General :: Boot Windows Partition On Startup Or Creating A New MBR ?
Aug 2, 2010
I have two hard drives in my desktop. One HD has a working Ubuntu system-hence the ability to post here- and the other contains Windows XP Pro. When the XP drive crashed I was able to re-install an image I had saved using Acronis. Unfortunately the dual-boot option at startup is no longer available. I can only boot to Ubuntu. Not so bad really but there are some programs on Windows that I need to use. Is there any way, using Grub perhaps, that I can reconfigure an MBR to include the second hard drive and the Windows system?
View 1 Replies
ADVERTISEMENT
Aug 30, 2011
I am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
View 2 Replies
View Related
Jun 20, 2011
I have the windows 7 install iso but no windows computers! startup disk creator only lets me use ubuntu variants. I have a mac and ubuntu 10.10, and i have so far found no way to write an ISO to a disk without paid windows applications like ultra ISO, its driving e ******* crazy, every time i want to write an ISO to a USB stick i need windows! and now i have a virus (trust windows)! Why can we only write .iso files to a disk in this world?
Can someone please point me in the direction of modern civilisation, were i can write an ISO to a pendrive for FREE with linux or macoh and i forgot to mention, im a sensible human being, so i dont have a disk drive - im not booting to the mac
View 9 Replies
View Related
Oct 4, 2010
I have been using Ubuntu 10.04 for awhile now, and I wish to create a partition for Windows 7 so that I can dual-boot. I know you all are cursing me right now, but I have no choice. I run too much high-end software for business purposes that I need to.
I have dual-booted before, but that was when I had windows xp on a primary partition, and I seem to recall that was necessary. I dual-booted ubuntu afterwards as a trial basis, and then I completely switched to Ubuntu 100% for the last couple years. Unfortunately I need to go back. Is it possible to create a file partition for windows as a secondary partition without wiping all my data?
View 1 Replies
View Related
Apr 2, 2011
I have a bit of a problem that I don't understand and would like some help please - I will try and explain the best way I can. I installed Ubuntu using the WUBI installer and so I can access my Windows partition in /host. Using Wine I can run World of Warcraft by going to /host/Program Files/World of Warcraft/WoW.exe But I would like to create a link on my desktop to that file so I do not have to keep going to that path everytime.
The Problem - when I click make link and drag it to my desktop I double click the file (expecting it to just act like a windows shorcut) but it doesn't - it creates some of the files that are in the world of warcraft folder on the desktop and then fails to open with message: Failed to open archive dataart etc...its like it is creating a copy of files on my desktop of what is already in the WoW folder.
View 2 Replies
View Related
Apr 27, 2010
Ive decided to create a new thread because my old one had become rather complicated and now had a misleading title.
I have a laptop with Windows XP and because of a few programs I want to keep it on and dual boot with Ubuntu. I have created a boot partition at the beginning of the harddisk because I had broken the 137gb and cant keep Ubuntu at the end and still make it bootable.
The separate boot partition is at the beginning of the disk and mounted as /boot in the installation.
The system still cant boot into Ubuntu, but at least grub shows up with a decent menu and I can choose Windows. When I try to choose Ubuntu it says that it cant find the specific drive. The UUID is the same as the boot partition
So what should I do now ? Should I change fstab and move some files to the boot partition ? Id rather not move the entire Ubuntu partition to the front.
Here is my boot info script
Code:
Boot Info Summary:
sda1:
sda2:
View 4 Replies
View Related
May 25, 2010
I'm running UbuntuStudio 9.10 on my Toshiba Satellite A40 Laptop... it's perfect and I love it... but, I installed it cleanly doing a reformat of the drive, and with no partition - so using as much of the newly replaced 80gb drive as possible.Now, if I want to create a partition to install WinXP as a dual boot, 1) can this be done? 2) what do I use to do it?
View 9 Replies
View Related
Oct 4, 2010
let me know the process to create Windows 2008 NTFS bootable partition from Linux?
View 1 Replies
View Related
Jul 27, 2009
I have a brand new thinkpad X301 with 4GB of RAM and thinking of getting fedora 11 on it. The plan is to have it triple boot with vista/seven and hopefully OSx86. I am aware of the 4 primary partitions limit on an MBR disk. I was thinking of having a swap file instead of swap partition and not creating a boot partition as well. If I install the boot loader(GRUB?) on the root partition will I be able to boot it without any problems by using vista's boot loader?
Or Maybe I should install GRUB on the MBR and add all the other operating systems on it? Does anyone have any objections for not creating a swap partition or a boot partition? When comes to desktop environment I've been using KDE in the past, is there any major advantage of using Gnome over it? KDE seems to look really nice on fedora where Gnome is maybe more stable?
View 4 Replies
View Related
Feb 18, 2011
I have just installed ubuntu 10.10 on my win7 laptop (Acer Timeline 3810T) with wubi. I can mount the laptop's windows partition with no issues using NTFS Config (after installing hal), but every time after I reboot ubuntu tells me that it cannot mount the windows partition. If I reopen NTFS config after reboot now my previously-mounted partition shows as having 0Gb of data and there is a new /host partition that represents the windows partition. I can then mount it again by renaming it into /media/Windows and it again works until a reboot.
View 3 Replies
View Related
Jun 2, 2010
I had to re-install Windows XP because the install was running slow.So, I created another partition using GParted for my personal data and moved my files there and re-installed Windows XP.Now, the Windows partition won't mount automatically.NTFS Configuration Tool shows 0.0GB. So, I have to open up a Terminal window, and issue sudo mount /dev/sda1 /media/Windows and everything is fine.
View 2 Replies
View Related
May 11, 2011
One of my disks in my computer crashed, it was the one containing /boot and some data partitions. The other system and /home partitions were on a second disk, which is ok.
I was wondering, can I create a new /boot partition, and keep on using the rest of the system? Can I somehow do it with a chroot from a live/installer disk, run grub, and use my system again? I have another disk which I can put in the system, but there is even an unused partition on the disk which is ok (but it is rather big for /boot).
View 3 Replies
View Related
Jan 31, 2011
1.After I install fedora14, I can not start window7,It shows only a transverse line shining .
2.when I comes into inux , execute "fdisk-l " ,it shows 'no invalid partition table' this two points have relationship?
View 3 Replies
View Related
Aug 6, 2011
This question made me wonder: "Can you run chkdsk using a Windows boot CD on a Linux NTFS partition?" Would it cause more problems, or fix them as in Windows?
View 1 Replies
View Related
Feb 3, 2010
I originally had my full hard drive as a full Ubuntu partition but I then re-sized that and installed Windows on a new partition. Now I guess the boot sector got overwritten and I don't have a choice to boot either Windows or Ubuntu. I know I have to reconfigure GRUB or another boot loader to allow the choice but I am not sure of how to go about that.
View 5 Replies
View Related
May 24, 2010
I have just updated my Ubuntu linux to Ubuntu 10.4, not my grub menu isnt letting me boot to Windows Partition.The problem seems to be with grubs new update from using an editable menu.lst file to using a non editable grub.cfg file. Everywhere I look it states "DO NOT EDIT THE GRUB.CGF FILE". I am at a loss as what to do. I figured that the new configuration has screwed up the Windows Boot File. Anyone have any suggestions on how to fix this. I am not sure if it is a windows issue or an issue with the Grub boot menu.
View 2 Replies
View Related
Aug 11, 2011
I have Vista Home edtion and Linux, I have formatted Linux partions and now that Grub is not letting me boot into Windows..I had C:wIndows D:New Volume and rest of the space was E:
View 5 Replies
View Related
Jun 14, 2010
I installed ubuntu using wubi and then I tried installing grub 2 but it failed. I need a way to reinstall the mbr sp it will load the windows 7 loader from the first partition.
View 1 Replies
View Related
Feb 16, 2011
i had created a thread in desktop environment and had received no comments, so posting it here again.
Had installed ubuntu alongside windows xp in dual boot. everything was working fine untill last week.
last week i did share a folder on NTFS partition from ubuntu to be accessed by my laptop which runs XP. i could access the folder after i ran this command from terminal "sudo smbpasswd -a myusername". After this i cannot boot to windows. it shows up windows screen and reboots again. ubuntu works fine. what do i do to get back windows XP to working again?
View 2 Replies
View Related
Mar 9, 2010
is it possible to use a Windows-based recovery partition on a dual-boot computer to overwrite the Ubuntu partition and remove the GRUB loader? For instance, if you booted up your computer, accessed the hidden recovery partition and used it to reset the computer to it's factory default settings, would that effectively remove the Ubuntu partition and the GRUB loader? Would a completely new installation of Windows overwrite/uninstall Ubuntu and GRUB automatically?
View 4 Replies
View Related
Mar 14, 2011
I'm trying to create an extended partition. In GParted, I shrunk the size of the existing partition and now want to create a new EXTENDED partition in the free, unallocated space. GParted only lets me create a PRIMARY partition. What am I doing wrong here?
Here's what I've got right now:
You can actually ignore the flag for the swap as "boot." That was me just messing around trying to get it to work. I've removed that flag. Not sure how the question of boot affects all of this...maybe it factors in somehow.
View 2 Replies
View Related
Mar 11, 2010
I am a newbie to Linux and I am using CentOs. I am trying to create a new partion on my CentOs VM. I create a new primary partition using fdisk (I use the command fdisk /dev/hda). After I create the partition and use partprobe to write the partition to disk, I try to give the new partition a label. So, I use the command e2label /dev/hda LABEL=test
However, when I enter the command e2label /dev/hda3 , it doesn't display the label for the newly created partition. Am I doing something wrong here? Is the syntax of the e2label command wrong when creating the label for the new partition? Did I miss a step after writing the new partition to disk.
View 4 Replies
View Related
Apr 18, 2010
I'm following the book RHCE book (5th edition) by Michael Jang. On the exercise on pg.140, creating partitions, I've created /boot (hda1), swap (hda2) and / (hda3). So far so good.
Next, I'm supposed to make an extended partition, containing the rest of the disk. So this should be hda4, right? But when I try to create either an LVM, or RAID partition, it creates hda4 AND hda5 under hda4. Why is that? Am I doing something wrong? The book next asks me to create /var as hda5, so if hda5 is already created automatically above, how am I supposed to create /var?
View 7 Replies
View Related
Feb 21, 2011
I'm using dual OS (XP and Ubuntu 10.04) and i have been using ubuntu for past a year, now i have a problem when booting, that i made by mistake.
I use Windows XP only to work with Photoshop other than that i mostly use Ubuntu for everything. Recently my windows xp got crashed, so without any idea i have reinstalled windows xp but now i cann't able to find my ubuntu. i don't know what to do right now?
Am i required to reinstall ubuntu (my most of the files are in ubuntu), is there any solution without reinstall.
I find that need to change the boot.ini, but i'm not getting any proper results
Note: Need to Change the booting from windows XP to promting for Ubuntu and Windows XP
View 9 Replies
View Related
Jan 28, 2010
I'm trying to set up a RAID1 partition on my Ubuntu 9.10 workstation.On this dual-boot system, Ubuntu is running from a separate drive (/dev/sdc - an SSD that is quite small, which is why I need more disk space). Besides that, there are two traditional 500 GB hard drives, which have Windows 7 installed (I want to keep the Windows installation intact), and about half of the space unallocated. This space is where I want to set up a single, large RAID1 partition for Linux.
(This, to my understanding, would be software RAID, whereas the Windows partitions are on hardware RAID - I hope this isn't a problem... Edit: See Peter's comment. I guess this shouldn't be a problem since I see both drives separately on Linux.)On both disks, /dev/sda and /dev/sdb, I created, using fdisk, identical new partitions of type "Linux raid autodetect" to fill up the unallocated space.
Device Boot Start End Blocks Id System
/dev/sda1 1 10 80293+ de Dell Utility
/dev/sda2 * 11 106 768000 7 HPFS/NTFS
[code]....
But so is "Device or resource busy" when trying to create the RAID array. Quite strange.
Update: Could the device mapper have something to do with this? How do /dev/mapper and dmraid relate to all this mdadm stuff anyway? Both provide software RAID, but.. differently? Sorry for my ignorance here. Under /dev/mapper/ there are some device files that, I think, somehow match the 3 Windows RAID partitions (sd{a,b}1 through sd{a,b}3). I don't know why there are four of these arrays though.
$ ls /dev/mapper/
control isw_dgjjcdcegc_ARRAY1 isw_dgjjcdcegc_ARRAY3
isw_dgjjcdcegc_ARRAY isw_dgjjcdcegc_ARRAY2
View 2 Replies
View Related
Jul 14, 2011
How can the number of inodes be increased on an existing EXT3 or EXT4 partition without re-creating the partition?
View 3 Replies
View Related
Jan 25, 2010
I'm using Karmic Koala 9.10 (amd64) on /dev/sdb6 and windows 7 on /dev/sda2. I mounted my windows 7 partition in Nautilus. I copied some files and made some folders from Nautilus onto my windows 7 partition. I tried booting into windows 7 but it failed on loading Windows 7. It then gave me a blue screen flashes and then restarted. The blue screen flashes so quickly i cannot determine the exact issue. I tried booting into windows 7 in Safe mode. It fails to load and gives what i believe is the same blue screen. I used to be able to read and write files onto my old XP and Vista partitions. Now with windows 7, I seems that I can't.
View 1 Replies
View Related
Jan 8, 2010
I want to encrypt Full partition instead of creating a file and encrypting it, and also want to move this disk to another server. do i need some files also (that hold keys) with my self on new server. i am using FC11.
View 2 Replies
View Related
Jan 5, 2011
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies
View Related
Apr 25, 2010
I was trying to install Debian 5.04 on a Mac G4, and in typical geek tradition, I didn't RTFM. During installation, I nuked all existing partitions, creating new to my liking. But as I learned later during the installation process, yaboot needed a NewWorld partition, so I can't boot the installation. I don't have any OSX CDs with me (this is a used G4 I purchased of craigslist) with which to create a HFS partition.I've re-run the Debian installer, which lets me create a partition that is supposed to be of type 'NewWorld', but the installer does not seem to like it or recognizes it.
View 1 Replies
View Related
