debian but as I came to relize my hardware for some reason is not working.
I've followed this guide [URL] after rebooting the system hang at:
starting ati external events daemon [OK]
This line start blinking for a while, then nothing happen. I am using a radeon hd 4225. (I'm booting with acpi=off).
How I can backup all my system & files to external hard drive?
I am using OpenSuse 11.3 32bit - Gnome
When I connect my logitech cordless optical mouse to my laptop I am unable to access it's settings under system settings. The setting options are greyed out and it says
You have a Logitech Mouse connected, and libusb was found at compile time, but it was not possible to access this mouse. This is probably caused by a permissions problem
How or where can I set the permissions so that I am able to access the mouse settings? I've googled around and found lots of references to the above message but no solutions.
The mouse is one of those optical wireless (radio) mice
Find external and internal devices attached to a system in Linux
How can i find through terminal that which devices are external and which are internal.
By external i mean devices attached to USB port. For Example, USB Drive, Portable USB HardDrive etc
By internal i mean devices attached internally. For Example, SATA Harddisk etc.
I'm a new user and recently installed ubuntu on an old samsung laptop, during the installation process i couldnt see anything on the screen and came to the conclusion that ubuntu's default resolution was different to that of the laptop screen so i plugged it into my TV and sure enough it worked however i still only have a picture on the tv, ive tried all the resolutions available in the 'monitors' box but nothing, does anyone know how to fix this?
View 1 Replies View RelatedInstructional post - medium difficulty. Installing on an older notebook (or other system) with no external bootable device available:No CD/DVD drive
No floppy
No boot to USB capability
No (usable) OS on HD
Solution went like this:Remove target HD from notebook.*
Disconnect HD from a desktop.**
[Code]...
I have a 16GB Ubuntu Webserver running on a Transcend SMART CF chip (Yes I know all the reasons not to). I want to move that entire system (OS, Files and structure) to an external bootable HD that will probably be closer to 100GB. What's the easiest way to do this and have it be plug and play. By which I mean I can then plug the drive into a new system and boot it up just as it was running on the old system.
View 1 Replies View RelatedI have Installed Virtual Box 3.1.6 on my system. The host is running on SuSe 11.2 and I have installed the SuSe 11.2 as guest OS on the VBox. I have a another system in which I installed Win XP. How to make serial port connection between the VBox and Win XP system.
View 2 Replies View RelatedAssume I have plugged in an external USB hard disc.
How can I find out (from terminal cmdline) the file system (ext2, ext3, reiserfs,...) of this hard disc?
From Ubuntu I know the two commands:
sudo blkid -c /dev/null
or
sudo fdisk -l
but these are not known in CentOS.
What are the corresponding cmds in CentOS?
I have a Toshiba laptop with a Intel X3100 graphics card and I'm using a second LCD display with it ( it works ok as an extension to my notebook's display ) My question: is it possible to configure the system so that one virtual desktop is my laptop lcd and another the external lcd ? Mine has a native resolution of 1280x800 and the external one 1280x1024 and I'm running Ubuntu 9.10
View 3 Replies View RelatedI have an external hard drive that I use to store the My Documents folder from my Windows partition. I want to be able to automatically have all of my saved documents from Ubuntu go there as well. How do I configure that?
View 2 Replies View RelatedI'm going to reformat my external drives to get rid of the crud that I've built up. (Crud being incremental backups, windows software, and similar things.)(I also want to get rid of the FAT32 file system that they use.) These are USB 1TB drives. The theory is that data is written to it once, but read back a number of times. (I also burn that data to DVD. If there was software that could organize 5TB of data on DVDs, I'd be using them.)
I"m trying to decide whether to use ReiserFS, Ext4, or another file system. Basically, I want something that:
* Won't get corrupted when the power fails;
* Can handle files that are 4+GB in size;
* Uses extends --- preferably without user intervention;
My father installed Kubuntu to his external hard drive to try it out, however, it is running extremely slowly. It takes a good minute and a half to boot to the Plasma desktop and it even seems to run faster off of the LiveCD.His system easily meets the specifications to run Kubuntu (4 gigs of RAM, decent NVIDIA graphics card) yet it slows to a crawl immediately upon booting. Does anyone know how to fix this? The hard drive is a Western Digital MyBook, 475GB model.
View 4 Replies View RelatedHow can i find through terminal that which devices are external and which are internal.
By external i mean devices attached to USB port. For Example, USB Drive, Portable USB HardDrive etc.
By internal i mean devices attached internally. For Example, SATA Harddisk etc.
I've installed Ubuntu 11.04 Natty Narwhal on a External HDD (320GB Samsung S2). Worked like a charm. Bit slow to boot up and load programs, but after a while, works great. I installed it on the external HDD for one purpose: Work anywhere with Ubuntu, no matter which computer I use. I was thinking that was impossible, but I've tested thru several platforms (3 Notebooks, 2 netbooks, all Intel and one AMD Desktop). All worked flawlessly (32 Bits PAE activated and no matter how many cores are active, just works), BUT the themes.For no apparent reason, themes works on the computer I've installed Ubuntu on the HDD. It has his own Internal HDD with Windows 7 and two NTFS partitions.
Themes are stuck to the default boring-white from Gnome. I can only change the window controls. Compiz works, Wireless works, video works, sound works, filesystem works, system works - themes fail. Feels like I've hit my feet's little finger on a chair. P.S.: Ext. HDD is partitioned like this: 300GB FAT32 (it's my pop's HDD, he wants it this way), 18GB EXT4, 2GB Swap.
[Code]...
i needed to change my external hard drive's file system from ext3 to fat32, to use it in windows, which i did the simple way: i shrunk the ext3 partition, made a fat32 partition, copied the files over, removed the ext3 and made the fat32 bigger. unfortunately, while gparted was making the partition larger, my computer shut down. i lost all my files and the partition messed up immediately. i made a new fat32 partition, after deleting the old one, but noticed that gparted was showing 100 gigs already in use (???). so now i have a 300 gb hard drive with only 200 gb i can use; i ran df to make sure gparted wasn't messing up, but indeed it shows the partition as being only 200 gigs in size. i haven't tried making any other kind of partition yet, such as ext3, for fear of losing my files again, and because it wouldn't be permanent anyway, because i need those files in windows and stupid microsoft won't make their OS ext3 compatible.
View 2 Replies View Related