When I plug in a usb flash drive, my Debian mount it, but when i am going to write, mkdir, rename file or paste a file permission denied.
The result of Code: Select alldev/sdc1 /media/usb0 auto rw,user,noauto 0 0
is Access denied
I have installed Debian on My Macbook Pro.
I want to be able to write to the HFS+ partition. I have disabled journaling on the HFS+ partion.
I have the following in my fstab:
But it still mounts as read-only.
I'm new to debian ,I was trying to mount my NTFS partition but I did that only with read permissions I couldn't install ntfs-config(allthough I have ntfs-3g installed).So I want to figure out how to mount my partitions with read/write permissions automatically as the systeme starts ?
View 2 Replies View Relatedsudden of all all USB drives and sticks I put into a PC will not mount with read/write permissions (they did before). I can still copy to them, but only when I am root. I am on Maverick I've noticed though that if I run disk utility, then UNMOUNT the partition, Check File System, Mount the partition back, I get read/write access..
View 9 Replies View RelatedI am running Karmic x64 on a HP laptop that has a cd/dvd burner. I have a r/w cd with files on it and I wish to add/remove files to it. After it mounts automatically on insertion, I unmount it and remount with:
sudo mount /dev/sr0 -t iso9660 -w /media/cdrom
(I tried assorted other hare-brained things also) but it always says that the filesystem is read only. Do I need to use a different device than sr0? Is it even possible under Ubuntu?
We have a network with several computer. We have two file servers (don't ask why) an Ubuntu and an XP as well as many clients. Setting shares on Ubuntu was easy and all clients can see them read and write. but I can't get the Ubuntu clients to see the SMB shares on the XP properly. This is my fstab:
Code:
//192.168.0.100/resources /media/resources smbfs iocharset=utf8,credentials=/home/boss/.smbcredentials,dmask=775,gid=1009 0 0
//192.168.0.9/summer /media/summer smbfs iocharset=utf8,credentials=/home/boss/.smbcredentials1,dmask=775,gid=1009 0 0
[Code]....
I don't want to have to download the kernel source and uncomment out CONFIG_UFS_FS_WRITE=yes and build a custom kernel ever time I update the kernel. Is there a better way? Like when Ubuntu.deb repositories claim a stable kernel is there an auto config script when installing from synaptic -or- aptitude? Like any way to add this one config opt to .deb kernel W/O building custom one from source?
View 3 Replies View RelatedAfter installing the "fuse" and "fuse-ntfs-3g" packages, my ntfs formatted thumb drive mounts read only, as follows:# mount.../dev/sdb1 on /media/disk type fuseblk (rw,noexec,nosuid,nodev,allow_other,default_permissions,blksize=4096)
View 17 Replies View RelatedI need some assistance mount a UFS2 partition as read and write. if its not possible, then I may have to copy a few hundred GBs of data. Currently using the command: Code: mount -r -t ufs -o ufstype=UFS2 /dev/sdb /Data Thats just read only.
View 7 Replies View RelatedI try
mount -t ntfs -o rw /dev/sdb1 /mnt/exthdd
it doesn't give me any response so I presume it succeeded but when I try to touch it, it tells me it's a read-only file system
I have created 700 GB ext4 logical partition on my HDD. It is named sda7. Now I don't have read/write permissions, only root has those permissions.
How to change read/write permissions and how to mount it permanently?
I used dual booting with Windows Xp and Ubuntu 10.04. Because errors, I reinstall Windows and then I could not enter GRUB, and Ubuntu partition disappear. I tried to reinstall ubuntu using live CD but I could not detect last ubuntu partitions. After I installed fresh Ubuntu on new partition, I got error message like this:
Unable to mount floppy0 Mount: block device /dev/fd0 is write protected, mounting read-only Mount: could not determine the file system type, and none was specified
I'm trying to configure a per user samba login for full access to the user's home directory.Mounting the shared directory works flawless when mounting from Windows. I can read, write, create without problems. However, when mounting from Linux the shared space is readonly.
View 8 Replies View RelatedI have a minilinux that I being working on, the problem now is that the serial ports doesn't seem to work (I have 4 serial ports).They don't write or read.
I run the command setserial g /dev/ttySx and it says that his IRQ are 3 or 4 (3 for ttyS0 and ttyS2 , 4 for ttyS1 and ttyS4)�but when I run the command: dmesg | grep ttyS the IRQ�s are 0 for ALL my serial ports� could be this the reason why my serial ports aren�t working right??? And if it is how can I solve the problem??
I just want to configure Vsftpd to allow users to have total access to the FTP server. The server and users are all on a private LAN behind a router with no access from the Net, so I don't need any security. The following basic configuration doesn't allow uploading files after I log on as anonymous/whatever:
/etc/vsftpd/vsftpd.conf
Code:
listen=YES
anonymous_enable=YES
local_enable=YES
write_enable=YES
xferlog_file=YES
#anonymous users are restricted (chrooted) to anon_root
#anon_root=/home/ftp/incoming
anon_root=/var/ftp
anon_upload_enable=YES
anon_mkdir_write_enable=YES
#chroot_local_user=NO
#chroot_list_enable=YES
#chroot_list_file=/etc/vsftpd.chroot_list
Here's what happens when I log on as anonymous/whatever and try to upload a file:
> ftp server
Connected to server.
220 (vsFTPd 2.0.5)
Name (server:root): anonymous
331 Please specify the password.
Password:<whatever>
230 Login successful.
Remote system type is UNIX.
Using binary mode to transfer files.
ftp> ls -al
200 PORT command successful. Consider using PASV.
150 Here comes the directory listing.
drwxr-xr-x 3 0 0 4096 Mar 13 11:19 .
drwxr-xr-x 3 0 0 4096 Mar 13 11:19 ..
drwxr-xr-x 2 0 0 4096 May 25 2010 pub
226 Directory send OK.
ftp> put /var/tmp/ftp
local: /var/tmp/ftp remote: /var/tmp/ftp
200 PORT command successful. Consider using PASV.
553 Could not create file.
How do i disable the linux file cache on a xfs partition (both read an write).
We have a xfs partition over a hardware RAID that stores our RAW HD Video. Most of the shoots are 50-300gb each so the linux cache has a hit-rate of 0.001%.
I have tryed the sync option but it still fills up the cache when copinging the files. ( about 30x over per shoot :P )
/etc/fstab:
/dev/sdb1 /video xfs sync,noatime,nodiratime,logbufs=8 0 1
Im running debian lenny if it helps.
I can mount the NTFS in read only mode, but i need write access too. how can i mount NTFS partition in read/write mode..?
View 12 Replies View RelatedI have installed a cable that connects from the CPU's SATA motherboard connection to a removable drives' ESATA connection.I would like to be able to swap drives on the ESATA connection and have all users be able to read and write to these drives.I have created the directory /archive/ where I would like the drive(s) to mount.The drives are all formatted Fat 32 - but in the future I may use HFS for formatting.When I used the command (as root):mount /dev/sdc1 /archivethe drive was mounted (but read only)What can I use in my /etc/fstab file that will allow drives to be mounted and unmounted by all users on the system? (both reading and writing)Also, will I be able to mount and unmount these drives without shutting down? or will I need to reboot every time I want to change drives?
View 2 Replies View RelatedI have a networked raid drive. Thecus 2100. Its running linux, and includes samba sharing. On that I have a folder shared. I can connect to and read and write from nautilus. No problems. However, I can't use other apps through that method. Its not really "mounting" that drive in the sense you'd normally think of (afaik).
If I try to mount the folder, no matter how I have tried so far (-t cifs, smbmount, etc), I can navigate the folders, but if I try to read any file I get a permission error. Looking at the permissions with 'ls -l', everything looks OK. The weird thing is, I can write a file, then read that file back as long as its the same session.
Just now I tried 'smbclient' with no special arguments. Just the server and path url. It asked for my password. Once I was in, I had no trouble getting files. I had a thread about this a while back and there were several links and all sorts of command line options to try, which I did, with no different outcome. I think its got to be something much simpler and more obvious. smbclient and nautilus seem to have no trouble. Anybody know what they're doing differently?
I have a Windows 2003 server with fiber attached volumes (NTFS) that I would like to mount readonly on a linux system to back it up to tape. The fiber device will allow me to present the volume R/W to one host and R/O to another, however, the R/O system doesn't see any of the changes made by the R/W server. In other words, how can I make a readonly volume refresh, scan for changes, or update without un/re-mounting it?
Is the "mount -o --bind" option what I want? From the MAN is doesn't seem right... the option "sync" seems slightly more promising but I think I'm just grasping at straws here. The best I have come up with is a cron job to unmount then mount the volume periodically.
I want to simply mount an ext4 file-system onto a normal mount point in Ubuntu (/media/whereever), as read-writable for the current logged-in user, i.e. me.
I don't want to add anything into /etc/fstab, I just want to do it now, manually. I need super-user privileges to mount a device, but then only root can read-write that mount. I've tried various of the mount options, added it into fstab, but with no luck.
I want to use dual Monitor on Debian Lenny amd64, I have the nVidia 8600 GTS. I googled several times, I have to change the xorg.conf (as it seems) but I can't - no rights.
And there's another thing... I have a dual boot system along with the openSUSE HDD but I can't open it. And using openSUSE I can't read or write on the Debian's HDD. How can I change that?
My Canon PowerShot A470 + CHDK can write to SD-cards that are "locked" (the lock switch is used to make the card bootable), but GNU/Linux
`/dev/mmcblk1': Read-only file system
(I'm using "Texas Instrument 5-in-1 Multimedia Card Reader")
So I have to switch that switch on and off again and again. ("unlocked" to write to the card in Linux, "locked" to boot the camera from it).
How to force locked card to be writable in GNU/Linux?
I saw a lot of people asking this question on the net and most (if not all) answers points out to disabling journaling on that partition, which is not always a good idea.
So here is 1-2-3 style how to mount HFS+ partition in Ubuntu, so that you are able to write on it:
1) sudo apt-get install hfsplus hfsprogs hfsutils
2) mount -o force -t hfsplus /dev/XXX /mnt/v
I am trying to get Debian 7.4 to burn 50Gb Blueray disks for backups using K3b. The GUI based program is important.
The reason I am using Linux Kernel 3.12-0.bpo.1-amd64 is that I am running an i7-4770K CPU and the motherboard a Supermicro c7-z87-oce (NO overclocking) and 32G RAM. I have had no other problems since using the backported kernel and turning off the onboard graphics and using an nvidia G210 graphics card.
The Pioneer BDR-209M CD/DVD/Blueray burner reads CDs and DVDs to the extent I am able to install Wheezy, and then use a backported kernel. However, it will not write CD's, DVD's and it won't recognize Blueray disks.
I have spent some time weeding through conflicting information and I wanted to verify there is not a work around. I have downloaded and installed the current version of cdrecord to no avail. I have completely removed everything CD/DVD/Blueray related and reinstalled, also to no avail.
Then I came across this statement from: [URL] ....
In all programs of the fork that send SCSI commands, you may be unable to access any of the CD/DVD/Blu-Ray drives at all if you are on Linux-2.6.8.1 or later. This is due to a missing workaround for the Linux kernel interface change that happened with Linux-2.6.8.1.
My CD/DVD combo can read/write DVDs but not CDs. I have tried to Google for a solution but didn't find any. I run the latest Debian Sid.Some information:
$ cat /proc/sys/dev/cdrom/info
CD-ROM information, Id: cdrom.c 3.20 2003/12/17
drive name:sr0
[code]...
I am running Lenny. USB storage devices are painfully slow, if the data to be copied is above 4GB it works on transferring for more than half an hour and then comes up with an error dialog(saying something like file size is too big). The problem exists in both read and write.
I did google a bit and here is the output of lsmod | grep hci
ehci_hcd28428 0
uhci_hcd18672 0
usbcore118192 4 usb_storage,ehci_hcd,uhci_hcd
[Code].....
I currently have a debian hpc server unit of 10 p4 computers running under debian lenny in use for serving my home network via pxe. I was wondering if there was anything I could use to allow the same read and write acces that is on my pxe machines on my new palm pre plus. That would save me the hassle of syncing all my documents and movies etc to my phone every day or so.
So basically what I am asking is if I can use the current 5tb nfs raid and mount it some way to a remote ip that I can access fully on my phone without the need for a flash plugin. Btw the phone is homebrew app ready.
I have 64GB USB stick NTFS formated. I'd like to exchange files much bigger than 4GB between windows and linux. FAT32 doesn't support files bigger than 4GB. Is it possible to mount NTFS RW under Debian Lenny?
View 3 Replies View RelatedI have a Western Digital "My Book" on my network which I have mounted with cifs.
If I go into it and vi a file, all is fine. I can write and save and close. When I open the file and add to it and then try to write it again, I get the message:
"thefilename" E212: Can't open file for writing
The file is owned by me still and the permissions are -rw-rw-r--
I don't understand why it works the first time and not the second. Also this same effect is observable when I save from another program to there. The first save is fine, the second can not be saved.