General :: Serial Port Configuration - Write Or Read
Dec 1, 2010
I have a minilinux that I being working on, the problem now is that the serial ports doesn't seem to work (I have 4 serial ports).They don't write or read.
I run the command setserial g /dev/ttySx and it says that his IRQ are 3 or 4 (3 for ttyS0 and ttyS2 , 4 for ttyS1 and ttyS4)�but when I run the command: dmesg | grep ttyS the IRQ�s are 0 for ALL my serial ports� could be this the reason why my serial ports aren�t working right??? And if it is how can I solve the problem??
View 2 Replies
ADVERTISEMENT
Mar 31, 2011
I need to read and write to a serial device. When I connect via gtkterm, I need to toggle DTR before I can communicate with the device . My problem is that I cannot emulate this in C++.
I want to write some code that can setup a comport, toggle the DTR, then read and write strings to the port. However all my attempts have been fruitless. My serial settings are B9600, No parity, no hardware control, 8 bt characters and 1 stop bit:
Code:
#include <iostream>
#include <SerialStream.h>
#include <sys/ioctl.h>
#include <fcntl.h>
using namespace LibSerial;
[Code]...
View 1 Replies
View Related
Mar 8, 2011
I'm currently developping a C program to drive a Telit GM862-GPS module using the serial port of an embedded board (SBC9261).The communication with the module is based on AT commands : I just send my command to the module, through the RS232 line, and the module answers immediately.Here's an example with a basic command returning the GPS's acquired position, sent with Minicom :
Code:
AT$GPSACP
$GPSACP: 104323.000,4x45.6171N,00x38.6219E,0.8,446.5,3,272.14,0.21,0.11,080311,09
[code]...
View 4 Replies
View Related
Mar 10, 2010
I am trying to send text data from one PC to other using Serial cable. One of the PC is running linux and I am sending data from it using write(2) system call. The log size is approx 65K bytes but the write(2) system call returns some 4K bytes (i.e. this much amount of data is getting transferred). I tried breaking the data in chunks of 4K but write(2) returns -1.My question is that "Is there any buffer limit for writing data on serial port? or can I send data of any size?. Also do I need to continously read data from other PC as I write 4K chunk of data"Do I need to do any special configuration in termios structure for sending (huge) data?
View 4 Replies
View Related
May 23, 2010
I am using a F232 USB to serial adapter for connecting my wireless modem to my laptop and I wrote a simple C code for reading data received by the modem transmitted by another modem installed on my target device.The problem is my code is simply giving 0.00000 (float data) output .When I use the same code with my desktop its running fine and I am getting relevant data.What may be the problem? I even changed the permission for my /dev/ttyUSB0 I am using Ubuntu 10.04 on both my laptop and desktop
below is my code
Code:
#include <stdlib.h>
#include <math.h>
#include <errno.h> /* Error number definitions */
#include <termios.h> /* POSIX terminal control definitions */
[code]....
View 5 Replies
View Related
May 5, 2010
I am trying to write some code that interfaces with an AVR over a serial port. Basically I send a command then read the output which is 6 bytes. I need to receive all 6 bytes before the program continues. Is there a way to do this? If I use read() it returns -1 unless I add a delay before reading the port. Is there a way to get it to read the 6 bytes as soon as they arrive?In python you simply say how many bytes you want and the max time you are willing to wait which seems a whole lot easier than read
View 1 Replies
View Related
Aug 25, 2010
i want to try with a small application in linu in that i want to read some data from controller using serial port and i wanna transfor that data to another meachin in the network for this i want serial port interfacing programming as well as socket programming.
View 1 Replies
View Related
Oct 30, 2010
I am writing a C program which reads data over serial port. While reading data, if I send my data(which is a 13 byte structure) periodic with a period of 1 second for 10 times I read it without problem and I read the data 10 times as I sent and as I expectBut if I send data continuousuly(without any time interval between each sending) 10 times I can only read 1 of them(I can only read it once).
View 11 Replies
View Related
Aug 5, 2010
trying read serial COM port and want to write that received data to file, now its writing only one sentence, but i want to write full file which coming on serial port, as i'm sending file from hyper terminal and reading on linux pc, If i put while loop its not writing anything,without while loop its writing only one line and if send big file then application terminates and then writes to file.But i need do write any size which coming on serial port.Finally i want write full file which is coming on hyper terminal, after writing the file it has wait for next data. This is my code,
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
[code]...
View 9 Replies
View Related
Jul 6, 2010
I am implementing a simple serial protocol where my ARM9 board, running Linux is communicating to a slave peripheral board. The Master sends a 12 byte data stream and the peripheral board returns status in a 23 byte response. The serial port is opened in raw mode. It works perfectly on 44 reads; however, on the 45 read the data returned from the read() is incorrect. I've framed what's being sent on an oscope and it is correct.The coincidence is that 23 x 44 = 1012. It's as though the receive buffer is 1K and when I go past the boundary I get bad data. The read following the bad one is good again.I've tried flushing the buffer before reading but get the same result.Here's the port initialization code:
Code:
int initport(int fd)
{
[code]...
View 4 Replies
View Related
Jan 13, 2010
I am trying to get two way serial communications going between a Windows XP system and a Linux system (RHEL 5).I have /sbin/agetty -L 9600 ttyS0
in /etc/inittab. I am using a generic USB to serial adaptor on Windows (Unitek) and a null modem cable. I have putty configured for 9600 baud, 8 bits, no parity, one stop bit, no flow control.I get the login prompt from agetty in the putty window but input does not work; I see weird characters in the putty screen. I can echo output into the device from windows and see it, but
cat < /dev/ttyS0. just prints out weird characters from what I type.
View 3 Replies
View Related
Dec 28, 2010
I'm using the serial port of a device to communicate with a hardware. (that can assume some different configurations of baud rate, data bits, etc.) Well, I can obtain that configuration, but I'm not certain in how to apply them to the serial. I'm using the struct termios to do that. I did some search, and found how to configure the baud rate and data bits. I'm doing this:
[Code]....
how I set the stop bits (1, 1.5 or 2 bits), the parity (even, odd, none, mark or space) and the flow control (hardware, software, none or xon/xoff)?
View 1 Replies
View Related
Mar 5, 2010
I have an application where I am sending data via serial port from PC1 (Java App) and reading that data in PC2 (C++ App). The problem that I am facing is that my PC2 (C++ App) is not able to read complete data sent by PC1 i.e. from my PC1 I am sending 190 bytes but PC2 is able to read close to 140 bytes though I am trying to read in a loop.Below is code snippet of my C++ AppOpen the connection to serial port
Code:
serialfd = open( serialPortName.c_str(), O_RDWR | O_NOCTTY | O_NDELAY);
if (serialfd == -1)
[code]...
View 5 Replies
View Related
Jun 11, 2009
I am using read() in c++ to get data from a serial port. However, if no data is available on the serial port the function blocks until dta arrives.Example code:
//------------------------------------------------------------
char m_readBuffer[255] = {0};
char* p_curChar = m_readBuffer;
[code]...
View 1 Replies
View Related
Oct 11, 2015
When I plug in a usb flash drive, my Debian mount it, but when i am going to write, mkdir, rename file or paste a file permission denied.
The result of Code: Select alldev/sdc1 /media/usb0 auto rw,user,noauto 0 0
is Access denied
View 14 Replies
View Related
Mar 13, 2011
I just want to configure Vsftpd to allow users to have total access to the FTP server. The server and users are all on a private LAN behind a router with no access from the Net, so I don't need any security. The following basic configuration doesn't allow uploading files after I log on as anonymous/whatever:
/etc/vsftpd/vsftpd.conf
Code:
listen=YES
anonymous_enable=YES
local_enable=YES
write_enable=YES
xferlog_file=YES
#anonymous users are restricted (chrooted) to anon_root
#anon_root=/home/ftp/incoming
anon_root=/var/ftp
anon_upload_enable=YES
anon_mkdir_write_enable=YES
#chroot_local_user=NO
#chroot_list_enable=YES
#chroot_list_file=/etc/vsftpd.chroot_list
Here's what happens when I log on as anonymous/whatever and try to upload a file:
> ftp server
Connected to server.
220 (vsFTPd 2.0.5)
Name (server:root): anonymous
331 Please specify the password.
Password:<whatever>
230 Login successful.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ls -al
200 PORT command successful. Consider using PASV.
150 Here comes the directory listing.
drwxr-xr-x 3 0 0 4096 Mar 13 11:19 .
drwxr-xr-x 3 0 0 4096 Mar 13 11:19 ..
drwxr-xr-x 2 0 0 4096 May 25 2010 pub
226 Directory send OK.
ftp> put /var/tmp/ftp
local: /var/tmp/ftp remote: /var/tmp/ftp
200 PORT command successful. Consider using PASV.
553 Could not create file.
View 4 Replies
View Related
Mar 23, 2010
We have a new machine with RedHat enterprise 5 on it. I need to connect a serial cable to the serial port and talk to another system (old alpha system) instead of using a VT connected to the alpha.Does RedHat come with anything like Keaterm/hyperterm/etc etc?
View 3 Replies
View Related
Apr 14, 2010
I have a laptop which has only one serial port.
I went into:
How do I know which of those "ttyS" refers to my serial port?
View 2 Replies
View Related
Feb 6, 2010
How do I get syslog using serial port?
View 2 Replies
View Related
Apr 15, 2010
can we use inb() and outb() functions for serial port programming ??
View 5 Replies
View Related
Mar 25, 2010
I'm currently working on a project for university that requires communication, via an RS232 link between a piece of hardware (I have designed and am currently testing) and some software(which need testing).
I was hoping to have my hardware finished by now so I could get on with testing the software over Easter.
The hardware does not work yet but I would still like to test the software.
Does any one know if there a way to make a virtual serial port that I could put data on and read data off while my program accesses it as a regular serial port so I can check my code?
I am using Ubuntu 9.10 and am happy to give any more information on request.
View 10 Replies
View Related
May 16, 2011
I'm trying to solve an intermittant serial port problem on an embedded medical monitor. We have determined that the port is receiving characters from the external device but the serial thread is not transferring the chars from the buffer. this problem happens at start up about 1 in 50 boots. We're using kernal 2.6.29.6.
View 1 Replies
View Related
Aug 16, 2010
was wondering if there is an alternative method to using udev rules in order to get access to the USB serial ports. Is there a command to check the names and give them to you? I'm looking for something along the lines of "ttyUSB".
View 3 Replies
View Related
Oct 27, 2009
I have a character app running on a Linux server with a telnet thin client. This app requires 3 input values that I would like to be filled in from a scale indicator that is connected via serial to the PC running this app. I feel like this is doable but not sure how. The app is running in Progress 10.1B. Currently I can see the 3 values coming from the serial port with hyperterminal but I do not want to have to rekey into the app.
View 1 Replies
View Related
May 10, 2010
I'm trying to set rxtxSerial to work so a Java app has access to a serial port (via SiLabs CP210x driver, port /dev/ttyUSB0). When I use update-alternatives --config java, there are 3 alternatives which provide `java'. I have tried openJDK and Sun. Both fail but with completely different messages.
[Code].....
View 9 Replies
View Related
Feb 8, 2011
I need a serial port monitoring software that works on windows 7 64bit or GNU/Linux and supports at least RS-232. Bonus points are if it's free software or at least freeware. I just need to be able to see what goes in and what goes out of the port. At this time, I don't need any protocol deciphering or anything else complicated.
View 1 Replies
View Related
Mar 9, 2011
I want to create a virtual serial port in Fedora. I'm using Java code to communicate over a serial port. I want to test this code with out any serial devices connected.
View 1 Replies
View Related
Jun 30, 2011
I am new to Ubuntu and I need to establish a serial port communication between my PC and microcontroller MSP430G2452.
On connection the USB available with the Launchpad and using lsusb.
It identifies the port as:
Bus 005 Device 003: ID 0451:f432 Texas Instruments, Inc. eZ430 Development Tool
After establishing such a connection what I need to do? My aim is to send a byte of information in Linux.
View 1 Replies
View Related
Oct 7, 2010
I have a new problem tied to the same system as in [URL]Apparently when I send the output from
Code:
wget -q -O- http://<IP address>/<filename>.asp?LID=12345 |dos2unix
to /dev/ttyS0 (whether via > /dev/ttyS0 or via > <somefile> then cat somefile > /dev/ttyS0)
[code]....
View 9 Replies
View Related
Jun 1, 2010
I want to verify that serial port libraries are installed in my system.I know that it is installed at /usr/local/lib. But I dont know what all files are to be present in there, so to ensure that the same is installed properly. Iam using suse 11.1.
View 1 Replies
View Related
