how can you set specific application's data to always reside in ram, so it runs and launches super fast all the time?
i recall reading about how you could put all your libs folders into ramfs once, but it took up a lot of ram, so i never bothered, and it was really just for faster (instant) launching times.
i just want to be able to set that for specific things, like for example, the GIMP and Inkscape.
I want to make specific keymaps for application, that working only in it and doesn't affect other apps.
For example, I already use my Caps key to toggle input language (via xorg.conf), but I want Capslock to behave like Esc in vim.
Looks like xmodmap doesn't have any options related to that.
I have a need to run a specific app as a specific user when the machine boots into init 3. I can not run this as root so I need to specify a user. Can someone tell me how to accomplish this?I usually have to log in and start this application by typing check -D which starts this app and daemonizes it. I want to be able to run that at boot with my normal user not root.I hope I explained this correctly.I have added it to rc.local but it runs as root.
View 3 Replies View RelatedHow do tell an application to open in a specific workspace?
More info:
I like to have my C++ IDE in workspace 2, my Java IDE in workspace 3, and my email, browser and miscellaneous in workspace four. I also use a shell script that executes upon log in code...
Of course currently it all opens in the current workspace... Is there a way for me to specify which workspace each command should start in?
How can I define a hotkey which will raise (and ideally also lower) a specific window or application?. Assuming epiphany is minimized, pressing F5 will raise the epiphany window. Pressing F5 again will minimize it. Something like guake/tilda.
View 6 Replies View RelatedI want to know, how to allow to a specific user to run an application (for example Virtual Machine Manager) without entering a password? I have tried to add this user into appropriate groups, but it didn't helped.
View 7 Replies View RelatedI want to remap my keys for a game I'm playing, for example WASD instead of arrows to walk, r, f, c to act like f1, f2, f3 and so on. I'm aware of xmodmap, but I want to do this just for one application and be able to use hotkey to toggle between this script and default setting. I've been trying to use AutoKey, but I cannot force it to work just for specific app. On windows solution is AutoHotKey, but it won't work through wine.
View 0 Replies View RelatedI have two sound cards in my computer. OpenSuSE 11.3 recognizes them both without a problem, and I can play sound through each of them. Is it possible to set one application to use one sound card simultaneously with another sound card routing to a different application? That would be sweet. For example, I have my surround speakers plugged into one sound card, so I can provide music for the whole room, and have my PC speakers next to the monitor playing a movie.
View 2 Replies View RelatedI am using ubuntu 10.04 and opensuse 11.3. I would like to know how to assign each application to a specific worksapce. For example，when I open a pdf file, it will be moved to workspace2. When I open a movie, it will be moved to workspace3. In Leopard, "Space" have such features. I would like to know the way to achieve this in ubuntu and opensuse, in an easy way, meaning that just need to install a small package, not a big one , like compiz
View 1 Replies View RelatedI just changed my windows to Ubuntu. Now I need to install software for my SLR camera, I tried to do an search on but end in vain. How can i use the sony software on my system.
View 4 Replies View RelatedHow to properly set some entries in:
$HOME/.config/mimeapps.list
so that:
*.odb files are opened by default with libreoffice base
*.org files (just org files not plain text files) are opened by default with emacs
For some reason I can not figure out how to proceed.
As far as I know - i.e. for what I have been reading in the documentation - the default application for a given MIME-type is specified by writing into the group [Default Applications] in the mimeapps.list file
My configuration is the following:
- 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u6 (2015-11-09) x86_64 GNU/Linux
- gnome desktop
concerning controlling the windows in virtual desktop.
a) Say to a application to be launched to virtual desktop 2 for example.
b) How can you ask from a virtual application to be only visible at one virtual desktop. For example I work on virtual desktop 6 and I want to start skype that should be on virtual desktop 2. Right now If I launch the app on virtual desktop 6 it will appear on the same one. Would it be possible to ask for an applicaiton to be launched on an other virtual desktop. If yew how?
I know that every .desktop file comes into the Applications section but how can I find the .desktop file for a specific application?
View 5 Replies View RelatedI have a laptop running Ubuntu hooked up to a TV via a VGA to S-Video converter with the VGA-out through an external monitor, and I am trying to find a way to set vlc or mplayer to open fullscreen in the external monitor by default. Eventually I want to be able to hit enter on a video file and have it play on the TV without any dragging to the external monitor. I have googled around a bit, checked the monitor settings options, and looked through the media player options but so far can't find anything.
View 3 Replies View RelatedI have this problem, that I want a specific .exe file to open in Mono, but all other .exe files to open in Wine.
However, the only option there is, are 'Select an application to open XXXX.exe and other files of type "DOS/Windows executable"'
but I just want to open THIS .exe file in mono, and the rest in WINE.
I have been in similar situations before, in that I opened a folder containing music with VLC, and it worked fine, but after that, it assumed that I wanted to open all folders in VLC.
I assume that there must be an option for this, and I can not see why it ain't an option by default.
(I'm using Ubuntu 10.10)
I use CentOS for the servers I am responsible for. This time, I inherited a piece of hardware that CentOS refused to boot up on, so I installed Fedora Core 14. I have NIS and autofs working -- mostly.The home directories reside on an EMC network storage device. The problem is that when I login as a regular user, all the files under the home directory are owned by nobody/nobody, instead of user/group. I believe this has something to do with NFSv3 vs. v4, but I have yet to find the right trick to fix it.
[Code]...
app deployment on Linux/debian and I'm using Debreate to create .deb packages which works fine. I install the software itself to /usr/bin but want to install the program's database to /home/username/myapp/ The problem is it that I don't know how to add the env variable 'username' to the target path. What is the exact syntax for this installation path?
View 3 Replies View RelatedI currently have my desktop setup with two displays, one of them being my living room tv that I run Boxee on. My problem is that all the audio runs through the same speakers preventing me from listening to music or gaming at the same time as when Boxee is in use.
I would like to know if it's possible to split the audio so that an application of my choosing only outputs sound through my headphones. I was thinking it would be possible with some of the controls in pulse, but if it is I cannot figure it out.
How can I force a Wine application (or Wine itself) to use a specific network interface? I have installed hamachi and am trying to play starcraft over virtual LAN. However, when I run Starcraft with hamachi running, it does not work. I have now determined that hamachi creates a network interface called "ham0". How do I force Wine/Starcraft to use the "ham0" network connection? I have looked into forcebindip but it crashes on wine.
View 1 Replies View RelatedHow can I force a Wine application (or Wine itself) to use a specific network interface? I have installed hamachi and am trying to play starcraft over virtual LAN. However, when I run Starcraft with hamachi running, it does not work. I have now determined that hamachi creates a network interface called "ham0". How do I force Wine/Starcraft to use the "ham0" network connection?I have looked into forcebindip but it crashes on wine .
View 5 Replies View Relatedi was wondering if there is away to avoid application from closing if a specific library not found? for example: if my application uses libPng and it wasn't found on the system running my app (binary and not source), is there anyway to just disable the part that uses png from my application?
View 14 Replies View RelatedI currently have two internet interfaces installed, one is ethernet (eth0) and the second is wireless (wlan0). Many command line applications allow you to specify which interface should be used, but many gui apps don't provide this option or at least I haven't found it. I have some questions:
1. How would I tell Firefox to use only my wlan0 interface? If it's possible in Firefox, is this also possible with Google Chrome?
2. If a program doesn't provide a command line argument to support this, is there a standalone application that could help manage preferences for multiple applications?
for example
else {
for fileDOC in $location/*.doc
do
[code]...
I am going to use "pthread_setaffinity_np" to bind a thread to a specific core. My application has two threads. I have used mutex to assign a specific id to each thread and then bind that thread to a core different from another core. but it seems that the os assigns both thread to one core.What should I do to bind each thread to a specific core?
View 4 Replies View RelatedSo, I have this application called Impact, it is an explicit time integration Finite Elements code written in Java...
[url]
I untar the pack, and launch the application calling a script, from within the untarred folder,
Code:
This launches a gui which allows me to setup a case, which needs some setup file, tipically some *.in and a mesh file, tipically some *.msh.
Other mode of executuion consists of calling the setup file as argument to Impact.sh script ( CLI execution mode, for g33k5 )
My problem is : I have packed the whole stuff into a Slackware .tgz, that places it in /usr/local/Impact, and placed a calling script in /usr/local/bin,
Code:
Code:
I decided to hack the ImpactGUI_OGL_linux_amd64.sh script from
Code:
Code:
no avail,
Code:
even after adding /usr/local/Impact/bin to PATH... won't go...
I can run this thing from within its directory... but I do not like messing within the directories of my applications, this is why I sent this to /usr/local, and placed a calling script in /usr/local/bin...
I want to record an internet radio station starting at 2:00am tomorrow morning. The specific program on the radio station lasts until 6:00am. The command I need to run to record the station is: Code:mplayer http://wjcu.jcu.edu:8001/listen.pls -ao pcm:file=indie_heat_of_the_night.wav -vc dummy -vo nullI'd use cron, but 1. I'm not sure how to and 2. it seems unnecessarily complicated for something that I only want to run once. If cron is the only/easiest solution, I guess I'll just have to resort to that, but I'd rather not.
View 12 Replies View RelatedHow do I give permission to a logged in user to stop/start a specific service without entering a root/sudo password? So they can do a simple "service SomeService stop|start" It is for a headless Ubuntu server.
View 5 Replies View RelatedI need to search a bunch of files in a specific folder for a specific number and add all the numbers together to a total sum. I use Rsync everyday, everytime I run rsync i get a logfile (rsync output) witch contains the textstring "Total bytes sent: xxxxxx".
The "xxxxx" can vary in lenght. I need to extract the "xxxxxx" from each file and add the numbers together to a total size over a week or a month. Is this possible? And I wish to only use bash. One way of doing stuff at a time my friends .
my system I want user1 and only user1 to be able to mount and unmount a specific partition, this partition contains backups and is usually mounted read only, needs to be temporarily mounted read/write by user1 while doing the backup.user1 is an unprivileged user. I've read that the user option will let any user mount the file-system (and only that user can then subsequently unmount it) and that the users option allows any user to mount or unmount the file-system.I also found this in mount's man pageQuote:The owner option is similar to the user option, with the restriction that the user must be the owner of the special file. This may be useful e.g. for /dev/fd if a login script makes the console user owner of this device. The group option is similar, with the restriction that the user must be member of the group of the special file.So it looks like I'd need a login script for that user to make the user owner of the device file (/dev/voiceserv/backup in this case)
View 7 Replies View RelatedI'm trying to configure our mail server to block email from a specific sender reaching a specific recipient. In other words, if one of our employees is getting harassed by a 'stalker', how would one go about blocking, at the MTA (Sendmail) level, a specific sender email address from reaching a particular users inbox? We do not want to capture the email - simply block it before it consumes server resources.The Sendmail server (MTA) is a front end to our Exchange server so no user accounts exist on the Linux server. We simply use it as a SPAM and Virus scanner then forward clean email to the Exchange server.
View 6 Replies View Related