I've been trying to rsync only files with mca in their filename but it's sending the whole lot across.
Code:
rsync -dtv --include='mca*' /source/source/source/source/source/source/source/ /dest/dest/dest/
Is there a way for me to rsync two directories comparing only filenames (and not file size, date modified, or any other criteria)?
View 2 Replies View Related$ uname -a
Linux a 2.6.35.10-74.fc14.i686.PAE #1 SMP Thu Dec 23 16:10:47 UTC 2010 i686 i686 i386 GNU/Linux
$ lsb_release -a
LSB Version: :core-4.0-ia32:core-4.0-noarch
[Code].....
How can I set a pattern that will output a filename equal to the original filename? E.g.
something.mp3 → something.ogg
And why isn't this implemented in SoundConverter?
PS: {Filename} doesn't work.
I run 5GBFree.com a free hosting site. As you can imagine, it gets quite a few people signing up to abuse the service.Recently I've found a LOT of people setting up sites with a particular script that floods forums and IRC chat rooms. The names of the files are as follows:
peindom1.php
peindom2.php
peindom3.php
peindom4.php
Is there a command I can run to remove files with these filenames ANYWHERE on the server (so basically, a command to go through all folders on the server and remove instances of that name
What is the difference between filename and ./filename? Under what circumstances is one preferred to the other?
View 5 Replies View RelatedI have many files in a folder for example
Kiran.txt
Kiran1.txt
Kiran221.txt
Kiran144.txt
Time.csv
[Code]...
From this directory, I want to know how I could use grep to display files based on part of their filename - for example those starting with "Account" or those ending in ".sh".
I just tried to sync files from one server to another. After the sync process, I found the files are bigger than original ones.
I looked up the web and found someone mentions the rsync daemon. So I have to run the daemon on one server before I run the rsync?
The command I used is rsync --partial --progress -r source destination
use rsync to cp such files and dirs under /var/www/html/mydir directory but these two files(/dir4/1.html /dir4/2.html) cant rsync to dest mechine.
rsync configure file,below...
I'm trying to using rsync to backup some files, about half a TB. It's now it a state where it keeps sending the same files everytime it runs. for example:
rsync -av /data/source/* user@host:/data/dest
sending incremental file list
source/file1.txt
source/file2.txt
I then verify those files are copied over. then the next time it runs it does the same thing
rsync -av /data/source/* user@host:/data/dest
sending incremental file list
source/file1.txt
source/file2.txt
any idea why it's getting stuck on these files? I've tried to wipe the whole dest directory out and start over but no luck.
I have two directories, dirA whicht contains N gb of data and dirB which is supposed to contain only the newest M gb of data from dirA. When files are added to dirA, they sould also be added to dirB, while the oldest files in dirB should be deleted.Is that possible with rsync? or any other software?
View 1 Replies View Relatedrsync -r -v -e ssh root@nn.nn.nn.nn:/usr/local/websites/* /usr/local/websites and each time I run it it copies everything - all files. I thought rsync was only supposed to copy files that had been added or modified.
View 3 Replies View RelatedWhat would be the easiest way to go about rsyncing the n newest files in a directory to a remote server?
View 2 Replies View RelatedI'm using the command below to sync two directories. Problem is insted of deleting the files on the target directory it simply appends a ~ character at the end of the file name. Not sure why this is happening?I'd like to have all deletes on the source replicated on target.
View 2 Replies View RelatedThis is a quick one, I don't have any problems yet, I just want to check that this is going to do what I think it is. I added the line
Code:
00 01 * * * rsync -avz --delete /local-storage /mnt/usbackup
to my crontab file, am I to understand that this will backup /local-storage to my external
[code]...
I was going to do a rsync -r -a -z -v -p -e sshto move some files frome server to another, but then realized all I really need are files which have dates starting June 1, 2008 to current. Is there a way to have rsync only sync those files?he directory structure that's my source goes all the way back to 2004.
View 5 Replies View RelatedI am trying to move all the txt files with a script from multiple directories to one directory, adding the parent directories of the files to the file names.It's a little complicated to explain, but i hope the script i have so far explains what im trying to do better:
Code:
for i in `ls /home/monty/scripting`
do
[code]...
If transfer all files under a directory by rsync, what is the order that rsync determines to transfer the files one by one?At first it looked like rsync transfers files in alphabetical order, but later I found rsync skipped some files in the first sweep through the alphabetic order, and then went back to transfer files that were skipped in the first time and this time still in alphabetic order.
View 1 Replies View RelatedI was wondering if there is a way to tell rsync to only apply changes (delete, overwrite,create) only if all files in the file list transferred successfully.Just to clarify, this would essentially be putting a transaction around the transfer.
View 3 Replies View RelatedRecently i am trying to check on the rsync speed for single file(2.4GB iso) directory ( 900MB directory with files inside ) When i run the rsync for single file: the speed i get is average 50MBps However, for a directory: average speed is 10MBps Is there any reason behind this ? i tried to google but unable to get the concept.
View 2 Replies View RelatedFor backup purposes, I have been trying to find out a solution for Rsync -avr sourcefolder targetfolder with Skipping 0 bytes files option.
However it seems that they are no solutions. Would someone have an idea, to skip to source files into the sourcefolder that have no content, ie. 0 bytes?
I have recently purchased an external hard drive in order to backup my home partition. In my PC I have a "1.5T" drive with several partitions on it, containing OSes and the home partition. The home partition is 1.3T according to df, the external drive contains one partition that spans the entire disk,df reports it as 1.4T in size. Both partitions are ext3. When I use rsync to copy files from the home partition to the external partition, the external disk becomes full, despite the destination - supposedly - being larger than the source. I don't understand why copying files from one partition to a slightly bigger partition should need more space than on the source partition. Does anyone know what is happening ?
Details : I created the partition on the external drive with gparted; gparted reported it the already have several gigabytes in used space immediately after the partitions creation - I thought at the time that this must be normal. The home partition contains many files of all sorts, including lots of big audio and video files. If you are wondering, for all my important files this external disk is only secondary backup, as they are also backed up to the "internet".
These are the mount points :
/mnt/tmp/ : home partition, /dev/sdb6
/mnt/external/ : external partition, /dev/sdc1
I used rsync to copy the files, I know there are more efficient ways to do this, but I wanted to use the same command that I will subsequently run to sync the backup.
rsync -av --progress --stats --recursive --perms --links --delete /mnt/tmp/ /mnt/external/
Next I tried adding the --sparse switch, as I was wondering if the problem may come form sparse files. I don't know however if rsync would go back and shrink the sparse file by just adding the switch and executing the command. I also added --one-file-system, for good measure. Here is what I ran next :
rsync -av --progress --stats --sparse --one-file-system --recursive --perms --links --delete /mnt/tmp/ /mnt/external/
I tried an fsck on the home partition :
fsck -f /dev/sdb6
This is the output from the last rsync :
rsync: writefd_unbuffered failed to write 4 bytes to socket [sender]: Broken pipe (32)
rsync: write failed on "abcd.avi": No space left on device (28)
rsync error: error in file IO (code 11) at receiver.c(302) [receiver=3.0.6]
[code]....
Looking at the destination after a partial copy seems to indicate that the problem is not symbolic links being "expanded". I have not checked the source filesystem for sparse files, nor the destination to see if these files could be larger there, as this does not seem trivial.
Here is some additional info :
$ df /mnt/tmp/
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sdb6 1415342836 1414173740 369096 100% /mnt/tmp
[code]....
We have an rsync cron job set up to mirror all the files in a "..dashtdocsdocs" folder to the same folder on another server. It copies all the files over correctly and deletes any files in the "docs" directory that aren't in the sending directory, but it also deletes any files we put in the target directory's parent folder (..dashtdocs or other subfolders like ..dashtdocsimages) even though they've been excluded in the .rsync-filter file.
Here's our current rsync .sh:
/usr/local/bin/rsync --stats -qPzrtpl --delete --password-file=/var/run/.appprodrsync --log-file=/export/home
/webuser/logs/rsync-extranet-log -FF /export/home/ appprodrsync@appprod::dprweb_extranet/ > /export/home/webuser/logs/rsync-extranet-output 2>&1
[code]....
So for example server A has ..dashtdocsdocs and ..dashtdocsimages. Server B has ..dashtdocsdocs but if I manually copy the images folder over to ..dashtdocsimages, the images folder gets deleted from the target directory every time rsync runs.
A: ..dashtdocsdocs
..dashtdocsimages
B: ..dashtdocsdocs
..dashtdocsimages (<-- gets deleted everytime rsync runs)
I'd like to keep just the docs directory synched and update other folders manually, but they keep getting deleted. It looks to me like it's running a delete-excluded option, but that option wasn't used.
I am trying to do a find/grep/wc command to find matching files, print the filename and then the word count of a specific pattern per file. Here is my best (non-working) attempt so far:
wc `find . ( -name "*.as" -o -name "*.mxml" ) -exec grep -H HeightResizableList {}` ;
I have a big iso image which is currently being downloaded by a torrent client with space-reservation turned on: that means, file size is not changing while some chunks in in (4 Mib) are constantly changing because of a download.
At 90% download I do the initial rsync to save time later:
$ rsync -Ph DVD.iso /media/another-hdd/
sending incremental file list
DVD.iso
[Code]....
Then, when the file's fully downloaded, I rsync again:
total size is 2.60G speedup is 1.00
Speedup=1 says delta-transfer was not used, although 90% of the file has not changed, target dir is on another FS and copying takes several minutes. Why doen't it try to speedup the transfer?! How can I force rsync to use delta-transfer?
I have rsync error message for this command,
Quote:
rsync -avr --delete --exclude lampp/tmp/* /opt/* /backup/opt/
rsync -avr --delete --exclude data/session/* /var/www/html/dmcatholic/* /backup/dmcatholic/
The error message is here.
[code]....
sent 1917154 bytes received 384128 bytes 5731.71 bytes/sec total size is 12220966785 speedup is 5310.50 rsync error: some files could not be transferred (code 23) at main.c(892) [sender=2.6.8]
i would like to find and backup all *.mp4 files from /Pictures and its sub-directories and move them to a single directory on a remote. I can find and move the files but I don't want the directory structure...just the files to be placed in the remote directory.
To find my files I use
rsync -r -a -v -e "ssh -l user" --delete --include '*/' --include '*.mp4' --exclude '*' /home/drew/Pictures/ remoteserver:/Users/drew/mp4
but this creates all the subdirectories
I also tried
find ~/Pictures -name "*.mp4" -exec rsync -r -a -v -e "ssh -l user" --delete {} remote:/Users/drew/mp4 ;
This works but takes forever
I'm currently trying to organize a media server so that things will be in some kind of logical order rather than the current setup of dumping everything of a certain content type into a single folder. However, the size and diversity of content within these disorganized folders precludes me doing things manually. Does anyone know of a program or script that could sort the files into folders based on part of a filename
View 7 Replies View RelatedIs there really no way of having with a GUI an indexed file search by filename (not contents etc) which gives a detailed list? Great big icons as a "result" is no good to me, I want "details" that I can then click on to either open or copy etc. I tried the totally useless "Tracker" and Zeitgeist in my 11.04 is no better. There is a fantastic product in the win environment called everything.exe which does exactly what I want. I cannot be alone in this type of requirement. It has to have a GUI.
View 9 Replies View RelatedI need to split a filename into its filename and extension, so I can append a datestamp to the filename. I'm using bash.
View 8 Replies View RelatedI've installed ethernet adapter, it is made in china from a manufacturer called FOX. The driver for that adapter is supported for sco linux kernel version 2.4.x and 2.5.x .However, I'm using Centos5 but the OS didn't recognize the adapter alone, so I'm trying to follo instructions on the driver on the attached CD.
The CD contains file named "SC92031.c", the instructions tell me to do the following "Compile the driver source files and it will generate sc92031.o"
