I have been unable to boot my CoreExpress Atom Z530 based board from flash, because my 2.6.31.6 kernel does not seem to have support for the (US15W chipset) IDE controller configured. I have read many web links that point to CONFIG_PATA_SCH as the key, but that does not work for me. I _can_ boot RedHat 2.6.18-164.e15 which does not have CONFIG_PATA_SCH configured, but I believe they are using initrd.
View 1 RepliesI have SSDs connect to my Linux machine through the LSI SAS/SATA 1068E controller. I've been trying to issue a ATA secure erase command to my SSDs, but I keep getting error. In fact even hdparm -i fails.
# hdparm -i /dev/sda
/dev/sda:
HDIO_DRIVE_CMD(identify) failed: Invalid exchange
HDIO_GET_IDENTITY failed: Invalid argument
Initially I thought there was some kernel configuration issue, so I tried connecting a SSD to the on board SATA and I no longer get errors. The secure erase worked. It seems there is some compatibility issue with hdparm and the LSI controller/driver I'm using. Any way to make hdparm play nice with my LSI controller? Has anyone had success getting hdparm to work with drives connected to an LSI controller?
Additianal info:
Linux Kernel: 2.6.30
hdparm: v9.27
LSI driver: Fusion MPT SAS Host driver 3.04.07
I had tried to build up my linux box as Domain Controller and DNS for serving clients of windows xp. But it didn't succeded. Its always giving error of DNS SRV record. I already created SRV records and the service is also started. Please Send me the complete configuration of LDAP CUM DNS on rhel5.
View 4 Replies View RelatedIs it possible that CentOS 5.5 does currently not support Oxford's OXPCIe952-F serial controller chip? We've added one of those PCIe x1 cards to one of our servers since we need additional serial interfaces but it doesn't seem to work. Instead of three serial ports (the server comes with one already, the controller adds two more) we still only have ttyS0:
Quote:
root/linux2$ zgrep ttyS /var/log/*
/var/log/dmesg:serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
/var/log/dmesg:00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[code]....
I'm trying to find out when QME2572 (Qlogic) card became support by the kernel. We have a RHEL 5.1 system that is moving to new hardware, however the kernel at this release doesn't support the new hardware, due to the Qlogic card change. I tired the Redhat KB and Bugzilla. Is there a Kernel change list etc I can search. Never really played around with the kernel too much so I'm just after some pointers for looking up this information. Offically its not supported until Redhat 5.3, I'm trying trying to research kernel info so I can tell the customer they have to upgrade.
View 3 Replies View Relatedmegaraid controller and Dell2850, all that I can see on thi screenshot:
[URL]
All drives successfuly passed verifing from LSI controllers (Ctrl+A at startup), also I tried to boot from rescue llive cd and mount all the morrored drives and check it by fsck - ok.
why doesnt work in slackware? i have no skills to try it, or to do some packages. but......its posible?
Pat? Rob? Eric? God?
why i cant do to use slackware in my asus eeepc1201ha??
I can not get the node or cloud controllers to startup using the init.d scripts. I have a fresh install of CentOS 5.4 with Eucalyptus 1.6.2 I have compiled Eucalyptus and all packages using the RPM supplied from Eucalyptus and utilizing yum installer. I do not currently have any processes or applications listening currently on the ports on the boxes as well. I think it may be a permissions issue or something because I get a "permission denied error", but I am not sure if it is Eucalyptus or CentOS. It looks as if it is not binding to the address on the interface of the NIC. It may be something else however. I have the Node controller, Cloud controller, and Cluster controller on seperate physical boxes. When I try to run either the cloud controller or the node controller I get this message:
Cloud Controller:
[root@cluster-cont ~]# /etc/init.d/eucalyptus-cc start
Starting Eucalyptus cluster controller: (13)Permission denied: make_sock: could not bind to address [::]:8774
(13)Permission denied: make_sock: could not bind to address 0.0.0.0:8774
[code]...
The Poulsbo support page here: [URL] suggests that Poulsbo support is broken in 10.10 but 'Excellent' in 9.10. When I installed the driver in 10.10 it installed OK, and works OK except for video playback. When I then tried to install it on 9.10 using the same procedure, it downloaded the drivers but then did not automatically build/install/configure them, and there was no change to the video behaviour. I presume it simply didn't execute the relevant scripts etc after downloading the packages. What might have gone wrong ? What else can I try ? The terminal command I used in both cases was similar to this:
sudo add-apt-repository ppa:gma500/ppa && sudo apt-get update && sudo apt-get install poulsbo-driver-2d poulsbo-driver-3d poulsbo-configThe system is a Dell Mini 12, which uses the Intel GMA500 Poulsbo chipset.
I installed Slackware Linux 13.1 on my Dell Inspiron Mini1010. The description is
[Code]....
and the "lspci | grep VGA" command shows this 00:02.0 VGA compatible controller: Intel Corporation System Controller Hub (SCH Poulsbo) Graphics Controller (rev 07)
Basically i want it so that the analogue stick on my PS2 controller, which connects via a USB adaptor and is recognized, correctly controls in game characters. It seems to work fine enough in platformers, at least it does with Banjo Kazooie, but with games like perfect Dark it seem to be trying to move forward and look down at the same time, also backward and look up simultaneously and look sideways and move sideways simultaneously , rendering the game all but unplayable.
I have tried running jscal and, apart from the fact that it seems a bit beyond me, it reports "jscal: missing devicename" when i try to run "jscal -c". Do others out there have there analogue sticks working correctly with games like Perfect Dark, or the James Bond games, for example?
The intel <Xorg> driver provides 2D and 3D support for Intel integrated graphics chipsets, including the i810, 915{G,GM}, 945{G,GM,GME}, 946GZ, 965{G,GM,Q}, G33, Q33 and Q35; the <GMA 500> is not supported.
Packaged for Debian as xserver-xorg-video-intel. [url] [url] [url].
Poulsbo is the codename of Intel's second-generation ultra mobile PC chipset. Its GMA 500 graphics core is not supported by the intel Xorg driver; ITP xserver-xorg-video-psb filed as Debian bug #533450.
Poulsbo (chipset) - Wikipedia, the free encyclopedia - [url]
Poulsbo's graphics core GMA 500 is currently not well supported by Intel for the Linux platform.
However there is a quite easy way to have the drivers work on any Debian-based distribution, thanks to the Ubuntu sources and packages, for the linux kernel 2.6.30 (with newer kernel it would need a little hacking but seems still possible while the sources are included).
I couldn't find a way to set/increase the external monitor resolution using Ubuntu (10.10) with the PSB drivers. I tried to use the xrandr commands like shown here: [URL] without success.
View 1 Replies View RelatedDoes this mean kmod-xfs is no longer needed in centos 5.4 x64?
View 2 Replies View RelatedAt the school i work in i have a server2k3 server that provides a domain to all the windows clients, aswell as a fedora server that acts as an imaging machine and webserver.
Im rather concious of the fact that if for any reason the Server2k3 server was to die there is no backup of active directory, or anything that can take its place whilst a replacement is found.
So is it possible to use a fedora machine with samba as a secondary domain controller? so it can be used as a login server, and has a copy of AD.
I just want to know what is the default Fedora 32 bit kernel - does it support more than 4G memory. I would like to save myself from compiling custom kernel and all following fiddling (nvidia drivers, virtualisation software etc) and 64bit OS is not for me - too many apps that I need are missing, of poor quality or need more manual intervention. Actually if bigmem / whatever it is called is configured in the default kernel, this may be the reason to switch. I intend to use 4 to 8 GB memory and it's a desktop, so server builds (like Ubuntu) are not for my taste.
View 2 Replies View RelatedA while back I compiled a custom kernel, 2.6.35. I forgot to add UDF support when configuring and compiling. Will I need to re-compile the kernel to get UDF support or is there some other way I can add it?
View 6 Replies View RelatedI am in verse to perform TCP Traffic Tests and need to know if guest OS has SMP kernel support. How can we know if guest OS has SMP kernel support?
View 3 Replies View RelatedI use Slackware 13.37 32-bit version on ThinkPad X60s. I compiled two Window Maker dockable applications monitoring the processor temperature, fan speed, and battery status: wmpower (see: [URL]) and wmlenovo (see: [URL]). Both these applications refuse to work.
wmpower displays the messages:
Code:
CPU frequency scaling available
No power management subsystem detected
No power management support...
wmlenovo displays the message:
Code:
No ACPI support in kernel
Did I missed something obvious during the configuration of the system and ACPI doesn't work for me or there's some more serious problem with my system?
I am a long time (1.something) slackware user and maintainer of a mirror site.I'm suddenly having problems with my favorite distro. (1) I've been mainly running Slackware64. When I was experiencing recent problems on a Slackware (32) 13.1 system, I discovered the huge-smp kernel does not support more than 4G of RAM. This is an obvious bug, and I am shocked that there is no fix out yet. Surely I can't be the only Slackware 32 user with >4G of RAM. I've verified it on a 12G i7 system and an 8G Athlon64-X2 system.
View 4 Replies View RelatedI am installing a new large 4 Tb RAID (hardware) under 9.10. Does GPT support come by default in the new 9.10 kernel? How can I check? I gather I need to use PARTED to make a GPT partition table on the raid. Anyone know details of how to do this? [URL]...
View 2 Replies View RelatedI'm experimenting with a load balancing setup and have found some pretty good guides, but they all assume that ipvs support is built into the kernel already. e.g. http://www.howtoforge.com/high_avail...apache_cluster
So of course "modprobe ip_vs_dh" simply outputs "FATAL: Module ip_vs_dh not found."
How i can do disable support SMBus for kernel? What is parameters of kernel-config do enable SMBus?
View 2 Replies View RelatedI am currently considering upgrading my system to
[URL]
with
[URL]
and I have done some research on the Realtek ALC892 chip and I am unsure if it will work. I am currently running Linux Mint 10.
I see that Realtek offers a driver but I have not found anybody who had success or if it was built into the Kernel.
I want to know what kernel varaints different distros of linux support. As of now, I am downloading OS and running:
rpm -qa kernel-*
to find out if it supports smp,PAE, xen or default kernel.Is this right way to check?
I'm using asus usb n-11 wireless adapter.Default kernel module drivers/staging/rt2870sta.ko hasn't id of my adapter. Please add this two strings to next kernel release
--- drivers/staging/rt2870/rt2870.h 2010-05-18 13:09:13.262882659 +0400
+++ drivers/staging/rt2870/rt2870.h 2010-05-18 12:10:20.000000000 +0400
@@ -85,6 +85,8 @@
[code]....
I compiled my own kernel with tun/tap and bridge support. Both modules load fine at boot time (I could read that in the dmesg output). Now I want to use it, and the /dev/net/tun node is not there, so my application gives that error. I'm trying to bridge openvpn connections. Is it possible that udevd is not doing his work?
PS: I'm on a WD MyBook World Ed NAS device. It's ARM, so I cross compiled the kernel from my debian linux machine. I also installed debian on the NAS.)
I was wondering if there's a way for me to get real-time kernel support on regular Ubuntu 9.10 through some sort of update. I know Ubuntu Studio has a real-time kernel, but I'd prefer not to use it. I'm a fan of the original Ubuntu.
View 1 Replies View RelatedI just installed the latest version of Ubuntu 10.04 LTS, and am wondering if support for my dual AMD processors is built into the generic kernel, or do I need to compile a custom kernel? I have an HP tx2-1025dx touchsmart.
[Code]....
I have a PCI SCSI controller with this chipset that was working fine in 10.04 to drive a Polaroid Sprintscan 35 Plus scanner. Having just run the upgrade to 10.10, the scanner is no longer being seen. If I go into the controller BIOS the scanner is seen there, and running lspci shows the controller as
Code:
SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 04)
Running
Code:
sudo modprobe -l | grep "sym"
shows only
Code:
kernel/drivers/scsi/pcmcia/sym53c500_cs.ko
kernel/drivers/scsi/sym53c416.ko
kernel/drivers/usb/serial/symbolserial.ko
Seems like support for the 53c8xx chipset has disappeared?