Software :: Added An Cc File To An Tcl Script And Compile

Feb 11, 2011

im nirmal r ..i have installed ns2 in redhat 5.i have added an cc file to an tcl script and while compiling the make in terminal it shows me like this..(i have tried to enable the propertise but i con't)

[Code]....

View 1 Replies


ADVERTISEMENT

OpenSUSE :: File Dialogs Do Not See New Added Files

May 1, 2011

This has been bugging me since I upgraded to 11.4. First I noticed that most of the time when a file is copied from an application (say, downloaded from Firefox) in to a directory that Konqueror does not show the new file until I hit "Reload".OK, I could live with that, annoying as it is. Why it can't recognize that a new file has been added to the directory since the last display refresh when I switch to that window I don't know, but fine, whatever.

Then I installed Firefox 4.0 - and now frequently when I open the "Save As" file browse dialog, it doesn't see any of the files recently added either. I put in a complaint to Mozilla, but apparently only ONE other person on the planet has ever seen this happen. But it was never the case before, either in earlier Firefox or earlier openSUSE releases. I was always able to see the files I previously saved to that folder when saving a new one.

And today it happened in Kaffeine which I don't remember ever seeing before. I opened the "Open File" dialog and it couldn't see a video file I had just downloaded. When I closed Kaffeine and then restarted it, it could see it.Is this something that has been ongoing or is it new? I can't find anything via Google Search to explain it. Is there some setting somewhere that needs to be tweaked? Is it a file system problem?

View 3 Replies View Related

Ubuntu :: Can A File Be Added To The Places Menu

Jan 20, 2011

wondering if it's possible to add a link to a file in the Places Menu? for example a link to a Writer file I use a lot. I see how to add folders, but is it possible to add files?

View 9 Replies View Related

General :: Routes Are Not Added As Defined In Rc.local File....why?

Jan 24, 2010

I need to setup my ubuntu pc single nic card ip as 192.168.1.6 for internet and 10.172.170.95 and 135.10.86.100 for my lan and for another network through my 4port DSL modem.So i defined like this.Except addition of last two routes(10.0.0.0/8 & 200.200.176.0/24) everything worked as defined, what is the mistake i did?

In /etc/network/interfaces file

auto lo
iface lo inet loopback[code]............

View 1 Replies View Related

Ubuntu Multimedia :: Arista- Nothing Happens When File Is Added To Queue

May 25, 2010

I just downloaded Arista to convert avi's to mpegs for DVD's and also to view on a mobile device.I add a file "movie.avi" as the source and device as DVD and then click "add to queue" and the file appears in the queue but nothing happens.Also I believe that I have now downloaded all of the necessary gstreamer packages including the ugly multiverse.

View 2 Replies View Related

General :: Perform Some Tasks When New File Is Added In Folder

Feb 21, 2011

I have a folder named "logs" which contains log files. I would like to have a bash script or a cron job or something like this which will check the folder continuousy and perform some tasks (for example echo "New file is created") every time a new file with pattern like "Screen.log.***" is created in the folder "logs"
Is it possible in Linux?

View 14 Replies View Related

Ubuntu :: Iso File Extraction - Go Through 3500+ Rom Files And Delete Added ;1 To Nes Extension

Aug 15, 2010

I downloaded an ISO of some nes roms and used the archive manager to extract the files. It extracted them but it added a ;1 to the end of the extension. I don't want to go through 3500+ rom files and delete the added ;1 to the nes extension. How can I prevent this in the future?

View 3 Replies View Related

Security :: Created A .htaccess File In The Folder And Added AuthType Basic?

Jan 26, 2010

I have a folder on my server i want to protect with http authentication but i have problem. i created a password htpasswd -c .htpasswd razzera

then i created a .htaccess file in the folder and added
AuthType Basic
AuthName "Restricted Files"
# (Following line optional)
AuthBasicProvider file
AuthUserFile /.htpasswd
Require user razzera

but when i go tho the folder it wont request any login details. why ??

View 6 Replies View Related

OpenSUSE :: Updated To 11.4 [64 Bit] - Rkhunter Is Giving Warning: User 'rtkit' Has Been Added To The Passwd File

Mar 13, 2011

i have just updated to openSuSE 11.4 [64 bit]; rkhunter is giving these Warnings :

Warning: User 'rtkit' has been added to the passwd file.
Warning: User 'pulse' has been added to the passwd file.
Warning: User 'statd' has been added to the passwd file.
Warning: Changes found in the group file for group 'audio': User 'pulse' has been added to the group
Warning: Group 'rtkit' has been added to the group file.
Warning: Group 'pulse' has been added to the group file.
Warning: Group 'pulse-access' has been added to the group file.
Warning: Suspicious file types found in /dev: /dev/shm/initrd_exports.sh: ASCII text
Warning: Hidden directory found: /dev/.sysconfig
Warning: Hidden directory found: /dev/.mount

Do these look Normal, Are these False-Positives??

View 4 Replies View Related

OpenSUSE :: Compile A Tar.bz2 File?

Mar 27, 2010

How do I compile a tar.bz2 file I have never successfully done it. I really want to do it for mac on Linux.

View 9 Replies View Related

Ubuntu :: Can't Compile Tar.bz2 File / Do That?

Aug 13, 2011

I need to downgrade my firefox from 5 to 3.6 I downloade the tar.bz2 file but after I extracted and cd to the file I got these errors when trying to install code...

View 1 Replies View Related

Fedora :: Unable To Compile .cpp File?

Jan 31, 2011

unable to compile a simple C++ programme (.cpp file), on compiling the file with gcc or g++ the following error is displayed, but the above command works in Redhat EL. the error message is:"fatal error: iostream.h: No such file or directorycompilation terminated."an anybody suggest to compile a C++ programme in Fedora 14.

View 10 Replies View Related

General :: Compile And Run A Cpp File Using Only One Command?

Jun 24, 2010

Recently I've started to learn cpp language on linux,and now I run a cpp file using following commands. g++ -o xxx xxx.cpp./xxxIs there a way to make it one line command such as compile-and-run xxx.cpp?

View 5 Replies View Related

Ubuntu :: Compile The Cpp File By Make?

Feb 3, 2011

how to compile the cpp file by make?

make -w file -> does not work!
make -f file -> does not work!

View 4 Replies View Related

Red Hat / Fedora :: Compile A Tar.gz File In Centos5?

Jan 18, 2010

howto compile a tar.gz file in centos5ORhow can i create rpm from tar.gz file

View 1 Replies View Related

General :: Not Able To Compile Source RPM File

Oct 15, 2010

I am trying to build a source rpm file through a source rpm package but while compiling I am getting the below errors as,

[root@nisserver tmp]# ls
gconfd-root mapping-root ssh-kvrIrp2633
keyring-fgwCIY nmap-5.21-1.src.rpm virtual-root.2hSYRa
keyring-vx1pvB orbit-root

[root@nisserver tmp]# rpmbuild --rebuild nmap-5.21-1.src.rpm
Installing nmap-5.21-1.src.rpm
warning: user fyodor does not exist - using root
warning: group fyodor does not exist - using root
warning: user fyodor does not exist - using root
warning: group fyodor does not exist - using root
Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.49535 .....

RPM build errors:
user fyodor does not exist - using root
group fyodor does not exist - using root
user fyodor does not exist - using root
group fyodor does not exist - using root
Bad exit status from /var/tmp/rpm-tmp.73783 (%build)

What next step need to be taken to install the rpm file from the source file.

View 6 Replies View Related

Software :: Failing To Compile C File?

Apr 4, 2011

i trying to compile courier-imap-3.0.8 (no te latest version but that's a requirement) using gcc 4.4.5 (Debian 5) I ran:Quote:./configure --enable-unicode=iso-8859-1,utf-8And went Ok with the verification, but when ran Quote:makeI got:

Code:
Compiling checkpassword.c
checkpassword.c: In function 'authcheckpassword':

[code]....

View 3 Replies View Related

Software :: Compile A File In Ubuntu?

Jan 13, 2011

im trying to compile a file in ubuntu and it says i need libzmq. anyone could post a link or something so that i could install it i would be very happy.

View 6 Replies View Related

CentOS 5 :: How To Compile Tar.gz File In Centos5

Jan 18, 2010

how to compile a tar.gz file in centos5 OR how can i create rpm from tar.gz file

View 2 Replies View Related

General :: Compile Multiple File Using Makefile ?

Jun 1, 2011

How to compile single file in Linux environment using gcc. Now i dont know how to use make file to compile multiple file.

View 5 Replies View Related

General :: Shortcut To Compile Kernel File?

Nov 5, 2010

I become successful to download kernel, compile it and run it.BUTWhen i modify tcp.c file or any other file in this /usr/src/linux/net/ipv4 location, (just modifying c files) i have to compile the complete kernel every time, which is very time consuming procedure.So Please help, How to compile that net/ipv4 package or etc.

View 5 Replies View Related

Software :: Stdio.h - File Missing During GCC Compile

Mar 3, 2011

I have looked at the other threads and found nothing which pertains to my issue. I am using an older version of Debian 4.0 I cannot upgrade until I have a 2nd server running. I lost the 4.0 installation disks. During an apt-get install i did, I foolishly changed sources.list to other sources on the net which changed dependencies and removed needed packages, such as perlmagick, Crypt-SSLeay, aptitude, and possibly the glibc - ( my current glibc was changed to glic6). Since I have found my original 4.0 disk. restored the sources.list. ran an update. and restored many of the packages that were removed. (a big lesson to me I will never do that again)

Here is a simple program:
#include <stdio.h>
When I run a gcc or I use cc compile
I get this message: "stdio.h": No such file or directory found.
Yes I know I missing the file stdio.h. I have looked
in /usr/include /usr/lib nothing.

Apparently during my mistake the system installed the glibc6 and removed the "stdio.h" file and other dependencies. I would like to get back to where as was in terms of the glibc version I had. Aptitude currently shows the following packages that are available to me

Code:
DEB1:/etc# aptitude search glibc
v glibc-2.3.6-2 -
v glibc-2.3.6.ds1-1 -
p glibc-doc
- GNU C Library: Documentation
v glibc-pic
p libg++2.8.1.3-glibc2.2
GNU C++ extension library - runtime version
p libstdc++2.10-glibc2.2
- The GNU stdc++ library
DEB1:/etc#

The question is which one should I install, to get my "stdio.h" back again? Would I have to uninstall glibc6 first? Uninstalling glibc6 displays a big warning. Is there a way I can download just the "stdio.h" files?

View 5 Replies View Related

Programming :: Can't Compile C++ - Execvp: No Such File Or Directory

Mar 2, 2011

i was trying to Compile my c++ program..cme across this problem....but my c programs are getting compilied without any problem.I am using fedora 14. Below is the way terminal reacted to my program..

gcc prog1.cpp gcc: error trying to exec 'cc1plus': execvp: No such file or directory

View 4 Replies View Related

Programming :: If Modify Tcp.c Stack File And How To Compile

Nov 4, 2010

i have just modify tcp.c file in/usr/src/linux/net/ ipv4 location.Now should i compile the complete kernel?if not then how to compile that net/ipv4 package or etc.

View 1 Replies View Related

Fedora :: Kernel Compile With Encrypted File System?

Dec 9, 2009

I am trying to replace just the kernel (no modules) for my default kernel on FC 11. I use the default .config file and just change a few things and then run the make command. After I replace the kernel and reboot the system the password comes up for the encrypted filesystem and it does not take my password for some reason. what I need to do to get this working?

View 1 Replies View Related

Ubuntu Installation :: Compile The Driver File Manually?

Jul 27, 2010

Here any know how to compile the driver file manually?

For example i have been insert the Realtek Ethernet card in my customized kernel and kernel can't detect the card. I know the c file 8139too.c which going to use by the realtek Ethernet card.but i don't know to how to compile the file and make this as a kernel module..

View 2 Replies View Related

General :: Compile An Application And An Driver File For ARM Platform?

Apr 22, 2010

I am new to the embedded domain.I am learning about cross compilation. Just i want to compile an application and an driver file for ARM platform. I have downloaded the toolchain binaries from [URL]..

View 3 Replies View Related

General :: Compile A Pascal Object File With A .o Extension ?

Mar 27, 2010

I have been trying to compile a pascal file using fpc. I succeeded using the command fpc pas1.pas, but this gave me a new object file pas1.o. How do i compile this file to get my output. gcc -o pas1.o does not work.

View 2 Replies View Related

Programming :: DataBase In Python - Compile .py Files Into A .exe File

Jun 20, 2011

i am new to python programing and i have a couple of ?'s

1- what would i do if i needed to find the closest, bigger number, from a list of numbers when the user types a number in.

2- (windows) i need a program that can compile .py files into a .exe file so that it works on a machine without python it also needs to work with python 3.2.

View 8 Replies View Related

General :: Can't Compile Gcc - Fatal Error: Stdio.h: No Such File Or Directory

Feb 19, 2011

I am trying to upgrade my NAS with anew toolchain, gcc-4.5.2. The NAS have been "hacked" fonz_plug, that contain a gcc version 4.1.3 with uClibc. I have download all needed tar files and done the following.My goal is to upgrade the gcc to 4.5.2 and replace the ucLibc on the system with a GNU libc.

# Pass one
#
# binutils
./configure --prefix=/ffp --libdir=/ffp/lib --includedir=/ffp/include --with-gmp=/ffp --with-mpfr=/ffp
But when I try to compile the gcc with
../configure --prefix=/ffp --libdir=/ffp/lib --includedir=/ffp/include --enable-__cxa_atexit --with-float=soft --enable-languages=c,c++ --with-build-sysroot=/ffp --with-build-time-tools=/ffp/bin --with-system-zlib --enable-threads=posix --disable-bootstrap

[Code]...

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved