How can we write arrayValues in file? Lets say arrayName=(1 2 3 4 5) Now if i want to write these arrayValues into file
In first line in file :1
In second line in file :2
In third line in file :3
In fourth line in file :4
In fifth line in file :5
I have been trying to write a simple snip of bash shell code to import from 1 to 100 records into a Bash array.
I have a CSV file that is structured like:
record1,item1,item2,item3,item4
record2,item1,item2,item3,item4
record3,item1,item2,item3,item4
record4,item1,item2,item3,item4
And would like to get this data into corresponding arrays as such:
$record1[item1-4]
$record2[item1-4]
$record3[item1-4]
$record4[item1-4]
i am having a the following line in a file
<property name="connection.password"></property>
i have to give password in this line, like this
<property name="connection.password">XXXXXX</property>
Is this possible to acheive this using sed command
Beause i have to do this for n number files. so if i have option in sed for this the i will be doing this using script.
I am using Grass GIS
I have written a script which outputs a list of numbers to a file
code snippet:
r.stats -1 fs=, input=Bones_AVE > /home/gary/AVE_monte_carlo/rstats_AVE$i.csv
so this makes acsv file with one column. I want to run it again but rather than outputing to a new csv i want to add it to this one as the next column. For this example there will be 100 rows per column.
the 1st one will make the file
[grassGIS code]> /home/gary/AVE_monte_carlo/rstats_AVE.csv
add ',' after each value
the next one
[grassGIS code] open file /home/gary/AVE_monte_carlo/rstats_AVE.csv
[Code]....
Is it possible to write ksh script in the spec file? The target is after I perform
rpm -i my_rpm.rpm
According to the spec file, ksh script will do some installation & configuration. For example run other script and edit some files.
I have custom software that writes to a sensitive large file when the user does something. I would like to make backup copies of The file that gets written to, but if I make a gzip of the file at the same time someone is changing something, it will corrupt the backup because some of the data will be missing, as its backed up during being written to.
a) Is there a way to detect if a file is currently being accessed/written to?
That way if its currently being accessed, I can just make the script wait until its done and then finally back it up.
b) Instead of backing up the large file while it has potential to get written to, would it be better to make a copy of the file first, then gzip the copy? This idea comes from the fact that gzipping the original takes 5-10 seconds, whereas making a copy only takes 1-2 seconds. The less time, the less chance of corruption.
c) Is there anyway to freeze a program or a file to stop it from being written to for an amount of time?
With a, b, and c together. The best solution I have to my problem would be a script that first detects rather the file is being accessed. If not, it would then freeze the file/program and then make a quick copy of it. Once the copy is created, it will unfreeze the original file/program and then go about gzipping the copy.
is it possible to write ksh script in the spec file? the target is after I perform rpm -i my_rpm.rpm according to the spec file , ksh script will do some installation & configuration for example run other script and edit some files
View 5 Replies View RelatedGo to a specified directory and open a log file and parse out specific information and dump it into another text file.
View 4 Replies View RelatedI just noticed on my Ubuntu machine (ext3 filesystem) that removing write permissions from a file does not keep root from writing to it. Is this a general rule of UNIX file permissions? Or specific to Ubuntu? Or a misconfiguration on my machine? Writing to the file fails (as expected) if I do this from my normal user account.Is this normal behavior?Is there a way to prevent root from accidentally writing to a file (Preferably using normal filesystem mechanisms, not AppArmor, etc.)
I understand that root has total control over the system and can, eg, change the permissions on any file.My question is whether currently set permissions are enforced on code running as root. The idea is the root user preventing her/himself from accidentally writing to a file. also understand that one should not be logged in as root for normal operations.
I have a file named file.txt with the following contents
Code:
19 man
24 house
44 dyam
90 random
I want to read the file into array and store each line in each index. I've tried using the following code.
Code:
dataarray=($( < file.txt ))
It stores each word in each index rather than each line in each index.
I need to parse through a file which contains timestamps of transactions. What I am trying to do is come up with a Max Transactions Per Second (TPS) value. I was thinking that creating an array variable would be the way to go, but I'm having problems determining even how to start.
View 4 Replies View RelatedI have a RAID 5 array, md0, with three full-disk (non-partitioned) members, sdb, sdc, and sdd. My computer will hang during the AHCI BIOS if AHCI is enabled instead of IDE, if these drives are plugged in. I believe it may be because I'm using the whole disk, and the AHCI BIOS expects an MBR to be on the drive (I don't know why it would care).
Is there a way to convert the array to use members sdb1, sdc1 and sdd1, partitioned MBR with 0xFD RAID partitions?
I'm writing a bash script where I read a text file (containing a column of numbers) and store each line in an array. There seem to be some problems with the whole thing however, but only for some files and not others. Here's what I do:
Code:
#!/bin/bash
file=time_notOk.txt ### The file with a column of numbers
i=0 ### Array counter
### Read the file
[Code]....
I have an array called arrayini which stores numbers. I want to take log to the base 2 of each of the numbers in that array and put it in file called result. I've used the following code to do it.
Code:
size=${#arrayini[@]}
for ((i=0;i<size;i++))
do
echo "scale = 12; l(${arrayini[$i]})/l(2)" | bc -l
done >result
It works fine but its taking pretty long to calculate since I've got about 230,000 items in the array. So I decided to store the result into an array hoping that it'd be faster. I tried the following code. arrayresult is where I try and store the result. The code doesn't work because of the second last line.
Code:
unset arrayresult
size=${#arrayini[@]}
for ((i=0;i<size;i++))
do
arrayresult[$i]="scale = 12; l(${arrayini[$i]})/l(2)" | bc -l
done >FILE2
There is a syntax error clearly.
I have to read a couple of numbers from a random.txt file. In this .txt file there are random numbers. They are separated by a space. Example if you opened test.txt:
test.txt :1 6 1 3 6 8 10 2 4
I would like to read those numbers using CAT and store them into an array:
numlen=${#num[*]} - (must be like this because it is a part of a larger program)
I am running Intrepid Ibex 64-bit, and I have recently ripped a cd with EAC on one of my windows boxes, and it produced a cue sheet and one single wave file for the entire cd. My question is this, is it possible to take the wave file, burn an ISO image that acts exactly like the original cd? In other words, take the single wave file, using the cue sheet splitting it back into it's individual tracks, and then reading the subsequent ISO image from a program like Sound Juicer, so it can write all the metadata and convert it with my own preferences. I know this is a very strange predicament, but it's one that would save me a world of hassle.
View 5 Replies View RelatedI am trying to write into a single log file from 3 different applications in C. In one of the applications I am forking out 5 instances. I would like to know what is the best way to open and close the log file in which i want to write from these applications. Should I open and close it at the start and end of each application or is it ok performance wise if i open and close it inside the log function which will be called for every write.
View 6 Replies View RelatedAlright, so I have been trying to resolve this issue for awhile, but now feel like help is very necessary.I have a 128(by)128(by)128 array in a MAT file, and am using the following MATLAB script to convert it to a DAT file:
load C_42.mat
fid=fopen('C_42.dat','wt')
fwrite(fid,Nu)
[code]...
I recently upgraded my file/media server to Fedora 11. After doing so, I can no longer copy large files to the server. The files begin to transfer, but typically after about 1gb of the file has transferred, the transfer stalls and ultimately fails with the message:
"Error writing to file: Input/output error"
I've run out of ideas as to what could cause this problem. I have tried the following:
1. Different NFS versions: NFS3 and NFS4
2. Tried copying the files to different physical drives on the server.
3. Tried copying the files from different physical drives on the client.
4. Tried different rsize and wsize block sizes when mounting the NFS share
5. Tried copying the files via a different protocol. SSH in this case. The file transfers are always successful when I use SSH.
Regardless of what I do, the result is the same. The file transfers always fail after approximately 1gb.
Some other notes.
1. Both the client and the server are running Fedora 11 kernel 2.6.29.5-191.fc11.x86_64
I am out of ideas. Has anyone else experienced something similar?
I'm not able to write to a file using my perl cgi script which is as fallows:
Code:
#!/usr/bin/perl -w
use strict;
print "Content-type: text/html
[Code]....
Is it possible to forbid that more then one user open the same file in rw mode? In windows when you open a file that another user is using, there's ad advise and you have to open it in read only mode
I installed ubuntu 10.04 desktop edition on 3 pc (there is not a server-client architecture). I installed samba.(and smbfs)
put the strings:
[name]
comment = ...
path = /...
guest ok = yes
read only = no
create mask = 0777
directory mask =0777
Computers that access to that directory do (on boot, with root privileges)
mount -t smbfs -o username="user",password="pass" //192.168.0.12/name /mnt/cartelladimontaggio
But if two users access to the same file, both are authorized writing on it! So changes made by one are lost when the other save.
I have 3 c files(one of them forks out 5 instances) all writing to one log file. Now to avoid the confusion of opening and closing in each application or instance and running into a situation of not having closed a file I decided to open and close the log file inside the log function for each write.
So what I do currently is fopen, flock, fwrite, unlock, fclose for each write. All the log messages from all the files get written fine and there are no errors but I see a performance hit. The applications talk to each other using SHM(shared memory). So when I try to set a timer and check number of messages lets say I get X messages. Each time I remove or add a log call the number of messages changes. When it is a 1 sec or 5 sec timer it doesnt make a very big diff..few hundreds but when I check it over a longer period..every log call added decreases 1000 messages in count. So I want to know what is an efficient way of implementing the custom log across the application.
Code:
int main ()
{
[code]...
i am trying to create a floppy boot disk as my computer doesnt support booting from cd. I have downloaded ntrawrite and placed it in a file with the sbm file and followed these instructions [URL] which i found here.
when i type in the command i get the response "ntawrite is not recognised as an internal or external command"
Is the problem that im not opening the cmd in the right directory? I dont know how to change this.
I am trying to read a file character wise and trying to write the same character to another file. In this process, I unable to read and write white spaces successfully to the new file. The script reads the white spaces but while writing the white space is lost. The section of the code, is given below. Please advice how can i read and retain the white space while writing to a new file.
Code:
if [ -s f_test.txt ] && [ -f f_test.txt ]; then
echo "File Exists !!"
while read -n1 char; do
[code]....
it is about the program sha1sum to create SHA1-hashes. As you probably know, SHA1-Hashes do have the length 20 byte. So when I just type:
Code:
sha1sum myfile
it produces an output of
Code:
(some20byte) myfile
just as it should. Now I want to store the 20byte hash in another file, I use this command:
Code:
sha1sum myfile | awk "{print $1}" >> myhash
Unfortunately I'm not familiar with awk, but this should cut off the end of the sha1sum output, which is the name of the file again. The problem here is: The newly created file myhash has the size 41 bytes, and printing it out I can see that it is not the original hash (I wrote a little program to print it bytewise).
My program need to monitor the foler to know which file under the folder is being opened/created for writing. I add the folder into watch list using inotify_add_watch, when a file -- say 'AA' -- is created, I'll get the event through read api call. But the inotify_event only have file name 'AA' and a event mask. these parameters can't help me to know how the 'AA' is created/openned. So I have to scan the /proc folder to get to know how is 'AA' created/openned. I don't think this is a efficient way, especially if there are lots of files are openned/created in a short time span.
View 3 Replies View RelatedThere is the Archive::Zip I think I can use with Perl 5.10 but I don't know how. I don't want to read or write any files, just zip something in memory, with best compression, like
$text = "this is a test";
$zippedtext = &Zip($text);
sub Zip {
[code]...
I guess it's only a few lines.
i am working on this thread: [URL] if it is better to open a file every time i need to write to it or should i keep a file open the whole time and when i am done with the script, close it and sendmail it out?
Or i just thought of this: i could keep concatenating to a string and just sendmail when done.
I have installed bluez libs,utils and all the requirements for bluetooth communication. And i am able to scan other bluetooth devices around. Will somebody please suggest me on how to start writing code for file transfer in bluetooth. Or can I get any packages online to do that for me. I am using RHEL5 and x86_32.
View 6 Replies View Related